Internal and external speakers

so i bought some a set of 2 logitch speakers and a sub... the only spot to really plug it into is the headphone jack... i was wondering if it was possible to set up my sound to come out of the head phone jack and the built in internal speakers
iMac G5   Mac OS X (10.4.5)  

Welcome to Apple Discussions!
No. You can have either external or internal, but not both. The iMac G5 has built-in SPDIF port which supports 5.1 speaker systems such as the Logitech Z-680 if you want more than stereo sound. Here is the cable you'd hook up your iMac too those speakers to do that:
http://www.monstercables.com/productPage.asp?pin=2809
Not all applications support more than 2 channel sound, but those that do will be able to take advantage of it.
P.S. I might add, this is the iMac Intel Duo forum, not the iMac G5 forum. If you have an iMac G5 as your profile says, you may find people will be able to give you more accurate answers about your machine, by posting here:
http://discussions.apple.com/category.jspa?categoryID=134
If you have an iMac Intel Duo, you are in the right place. To tell the two machines apart, see this article:
http://docs.info.apple.com/article.html?artnum=301724

Similar Messages

  • I have lost all audio on both my internal and external speakers.

    I have lost audio on both my internal and external speakers.  I have checked the System Preferences when my external speakers are plugged in it is acknowledged.  When using internal speakers they are also acknowledged.  Sound volume on Preferences is on and fully high.  The sound buttons on the keyboard  do not work and the sound level is now locked in at full sound and cannot be adjusted using the keys.  The System Preferences shows that Mute is now checked and I cannot uncheck it.  What should I do to get my sound back both internally and externally?

    Repair permissions & restart.
    Check your settings in the Audio Midi app which is located in the Utilities folder.
    http://support.apple.com/kb/TS1574 Troubleshooting issues with no audio from built-in speakers on Macs
    Trick/Tip: Open up GarageBand if installed then, open a program (optional).
    Quit out of the GarageBand app.
    =====================
    Repairing the mysteriously muted Mac
    The background on the issue is that there’s a small sensor switch inside the headphone port. When you insert a headphone jack, the sensor understands what's what and changes the sound output setting to Headphones. If you insert a jack for digital audio output, the device changes to Digital Out. When you remove the jack completely, it should read Internal Speakers.
    The spirits tell me that there’s a very good chance that you recently had something jacked into this port—a set of headphones or a cable leading to powered speakers, for example. When you removed the jack, something in the port prevented the sensor from tripping correctly. That’s why you see Digital Out instead of internal Speakers.
    The solution is to force the sensor to do its job. The safest way to do that is to simply run a jack in and out of the port a few times. Much of the time, this takes care of the problem by correctly tripping the sensor. If that doesn’t work, there may be gunk in the port. Before turning to more invasive techniques, get a can of compressed air, attach the small tube that fits the nozzle, and blast a few shots of air into the port. With any luck, that should dislodge the gunk and the port will operate as it should.
    If that doesn’t work, find a foam-tipped swab that fits (electronics shops generally carry them), dip it in rubbing alcohol, and gently insert it into the headphone port in an attempt to wipe away any stubborn gunk. I recommend foam rather than cotton swabs because the cotton variety might leave threads behind. (This same technique works well with misbehaving headphone ports on devices such as iOS devices.)
    It's possible that gunk has nothing to do with it. Rather, it may be that the switch just needs a subtle nudge. If a jack or swab doesn't work, I've heard of people successfully resetting it with a deft poke of a toothpick.
    http://www.macworld.com/article/2031146/repairing-the-mysteriously-muted-mac.htm l

  • I can't hear iTunes music or internet radio but internal and external speakers are definitely working. Is there a key stroke I have set or some other, maybe Yosemite, issue?

    I have checked my internal speakers on an iMac and also the external speakers - all working. When play music in iTunes the sound bar moves but no sound is heard.  Same problem if I want to listen to the radio via internet.  Has anyone a suggestion.  Is it a Yosemite issue - I have had others involving printers. thanks

    like davis says then even though I have connected headset and external speakers to my imac then at boot up the boot sound comes out of the imac speaker
    but once booted into OS X all audio is played out of the headset and ext speakers and the imac speakers are silent as the grave

  • How to get internal and external speakers playing together?

    Hey everyone, I just bought the HP ENVY dv7 with beats audio and I love it!  I only have one question that I couldn't seem to get answered anywhere else so I turned to here. Is there a way I can have the compuer's internal speakers (beats audio) and my home stereo speakers (external) playing at the same time? I love how good the beats sound but I also want the surround sound given by the external speakers. So is there a setting I can switch it to so it'll play both? I've tried looking but couldn't find it. Or is there some program/driver like thing I need to download off the interwebs so it'll play both? Thanks in advanced. 

