Internal delivery chnl, file doesn't get picked up, no trace log file gener

I have defined an internal File delivery channel as part of a trading agreement between host and remote partner (Custom doc over Internet - AS2), configuration including agreement has been deployed, but the file doesn't get picked up. I have made sure that the directory specified in the delivery channel does exist and all permissions are set up (Windows 2003 server).
A have specified directory for oracle.tip.adapter.b2b.transportTrace property in ip.properties, however no log file gets generated (restarted b2b).
I am sure it must be something basic I have overlooked, any ideas, folks?

Thanks again,
There is an exception in the log file, I guess that explains why the file doesn't get picked up. Not very informative, though :
2007.11.05 at 12:40:54:856: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2007.11.05 at 12:40:54:856: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2007.11.05 at 12:40:54:856: B2BStarter thread: Repository - (DEBUG) CacheServiceManager.clearGlobalCache()
2007.11.05 at 12:40:54:856: B2BStarter thread: B2B - (ERROR) Error -: AIP-50055: Error in configuration file
     at oracle.tip.adapter.b2b.init.Repository.b2bEngineConfiguration(Repository.java:611)
     at oracle.tip.adapter.b2b.init.Repository.initialize(Repository.java:552)
     at oracle.tip.adapter.b2b.init.B2BServer.readRepository(B2BServer.java:432)
     at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:164)
     at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:217)
     at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:104)
     at java.lang.Thread.run(Thread.java:534)

Similar Messages

HT1414 Could someone plizzzz tell me...I have an iphone4 32G, the problem is a complete black screen I'm unable to reboot it doesn't get picked up by itunes Pc, direct wall socket charging nothing it is got me.. i have tried everything to no avail.

I have an iphone4 32G, the problem is a complete black screen, I'm unable to reboot it doesn't get picked up by itunes Pc, direct wall socket charging nothing happens so it is got me beat?.. i have tried everything but no hope, Has anyone else had this problem? is there a solution, besides having to pay $199 for hardware replacemente... thank you to anyone with info...

bellaluna59 wrote:
So let me get this straight if I pay them [Apple Store] $149
they will replace my device? Is that correct?
Assuming it is in one piece and otherwise meets the conditions for an Out of Warranty replacement, yes.
Conditions are:
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.

CSV File Doesn't Get Included In The Package

Hello friends,
We have problem with packaging the indesign document.
we are opening have data merge CSV files which show in the links pallet.
when we run the package command the .csv file doesn’t get included in the package
so if there are any extra settings that copies .csv files in the current package please help me.
Regard
Tahir

Hi
And how about this technet article
http://technet.microsoft.com/en-us/library/ff980461(v=exchg.141).aspx
To avoid this error in the future, follow one or more of these steps:
Do not manually modify message tracking log files. By default, these files are located in the following directory: C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\MessageTracking.
Make sure that your file-based antivirus software is configured to exclude file directories that contain message tracking log files. For more information about configuring your file-based antivirus software on an Exchange server, see
File-Level Antivirus Scanning on Exchange 2010.
Review the System log for disk-drive-related events. Use the information in those events to determine whether the disk that stored the log files has any hardware failures. You may have to use
CHKDSK tool to check a disk and display a status report. For more information about
CHKDSK, type CHKDSK /? at a command prompt.
Cheers
Zi Feng
TechNet Community Support

[svn:osmf:] 15934: Ensure OSMFPlayer doesn' t get stuck on preloader if configuration file is not present.

Revision: 15934
Revision: 15934
Author:   [email protected]
Date:     2010-05-06 14:18:56 -0700 (Thu, 06 May 2010)
Log Message:
Ensure OSMFPlayer doesn't get stuck on preloader if configuration file is not present.
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/org/osmf/player/preloader/Preloader.as
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/application/ChromeApplication.as

Thank you for the replies,
unfortunately it's not the router. I usually switch on/off the router if I'm not at home. Therefore I have ruled out from the very beginning the router. And I'd rule out an upgrade of arch's packages as well. I installed->upgraded all packages after a fresh installation of arch, and then I started the configuration...
ewaller, nice "How to"
Cheers
Last edited by bradomyn (2011-09-13 10:59:39)

I get the following error: Error log file location: /Library/Logs/Adobe/Installers

