Internal Agent not working.
Hi,
I recently upgraded ODI from version 10.1.3.5.1 to version 10.1.3.5.6,we do development in house and mostly use the "Internal agent(no agent)" to execute our packages and interfaces.I was always able to restart a failed session using the "Local Agent(internal Agent)" before the upgrade,now after the upgrade I am not able to restart a failed session using the "Local Agent(internal Agent)" and I can only restart any failed session using a "user created agent".Did I miss any step while upgrading ODI.
Any help on this front is appreciated.
Regards,
John
Edited by: user12083061 on Apr 15, 2010 9:46 AM
Edited by: user12083061 on Apr 15, 2010 9:46 AM
Hi Reshma,
Thanks you for your reply.I am using "LKM File to SQLLDR" to bulk load millions of rows from flat files and I execute the process using the local(no agent) option,some of these rows in the flat files have special characters which chokes sqlldr and the step bombs out.When I continue the loading of data after I select the "Ignore Error" switch and restart the failed process using the local (no agent),the process does not restart,it sits on the same failed state,but If I restart the failed process using an agent that I had defined,it restarts.
I dont understand this behavior and this is happening only after I upgraded from ODI 10.1.3.5.1 to 10.1.3.5.6
Regards,
John
Similar Messages
-
Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
Internal speakers not working after upgrading to Maverics
internal speakers not working after upgrading to Maverics
There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store. -
Internal Microphone not working for L505D-S5983 (PLEASE HELP!)
Hi,
I can't seem to get my internal microphone to work. I have enabled it under Sound->Manage Audio Devices
->Recording tab. However the green vertical bar does not detect any voice. After setting the Microphone boost to +40dB, it detected some noise (since it has some green light) but I realized it wasn't detecting my voice. Since this did not work, I re-set the Microphone boost to only +10dB. I only have one internal microphone and no external microphone.
I have seen many postings on internal microphones not working on Toshiba laptops but couldn't find a solution to mine. Can someone please help? I think it's about time that Toshiba fix this issue after the countless complaints.
FM.No mentions of reinstalling the sound driver. That sometimes turns on the microphone.
Satellite L505D-S5983
Realtek Audio Driver for Windows 7 (32/64)
Satellite L505-S5988
Realtek Audio Driver for Windows 7 (32/64)
Satellite M500-ST6421
Realtek Audio Driver for Windows Vista (32bit/64bit)
-Jerry -
When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only
If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao. -
Imac intel internal speakers not working windows8
Imac intel internal speakers not working with windows 8 external and head phones work just fine
Macs don't support Windows 8 at this moment. Wait until Apple launches drivers for that new Windows edition
-
Internal mic not working after updating to 10.10.1
After updating to 10.10.1 (from 10.10) on my MacBook pro 2010 (15” screen) the internal mic is not working when using FaceTime (or Skype) and so the person on the other end of the video/audio call is unable to hear me. On my end there is a static/crackly sound during FaceTime (or Skype) connecting since the update which I believe is related to the mic problem (no sound input on Mac during FaceTime/Skype).
HELP!!!I had exactly this same issue and and this workaround from Paul on another thread (Internal Mic not working for phone calls in Yosemite ) solved it :
Make sure FaceTime App is not running
Open Terminal
type sudo killall coreaudiod
Press Return
Enter your computer's admin PW -
System internal MIC not working in Hp Pavillion dv1000(model: dv1662ea)
Hi, When i connect to internet, internal MIC not working when i go to the voice chatting . Please provide me a solution. My model # is HP Pavilion DV1000 Notebook PC Model: dv1662ea, O/S: WinXP SP2
Thx. .
Vami experiencing the same problem.. how did you resolved it?
-
I had just get a new X220 in recent days.
And I found the internal mic not working, I can not record any sound through Sound Record or Skype.
I had tried all the following methods, but the mic still can not working. Anyone cound give me some suggestion ?