    Hello Branman,
    I understand you want to play your surround sound system while also being able to hear your internal laptop speakers, is that correct? I will be happy to help you.
    Unfortunately that will not work, by design whenever you plug in a surround sound system or just a standard set of headphones the system automatically disables the internal speakers. I was not able to come across any legit online software that you can download to make that a possible transition.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • MacBook Pro internal and external speakers not responding

    For the last 3-4 weeks, I've had odd bouts of incidents where the speakers (internal) stop responding at all.  I have a set of external speakers that are normally plugged into the computer, but they have also stopped producing sound.  Is there any way to troubleshoot this to determine the source of the problem.  (PS:  NOTHING works.  Even Skype contacts, iTunes playback, notification sounds -- everything is out.)

    Bad really, coz if you could see a red light it would be much easier to solve.  The red light would indicate it was operating as a toslink (digital audio) connector and the switch that changes it from analog to digital audio was stuck.  It can be unstuck by wiggling a toothpick or cocktail stick in the socket.  It means it's much harder to diagnose what your problem is.
    Suggest as a first stage that you attempt a PRAM reset followed by a SMC reset if still not working, then report back here.

  • Can u have internal AND external speakers on???

    Can both the internal speakers and some of my external speakers be on at the same time??

    Allan,
    No, unfortunately you cannot. Having external speakers plugged into the optical/analog output port automatically mutes the internal speakers.
    Joe

  • Enabling internal when external speakers plugged in

    is there a way to enable the internal speakers when i have external speakers plugged in on my 24" iMac??
    i want this cause i use a Bose Cinemate® speaker system and it powers off after inactivity/no sound ... so then I don't hear alarms etc ...
    btw i've asked Bose and they say there's no way to disable their power off timeout ;-()
    TIA
    Barry

    Hello mate
    I have a similar headache wanting to connect bluetooth speakers as well as plugged in speakers to play itunes in 2 rooms at the same time...nigh on impossible and is still a nightmare- however a solution that may work for you is this..http://www.versiontracker.com/dyn/moreinfo/macosx/18611 - its a piece of audio software called audio highjacker that allows you to play external and internal speakers at the same time. It wont work for me due to the latency or delay to my bluetooth - it plays the same tune a second or out of sync - so in one room they are just into the chorus while the other room they are still on the verse!!
    Anyway download Audio highjacker and go to itunes (or whatever audio you want to highjack) open audio jack and click the application in its menu window. make sure source type is 'application' and mute is off - then click highjack - then 'click here to insert effect' choose 4fx and then auxillary device output - this will bring up a menu where you can choose what you want playing thru the other speakers or internal - this is from memory so apologies if its a little inaccurate - but this will play internal and external speaker at the same time - although not perfectly sychronised
    hope this helps
    cheers
    Mike

  • DNS Forwarding Same Internal and External Zone

    Hi,<o:p></o:p>
    So we have decided that we want our internal domain to be the same as our external domain e.g. domain.uk. I understand that split DNS can be used
    to fulfil this requirement but is it possible to set up a forward so if the DNS entry is not available in the internal zone it will forward onto one of our external name servers where it can resolve?<o:p></o:p>
    We are basically trying to avoid having to add the entry on both external and internal DNS servers for it to resolve. So far I have added the external name servers to
    the forwarders and disabled root hints which didn’t work. I’ve tried to add a conditional forwarder but it says the zone already exists. It seems the only to achieve the internal resolution is by creating the DNS entry both internally and externally.<o:p></o:p>
    Does anyone know if this is the case? It seems strange that you couldn’t point the DNS to another external name server for resolution? <o:p></o:p>
    Any help would be appreciated.<o:p></o:p>

    You must ask in networking forum
    https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS&filter=alltypes&sort=lastpostdesc

  • Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

    We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
    The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
    the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
    all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
    So it seems that the issue only arises when we are sending to both internal and external addresses.
    I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
    longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
    So, I have two concerns:
    First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
    Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
    For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

    Hi Neil,
    According to the description, I find a related KB on Exchange 2010:
    https://support.microsoft.com/kb/2694474?wa=wsignin1.0
    It has the similar situation as yours.
    This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
    Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
    Also please check whether Throttling has been set.
    Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
    More details to see:
    Message throttling 
    http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Can I split my itunes music library between and internal and external hard drive?

    Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod?  Here's my situation:  I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users.  I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

    If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive.  Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads.  You would need to manuay manage moving things from there if tht is not where you want them stored.
    Perhaps a "better" solution would be for you to invest a little mone into 2 external drives.  One to hold your entire iTunes library, and the second to be your off-line backup of the first.  This is the method I have gone with and I like how it works for me.  My entire iTunes library is on an external (portable) 320GB drive.  Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content.  For me, I purchase little content during a week, but I do move a fairly large volume of podcasts.  With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically.  This won't work for apps or purchased content, but for subscribed podcasts, it is great.

