Internal Batch Number for specific Production Order Type

HI PP Guru
We need to activate Internal Batch Numbers to a specific Production Order type.
We need this at order confirmation level. i.e. (CO11/CO12)
Is it possible? HOW ?
Please let me know customizing Steps.
If this is not possible then, Batch number should be internally assgisned at Order release stage. Please let me know customizaing steps for this even.
Thks.

hi Siva
Thk for suggestion
However, if we do not wish to activate Internal Batch Assigment and want to remain on manual BUT still we want system should not allow duplicate BATCH NUMBER, then, is there any way to achive this.
This is because, once we manually enter batch in confirmation (CO11), we further break the material in to several part and we need to understand original batch number. For this we just take the original batch number and add further serial number like below
Orinigal Confirmation Batch Number - 100001
Batch Split of 10 - 10000101,10000102,..............10000110.
So, what we want is system should check that same batch number is exist or not in confirmation. Is it possible or how it can be handle.
thk in adv.
SK

Similar Messages

How to show the internal batch number for order in make to order scenario

Hi !!!
Gurus!!
I am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
How system will get the internal number batch.
I have config. batch management.
What should be the next process.
Regards,
Nitin

Hi,
QI am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
A. Yes you can see batch number for each order
QHow system will get the internal number batch.
A. there are two possiblities assign you batch number at production order before release or assign batch or each GR at the time of executing GR transaction.
QI have config. batch management.
A.In Material master you also have to tick for batch managemnt relevency
QWhat should be the next process.
A. Consult again if any thing missing
Regards,
Syed

Error Message for new production order type

I have created a new production order type and gone through all the configuration requirements that I'm aware of. In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
No reference document type defined for order type ZRWK
Message no. CO179
ZRWK being the new order type.
I've searched through many posts and found nothing relating to this message. Hopefully someone has encounted this before.
I'm sure I've missed something, but can't pinpoint what it is.
Help is greatly appreciated.

Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
The path is Print - Print Settings - Configuration Menu.
Diego

Batch Determination - Number of the production order

Hi All,
First of all i must say that my knowledge in this module is low. I am a FI, CO consultant but my administration ask me to check the following situation.
In Production Orders we want to attrib to the batch number the number of the production order.
Can we do that?
Can you give some details about that?
Best Regards
João Fernandes

Hi João Fernandes,
If I understood clearly, you want the batch number for the production order to be same as the production order number.
This is not possible in standard but can be achieved using the user exit (try SAPLV01Z).
Tell your abaper to write a code in that to pick up the batch number same as the production order number.
Regards,
Narendra Bora

Default of fixed batch number for production order header????

Hi Experts,
In SAP, when create a production order, in the production order Header view, in the "Good Receipt" Tab, there is a field "Batch" , which means "Assigns a material that is manufactured in batches or production lots to a specific batch ".
For some special reasons, we want for some certain materials,when create production order every time,the "Batch" field will be a fixed values.
For example,for material "AB1" ,"CD2",when create production order every time,the "Batch" field will be "2345" automatically,do not need input manually.But for all the other materials, the "Batch" field would be null ,no value.
How can I do this? How can assign fixed batch number values to some certain materials in production order?
If there needs some ABAP development,which user exit do I need??
Thanks for any reply!

Hi V.SURESH
Thanks very much!
I know what you mean. Default batch number in the production order eans, there is no use of using batch management.
In fact, my purpose is just want to deactivate the batch management for some certain materials.
So for some certain materials,when create production order every time,the "Batch" field will be a fixed values.
How can I do this? How can assign fixed batch number values to some certain materials in production order?
If there needs some ABAP development,which user exit do I need??

Same batch number for different order materials

Hi, pls advise can we assign same batch no's for different production order finished products?

Yadav,
Yes, it is possible to assign the same batch number to different production orders in the Order Goods Reciept tab. If you are not maintaining any batch in this field then you can manually create a batch in MSC1N and use the same when making GR using MB31 or MIGO.
Regards,
Prasobh

PP : Need to find Multiple Batches for different production Orders

Hi Experts,
I have a requirement that, user wants to see the "Single batch assigned for multiple production orders and different materials"
Which its a off case, it cannot be done , but i have gone with 1. So user wants to know all the Orders which has same batch but for different materials & Orders.
Please help me in this regard.
Br,
SandeepCH

Hi Shri,
Please find the attachment for your better understanding.
Yes, as you said one material can have multiple batches, But that same batch cannot be linked with other material. This was my requirement.
So now i want to know all the batches which came in double for different materials.
Br,
SandeepCH

Ugent: How to restrict a Material Type for a Specific Process Order Type

Hi All
Can any one please tell me how to restrict material type for specific process order type
We have Process Order type ZPBS for finished materials but while creating process order
if i give the material of semi finished material type the system let me create the process order
it should not as we have a separate process order type for semi finished materials that is ZPBS.
And vice versa
Please help me how to restrict these material types for specific Process Order Types.
Points ll be awarded accordingly
Bilal Athar

Hy Ghulam Mohammad,
Good Morning,
Pls go through below link
[http://www.sap-img.com/abap/what-is-user-exits.htm]
[http://www.sap-basis-abap.com/sapab013.htm]
Now regarding How to place your checks in User Exit, then pls explain your requirements to your Abaper , so that he or she can write it into programeble language.
Regards,
Dhaval

