Internal disk power off
I wonder if anyone can offer any tips or advice?
Is it possible to boot an iMac off SSD and keep the internal hard disk powered down, I.e. not spinning?
My desk acts like an enormous sound board and I get a loud hum whenever I have a spinning hard disk on the desk.
FYI, I don't have the iMac yet, just considering my options. Yes I can buy one with internal SSD only, but you can only get these from the Apple Store and never discounted. I can get a good deal elsewhere on new iMacs, but none with internal SSD.
If I unmount the drive I think it will go to sleep after a while, but I think (not sure) it will mount itself and spin up on every reboot. Is there a way to keep it dismounted and powered off (without cracking the iMac open?
Thanks
phmayet (Philipp),
I am trying to do this on a 3.0.2 server.
It appears the minimum rpm's needed to make this work are:
hpsmh-6.3.1-23.x86_64.rpm <-- this one install the web portal and is successful, Port 2381 is opened but the SMH homepage is for the most part empty as there are no agents installed.
hp-health-8.5.0.23-23.rhel5.x86_64.rpm <-- this one is needed by hp-snmp-agents and won't install because of missing libraries (libc.so.6 and libpthread.so.0)
hp-snmp-agents-8.5.0.17-19.rhel5.x86_64.rpm <-- this one seems to be needed to configure hpasm and complains of many missing libraries and net-snmp
hpasm-8.0.0-173.rhel5.x86_64.rpm <- this one installs ok, but when you run hpasm activate it complains that hp-snmp is not there
With only hpsmh and hpasm installed I did not see much in the way of useful information.
I really am only curious about monitoring the RAM (we have had DIMM's fail in the past and SMH informed us), Power Supplies (these too have gone out and its nice to know one of the two redundant ones have failed), monitoring the HBA that will connect the shared storage to this server, and I would suppose the internal Disk/Raidset that OVM will be installed on. Since we are using all Shared Storage for the Guests the last one is not as vital.
Has anyone else attempted to make this work or know of a better way to monitor the hardware?
Similar Messages
-
I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?
Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2 -
Can you safely power off a 5th generation AirPort and an attached disk drive without losing data?
I'd like to just be able to shut it down by tripping off the power strip the disk and airport are attached to with my toe so they're not sucking down power at night or when I'm at work. I wouldn't mind a sequence of power down the computers on the net first and then 'toeing off' the AirPort+disk.
I'm just wondering how quickly between the time that I power off the mac that the airport would flush all of its buffers. -
my ipod touch makes a shutter sound ( no camera on this ipod ) and then goes to the power off slider screen. It will do this several times and then screen goes blank have restored several times with no change is it terminal or can it be repaired this was purchased as a refurb
If you press and hold the home button and click on the sleep button once, the iPod will make a screenshot of your home screen and add it to the photos on your device.
If you don't press the home button or the sleep button during to do this, one of your buttons might be stuck.
Try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again, ignore the "slide to turn off" message when you press and hold the buttons.
If this does not work, wet it up as new device:
How to back up your data and set up as a new device -
Protecting VMs against host power-offs
Every now and then and for numerous reasons, my Windows 8 desktop encounters a loss of power. I am running a Debian 6 virtual machine via HyperV and when I restore power, the VM kernel panics every single time. Rebooting the VM results in the disk being
set to read-only mode, and fixing it takes quite a long time. I have a number of snapshots from states such as these.
Is there a feature of HyperV that makes VMs more tolerant to sudden host power-offs? I could script something together to take periodic snapshots of my VMs and revert to those should I encounter a loss of power, but I wonder if there is something already
present in HyperV to facilitate such protection.
I have one of the simplest of simplest setups: Windows 8, HyperV with two VMs (Solaris and Debian), each with a single attached drive and network adaptor. I have no clustering setup nor do I use any HyperV integration (the Debian kernel module leads to more
kernel panics, and I don't have time to debug that at the moment).
Is there something already present, or should I just write a script to take periodic snapshots?