1) update sound card driver to 8.32.23.2
2) Fn+F6, change between "only my voice" or "Multiple voice"
4) UnInstall source card driver and use microsoft generic driver
3) The method in http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-internal-mic-problem/td-p/435551/page/..., operate like :
Start -> control Panel -> Sound
Click on the "Recording" tab
Click Internal Microphone to highlight it
Click Properties
Click the "Advanced" tab
Uncheck "Enable audio enhancements"
Finally, click the "Levels" tab and turn Microphone Boost to 0dB. (if you don't do this the noise will be even louder than before).
Click apply.hey kitewind,
welcome to the forums and since you have tested the microphone using microsoft generic drivers and i'm guessing it did not work; therefore the best action for you right now is to contact our tech support group via
http://bit.ly/LNVsuppNum
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Internal microphone not working on face time
internal microphone not working on face time
Test the microphone in the Sound preference pane. Does it work there?
-
EFS Recovery Agent not working on Windows 8.1
I know EFS data recovery has been discussed so many times in the forums but I could not find anything useful in the other threads as I believe I have followed all the required steps but still cannot get EFS recovery agent to work.
I have a Client1 (Win 8.1) and a DC1 (Windows Server 2012 R2) under beta.com domain.
DC1 is a CA server as well as a domain controller.
I logged into DC1 as beta.com\Administrator
which is the Domain Administrator account.
I duplicated the EFS Recovery Agent template on the
DC1 and published it into Active Directory.
Then I edited the Default Domain Policy GPO and under
Computer Settings\Policies\Windows Settings\Security Settings\Public Key Policies
I right clicked Encrypting File System and selected Create a Data Recovery Agent
and a new file recovery certificate was generated for the Administrator account.
I exported the newly-created Recovery Agent certificate and then logged into
Client1 as beta.com\Administrator and imported
it.
I then logged off from Client1 and logged back in using a different account beta.com\johns
and encrypted a folder (with a text file inside) using EFS. (The folder address on local disk is
C:\Reports)
Then I logged back into Client1 again using beta.com\Administrator
but I am unable to open the file inside the folder and I get an
Access is denied message.
It is very strange to get an "Access is denied" message because on the text file when I right click and click Properties -> Advanced -> Details, under the Recovery Certificates, the Administrator account's certificate is listed
and its thumbprint corresponds to the same recovery certificate which I created in step 3. But I am still unable to access the file.
Do you have any idea why? Am I missing something?
Thanks in advance.
MCT, MCSA/MCSE Security
http://esitech.spaces.live.com/Hi
The Client1 user needs to enrol via GPO to get the recovery certificate normally via automatic enrolment
Check the Personal Certificate store for Client1
I think the policy needs to be applied before you encrypt any data
To manually recover
Did you export the Private key when you did the export ?
Did you export to a .cer file -
One other thing - I had a problem with the key pairing so I rebuilt the rsa 1024 and the unit started working. Unfortunately I reloaded without the config in place and now I cannot get it to work again. Any help will be greatly apprecaited although I did review a dozen other posts of people having similar problems and for some reason there is never any conclusion as to the solution and I am not sure why.
Some other info from the client end:
I just ran the stats on the client and packets are being encrypted BUT none are decrypted.
Also Tunnel received 0 and sent 115119
Encryption is 168-bit 3-DES
Authentication is HMAC-SHA1
also even though the allow LAN is selected in the Cisco VPN client it states the local LAN is disabled in the client stats
also Transparent tunneling is selcted but in the stats it states it is inactive
I am connecting with the Cisco VPN Client Ver 5.0.07.0440
This config works. It is on the internal net 192.168..40.x and all users obtain dhcp and surf the web. It has required ports opened.The problem is that you can connect remotely via the VPN and you receive an IP address from the remote-vpn pool but you cannot see any machines on the internal network. The pix is at 40.2 and you cannot ping the pix and the pix from the remote PC connecting via the VPN and youcannot ping the remote PC from the PIX console when the remote is connected and receives the first IP address in the VPN pool of 192.168.40.25
I need to see the internal network and map network drives. I have another friend that is running the same config and it works but his computer is on a linksys wireless and has an IP of 192.168.1.x and the IP he receives from the VPN pool is 192.168.1.25 so I do not know if the same network is allowing this config to work even if there is an error in the config. In my present case I obtain the ip of 192.168.40.25 from the VPN pool and my connecting pc on 192.168.1.x I really am not sure how the VPN virtual adapter works. I am assuming it routes all traffic from your connecting PC to and from the virtual adapater but I really do not know for sure.