I get the error U44M1P7 Error log file location: /Library/Logs/Adobe/Installers
Does anyone have an idea what I need to do? Thanks

Did you ever find a solution? I am in sort of the same boat. I even had an Adobe rep try to help me. For some reason my Adobe App Manager does not work on my Macbook. It orginally did but one day it just would not launch. After numerous attempts of uninstalling and re-installing without success, the only workaround solution was to create another user on my Macbook and install the Application Manager on that user's account. I can then download the apps / programs and updates from there. When I log out of that user and back into my main account the Adobe programs work....well most of them. I have noticed that certain programs, like Muse will launch and work correctly under my second user account but it will not luanch without error on the main account.
The fact that no one at Adobe seems to be able to provide a solution is frustraing. Everything worked fine one day, then its all messed up. Switching users is not an ideal solution at all.

I've usd RecMyFile to recover .JSON file but I get "Unable to process the backup file" be like Unknown format

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/887204]]</blockquote>
I've usd RecMyFile to recover .JSON file but I get "Unable to process the backup file" be like Unknown format
like this > http://goo.gl/pHTkr < Please help me Please

All worked very well - this is a good solution. The key was finding the Profiles in my Users folder.

Windows Server 2012r2 Failover Cluster Event Trace Log files

Hi
The only documentation I can find regarding event trace log files (Diagnostic.etl.*) for Failover Clustering relate to Server 2008/2008r2, which state that the etl files should be in C:\Windows\System32\winevt\Logs.
I have been exploring a clustering lab for Server 2012r2 and cannot find these files in that folder.
Strangely the PS cmdlet Get-ClusterLog still works!
Where are the etl files?
TIA

Hi,
Please check if the log is available in C:\ProgramData\Microsoft\Windows\WER\ReportQueue\.
If not, you can use Get-ClusterLog with the Destination parameter to get the log file.
Destination
Specifies the location to copy the cluster log(s) to. To copy to the current folder use "-Destination ." for this parameter.
http://technet.microsoft.com/en-us/library/ee461045.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Data Integrator build failure - could not open trace log file

HI, this is regarding data integrator 11.5. I have a job that failed trying to run a data flow with the below error. Its run perfectly fine plenty of times in the past. It looks like it just couldn't open the trace log file that it had been writing to... anyone know what would cause this? No one would have been opening or modifying that file during the job except for the job itself. I was just wondering if anyone has run into this before. I am sure it will work if I just
(11.5) 03-27-08 02:05:20 (E) (1128:5536) RUN-050011: |Dataflow xMatter_Exception_Fee_Delta_DF
Error: .

HI, this is regarding data integrator 11.5. I have a job that failed trying to run a data flow with the below error. Its run perfectly fine plenty of times in the past. It looks like it just couldn't open the trace log file that it had been writing to... anyone know what would cause this? No one would have been opening or modifying that file during the job except for the job itself. I was just wondering if anyone has run into this before. I am sure it will work if I just
(11.5) 03-27-08 02:05:20 (E) (1128:5536) RUN-050011: |Dataflow xMatter_Exception_Fee_Delta_DF
Error: .

Many trace log file in udump?

Hello,
when I turn on sql_trace:
SQL>alter system set sql_trace=true;
and I don't connect to it. But in udump folder've many trace log file.
I don't understand!
Help!

All technical errors (lack of space, quota exceeded, primary key violations, etc,etc) will automatically result in a trace file in the udump directory. Not reading those trace files, and just worrying about the amount of space they take, is not what you should do, you should address the issues diagnosed in those trace files.
Sybrand Bakker
Senior Oracle DBA

CLoud computing workload trace log file

Hi. i need a cloud system workload trace based on virtualization.
in parallel workload archive (http://www.cs.huji.ac.il/labs/parallel/workload/) and in grid workload archive (http://gwa.ewi.tudelft.nl/pmwiki/pmwiki.php?n=Main.Home) we have grids workload but no virtulization is mentioned.
is there any website that gives trace log files in any format for a cloud network?