Edit: I now realize this is the Windows Server forums, yet my setup uses Windows 8. Is there a more appropriate forum for my post?Every now and then and for numerous reasons, my Windows 8 desktop encounters a loss of power. I am running a Debian 6 virtual machine via HyperV and when I restore power, the VM kernel panics every single time. Rebooting the VM results in the disk being
set to read-only mode, and fixing it takes quite a long time. I have a number of snapshots from states such as these.
Is there a feature of HyperV that makes VMs more tolerant to sudden host power-offs? I could script something together to take periodic snapshots of my VMs and revert to those should I encounter a loss of power, but I wonder if there is something already
present in HyperV to facilitate such protection.
I have one of the simplest of simplest setups: Windows 8, HyperV with two VMs (Solaris and Debian), each with a single attached drive and network adaptor. I have no clustering setup nor do I use any HyperV integration (the Debian kernel module leads to more
kernel panics, and I don't have time to debug that at the moment).
Is there something already present, or should I just write a script to take periodic snapshots?
Edit: I now realize this is the Windows Server forums, yet my setup uses Windows 8. Is there a more appropriate forum for my post?
The only reliable way to go would be:
1) having at least two individual hosts running server versions of Windows with Hyper-V role enabled (technically you can have ANY hypervisor but this is Windows forum)
2) configure guest VM cluster between VMs you have (yes, that would require some sort of a physical or virtual shared storage, typically...)
That would be very low RTO (virtually no downtime) and RPO (virtually no data loss). See:
Guest VM Cluster for HA
http://technet.microsoft.com/en-us/library/dn440540.aspx
Using some third-party software like VEEAM will get you reasonable RTO and RPO but no transparent failover. This one is not free but may work with a desktop version of Windows (never checked). Free Hyper-V is definitely supported. See:
VEEAM Backup & Replication
http://www.veeam.com/blog/rdp-rsat-free-hyper-v-server-2012-r2-remote-desktop-appliance-linux.html
Hyper-V Replica may also work (2012 R2 req'd). See:
Hyper-V Replica Explained
http://blogs.technet.com/b/yungchou/archive/2013/01/10/hyper-v-replica-explained.aspx?utm_source=feedburner
Hyper-V Replica Overview
http://technet.microsoft.com/en-us/library/jj134172.aspx
Good luck!
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
Can I spin down my internal disk? Open Firmware or terminal commands?
Hello all,
I have not been around here for a while, but I desperately need your help.
Does anyone know how I can spin down my internal disk?
Possibly with the terminal or Open Firmware?
Does anyone know all the Open Firmware commands or
where a list can be found so that I can explore the situation myself?
Here is some more detail of what I want to do and why.
My internal disk crashed a while ago.
(My bag slid off my shoulder and the machine hit the brick sidewalk below right on its' corner:>(
I have since been running off my little pocket-size fire-wire disk.
Today the internal disk finally really bit the dust and the bearings are making quite a noise.
(If I tip the PB while it is running the noise turns into a whine of varying pitch and loudness.
It sounds like my poor PB is crying in pain. LOL)
I want to get the internal disk to spin down until I can afford a new one and I have the time to replace it.
Any ideas?
I know I could open up the case and pull the plug on it,
but maybe there is something better and easier.
Can anyone guide me in any possible terminal commands to eject it or
give some insight into firmware commands that may help?
I know the firmware can spin the disk down. - It does so for power management.
Also, one time when I booted, the disk gave the boot process such a bad error that
the boot process asked me what to do. I told it to eject the disk - then the disk spun down
and the machine booted normally off the FW disk.
So, maybe there is an Open Firmware command I could use to permanently shut the thing off.
I cannot use the Disk Utility to unmount or eject it.
In Disk Utility, sometimes the disk is already unmounted and grayed out.
So therefor the unmount and eject commands are also greyed out.
At other times the disk does not even show up in Disk Utility.
Thanks, BobThanks for the fast response.
Although your suggestion did not do the trick, it jogged my old mind into
finding a solution that does work. Or seems to work for right now.
