Intermittent Wireless Only For Specific Apple Devices

Hello,
I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings. Subsequently, some (but not all) of my apple devices are having intermittent wirelesss connection problems. Specifically, my ipad1 & ipad2 never lose thier connection but a macbook pro (~ 2 years old), iphone 3g, iphone 4, older ipod touch & very old ibook g4 all work for a period of time (usually 1/2 day) & then lose thier connection. When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....". I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem. Finally, when the devices do lose thier network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices). I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option.

Sorry, I didn't mean to be sound rude, and if I did, I apologize.
Have you tried reinstalling the latest firmware? Would this new firmware default the 2.4 GHz radio to using either wide (40 KHz) or mixed 40 KHz / 20 KHz channels? If so, your Apple gear may not be able to connect or stay connected unless the channels are set to "narrow" 20 KHz ones.
I understand from what you read, but have you already scoured the Cisco/Linksys support site and forums to verify that previous firmware versions are still not available? I would be hard-pressed to believe that the vendor does not maintain earlier versions for cases just like this.

Similar Messages

Wrt120n Intermittent Wireless Connection For Specific Apple Devices

Hello,
I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings. Subsequently, some (but not all) of my apple devices are having intermittent wirelesss connection problems. Specifically, my ipad1 & ipad2 never lose thier connection but a macbook pro (~ 2 years old), iphone 3g, iphone 4, older ipod touch & very old ibook g4 all work for a period of time (usually 1/2 day) & then lose thier connection. When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....". I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem. Finally, when the devices do lose thier network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices). I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option. Any help is appreciated?

Let me know the name of the ISP? Let me know the ip address that you are getting from the router. To check the IP address that you are getting from the Router...
You can check the IP address in the following manner:
# Click on Start -> All Programs -> Accessories -> Command Prompt.
# A black pop up box should come up, type: "ipconfig /all" …
There check the IP address and Default Gateway under LAN….
# Open up the browser on the desktop and on the address bar type “Address of the Default Gateway” that will open up the Router setup page…
# On the same set up page reduce the MTU size to 1400 from Auto.
# Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 6, 9, and 11. Click Save Settings.
Secondly avoid using any other wireless devices like cordless phones, microwave oven etc nearer to the router. Then check the wireless connectivity.

Using macbook as a wireless router for non-apple devices

im trying to use my mac as wireless router for my xbox. i went into share under system preferences, and made a network with a WEP password. I can see the network on my xbox but it requires an IP adress...
i guess what im really asking is, if the mac can automatically assign IP adresses to devices on the network

I use my MBP regularly to share internet connection with PCs. Usually the PCs do a 'search' for a network and then 'connect' to the network name set in the Airport options... drop down panel. They get the IP automatically.
In the system preferences>share> there is a button on the right bottom which says 'airport options..' and in the drop down panel, you set the name or SSID and the WEP key.
Maybe you should check XBOX settings if the network settings are manual or automatic?
Hope that helps.

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

HT2500 Can I access my e-mail from any terminal or only from an Apple device?

Can I access my e-mail (I-Cloud) from any terminal with access to the web or only from an Apple device?

Can I access my e-mail (I-Cloud) from any terminal with access to the web
Just log into icloud.com from any web browser and click on the Mail icon.
Any way to access with "WINOWS XP Pro" OS (on the same PC)?
There is no way to set up iCloud on an XP system to use services such as PhotoStream directly from the system, no. Vista, Win 7 or Win 8 only. All support for XP from Microsoft including security patches will be ceasing in the not too distant future, so it's probably time to consider upgrading.
Regards.
Message was edited by: varjak paw; corrected typo.

IOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

iOS 7 has remove the unlock sound for the apple devices? Is it possible to set it back?

ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more.