Same problem please help me..
middaily

File is not getting picking UP by B2B

Hi
I have done a new trading partner setup and I have done below configuration for the new Trading partner. Please find the details
Business Protocol = EDI X12 over Generic Exchange
1) Delivery Channel
2) Document Exchange
3) Transports
4) Transport Server
And I have created below configuration at Host Trading partner side...
1) Delivery Channel
2) Document Exchange
3) Transports
4) Transport Server
After droping the file File is not getting pickup by B2B. And I have tested the .trc file (trace file) and b2b.log file. No entries has been recorded.
Is there any way I can debug to see why B2B is not able to pickup the file.
Regards
Kiran

Ramesh
We are sending 997 to our trading partners.
I believe Host will pickup the file so I have sent up Host level delivery channel to pick the file and I have setup trading partner level Delivery channel to send 997 to them.
Could you please let me know this is correct? If this is correct what could be the problem not able to pickup the file.
Regards
Kiran

Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)

This is most commonly due to installing Photoshop CS/CS2 before doing an archive and install of Mac OS10.3 or OS10.4. One solution is to reinstall Photoshop 7/CS/CS3 after you have installed Mac OS10.3 or OS 10.4. If you have Photoshop 7 and 8(CS), the easiest way to reinstall Photoshop (without disturbing the original installation) is to install to your desktop. After the install is done just trash the Photoshop folder on the desktop. Note: This will only work with Photoshop 7 and 8(CS) but not with 9 (CS2). Photoshop CS2 you must delete the Photoshop CS2 folder. If you have any 3rd party Plugins or presets remove them from the folder before deleting. Just placing the folder in the trash will not work it must be deleted. After reinstalling CS2 you can now put all 3rd party Plugins and presets back in the new folder. --------------------------- Another solution courtesy Anne Shelbourne Open your Previous System folder. Find "Adobe Unit Types". Copy it into: <Your current system Hard Drive>/Library/ScriptingAdditions/ Then reboot your Mac. --------------------------- However, if you happen to be running a non-English version, like Photoshop CS CE or Photoshop CS ME, it appears the missing file does not get installed. You would need to install and delete the international English version first.

The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
One way to get it back is to reinstall Photoshop, the other is to add this file again.
You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
It is only 3,7 KB big.
You put the file you download here:
[hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

How to get the Form runtim diagnostics log file

Hi,
I followed the instruction of Metalink Notes:
R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications http://ID 438652.1
Option 1: Obtain FRD Trace Using Profile Options
Method 1: Using profile option 'ICX: Forms Launcher'
I was not able to get the log file.
Any suggestions

Yes, I follow the instruction, set profile at user level, and bounce Apache.
When I log in to application, I do see a message that the low level trace is enabled.
the directory is:
/u1/dev/inst/apps/apps/dev/logs/ora/10.1.2/forms

How do you get rsync to output a log file - don't understand the MAN pages sorry

Hi There,
Just trying to backup our web hosting server using rsync but can't figure out how to add a log file.
The MAN pages say to use the following syntax:
rsync -av --rsync-path="rsync --log-file=/tmp/rlog" src/ dest/
But when I add that log command into my call like this:
rsync -avz -e --rsync-path="rsync --log-file=/Users/username/rsync.log" ssh user@server:/home/ /Volumes/ServerVolume/webserver-backups/LIVE/home/
I get errors and the command won't run - obviously my syntax is wrong somehow.
Does anyone know how to add a log file to an rsync command?
Any help would be much appreciated.

If that second example is your specific entry then the answer is obvious.
You need to more closely follow your quotes. All quotes have to be balanced (meaning that whenever you open a set of quotes there needs to be a matching close quote).
In your case you state:
rsync -avz -e --rsync-path="rsync --log-file=/Users/username/rsync.log"
Note how your quotes are arranged... you're telling rsync that --rsync-path is "rsync --log-file=/Users/username/rsync.log", and there's no surprise that it fails.
The correct format for this would be more like:
rsync -avz -e --rsync-path="rsync" --log-file="/Users/username/rsync.log"
(although I also question the validity of the --rsync-path command... are you sure that's right? because I'm not.
Beyond that, though, the file arguments are incorrect - or, at least, there's a superflous 'ssh' command that's snuck its way in there somehow...