The 'drutil' is a command for CD-R/RW media, so it could not see or act on my internal hard drive.
Your suggestion to use a disk utility command sent me off to find a command for other devices and
I remembered the 'diskutil' command.
I did a 'diskutil list' and after a good wait for the failed disk to allow completion,
I was given a list that showed what device the internal disk was (/dev/disk2).
I then did a 'diskutil eject /dev/disk2' and after a similar wait, the disk was ejected and it spun down.
It was a pleasant surprise since the drive is not ejectable and since the OsX Disk Utility could not eject it.
There are things (running the disk utility) that do seem to wake up the disk occasionally,
but all I have to do is issue the command again.
Thanks
p.s. Perhaps I was not clear in my original question that
I wanted to spin down my internal ide hard disk - sorry if that was a confusion.
p.p.s. It is also very interesting that I called Apple support and
they could not give me this simple solution. -
[Solved] Random Freezes Requiring Manual Power off
Since I built this system, I've been getting random freezes that force me to have to manually power off and back on the entire system. I have no idea what's causing it and I've tried everything under the sun that I can think of to resolve it to no avail. I posted about this a while back in another forum, but I'm hoping I'll have better luck here.
Symptoms:
Entire system will completely freeze. No input is recognized, keyboard controls do not function (numlock, caps lock, etc.), cannot switch to another TTY, nothing. There appears to be no rhyme or reason to when the freezes occur. Sometimes the machine will be sitting idle and freeze in the middle of the night and I'll come in in the morning and find it frozen, other times I'll be in the middle of using it and it will freeze (as just happened). Every time I have to hold down the power button to shut off, then turn it back on.
What I've tried so far:
Swapping out all the RAM
Completely wiping the entire system and re-installing from the ground up (twice now I've done this)
Unplugging various USB devices and seeing if leaving those unplugged helps (it does not).
I'm at my wits end. This has been going on for months and I have no idea what to do at this point. This is the most stumped I've ever been.
The thing that drives me the most nuts is that I have an almost *identical* system at home (the one that's freezing is my work computer). Same CPU, same motherboard, same SSD partitions and layout, virtually the exact same software installed as well. The only differences are a different GPU, different band of RAM, different brand of SSD, and a different case. The specs from my home computer are in my signature and I can provide exact hardware info on the work system if anyone thinks it'll help.
I'm willing to provide whatever information anyone can suggest to help troubleshoot the issue. I've got a bunch of log output from journalctl from various times it's crashed, but I haven't been able to make sense of it with regards to finding patterns or useful troubleshooting information. Below is the most recent log from a few minutes before and after the crash. You'll see the reboot at 17:51:40
(sudo journalctl --since 17:45:00)
-- Logs begin at Mon 2015-04-06 13:26:57 EDT, end at Thu 2015-05-07 18:01:46 EDT. --
May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 10
May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.83" , with cookie 11 from "/usr/bin/google-chrome-stable" with "Playing Video"
May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
May 07 17:45:11 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:18 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:19 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:22 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:26 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:31 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:40 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 11
May 07 17:45:40 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
May 07 17:45:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:45 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:50 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.84" , with cookie 12 from "/usr/bin/google-chrome-stable" with "Playing Video"
May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 12
May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.85" , with cookie 13 from "/usr/bin/google-chrome-stable" with "Playing Video"
May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 13
May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.86" , with cookie 14 from "/usr/bin/google-chrome-stable" with "Playing Video"
May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
May 07 17:46:04 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:04 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:19 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:19 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 14
May 07 17:46:19 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
May 07 17:46:20 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:26 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:42 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:48 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:46:55 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:08 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:11 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:15 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:16 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:17 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:46 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:54 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:56 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:47:57 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:48:25 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:48:26 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:48:34 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:48:35 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:48:39 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.87" , with cookie 15 from "/usr/bin/google-chrome-stable" with "Playing Video"
May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
May 07 17:51:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
-- Reboot --
May 07 17:54:22 workArchPC systemd-journal[263]: Runtime journal is using 8.0M (max allowed 1.5G, trying to leave 2.3G free of 15.6G available → current limit 1.5G).