  • SharePoint 2013 - Office Web Apps - Internal and External Use

    I have successfully installed SharePoint 2013 and Office Web Apps on Azure VMs inside an Azure Virtual Network (IaaS model). Everyting is working well. However, my testing has shown that external users and internal users can't use Office Web Apps at the
    same time.
    Office Web Apps, installed on its own vm, accomodates an external and internal URL quite well. However, SharePoint 2013 appears to only allow one setting for WOPI Zone, either internal or external but not both. I've set the WOPI zone to Internal-HTTPS (Set-SPWOPIZone
    –Zone “internal-https”). OWA works just fine if accessed from inside the Azure Virtual Network. However, if I try to access from outside the Virtual Network, from the Internet, Office Web Apps fails. The exact oppisite is also true. I can set WOPI Zone to
    External-HTTPS and accessing from the Internet works fine, but accessing inside the Virtual Network fails.
    Am I missing something? I, obviously, want Office Webs Apps to function properly for both internal and external users simultaneously.
    I appreciate any help anyone can provide here.
    Glenn

    Hi Glenn,
    To have both the use of Internet and Internal available to your end-users, you first need to configure AAM setting. Open Central Administration > Application Management > Configure alternate access mappings. Let's say there is an existing web application
    named http://sharepoint and my end-users from local network are able to access it using the URL http://sharepoint (root site collection). Here you need to add the Internet URL by select the web application and click Edit Public URLs. Add the Internet domain
    to the web application, e.g http://sharepoint.abc.com. You don't necessarily have to edit binding setting in IIS. Before continuing next steps, make sure you are able to access http://sharepoint.abc.com from the Internet while being able to access http://sharepoint
    from local network (aka Internal).
    On the machine where Office Web App (OWA) Server 2013 is installed, open PowerShell to add OWA module and use the following command to re-create a new OWA server farm if you've completed configuring it previously.
    New-OfficeWebAppsFarm -InternalUrl "http://owa" -ExternalUrl "http://owa.abc.com" -EditingEnabled.
    In this case, I'm not using SSL certificate to encrypt data over the Internet. You can use Internet-public IP of the OWA server like -ExternalUrl "http://198.xxx.xxx.xx". Add CertifcateName parameter if you want to use whether CA-issued certificate
    or self-signed certificate.
    On your SharePoint machine, you need to re-bind all WFE machines to WAC farm using the cmdlet New-SPWOPIBinding. Next, you need to set the WOPI zone for both internal and external.
    Set-SPWOPIZone -zone "external-http"
    Note: I'm not all using certificate in my guidance. But the steps to have it configured is just to add more parameter. 
    I've recently successfully deployed OWA multi-server farm for both internal and internet uses for two big clients. In real-world scenario, ideally OWA should be published through firewall (Forefront UAG, TMG, F5...etc). Please let me know if you still have
    issues after following my steps. My email: [email protected]
    Regards,
    -T.s
    Thuan Soldier
    A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
    SharePoint Vietnam |
    Blog | Twitter

  • Front End internal and external web services

    Hi all,
    Can someone explain the purpose of internal and external web services URL in front end server. what does it do and what is it used for? and why the external traffic goes directly to it and not through reverse proxy?
    Thanks,

    They're for multiple purposes.  Address books, autodiscovery, meeting urls, mobile clients, etc.  There are two because they respond slightly differently based on whether the client is internal or external.  External traffic should always reach
    it through a reverse proxy, that reverse proxy should proxy traffic received on port 443 to port 4443 on your front end pool.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

    Dear Experts,
    I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.  
    The registered domain name is e.g.  contoso.com. 
    a. What should I use as domain name on AD? contoso.com or contoso.local
    b. Is it recommended to have two different servers  for AD and Exchange?
    c. What should be my connector settings for mail flow?
    d. how can I set 2 email servers in company for load balancing?

    Hi,
    a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
    b, Recommended that installing AD
    and Exchange Server on two separate
    Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
    c, Found some articles for your reference:
    Configure Mail Flow and Client Access
    http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
    Configuring Outbound Mail Flow in Exchange Server 2013
    http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
    d, Load Balancing
    http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Leopard.  Did a full restore from Time Machine.  Now I can't access my other internal and external drives.  I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

    Leopard.  Did a full restore from Time Machine.  Now I can't access my other internal and external drives.  I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents.  I have repaired permissions pn the main harddrive.  When I try too click on a disk I get the previously stated error.  I can't even open up information to see what permission/access there is.  It simply will not let me see the content.  It shows the content of my main hard drive when I have clicked the other harddrive's name.

    Solved:
    sudo chflags 0 /Volumes/"FCP Time Machine BU"
    sudo chown 0:80 /Volumes/"FCP Time Machine BU"
    sudo chmod 775 /Volumes/"FCP Time Machine BU"
    sudo chmod -N /Volumes/"FCP Time Machine BU"

  • Cisco ISE with both internal and External RADIUS Server

    Hi
    I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
    I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
    So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
    I will like to know if it is possible to configure it and how I can do it ?
    Thanks in advance for your help
    Regards
    Blaise

    Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
    Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
    The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

Maybe you are looking for