Ipod touch 4g is in recovery mode, whey try to restore it thorugh iTunes, I get error 40 below is log file....

pls help me to fix this problem.
log file...
2014-02-24 14:04:20.396 [1192:14d4]: restore library built Jan 7 2014 at 02:02:33
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: iTunes 11.1.4.62
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Software payload version: 10B500
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Using iTunes state machine
2014-02-24 14:12:16.573 [1192:10d0]: iTunes: Specifying UOI boot image
2014-02-24 14:12:16.774 [1192:10d0]: requested restore behavior: Erase
2014-02-24 14:12:16.774 [1192:10d0]: requested variant: Erase
2014-02-24 14:12:16.997 [1192:10d0]: *** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
2014-02-24 14:12:17.390 [1192:10d0]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 063BE060 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 063BFF08 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 063BECC0 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 063BFDE8 [720A907C]>{length = 20, capacity = 20, bytes = 0x947ce636269ab8f999739b5a72d820c70102912a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 063BEC78 [720A907C]>{length = 20, capacity = 20, bytes = 0x86aa6a33d416b8183226d0b9188df879c0666e8a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 063BF890 [720A907C]>{length = 20, capacity = 20, bytes = 0xd1534e338ae80b9b4addae3c77a83a6186fe75ab}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 063BFE78 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 063BF338 [720A907C]>{length = 20, capacity = 20, bytes = 0x79be5d2f2f7054aa2d7bdd5b66e3a0eca07a725b}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 063BFE30 [720A907C]>{length = 20, capacity = 20, bytes = 0x1abed33b398f978c681b346ea167eb26eaf3b38e}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 063BDF88 [720A907C]>{length = 20, capacity = 20, bytes = 0x21abcad73c393fb9d197b34403d52ec82643ffc4}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 063BEC30 [720A907C]>{length = 20, capacity = 20, bytes = 0xfa0dc3003aeb828feda55a4ffb8027d10f054bce}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 063BFDA0 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 063BFD58 [720A907C]>{length = 20, capacity = 20, bytes = 0xc504724a963b954e32478d6920311a32baca15b9}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 063BFC38 [720A907C]>{length = 20, capacity = 20, bytes = 0x808a3980c646bd6d87921c9dba79c54a7759395a}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 063BED08 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 063BF578 [720A907C]>{length = 20, capacity = 20, bytes = 0x62d392da7901734968084e882ab8d687bc917be8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 063BFBA8 [720A907C]>{length = 20, capacity = 20, bytes = 0x059a392a0e7dccbfdc2f918cd59f4f5b4b140df8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 063BF410 [720A907C]>{length = 20, capacity = 20, bytes = 0x421d229710239b268c3a2544a4fb161a3d6288aa}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 063BF3C8 [720A907C]>{length = 20, capacity = 20, bytes = 0xa01b8483c6d2f2355569951d0e72df454f4432a7}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 063C3700 [720A907C]>{length = 20, capacity = 20, bytes = 0x9738ff132ae5b77833acdf2aa72af1558c4734d2}
2014-02-24 14:12:22.431 [1192:10d0]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
2014-02-24 14:12:22.685 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-request.plist
2014-02-24 14:12:24.350 [1192:10d0]: amai: tss_submit_job: HttpQueryInfo returned 200
2014-02-24 14:12:25.032 [1192:10d0]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
2014-02-24 14:12:25.078 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-response.plist
2014-02-24 14:12:26.597 [1192:10d0]: amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
2014-02-24 14:12:27.466 [1192:3a4]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:27.467 [1192:3a4]: iBoot build-style = RELEASE
2014-02-24 14:12:27.468 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.469 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.471 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.472 [1192:3a4]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:27.473 [1192:3a4]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:27.474 [1192:3a4]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:27.475 [1192:3a4]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:27.476 [1192:3a4]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:27.477 [1192:3a4]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:27.477 [1192:3a4]: radio-error not set
2014-02-24 14:12:27.478 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.480 [1192:3a4]: <Recovery Mode Device 025E0430>: production fused device
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.482 [1192:3a4]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:27.482 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 4 progress -1
2014-02-24 14:12:30.448 [1192:3a4]: bootstrapping restore with iBEC
2014-02-24 14:12:30.449 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:30.463 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 31 progress -1
2014-02-24 14:12:31.463 [1192:3a4]: <Recovery Mode Device 025E0430>: Recovery mode succeeded