Cellular data only for specific apps

Is there a way by which i can enable cellular data only for specific apps? Lets suppose i want only mail and viber to run on cellular. So how do i enable cellular network only for viber and mail

Hello all,
I have been using the iPhone 4S for about a year and I never had problems untill a few days back. Since about a week, my 3G settings for applications installed automatically reset.
Path >> iPhone screen >> Settings >> Mobile(Cellular) >> Use Mobile Data For >> "List of all apps installed"
Against each application, you have an option to either enable / disable the mobile data usage:
Eg:
App Store          (swipe left to disable || swipe right to enable)
Contacts          (swipe left to disable || swipe right to enable)
Facebook          (swipe left to disable || swipe right to enable)
Facetime          (swipe left to disable || swipe right to enable)
Weather          (swipe left to disable || swipe right to enable)
You Tube          (swipe left to disable || swipe right to enable)
etc...
Problem:
If I don't want You Tube to use mobile data, I would normally swipe left to disable thus the application will not start / stream any music if its on 3G/4G. Since a few days, whenever I disable the option for any app... go back to the main screen and recheck the settings, I see its enabled again!
The error I see when I start the app is:
MOBILE DATA IS TURNED OFF FOR "YOU TUBE"
You can turn on mobile data for this app in settings
<Settings>     <OK>
When I go back to settings... I see the option is enabled.
Now I dont know what and how this happened all of a sudden. I have tried resetting the network settings for my iPhone, and it has not helped me.
My iPhone is updated to OS 7.0.4 and all apps are updated.
Anyone can help me on this error and how do I fix this?
FYI... I have no problems connecting to WiFi at all!

Using manual IP address only for specific networks

For my home network I use DHCP with manual address because I have to forward some ports specifically to my computer. However this causes problems when connecting to other networks. For some reason this setting stays active even when using other networks. Therefore, I can't connect to say my school network because the setting has to be set to plain DHCP. Is there a way to use manual IP address only for specific networks?

System Preferences > Network > Locations and add a location for your home with its manual settings. Add a location for other DHCP locations. Then when you want to connect at another DHCP location select that location from your locations dropdown.

Will my Apple ID work for any apple device

does my Apple ID work for any apple device can i sign in on any apple device

Absolutely. Assuming that you are talking about your own devices. You can sign in on another person's devices, but it's not advisable to do so.

Showing Sub-Totals only for Specific Column in PowerView

Hi,
Is there a way of showing the sub-totals only for specific columns in a PowerView Matrix?
I am only aware of showing the sub-totals for all or non of the columns.
Thanks and Regards,
Justin

Hi Justin,
According to your description, you want to get sub-totals specific columns within columns group. Right?
In this scenario, we can use IIF() function in expression to achieve your goal. The expression will only return the total value when the column value is a specific value, otherwise we can make it return nothing. Try the following expression:
IIF(Fields!Column.Value="[specific value]",Sum(Fields!Total.Value),nothing)
We have tested this scenario in our local environment. Here are screenshots for your reference:
Reference:
Expression Examples (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SCCM 2012- How to limit a collection membership only for specific count of machines

How to limit a collection membership only for specific count of machines

As I said you can use where SMS ID like %1 and see how many machines that gets you. If it's not enough do where SMS ID like %1 or SMS ID like %2. Keep adding a digit until you get ~5000. It won't be perfect though.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Wireless keyboards and non apple devices

Is there any way to pair an apple wireless keyboard to another bluetooth device.
The device i am using recognizes the keyboard, but when it asks for a passcode i am stumped. I tried using the passcode generated by the mac i have, but it is clear after a couple tries that it is randomy generated each time a pairing is recognized.
Any thoughtts or solutions much appreciated.

Hello
Here you are in a forum dedicated to the application 3umbers".
May you ask your question in an hardware dedicated forum ?
Yvan KOENIG (from FRANCE jeudi 24 janvier 2008 19:27:57)

Only allow specific USB device GPO - Existing drivers question

My employer is introducing a policy that only a specific model of USB drive will be allowed on our IT infrastructure in the future, and I need to restrict the estate so they cannot use any others.
I have successfully tested & configured the following settings:
Allow installation of devices that match these device IDs
Prevent installation of devices not described by other policy settings
Which works to allow the approved device and block any other new ones. The problem is that any USB storage device that was installed prior to the GPO going live can still be used, unless it is explicitly uninstalled. I have confirmed this in testing across
multiple devices/reboots.
Is there any way to force all USB storage drivers to uninstall/other way around this? We have a large estate over a wide area, so it not feasible to uninstall all old drivers manually. Thanks!

