Intermittent weirdness on Crop used to display "before" state
Running LR3 under Windows 7 64-bit, 12GB RAM, I'm seeing this phenomenon:
In Develop, when I display the "before" state of an image, usually the current setting of Crop is maintained -- i.e., switching between the current Develop history state and the Before state changes the values of the parametric settings, but does not change the Crop setting. This behavior is what I believe is normal, as was always the case in LR2.7.
However, from time to time, when the Before state is displayed, some Crop setting other than the current (most recent) setting is applied. In some such cases, it appears the Crop setting which had been in effect at the point in History corresponding to the Before state is used.
Further observation: When the problem appears (i.e., the current Crop setting is not being maintained when toggling to the Before state,) switching focus to a different image, then back to the image at hand, corrects the problem.
Similar Messages
-
How can I edit photos on iPad 1? I want to rotate photos, crop them, etc. Is there a specific mode that I have to be in to edit? I believe it used to work before I "upgraded" to ios5. Would like any help here. Thanks
Editing photos in the Photos app is not supported on the first gen iPad - and didn't exist prior to iOS 5.
Edit - iOS 5 features by iPad version : http://support.apple.com/kb/HT4559 -
"0" doesn't display before comma in float numbers...
Hi fellow APEX users,
Have you ever experienced this issue with float numbers in your APEX forms?
When I type float numbers between -1 and 1 in forms (e.g. 0,7 or -0,2), and after having submitted the form then reloaded it for editing, "0" doesn't display before the comma.
For example I got:
*,7* instead of *0,7*
-,2 instead of -0,2
etc.
If I look in SQL Workshop, I see the same (no "0") but I'm pretty sure that the value is properly recorded in the database.
The thing is that it's not very nice for the end users, as they can think the value is wrong.
Does anybody have a solution to display proper float numbers with "0" in the forms?
For info I use the NUMBER type.
Any help much appreciated!
Thanks,
Romain.
Edited by: romain.apex on Feb 5, 2012 8:30 PMHi Peter!
Of what type is your item? Display as text or do you use the item value for further computations.
If it is only for means of displaying the correctly formatted number, I'd change the item source to a query and would equip the desired column with a to_char function like:
select to_char(str_be_main, 'fm999G999G990D00') from yourtable where ...You could also use a post calculation computation and enforce the format there:
to_char(:P2027_YOUR_ITEM,'fm999G999G990D00')Maybe this helps!
Brgds,
Seb
Edited by: skahlert on 11.02.2011 07:53 -
Using Cinema Display - Please Help
Hi All,
I have been working with my new 15" MBP and loving it, not one problem to report! I will be traveling with the MBP and when I come home, I would like to use this computer with my cinema display and apple wireless keyboard and all of my other home office stuff. Can you please tell me the correct way to use my cinema display with the MBP, I have never owned a laptop before - but this MBP is clearly better than my old G4 Powermac and I would like to keep everything on my new MBP rather than using two computers anyway.
Also, is there an extension cable available for the cinema display to run from the monitor to the MBP?
Thanks!It would be nice if you could be a little more specific with your request. The only correct way to use a display is to plug the DVI cable into the MBP. There should be something in display in your system prefs that will give you the option to mirror you laptop on an external display. Once you do that everything else should just work (assuming you plug it all in). When you say an extension cable you mean just for the video portion, right? Not any usb/firewire ports? If it is just DVI take a look here. http://www.newegg.com/Product/Product.aspx?Item=N82E16812712028
that is a 10 foot dual link DVI cable. It will support through a 30" display so that should be a great cable. I hope this helped. -
Using two displays simultaneously
Skipping over the unnecessary details, this is what I'm trying to do.
I'm on a MacBook. I want to have a video game running on my MacBook's screen, while having firefox displaying on my TV, and I'll have a movie streaming from Netflix.
I'm not too experienced with Macs, is this possible? I already have the proper cables and I've used the TV before as my monitor, but I haven't figured out how to display two different things on the TV and on my MacBook's screen.
Thanks in advance for any helpsmiledk wrote:
Skipping over the unnecessary details, this is what I'm trying to do.
I'm on a MacBook. I want to have a video game running on my MacBook's screen, while having firefox displaying on my TV, and I'll have a movie streaming from Netflix.
I'm not too experienced with Macs, is this possible? I already have the proper cables and I've used the TV before as my monitor, but I haven't figured out how to display two different things on the TV and on my MacBook's screen.
Open the "Displays" panel of System Preferences. Select the "Arrangement" tab, then uncheck "Mirror Displays". -
Use "grid display" for background job of RM07DOCS / MB51
Hello experts,
When you execute program RM07DOCS with transaction MB51, it uses a "hierarchy display" for the output, a list of material documents. User can then use the menus for "Goto>Detail List" and the display changes to a "grid display".
If we define a background job for program RM07DOCS with a variant, the program uses the "hierarchy display". Is it possible to use "grid display" instead? do we need to call a different program?
Thanks.
Raul VHi Raul,
Copy standard program RM07DOCS to ZRM07DOCS
Then add this code "PERFORM detail_list."
before the code "CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' "
This will solve your problem.
Regards. -
Using FM10/RH9/Windows XP
I conditionalized all of my graphics in Framemaker to not display before I linked the book file to RH. On the Conversion Settings dialog box in the FrameMaker Settings list box, I selected Other Settings and then selected the Apply FrameMaker Conditional Text Build Expression so that the anchored frame would not display as an empty line in RH. But the space is there. This used to work fine.
In FM, all images are wrapped in a fig tag. Everything looks great in FM, great in RH, not so great in FlashHelp.