2014-02-24 14:12:37.516 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:12:37.521 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:37.590 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.622 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.651 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.664 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.664 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, new device
2014-02-24 14:12:37.665 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:37.692 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.716 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.739 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 1
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 1, connected: 0
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:12:37.870 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.870 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.877 [1192:1558]: Recovery mode device connected
2014-02-24 14:12:37.877 [1192:1558]: Found new device.
2014-02-24 14:12:37.880 [1192:1450]: _AMRecoveryModeDeviceFinalize: 025E0430
2014-02-24 14:12:37.881 [1192:14d4]: iTunes: SCEP 2
2014-02-24 14:12:37.969 [1192:544]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:37.970 [1192:544]: iBoot build-style = RELEASE
2014-02-24 14:12:37.970 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 44 progress -1
2014-02-24 14:12:37.970 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:37.970 [1192:544]: requested variant: Erase
2014-02-24 14:12:37.971 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:12:38.675 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.677 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:38.677 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:38.677 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:38.677 [1192:544]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:38.677 [1192:544]: radio-error not set
2014-02-24 14:12:38.677 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.678 [1192:544]: <Recovery Mode Device 025DFDD0>: production fused device
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.679 [1192:544]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:38.679 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 4 progress -1
2014-02-24 14:12:41.655 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:41.656 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:41.656 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:41.656 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.659 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.661 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.664 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.666 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 42 progress -1
2014-02-24 14:12:41.666 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.669 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:42.160 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:12:42.163 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:42.231 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.285 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.340 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.364 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:42.367 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:42.432 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.487 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.541 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.566 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:42.706 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:42.706 [1192:544]: command device request for 'getenv ramdisk-size' failed: 2008
2014-02-24 14:12:42.707 [1192:544]: Unable to query iBoot ramdisk-size. Libusbrestore error : 67108864
2014-02-24 14:12:42.707 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 5 progress -1
2014-02-24 14:12:43.100 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:43.100 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:43.100 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:43.102 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:43.102 [1192:544]: command device request for 'getenv ramdisk-delay' failed: 2008
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.187 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.227 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.260 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.272 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.389 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.412 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.435 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.446 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:45.138 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 6 progress -1
2014-02-24 14:12:46.148 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 7 progress -1
2014-02-24 14:12:46.482 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 8 progress -1
2014-02-24 14:12:46.483 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:46.484 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:46.484 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 9 progress -1
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: Recovery mode succeeded
2014-02-24 14:12:48.195 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:48.200 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.201 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 1