Other people have had similar issues with accessing the internal network from the VPN. One solution was the split-tunnel, another was the natting and another had to do with the encrption where there and an issue with the encrypt and ecrypt which was stopping the communicaton via the VPN.
I still cannot seem to find the issue with this config and any help will be greatly appreciated.
This is the config
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password somepassword
hostname hostname
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group network internal_trusted_net
network-object 192.168.40.0 255.255.255.0
object-group icmp-type icmp_outside
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
icmp-object source-quench
access-list OutToIn permit icmp any xxx.xxx.xxx.0 255.255.255.248 object-group icmp_outside
access-list no_nat_inside permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list split_tunnel permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list OutToIn permit ip any any
access-list outbound permit ip any any
(NOTE: I had many more entries in the access list but removed them. Even with the above two allowing everything it does not work)
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.168.40.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_client_pool 192.168.40.25-192.168.40.30
pdm history enable
arp timeout 14400
global (outside) 1 interface
I had this statement missing from the previous posted config but even with the nat (inside) 0 access-list no_nat_inside it still does not work.
nat (inside) 0 access-list no_nat_inside
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group acl_outside_in in interface outside
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.40.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community $XXXXXX$
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set 3des_strong esp-3des esp-sha-hmac
crypto dynamic-map clientmap 50 set transform-set 3des_strong
crypto map vpn 50 ipsec-isakmp dynamic clientmap
crypto map vpn client configuration address initiate
crypto map vpn client configuration address respond
crypto map vpn client authentication LOCAL
crypto map vpn interface outside
isakmp enable outside
isakmp identity address
isakmp client configuration address-pool local vpn_client_pool outside
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup remote-vpn split-tunnel split_tunnel
vpngroup remote-vpn idle-time 10800
vpngroup remote-vpn password ANOTHER PASSWORD
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.40.0 255.255.255.0 inside
ssh timeout 30
console timeout 60
dhcpd address 192.168.40.100-192.168.40.131 inside
dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
username AUSER password PASSWORD privilege 15
terminal width 80
****************** End of config
I have been searching docs and other people's postings trying to obtain the info to make this work. It appears pretty much boiler plate but I believe my problem is in the natting. I am using a range in the internal network for the VPN pool and I have tried switching this to other networks but this has not helped. Unfortunately I have been unable to get the PDM to work and I believe this is a PC config thing and I did not want to waste the time on it. I read a post where a person using the PDM interface with the same problem (not being able to access the internal network) was able to go to a section in the VPN wizard and set the Address Exeption Translation. They said they originally set the VPN subnet when they did not have to. Many of the other blogs I read also stated that if the natting is not proper for the VPN pool- that it will not work but I am confused by the examples. They show as I do the complete range for an access-list called no_nat_inside but I believe it should only have the VPN pool IP range and not the entire network since the others do require natting - not sure if my thought process is correct here. Any help will be greatly apprecaited. Also this morning I just tried a boiler plate example from CISCO and it also did not do what I need for it to do. And I also connect a PC to obtain an IP to see if I can see it - no good. The PC can ping the PIX and viceversa but no one can ping the remote PC that connects via the CISCO Remote VPN client even though it receive an address from the vpnpool. Also include LAN is checked off on the client. This was mentioned in anther post.
Thank you once again.Hi,
PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
Here is a PDF of the original ASA5500 Series.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
Here is a PDF of the new ASA5500-X Series
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
Could you provide the requested outputs?
From the PIX after connection test
show crypto ipsec sa
Screen captures of the VPN Client routing and statistics sections.