May 07 17:54:22 workArchPC systemd-journal[263]: Permanent journal is using 1.4G (max allowed 3.3G, trying to leave 4.0G free of 23.3G available → current limit 3.3G).
May 07 17:54:22 workArchPC systemd-journal[263]: Time spent on flushing to /var is 4.536ms for 2 entries.
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys cpuset
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys cpu
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys cpuacct
May 07 17:54:22 workArchPC kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
May 07 17:54:22 workArchPC kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c215d6d6-d557-43a8-9801-f632e7f25e33 rw quiet
May 07 17:54:22 workArchPC kernel: tseg: 00bd800000
May 07 17:54:22 workArchPC kernel: e820: BIOS-provided physical RAM map:
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000ba70afff] usable
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000ba70b000-0x00000000bab3efff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bab3f000-0x00000000bab4efff] ACPI data
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bab4f000-0x00000000bb956fff] ACPI NVS
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bb957000-0x00000000bca33fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd082fff] usable
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable
May 07 17:54:22 workArchPC kernel: NX (Execute Disable) protection: active
May 07 17:54:22 workArchPC kernel: SMBIOS 2.7 present.
May 07 17:54:22 workArchPC kernel: DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 2301 01/06/2014
May 07 17:54:22 workArchPC kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
May 07 17:54:22 workArchPC kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
May 07 17:54:22 workArchPC kernel: AGP: No AGP bridge found
May 07 17:54:22 workArchPC kernel: e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
May 07 17:54:22 workArchPC kernel: MTRR default type: uncachable
May 07 17:54:22 workArchPC kernel: MTRR fixed ranges enabled:
May 07 17:54:22 workArchPC kernel: 00000-9FFFF write-back
May 07 17:54:22 workArchPC kernel: A0000-BFFFF write-through
May 07 17:54:22 workArchPC kernel: C0000-CEFFF write-protect
May 07 17:54:22 workArchPC kernel: CF000-EBFFF uncachable
May 07 17:54:22 workArchPC kernel: EC000-FFFFF write-protect
May 07 17:54:22 workArchPC kernel: MTRR variable ranges enabled:
May 07 17:54:22 workArchPC kernel: 0 base 000000000000 mask FFFF80000000 write-back
May 07 17:54:22 workArchPC kernel: 1 base 000080000000 mask FFFFC0000000 write-back
May 07 17:54:22 workArchPC kernel: 2 base 0000BD800000 mask FFFFFF800000 uncachable
May 07 17:54:22 workArchPC kernel: 3 base 0000BE000000 mask FFFFFE000000 uncachable
May 07 17:54:22 workArchPC kernel: 4 disabled
May 07 17:54:22 workArchPC kernel: 5 disabled
May 07 17:54:22 workArchPC kernel: 6 disabled
May 07 17:54:22 workArchPC kernel: 7 disabled
May 07 17:54:22 workArchPC kernel: TOM2: 000000083f000000 aka 33776M
May 07 17:54:22 workArchPC kernel: PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
May 07 17:54:22 workArchPC kernel: e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
May 07 17:54:22 workArchPC kernel: e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
May 07 17:54:22 workArchPC kernel: Scanning 1 areas for low memory corruption
May 07 17:54:22 workArchPC kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
May 07 17:54:22 workArchPC kernel: Using GB pages for direct mapping
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
May 07 17:54:22 workArchPC kernel: [mem 0x00000000-0x000fffff] page 4k
May 07 17:54:22 workArchPC kernel: BRK [0x01b1b000, 0x01b1bfff] PGTABLE