Thanks for the help.We are using conditional text to put a BETA watermark in the left margin of the doc. No other conditions than that.
I actually used FrameSLT to write a script to conditionalize the graphics. This is the expression I used:
self::Fig[image]
By text markers, do you mean the Show Condition Indicators on the Show/Hide Conditional Text dialog box? -
With the new OS do you still need the iprocessors to use multilple displays on AppleTV
I just downloaded the new OS and it seems they made some improvements with the multiple displays. Current I don't have the i processors so I cannot use the mirror feature with Apple TV, does this new OS still require those processors to use multiple displays with Apple TV? I have a Mac Book Pro that was purchase about a month before the new Macs were issues with the i processors.
None of the people I know have needed to use a bumper or other case with any of the iPhone 4s. The reports on the antenna problems have been rather overblown. Anyway, there's been nothing to indicate that the white iPhone 4 has any changes to the hardware other than a minor change to the proximity sensor and perhaps the camera flash.
Regards. -
My Crop Tool now displays a Diagonal instead of a "Rule of Thirds". I do not know why or how to correct.
Secondly, the "Apply During Import" portion of the right hand panel has disappeared. Thus I am unable to use custom setting while importing. I don't really know if this happened during upgrade to LR5.4 or not.
Any help greatly appreciated!!!You probably pressed the O key which cycles through the crop overlays when the crop tool is enabled.
Click Tools / Crop Guide Overlay in Develop to see the various choices. -
I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?
Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s -
Using Dual Displays G5 Dual Core 7800GT
Hi Gang
Happy Thanksgiving.
I'm editing strickly in SD with an older G5 Dual Core 2.0 - 14GB RAM and nVidia GeForce 7800GT 256MB Dual Port DVI Graphics Card. Most Final Cut editors utiliize dual displays. That being said, wondering if I'd be better off with a PCIe nVidia Quadro FX4500 512MB. I believe my friends Chris & BD here on the forum, may prefer the speed of the nVidia Quadro FX4500. I'm also trying to avoid bogging down the system.
Thank you
MikeHello Diesel
Don't think we've connected before. And please don't be offended, I'm a 65 year old Mac user who highly regarded Chris's expertise. He was a bit older than most here, and his experience was impeccable. In my qualified opinion, I've been witness here to countless examples of concieted bloatness and inaccuracy. More so on the FCP forum. In fact, sometimes, despite the higher star rating of a responder, I'll eventually solve my own problem contrary to a short rude incorrect reply, (as though they may appear higher than mighty). But of course this is typical of any forum.
In short, I've found the answer many times lies in different respones from different people. You just have to search.
Getting back to my ole friend Chris, I'm gonna guess he finally got peturbed with all the 'Arm Chair Quarterbacks', (more now than ever).
In any event, here's Chris's well researched list, and I see the X1900 is listed as weaker than the 4500.
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html
I think the answer is that the FULL SIZED nVidia card, (two slots - 512MB), could be more powerful thus preventing a slow down when using two displays.
http://www.ebay.com/itm/Mac-G5-Apple-PCIe-nVidia-Quadro-FX4500-512MB-Video-Card- MUCH-FASTER-THAN-7800GT-/281164366332
The other advantage with nVidia, (as taught by Chris), is that XTI cards do not have temperature sensors. I use Temp Sensor all the time. -
I have a Samsung Lap top but would like to use Cinema Display. The only connections on my lap top is HDMI and VGA. How can I get it to work?
Thanks Malcolm. I saw this on the apple site
Kanex C247D Single-Link DVI to Mini DisplayPort Converter
Will that work?
I also spoke to someone at apple..They told me to get 2 cables. Mini DisplayPort to Dvi and Dvi to Hdmi..Connect the 2 and it will work...Do you think it will work? Just to save$$$ -
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
Custom cropping using pixel dimension
The banner image module for my website requires images cropped to 940 x 400 pixels. When I use the Custom cropping function in PSE 12 (on a Mac OSX 10.9.2), it only shows a cm dimension. Can I do a custom crop using a pixel dimension?
You should just be able to type 940 px and 400 px in the width and height fields
Another way is to use the Rectangular Marquee Tool and use Aspect>Fixed Size then enter 940 px X 400 px -
I have upgraded my iPhone using IO6. Before doing this operation the advises to me is to back up the phone, which I did using iCloud.
When I tried to restore the back it does not access my password which I have given to restore my password.if you cant remember the password of your back-up encryption, you can't back it up
You will have to restore as a new phone
Maybe you are looking for
-
Inserting pdf files in word for mac
For the life of me I can't figure out how to insert pdf files in my word for mac document. I can insert the first page of the file by inserting it as an object but can't figure out how to insert the entire document. Any suggestions would be much appr
-
Hello all... this is my first post in this discussion... i have a problem with my N80 ... i just updated its firmware today from v3 to v5 using Nokia Software Updater... evrythng run smooth (so far..) .... however the only problem ive encountered is
-
Not able to assign the chart of depreciation
Hi i am not able to assign the chart of depreciation, can any one provide me the detail path for the below issue. Inconsistency between FI company code BHEL and chart of deprec. BHEL Message no. AC481 Diagnosis You tried to assign chart of depreciati
-
Dbxml django mod_wsgi not working with error: 'finally' pops bad exception
Dear experts I have a python/django application, 'mysite', which connects to bdbxml. The application works fine using the django development server but fails when run using mod_wsgi with apache - my chosen route for production. Specifically it is the
-
Hi, I've checked how to use Kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. I know how to change between the keyboards and can also view keyboard. However, For eg,