2014-02-24 14:12:48.201 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:48.201 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:48.210 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.211 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.214 [1192:1558]: _AMRecoveryModeDeviceFinalize: 025DFDD0
2014-02-24 14:12:48.382 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:13:00.982 [1192:cfc]: Mux version 3 event happened
2014-02-24 14:13:00.982 [1192:cfc]: Passing control to mux version 2 handler
2014-02-24 14:13:00.983 [1192:cfc]: Muxed mode device connected
2014-02-24 14:13:01.049 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.055 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.266 [1192:1664]: received kAMDeviceAttached action, device id E80CE514C875BC07 (0641AB88), AFC error 0XE8000028
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Restore-mode device appeared, device 0641AB88
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
2014-02-24 14:13:01.267 [1192:1664]: <Restore Device 06F59780>: operation 3 progress -1
2014-02-24 14:13:01.272 [1192:1664]: <Restore Device 06F59780>: operation 4 progress -1
2014-02-24 14:13:01.297 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.300 [1192:1664]: Supports value queries: 1
2014-02-24 14:13:01.314 [1192:e7c]: value query for 'SerialNumber' returned 'C3VDMTBQDCP9'
2014-02-24 14:13:01.314 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.321 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.326 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.336 [1192:1154]: Found new device
2014-02-24 14:13:01.368 [1192:f44]: <Restore Device 06F59780>: operation 44 progress -1
2014-02-24 14:13:01.368 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:01.368 [1192:f44]: requested variant: Erase
2014-02-24 14:13:01.372 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:13:02.147 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.149 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.166 [1192:f44]: fixed TcpWindowSize (65535) can cause restore failure if too large
2014-02-24 14:13:02.238 [1192:f44]: device did not return saved USB log
2014-02-24 14:13:02.238 [1192:f44]: device had saved panic logs: panic(cpu 0 caller 0x80632111): "partition scheme present; however, no partition devices were created"@/SourceCache/IOFlashStorage/IOFlashStorage-558.4/IOFlashPartitionSchem e.cpp:267
Debugger message: panic
OS version: 9A405
Kernel version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:33:58 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8930X
iBoot version: iBoot-1219.43.32
secure boot?: YES
Paniclog version: 1
Epoch Time: sec usec
Boot : 0x526e9493 0x00000000
Sleep : 0x00000000 0x00000000
Wake : 0x00000000 0x00000000
Calendar: 0x526e94a6 0x000e2944
Task 0xc0562d20: 2451 pages, 81 threads: pid 0: kernel_task
 thread 0xc064b230
 kernel backtrace: cb643e2c
 lr: 0x8007cc6b fp: 0xcb643e58
 lr: 0x8007d26f fp: 0xcb643e88
 lr: 0x80016391 fp: 0xcb643ea0
 lr: 0x80632111 fp: 0xcb643ecc
 lr: 0x806323b9 fp: 0xcb643ee0
 lr: 0x8020dd3b fp: 0xcb643f18
 lr: 0x8020db31 fp: 0xcb643f5c
 lr: 0x8020e509 fp: 0xcb643f80
 lr: 0x8020e2e5 fp: 0xcb643fa8
 lr: 0x8007b37c fp: 0x00000000
Task 0xc0562ac0: 283 pages, 3 threads: pid 1: launchd
Task 0xc0562860: 515 pages, 1 threads: pid 2: launchctl
Task 0xc0562600: 690 pages, 1 threads: pid 3: restored_externa
Task 0xc05623a0: 3000 pages, 2 threads: pid 4: restored_externa
2014-02-24 14:13:02.248 [1192:f44]: connected to service com.apple.mobile.restored
2014-02-24 14:13:02.248 [1192:f44]: using protocol version 12
2014-02-24 14:13:02.256 [1192:f44]: unable to open device_map.txt: No such file or directory
2014-02-24 14:13:02.257 [1192:f44]: board config = n81ap
2014-02-24 14:13:02.264 [1192:f44]: no value returned for BootArgs
2014-02-24 14:13:02.264 [1192:f44]: _copyDeviceProperty() failed for restore bootargs
2014-02-24 14:13:02.272 [1192:f44]: no value returned for MarketingPartNumber
2014-02-24 14:13:02.272 [1192:f44]: _copyDeviceProperty() failed for mpn
2014-02-24 14:13:02.273 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.274 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.285 [1192:f44]: value query for 'HardwareModel' returned 'N81AP'
2014-02-24 14:13:32.300 [1192:f44]: <Restore Device 06F59780>: operation 28 progress -1
2014-02-24 14:13:32.364 [1192:f44]: device returned CFError with code 40
2014-02-24 14:13:32.364 [1192:f44]: dumping CFError returned by restored:
2014-02-24 14:13:32.364 [1192:f44]: CFError domain:AMRestoreErrorDomain code:40 description:storage device did not become available
2014-02-24 14:13:32.384 [1192:f44]:
==== device restore output ====
"P=N81 m=2.2 V=m"
AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-169.10 Feb 13 2013 22:10:14
AppleBCMWLANCore::init(): AppleBCMWLANV2-169.10 Feb 13 2013 22:10:17
000522.906303 wlan.W[0] AppleBCMWLANProvisioningManager::parseApplePrivateCIS(): @24 - Invalid 2.4 GHz Cal data in tuple 0x02
000522.907778 wlan.N[1] AppleBCMWLANProvisioningManager::handleBluetoothRegistrationGated(): Wrote bluetooth Mac Addr <<<mac address>>>
000522.909596 wlan.N[2] AppleBCMWLANConfigManager::gatherParameterData(): AWDL is not supported.
000522.914563 wlan.N[3] AppleBCMWLANCore:start(): Starting with MAC Address: <<<mac address>>>
000522.914795 wlan.W[4] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 80, error 61 (state 0x20)
IO80211PeerManager::initWithInterface cant add monitoring timer
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x916e0600