Just a note for anyone else in a similar situation. I haven't found a way to do what I require using Group Policy:
-Two policies exist that can block all USB storage devices from running or installing, including previously installed devices
OR:
-Can block all USB devices except approved device, but have to specifically allow all other desired classes, and has no affect at all on any USB device, including storage, already installed on the computer.
As a result we are now looking at third party tools to control device access.

WRT610N - intermittent wireless access for all wireless clients; standard fixes don't work

My network had been working fine for over a year, and now I'm getting intermittent wireless access. Everything will be ok for a day or two, and then all of a sudden nothing wireless will work (the wired computer will still work): 1 Vista desktop, 1 vista laptop, 1 XP laptop, wireless printer, and iPod touches.
Vista computers will either say "the network has denied the association request" or the "network key is incorrect" (it isn't). On XP computers, I can get to the point where the computer is trying to acquire an IP address, but it just times out.
So far:
- Made sure signal strength is good (most have full bars)
- Upgraded firmware (worked for 2 days)
- Made sure all drivers were up to date
- Changed the broadcast channel (most recent fix, everything worked for 2 days)
I've never had default configurations; my SSID was enabled and set up from the beginning. I recently moved from WEP to WPA because a new Vista laptop refused to work with WEP. The clients do not pick up any other network signals from neighbors.
A router reboot sometimes works, sometimes doesn't. Like everything else I've done, if it works, if it's for a day or so.
Everything worked for a year until about 2 weeks ago (a week after I switched from WEP to WPA - coincidence?).

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you have not done this since your last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
To reset the router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Adjust it's Wireless Settings -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
2.4GHz Wireless Settings -
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
XP :
Click on Start and goto the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.
Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...
It will connect...
Vista :
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...
Message Edited by forsaken on 07-26-2009 04:03 PM

[CC] How to perform a script "foo_beforeSave.htm" only for specific site?

Since a long time I use a script for automatic text replacements which perform with each save command.
The script sits in that folder:
C:\Users\myusername\AppData\Roaming\Adobe\Dreamweaver CC\de_DE\Configuration\Commands\foo_beforeSave.htm
It works for all documents of all sites.
The source code (the regex rule is just an example) of the script you find below.
My question:
I like to perform a script like this only for a specific site.
I'm not a programmer. So I don't know where to place the script to reach that target. Or how I have to edit the source code of the script.
Is there anybody who could help me with that please?
I would appreciate it a lot. Thanks
<!DOCTYPE HTML SYSTEM "-//Macromedia//DWExtension layout-engine 5.0//dialog">

<html>
<head>
<title></title>
<script src="../Shared/Common/Scripts/dwscripts.js"></script>
<script>
function canAcceptCommand(){
    return true;
function getFileName(url) {
var index = url.lastIndexOf('/');
if (index != -1) retVal = url.substring(index + 1);
else retVal = url;
return retVal;
function runCmd(){
    var dom = dw.getDocumentDOM();
    dom.synchronizeDocument();
    var path = dw.getDocumentPath('document');
    if(getFileName(path) != 'foo_beforeSave.htm'){
        var docEl = dom.documentElement;
        var tempDoc = docEl.outerHTML;
        tempDoc = tempDoc.replace(/&bdquo;/g,'„');
        tempDoc = tempDoc.replace(/„/g,'„');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/”/g,'”');
        tempDoc = tempDoc.replace(/”/g,'”');
        docEl.outerHTML = tempDoc;
</script>
</head>
<body onLoad="runCmd();">
</body>
</html>

Well, the posted script is a full working one.
I just search for a way to limit the range of the script to the actual site.
Therefore it is unimportant, which regex is in the example.

Intermittent Wireless Only For Specific Apple Devices

Similar Messages

Maybe you are looking for