May 07 17:54:22 workArchPC kernel: BRK [0x01b1c000, 0x01b1cfff] PGTABLE
May 07 17:54:22 workArchPC kernel: BRK [0x01b1d000, 0x01b1dfff] PGTABLE
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x83ee00000-0x83effffff]
May 07 17:54:22 workArchPC kernel: [mem 0x83ee00000-0x83effffff] page 2M
May 07 17:54:22 workArchPC kernel: BRK [0x01b1e000, 0x01b1efff] PGTABLE
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x820000000-0x83edfffff]
May 07 17:54:22 workArchPC kernel: [mem 0x820000000-0x83edfffff] page 2M
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x800000000-0x81fffffff]
May 07 17:54:22 workArchPC kernel: [mem 0x800000000-0x81fffffff] page 2M
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x00100000-0xba70afff]
May 07 17:54:22 workArchPC kernel: [mem 0x00100000-0x001fffff] page 4k
May 07 17:54:22 workArchPC kernel: [mem 0x00200000-0x3fffffff] page 2M
May 07 17:54:22 workArchPC kernel: [mem 0x40000000-0x7fffffff] page 1G
May 07 17:54:22 workArchPC kernel: [mem 0x80000000-0xba5fffff] page 2M
May 07 17:54:22 workArchPC kernel: [mem 0xba600000-0xba70afff] page 4k
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0xbca34000-0xbca34fff]
May 07 17:54:22 workArchPC kernel: [mem 0xbca34000-0xbca34fff] page 4k
May 07 17:54:22 workArchPC kernel: BRK [0x01b1f000, 0x01b1ffff] PGTABLE
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0xbcc3b000-0xbd082fff]
May 07 17:54:22 workArchPC kernel: [mem 0xbcc3b000-0xbcdfffff] page 4k
May 07 17:54:22 workArchPC kernel: [mem 0xbce00000-0xbcffffff] page 2M
May 07 17:54:22 workArchPC kernel: [mem 0xbd000000-0xbd082fff] page 4k
May 07 17:54:22 workArchPC kernel: BRK [0x01b20000, 0x01b20fff] PGTABLE
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0xbd7f4000-0xbd7fffff]
May 07 17:54:22 workArchPC kernel: [mem 0xbd7f4000-0xbd7fffff] page 4k
May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x100001000-0x7ffffffff]
May 07 17:54:22 workArchPC kernel: [mem 0x100001000-0x1001fffff] page 4k
May 07 17:54:22 workArchPC kernel: [mem 0x100200000-0x13fffffff] page 2M
May 07 17:54:22 workArchPC kernel: [mem 0x140000000-0x7ffffffff] page 1G
May 07 17:54:22 workArchPC kernel: RAMDISK: [mem 0x36e78000-0x37733fff]
May 07 17:54:22 workArchPC kernel: ACPI: Early table checksum verification disabled
May 07 17:54:22 workArchPC kernel: ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
May 07 17:54:22 workArchPC kernel: ACPI: XSDT 0x00000000BAB47070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
May 07 17:54:22 workArchPC kernel: ACPI: FACP 0x00000000BAB4E110 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
May 07 17:54:22 workArchPC kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150204/tbfadt-649)
May 07 17:54:22 workArchPC kernel: ACPI: DSDT 0x00000000BAB47168 006FA8 (v02 ALASKA A M I 00000000 INTL 20051117)
May 07 17:54:22 workArchPC kernel: ACPI: FACS 0x00000000BB951F80 000040
May 07 17:54:22 workArchPC kernel: ACPI: APIC 0x00000000BAB4E220 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
May 07 17:54:22 workArchPC kernel: ACPI: FPDT 0x00000000BAB4E2C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
May 07 17:54:22 workArchPC kernel: ACPI: MCFG 0x00000000BAB4E308 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
May 07 17:54:22 workArchPC kernel: ACPI: HPET 0x00000000BAB4E348 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
May 07 17:54:22 workArchPC kernel: ACPI: IVRS 0x00000000BAB4E6E0 0000F8 (v01 AMD RD890S 00202031 AMD 00000000)
May 07 17:54:22 workArchPC kernel: ACPI: SSDT 0x00000000BAB4E3D8 000304 (v01 AMD POWERNOW 00000001 AMD 00000001)
May 07 17:54:22 workArchPC kernel: ACPI: Local APIC address 0xfee00000
May 07 17:54:22 workArchPC kernel: No NUMA configuration found