000522.916824 wlan.N[5] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x83b41000 (this 1, provider 0)
000522.916944 wlan.N[6] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
display-scale = 2
display-rotation = 0
found suitable IOMobileFramebuffer: AppleCLCD
display: 640 x 960
found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice - Configuration: iPod USB Interface
AppleSynopsysOTGDevice Interface: USBAudioControl
AppleSynopsysOTGDevice Interface: USBAudioStreaming
AppleSynopsysOTGDevice Interface: IapOverUsbHid
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice Interface: AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 13 2013 22:02:59
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
read new style signature 0x43313131 (line:389)
[FTL:MSG] VSVFL Register [OK]
[WMR:MSG] Metadata whitening is set in NAND signature
[FTL:MSG] VFL Init [OK]
[VFL:ERR] _LoadVFLCxt(line:1479) fail CS 1!
[VFL:ERR] _LoadVFLCxt(wCSIdx:1)(line 1779) fail!
[WMR:ERR] VFL_Open failed
AppleNANDLegacyFTL::start: AND init failed
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49152 62078<-usb->512
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(12, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(15, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(18, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49153 62078<-usb->768
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49154 62078<-usb->1024
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49155 62078<-usb->1280
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816210
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49156 62078<-usb->1536
AppleUSBDeviceMux::handleConnectResult new session 0x91816268 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816268
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49159 62078<-usb->2304
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49162 62078<-usb->3072
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49163 62078<-usb->3328
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49164 62078<-usb->3584
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'BootArgs' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'MarketingPartNumber' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
client protocol version 13
*** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
Restore options:
 UUID => <CFString 0x1ed27a50 [0x32b100]>{contents = "B30995A9-9CBE-F743-9507-039BDD0D56EF"}
 MinimumSystemPartition => <CFNumber 0x1ed279a0 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
 SystemPartitionSize => <CFNumber 0x1ed28300 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
 SystemPartitionPadding => <CFBasicHash 0x1ed27470 [0x32b100]>{type = mutable dict, count = 5,
entries =>
 2 : <CFString 0x1ed277b0 [0x32b100]>{contents = "128"} = <CFNumber 0x1ed279d0 [0x32b100]>{value = +1280, type = kCFNumberSInt64Type}
 3 : <CFString 0x1ed27ce0 [0x32b100]>{contents = "16"} = <CFNumber 0x1ed27a00 [0x32b100]>{value = +160, type = kCFNumberSInt64Type}
 4 : <CFString 0x1ed1f1a0 [0x32b100]>{contents = "32"} = <CFNumber 0x1ed274d0 [0x32b100]>{value = +320, type = kCFNumberSInt64Type}
 5 : <CFString 0x1ed27100 [0x32b100]>{contents = "8"} = <CFNumber 0x1ed282f0 [0x32b100]>{value = +80, type = kCFNumberSInt64Type}
 8 : <CFString 0x1ed274e0 [0x32b100]>{contents = "64"} = <CFNumber 0x1ed27340 [0x32b100]>{value = +640, type = kCFNumberSInt64Type}
entering partition_nand_device
device supports boot-from-NAND
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49165 62078<-usb->3840
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49166 62078<-usb->4096
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49167 62078<-usb->4352
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49168 62078<-usb->4608
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49169 62078<-usb->4864
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
[IOFlashPartitionScheme:ERR] AppleNANDFTL initialization failed
[nand_part_core:ERR@ 429] no fbbt service available
[nand_part_core:BUG@3024] failed to create partition devices
unable to check is-bfn-partitioned property
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND failed to initialize: No additional error message.
==== end of device restore output ====
2014-02-24 14:13:32.384 [1192:f44]: AMRAuthInstallDeletePersonalizedBundle
2014-02-24 14:13:32.892 [1192:f44]: <Restore Device 06F59780>: Restore failed (result = 40)
2014-02-24 14:13:33.517 [1192:14d4]: iTunes: Restore error 40
2014-02-24 14:15:03.369 [1192:120]: Looking up device with muxID:1
2014-02-24 14:15:03.369 [1192:120]: Muxed device disconnected
2014-02-24 14:15:03.369 [1192:120]: RestoreOS mode device disconnected
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.916 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.955 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.993 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.165 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.188 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.211 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 1
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.230 [1192:1230]: Recovery mode device connected
2014-02-24 14:15:10.231 [1192:1230]: Found new device.
2014-02-24 14:15:10.241 [1192:14d4]: iTunes: SCEP 2

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Internal delivery chnl, file doesn't get picked up, no trace log file gener

Similar Messages

Maybe you are looking for