Internal Audio and M Audio Firewire Audiophile Not working.

Hi, as USB sound cards do not seem to work with premioere Pro CS^ (I tried ASIO4ALL) I thought I would try my computers internal one. It is a Realtek internal card. Triad lots of settings in Audio Hardware and Mappingsa but still no joy.
I then borrowed a M Audio Firewire Audiophile break out box, installed the drivers and tested it in Windows, works fine. Went into Premoiere pro and now It has a M Audio Firewire ASIO but still no luck. Even tried ASIO4ALL.
I have even tried Premiere Pro WDM sound;(.
I know Premiere is a video editing package but its suport for sound seems a but lacking to say the same. Before I raise a suport call with Adobe anyone got anty ideas?
Ben
PS All these devices have been tested by playing a video with VLC and work fine.

I'd recommend starting with removing all sound devices, internal and external, as well as all drivers. Then install only the latest driver from the manufacturer of the motherboard.

Similar Messages

I updated my mac os x mountain lion to v10.8.5 and my internal speakers and even connected earphones are not working. Please help

i updated my OS on macbook pro 13inch from mountain lion v10.8.4 to mountain lion v10.8.5 and when i played songs on itunes there was no sound from the speakers, when i plugged in my earphones there was still no sound. i restarted my mac a few times but still it did not help. I need to get my speakers started soon. Please help

Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379
Ciao.

M-Audio FireWire Audiophile supported?

I just purchased the FireWire Audiophile, and it doesn't seem to work at all in Logic 7.1
I have been using Logic since Version 5, with the Emagic EMI 2|6, EDIROL UA-1D, MOTU 896HD, and Built-in audio interfaces. I switch between any of those quite often without problems, but Logic seems very unhappy when I switch to using the Audiophile, and it never plays more than a few samples before wedging. I have the latest driver version 1.5 from the M-Audio site.
Any ideas? I've written both M-Audio and Apple support about this, but no reply from either (except the automated one). I actually wrote M-Audio twice about the Audiophile, since I found a bug in their CoreAudio implementation (compare Audio MIDI Setup I/O faders/mute with the M-Audio FireWire console application).

rsdio, "M-Audio FireWire Audiophile supported?" #3, 06:44pm Sep 21, 2005 CDT
To clarify, I do not have the other audio interfaces attached while testing the M-Audio FireWire Audiophile.
It doesn't matter, just having the drivers installed can be enough to cause a conflict.
Not that it is completely related to your situation, but between OS 10.3.4 and OS 10.3.7 I could not have my M-Audio Delta PCI (Audiophile) drivers installed at all without them conflicting with my Digidesign drivers. (caused KPs immediately) This resolved under 10.3.8 but then got a little flaky under 10.3.9 (no KPs but occasional errors) So the OS has a part in too.
In Tiger I found I had to re-install the Delta drivers after installing DigiCoreAudio because there was a conflict there too.
the points I am making are that the order you install the drivers, and the OS version both have a part in it, so they are avenues you can explore. Or it may just be that the different drivers you are running are going to conflict anyway.
Oh, and one more, if there is an M-Audio MIDI driver, or any other un-used MIDI drivers, installed, delete that/them as the first line of attack. It may be all you need to do.

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Wayne

kmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Microphone speaker and audio jack is not working?

hi i buy a I phone 5 S in march from E max UAE . Its been 3 month only but my phone audio jackpot is not working ,microphone and speaker is not working moreover if i open some app for longer time and during charging it get hot. I took the phone to the store tell them the problem and the phone is in warranty also but they didn't change the device they say we cant change and just repair the device. its been two days my phone is back again i am facing the same problem .can anybody suggest me where should i go for complain and what i will do to change the device.

I've asked the hosts to relocate your post to the iPhone forum -> Using iPhone - this is the MacBook Pro forum.
Good luck,
Clinton

My Internal Microphone Array (IDT High Definition Audio Codec) is not working

Hi,
My Internal Microphone Array (IDT High Definition Audio Codec) is not working.
I cannot do Skype calls.
I have already tried everything but still I'm not able to fix the problem.
Could you please advice me what to do?
Could you please provide me with a link with the drivers I may need to reinstall.
My computer is HP, Windos 8.1, 64-bit operating system, Intel i-7 processor.
I would really appreciate your quick answer to resolve this issue.
Many thanks,
Antonio
This question was solved.
View Solution.

Hey,
Try installing this driver: IDT High-Definition (HD) Audio Driver
If that fails, try using the HP Recovery Manager to roll back to the factory installed driver.
Test after both. Let me know if either option worked.
I worked on behalf of HP.

Audio Service is not Working.

HI everybody,
So today i just turned my pc on after a few days and noticed that there was RED CROSS "X" on my volume icon. It says that Audio Service is not working. i opened services(service.msc) searched for it and when i tried to start
it gives me this ERROR! I searched for solutions over the net as well as here. Recommendations that i found were
>Reinstall the drivers
>Unisntall drivers from Device Manager and then reinstall. (WHEN I TREID TO INSTALL DRIVERS IT GAVE ME ERROR THAT "AUDIO SERICE IS NOT RUNNING AND COULDNT BE STARTED" )
>Run "RPC" service and "Endpoint service". Currently both are running !
Last but not least, u must be thinking that why i posted such a big post, this is because others problems were solved and issue was also a bit different. :D
(I tried to post two images but the site said that u are not allowed to post images and links!)
Thank you all in advance, and please help me quick to solve this problem. I cant play games without sound for long ! :"(

Hi
Are you installing new drivers downloaded from the manufacturer website or letting windows install it for you?
Try disabling the sound card in the bios, reboot and then enable it again, reboot and see what windows does.
Can you also run a sfc scan and see if there are any corrupted files?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Multicam source sequence - audio offset does not work when syncing via audio

Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
Unlesss I'm missing something?

I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Audio device is not working, i have installed proper drivers, but audio device is not working

hi,
I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system, My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

Tecra A8
Model No = PTA83L-04C02N
Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
Good luck!
-Jerry

My audio device is not working

hello
I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

Hello rasfunkey,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Internal Audio and M Audio Firewire Audiophile Not working.

Similar Messages

Maybe you are looking for