Internal class type 023 cannot be used in class maintenance

Dear PP gurus,
I am creating class from t code CL01 and while entering class type 023 , i am getting a error message
"Internal class type 023 cannot be used in class maintenance" . when i pressed F4 , in the list 023 is not present.
In the develpopment client , when i do the same 023 , it allows be to create class
pls help me wher i am missing or?
Regards

Hello All,
I am facing a similar problem.
I have checked the following customization "SPRO --> Cross Application component -->Classification system --> Class --> Maintain Object type and class,
Here select the MARA table click on the object and check class type 023 is assigned or not."
Class type 023 is not assigned there. When i try to add a new entry I get the following error message
"Specify the key within the work area".
I referred to the following note :OSS Note 1066606, but that is concerned with AFS component.
Kindly provide me a solution as soon as possible.
Regards,
Julia

Similar Messages

AUSP class type 023 batch

Hi
I have few milion of entries in class type 023 - batch in AUSP table?
In MCH1 I can see only few thousands entries for batches linked with material.
But for those I can not find any relavant entries in AUSP.
We are using very limited functionality of batch management. No classification is maintained for batches.
What are the other objects (than material) that uses batches?
I need to answer the question if entries in AUSP can be deleted or archived?
Thanks for hints
Mariusz

this means you have values for characteristics that are not anymore in your system.
Please have a look into OSS Note 501463 - Deletion of table AUSP not complete
and Note 127635 - ZCLINOB2: Comparison tables INOB/AUSP against KSSK.
maybe they are helpful for your
Do you exchange batches with a APO system?
I have seen many OSS note while searching OSS with keyworkds "AUSP inconsistent"
MAybe there are more helpful reports for you to check and correct such data.
If you are unsure, then you should open a message to SAP

About Batch classification(Of class type 023) in new batch

hi:
   I had assigned a batch class 'ZBC'(Of class type 023) to material 'A'. So, when I use t-code "msc1n" to creat a new batch for the materia A, I find the system does not check the 'classification' view ,and after maintaing 'Basic Data1' view , I can directly save new batch even if the values of batch character is empty.I had specified the batch characer must be entry value in the batch class 'ZBC'(Of class type 023).
    I want to system check it ,and give me a message for it ,and couldn't save the batc if the values of batch character is empty.
   So ,I wonder how to control it?
Edited by: kaien wang on Jun 10, 2009 5:40 AM

Dear Amitabha,
Thans for you attention.
In my characteristics definition, I didn't use any reference table field . the values of 'addnl data' view in the characteristic is keeping blank.
best regards,
yours kaien

How to change material classification for class type 023

Hi Expert,
I want to change class ZSK_EXPIRY_DATE to ZSKK_GR_DATE under class type 023 in classfication tab (MM02). Understand that the same class also assigned to material and batch in MSC3N. So i'm sure it's not as easy asdo the direct change in CL20N. Can i anyone please guide me step by step to change it? What is the pre-requisite and the impact of the change that i have to care of..
Thanks/Regards,

Hi Crystal,
You consume all the materials created with the earlier batch classification and then try to change it. or keep the assinged class and then create your new required class and then assign the new class to the material in classification view and start using the new one.
Chris

Transaction type 100 cannot be used for activity 'Acquisition from invoice'

Hi
My user got the error message : Transaction type 100 cannot be used for activity 'Acquisition from invoice receipt w/ affil. comp.'
when post the invoice via MIRO t code for 98% of the total amount.
The posting was is related to affiliated company, & by right it should pick transaction type 153 but it is pointing to 100.
If user post 100% , no error.
Please advice.

Check any of the following notes:-
=> Note 972556 - MIRO: Incorrect movement type with affiliated companies
=> Note 1060719 - Error AAPO 176 for postings from Logistics without vendor
thanks
G. Lakshmipathi

Multiple classification In Class Type 023(Batch Class)

Dear All,
I like to do a multiple classification in Class Type 023(Batch Class) but in Configuration System not allowed to do any change in MCHA Object for multiple Classification
So pls give me a suggestion.
Regards,
Murari Shah

see OSS Note 115581 - No multiple classification for batches

"Material type HALB cannot be used with item category L (plant 1000)"

Hi Guys
I am trying to copy the BOM of a material.
The error msg.
"matrial type HALB cannot be used with item category L (plant 1000)"
Diagnosis: you want to enter a new componet with material type HALB and item category L.
Settings in IMG for production (master data> BOM > Item data > define item category) determine that inventory management for this item category is to be based on quantity.
However, other settings in the IMG for material HALB in plant 1000 determine that the quantities are not updated in the material master. This means that you cannot enter this material with item category L.
Can anyone tell me how to correct this error please.
Thanks.
Ahmad Yahya