Limit the number of open production order

Dear PP experts,
I am working on discrete scenario where client want to limit the number of open production order per work center. The more elaboration is like, for one work center the only specific number of production should remain open (e.g. 5 production order in assembly shop) when user is trying to open 6th production order system should restrict that.
Does any standard functionality available in system or needs development?
Regards,
Shekhar

Dear,
You can do it with avilability check for materail and capacity.
In OPJK do the for your production order type as no release if materail and capacity i missing.
Hope clear to you.
Regards,
R.Brahmankar

Budgeting for CO production order

From KOT2 we can see budget profile exists for CO production order type CP01 and CP02.
But it is not allowed to use KO22 to enter budget amount.
Can anybody tell me how to set budget for CO production order?
Thanks~

Hi Ajay.
The reason why we want to control cost of production order is because there are too many subcontract items.
Sometimes works can be done within a plant are contracted outside.
Because there is no BOM or routing for a particular product,
we have to use CO production order instead of PP production order.
Planning on the order is also not possible.
That's why we want to set a budget to limit the use of subcontracting and also control production costs.
If Project System is activated, budgeting can be used on CO production order.
Since we are not using PS, we have to use internal order to collect subcontract related costs.
Best regards,
Sharon

Production Order Type In Costing.

Hi Gurus,
i have some Doubts in Costing, i have Run The Ck11n and Released it it is updated in MM Costing View.
1. i have completed All the Production process andAfter the Goods Recipt I tried to settle the Order in ko88.i got error that variance shuold be calluclated before settling the order. then i tried to calluclate the variance for the order there i got error stating no cost collector could be determined, creat cost collector.
then i tried to creat cost collector i got error that the order type is ctegory 10 it is not suuported to cost cgange catogiry 05.
1. sap standard order type pp01 holds category 10. then why systm is not allowing to create cost collector for pp01?
2. is it mandatory to use order category 05 if we want to use costing for the production order type.?
Regards,
Venkat.

Venkat,
You do not enter a production version in the order. The system cannot assign the order to any product cost collector. To solve this problem you create the order for the production version.
you have defined that the product cost collector is created for the production version. The corresponding product cost collector exists in the system. However, you create the order for BOM and routing.
Follow this link and do the set up first.
Order TYpe for Cost Collector
Thanks
Hrusikesh

Batch is blank for some production order number

Hi Experts,
For some cases planned order does not converting into production order,i mean batch(CHARG) is not updating.it seems production order link is missing,In CO03 transaction i'm not finding relative batch number for production order.
Let me know If you have any solutuion

Without further information on what information you need to extract from the Batch table and when, I have the following suggestion
The Batch Rows table IBT1 should be linked to the Production Transaction.
IBT1.BaseType = 60

Batch Number for Valuation Type in BOM item detail

Dear PP Expert.
Is it possible to maintain batch number for valuation type in BOM item detail ? My requirement is for example in bom item 10, component A is maintained with batch number for valuation type so that in production order batch number field automatically filled.
Fyi i have tried user exit : Enhancement for BOM item: PCSD0002. Here we can maintain valuation type for component in item detail in customer tab. But unfortunately valuation type here is not link with batch number for valuation type in Production order.
Regards,
Arman

Hi JH thanks for your quick reply,
Let me describe it more specific, I have two material FG and SFG. Material FG is maintained with valuation type so when we do goods receipt for SFG it's asked to input valuation type in batch field. In stock SFG material qty is separated for each valuation type like batch.
Now i want to maintain in BOM for FG, where component SFG has fix the valuation type / batch so that in production order we don't have to choose manually. Do you have any idea ?
Regards,
Arman

Process Order number as batch number for produced materiai

Hi gurus
Is it possible in SAP to automatically set the process order number as the batch number for an semi finished good or finished good? Is there a config like that in SAP?
Thanks

Hi,
Refer this [link|http://help.sap.com/saphelp_46b/helpdata/fr/e9/c6f9bdaa28d3119b440060b0671acc/content.htm]
you have to use EXIT_SAPLV01Z_001 and EXIT_SAPLV01Z_002 in the case were you want to Copying the production order number to the batch number.
Regards,
Dhaval

Automatic Batch Determination is not happening for New Sales Order Type

Dear Experts,
I have created a new sales order type ZBPY - For Free Sales, but automatic batch detrmination and batch pick up is not happening for new sales order type, but it is activated for all the other sales order types in Production Server, can any body let me know the steps how to map this new order type to batch management and let it behave like other order types.
Thanks in Advance.
Saravanan(EKS).

Hi Saravanan,
Kindly check the following steps for automatic batch determination.
1. First check the material is maintained with batch in the warehouse management.
2. Maintain new entry for search procedure for batch determination with the new created doc type.
3. Maintain new entry for automatic batch determination for sales order or automatic batch determination for delivery ( This depends on the business process of our client, whether they want to determine the batch with sales order or at the delivery level. check this and make new entry)
4. Create Batch using T.code MSC1N with proper date of manuf. and SLED.
5. Create Batch Search Strategy using T.code VCH1 with proper strategy type.
6. Maintain stock with active batch. check this with t.code LS26 or LS24.
regards
Ravishankar M

Internal Batch Number for specific Production Order Type

Similar Messages

Maybe you are looking for