- Jouni -
Macbook pro 10.6.8 internal mic not working
Hi there,
After I got back my mac book pro from repair. I realised my internal mic is not working? Any idea? Or can I fix this myself?
I tried quicktime to record my voice. I dun hear my voice after I played it.
Thanks.Hi,
Did you solved this problem?
I have the same situation here...
Regards -
Internal microphone not working with Windows 7 Enterprise on dx6650
Hi. I recently upgraded my HP Pavilion dx6650 to Windows 7 Enterprise (final version, non beta). Everything worked fine but the internal microphone that is not working.Thank you in advance.
Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
Headphone Jack Glowing Red, Internal Speakers Not Working...
Hey, I have a 2.0GHz White MacBook (almost a week old), and I just recently came across this problem (this morning, actually). I usually have my MacBook connected to some external speakers through the headphone jack, the internal speakers are pretty terrible. Anyway, last night I left the computer on playing music as I fell asleep, this morning I woke up and the computer must have some how come unplugged from the AC power, as it was dead. I plugged it back in and everything was fine (I mean, it had to charge up, and the battery 'health' in iStat Pro was down to 93%, also not sure what this means... But everything else was fine). Then, I unplugged my external speakers and the jack was glowing red, I believe there's an LED inside. The internal speakers would then not work.
I did a quick Google search and discovered that this problem had been experienced on MacBook Pros. Someone recommended plugging in a set of headphones, I did so and then unplugged them and the internal speakers worked for a moment. I plugged in the external speakers again, and they worked (and work) fine. The problem is with the internals, they don't work, and plugging in my headphones again has not solved the problem, and the light is still on when the jack is not occupied.
Any ideas?
[edit] As of this writing, they are currently working, after plugging in the headphones again and unplugging them, however, the light still blinks when I do this, and there is a bit of a hesitation between the headphone being unplugged and the internal speakers kicking in... (longer than normal, I know there was always a slight delay, but this is a few seconds of blinking light and no sound).you can fix this by "cleaning" the audio jack. the computer thinks that a digital output is connected. if you go to sound under system preferences, and it says digital output rather than internal speakers, then this is the problem.
I used a tightly rolled up piece of toilet paper to clean the jack. I twisted it up, stuck it in the jack, and then moved it around for a while. the red light went off and my internal speakers started working. someone else used a toothpick.
also, before i fixed this, i couldn't turn the volume up or down (unless i was using headphones) and the volume level screen that shows up on the screen had a circle with a line thru it...like the no smoking signs, but small and just under the volume bars.
http://discussions.apple.com/thread.jspa?messageID=3700681�
good luck
Maybe you are looking for
-
Sub folders content are not getting displayed using KM Navigation iView.
Subfolder contents are not being displayed for KM Nvaigation ivew Posted: Feb 15, 2006 1:01 PM Reply E-mail this post Hi I created CM repository and did all settings.i could able to see the folder and subfolder contents under Content adm
-
MacBook Air 11-inch, Mid 2013 won't boot with external USB keyboard
Hello, Just bought a MacBook Air 11-inch, Mid 2013 (8GB, i7, 512GB SSD) today. All available software updates are installed (OS X 10.8.4 (12E3067)). Also have a Macbook Pro Retina. If I connect a external USB keyboard (Kinesis Advantage Pro USB) to t
-
Animated GIF in twitter app on Z30 not displayed
When using the Blackberry twitter app and click on a tweet with an animated gif all I get is a blank screen. This used to work but just recently stopped. Any suggestions?
-
SQL select a concatination of entries from another table
I am trying to select a few columns from one table and then add another column that is a concatination or names from another table that referances it as below. Is this possible to do in one select statement? table x1 ID NAME 1 Bob 1 Tom 2 Bill table
-
Display '0s' for null database items Please help!
Hi all, I need your help on a possible minor problem I'm encountering. I have 5 fields (all numeric data types) on my form of which, the last field is a sum (formula non-database item) of the top four items. 2 out of the remaining 4 fields are databa