Hi Ahmad,
Follow this navigation path in SPRO
IMG: Logistics > Material Master > Basic Settings > Material Type > Define Attributes (OMS2)
Select a material type ( like in your case HALB) and navigate to Quantity/Value Updates. Now try to locate your plant to which you want to assign your BOM to. And then set the flags Qunatity Updating and Value Updating and save.
Now, you can come out of CS01(BOM creation) transaction and re-enter CS01. Now you can maintain the data and error will not come.
Regards,
Amol

Cannot create class in system package while Using Sprite class

Hi i developed a game using Sprite class & imported
javax.microedition.lcdui.game.*; package. But when i tried to build this project it gave me "Cannot create class in system package" error. Worst thing is that now again if i build, then it displays error "package javax.microedition.lcdui.game.*; does not exist" . Pls help me

First exception means that you tried to create a class with the package name equaling one from the predefined libraries in midp/cldc.
For your second error, add all the jars you are using into the project's classpath.
Mihai

Type-Pools in SE11 used on Class Parameter

I have a strange one. In 46C have parameter on a method of a class that uses a data type from a type pool. Specific the parameter is a range type that is defined in the Type Pool. In 46C this syntax checks fine. But now we have upgraded our test system to 6.00 this no longer syntax checks. It Syntax checks ok in SE24, but in SE11 it errors out. In SE11 I get the error message The type "ZVMPL_TYRG_IDNFL" is unknown. I am on Basis Stack 13. Any insight on the problem would be appreciated.
Thanks.
Matthew
Here is the type pool
TYPE-POOL zvmpl .
TYPES:
BEGIN OF zvmpl_tyst_lifnr_vmpl,
    lifnr TYPE lifnr,
    name1 TYPE name1_gp,
    name_short TYPE name1_gp,
    bahns TYPE bahns,
    obj_vmpl TYPE REF TO zcl_masterpricelist,
END OF zvmpl_tyst_lifnr_vmpl,
zvmpl_tyit_lifnr_vmpl TYPE HASHED TABLE OF zvmpl_tyst_lifnr_vmpl
    WITH UNIQUE KEY lifnr,
zvmpl_tyrg_idnlf TYPE RANGE OF idnlf.
SE24 Definition of Class
class ZCL_MASTERPRICELIST definition
public
create public .
" public components of class ZCL_MASTERPRICELIST
" do not include other source files here!!!
public section.
type-pools ZVMPL .
methods PL_GET_ZVMPL_WHERE
    returning
      value(RE_RG_IDNLF) type ZVMPL_TYRG_IDNLF .

everything seems to be fine for the type grp in se11. just goto the the change mode in se11 for the type group and click on "Display object list" (CTRLSHIFTF5). Then activate teh object name u find in the repo.browser
Edited by: Prabhu S on Mar 11, 2008 8:16 AM

Error: CENVAT type tax cannot be used in DPO or DPI by far

Hi,
I am getting the above mentioned error when i post an A/P Down Payment Request / Invoice Document in SAP B1 2007B with respect to the GRPO as the base document. All the items are excise items. Under Tax Code column, it is BED+VAT which is reflected from the base document. I would also like to know the complete process flow in using Down Payment Request / Invoice for both Purchase & Sales process with outgoing & Incoming Payments.
Thanks & Regards,
Kaushal Mittal
Edited by: Rui Pereira on Jan 19, 2009 5:18 PM

Dear Kaushal,
At present it is not possible to create Down Payment Invoice with Excisable Item and Excisable Tax Code, which is currently system behavior.
Regards
Preety Goel
SAP Business One forums team

Batch Classification by class type 022

Hi all,
We are using batch management at material level and present class type 023. We are looking at changing the class type to 022 as we need some information to be retained at plant level.
While creating class for class type 022 the system gives an error " Internal class type 022 cannot be used in class maintenance
Message no. CL089"
Can somebody let me know the reason and solution for this error? Is it due to the fact that we have set the batch at material level?
Also, it would b great if someone can share his/her experience in changing batch clases, even class conversion.
Best Regards,
VS

Hi VS,
I think that you should change the customizing first. Class types 022 and 023 can not be created simultaneously. It is either 022 or 023.
Be careful : I did it long time ago but there is one way you can do (023 to 022 or 022 to 023 I don't remember) but you cannot reverse it.
Rgds,
Philippe

Class type has not been defined in Customizing as allowed for variant confi

Hi,
I want to use class type 200 in the varient configuration, but following error is showing so please reply me .
Class type 200 cannot be used for materials
Message no. CU731
Diagnosis
This class type has not been defined in Customizing as allowed for variant configuration.
Procedure
Choose a class type which is allowed for variant configuration.
Thanks

Thanks for ur reply.
please help me regarding my requirements
I will have to use the varient configuration. In this scenario multilevel BOM BOMis present & for every level varient is present.
so how to map this scenario, so that it should pop up at the time of sales order creation. i.e. it should ask that which varient should be used at all the levels in the BOM.
Thanks & Regards.
Abhi

How an AUC asset class can be assigned to internal order type

Hi
We want to create new AUC asset class for our requirement. For that purpose we want to use existing internal order type of my new AUC asset class also. When we create internal order in KO01 and create AUC in same step new asset class should be picked up. Please explain me how we assign internal ordet type to AUC.
Regards
Padma

Hi Padma
Do the following configuration steps for AuC scenario.
1. Asset under Construction
1.1 Define Screen Layout for Asset Master Data
IMG Investment Management Internal Orders as Investment Measures
Master Data Assets under Construction Define Screen Layout for
Asset Master Data
1.2 Define Asset Classes
IMG Investment Management Internal Orders as Investment Measures
Master Data Assets under Construction Define Asset Classes
2. Asset under Construction
2.1 Define Model Orders
IMG Investment Management Internal Orders as Investment Measures
Master Data Orders Define Model Orders
2.2 Define Order types (KOT2_OPA)
IMG Investment Management Internal Orders as Investment Measures
Master Data Orders Define Order Types
2.3 Define Investment Profile and Assign
IMG Investment Management Internal Orders as Investment Measures
Master Data Define Investment Profile
3 Settlements
3.1 Maintain Allocation structure
IMG Investment Management Internal Orders as Investment Measures
SettlementMaintain Allocation Structures
1.2 Maintain Settlement Profile
IMG Investment Management Internal Orders as Investment Measures
SettlementMaintain Settlement Profile
3.3 Maintain Number Ranges for Settlement Documents
IMG Controlling Internal Orders Actual Postings Settlement
If you want budgetary control also do the following steps:
3 Planning and Budgeting
3.1 Maintain Planning Profiles
IMG Investment Management Internal Orders as Investment Measures
Planning and Budgeting Maintain Planning Profiles
3.2 Maintain Budget Profile
IMG Investment Management Internal Orders as Investment Measures
Planning and Budgeting Maintain Budget Profile
3.3 Define Tolerance Limits for Availability Control
IMG Investment Management Internal Orders as Investment Measures
Planning and Budgeting Define Tolerance Limits for Availability Control
Regards
Kiran

BAPI_OBJCL_GET_KEY_OF_OBJECT - Class type 001 requires additional objects

ABAP'ers
I am trying to use BAPI's to complete class assignments (mimicking CL20N).
I am using BAPI_OBJCL_GET_KEY_OF_OBJECT to get the internal object key that is needed for BAPI_OBJCL_CHANGE_KEY, which I am using to complete the classification.
When I execute BAPI_OBJCL_GET_KEY_OF_OBJECT for class type 002 I get the internal key needed for the second BAPI.
When I execute the same BAPI for class type 001 I get the following error:
"CL669 - Class type 001 requires additional objects"
I have seen other posts on the forums on how to do this for class type 023, but I need to complete this for class type 001.
What are the additional objects needed?
Can I use this feature if a material HAS NOT been extended to a plant or storage location?
I have looked in table INOB and there are no entys for this class type - is this normal? Is there something that I am missing?
I have already tried internal and external values, concatenating with the client number and plant number but still get the same error.

Hey Chris,
You cannot use the BAPI for class type 001, This BAPI can only be used with class types which have multiple objects enabled.
For changing the characteristics of material try using BAPI_OBJCL_CHANGE.
Here the key of the object will be your material number

Activation of History Log for Material Classification CLASS TYPE 001

Hi All.
I've a question about this object.
We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
Reference are sap notes 942691 and 943559.
I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
I think that's a serious problem, isn't it? Or is there any solution about ?
Thanks for Help!
_______> old message
This report RCCLUKA2 does 5 steps.
1 step: activation flag for multiple objects in table TCLA and TCLAO only for input class type (in this case 001 -> MATERIAL);
2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
3 step: delete all KSSK data and AUSP data for class type 001, 10.000 records every loop;
4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
DEQUEUE ALL
We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
Do you have any suggestion about this?
RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
Thanks for your help
Message was edited by: Roberto Vacca

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

Internal class type 023 cannot be used in class maintenance

Similar Messages

Maybe you are looking for