May 07 17:54:22 workArchPC kernel: Faking a node at [mem 0x0000000000000000-0x000000083effffff]
May 07 17:54:22 workArchPC kernel: NODE_DATA(0) allocated [mem 0x83eff6000-0x83eff9fff]
May 07 17:54:22 workArchPC kernel: [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0
May 07 17:54:22 workArchPC kernel: Zone ranges:
May 07 17:54:22 workArchPC kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
May 07 17:54:22 workArchPC kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
May 07 17:54:22 workArchPC kernel: Normal [mem 0x0000000100000000-0x000000083effffff]
May 07 17:54:22 workArchPC kernel: Movable zone start for each node
May 07 17:54:22 workArchPC kernel: Early memory node ranges
May 07 17:54:22 workArchPC kernel: node 0: [mem 0x0000000000001000-0x000000000009dfff]
May 07 17:54:22 workArchPC kernel: node 0: [mem 0x0000000000100000-0x00000000ba70afff]
May 07 17:54:22 workArchPC kernel: node 0: [mem 0x00000000bca34000-0x00000000bca34fff]
May 07 17:54:22 workArchPC kernel: node 0: [mem 0x00000000bcc3b000-0x00000000bd082fff]
May 07 17:54:22 workArchPC kernel: node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
May 07 17:54:22 workArchPC kernel: node 0: [mem 0x0000000100001000-0x000000083effffff]
May 07 17:54:22 workArchPC kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff]
May 07 17:54:22 workArchPC kernel: On node 0 totalpages: 8362748
May 07 17:54:22 workArchPC kernel: DMA zone: 64 pages used for memmap
May 07 17:54:22 workArchPC kernel: DMA zone: 21 pages reserved
May 07 17:54:22 workArchPC kernel: DMA zone: 3997 pages, LIFO batch:0
May 07 17:54:22 workArchPC kernel: DMA32 zone: 11886 pages used for memmap
May 07 17:54:22 workArchPC kernel: DMA32 zone: 760672 pages, LIFO batch:31
May 07 17:54:22 workArchPC kernel: Normal zone: 118720 pages used for memmap
May 07 17:54:22 workArchPC kernel: Normal zone: 7598079 pages, LIFO batch:31
May 07 17:54:22 workArchPC kernel: ACPI: PM-Timer IO Port: 0x808
May 07 17:54:22 workArchPC kernel: ACPI: Local APIC address 0xfee00000
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
May 07 17:54:22 workArchPC kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
May 07 17:54:22 workArchPC kernel: ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
May 07 17:54:22 workArchPC kernel: IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
May 07 17:54:22 workArchPC kernel: ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
May 07 17:54:22 workArchPC kernel: IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
May 07 17:54:22 workArchPC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 07 17:54:22 workArchPC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
May 07 17:54:22 workArchPC kernel: ACPI: IRQ0 used by override.
May 07 17:54:22 workArchPC kernel: ACPI: IRQ9 used by override.
May 07 17:54:22 workArchPC kernel: Using ACPI (MADT) for SMP configuration information
May 07 17:54:22 workArchPC kernel: ACPI: HPET id: 0x43538210 base: 0xfed00000
May 07 17:54:22 workArchPC kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xba70b000-0xbab3efff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbab3f000-0xbab4efff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbab4f000-0xbb956fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbb957000-0xbca33fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
May 07 17:54:22 workArchPC kernel: e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
May 07 17:54:22 workArchPC kernel: Booting paravirtualized kernel on bare hardware
May 07 17:54:22 workArchPC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
May 07 17:54:22 workArchPC kernel: PERCPU: Embedded 31 pages/cpu @ffff88083ec00000 s86168 r8192 d32616 u262144
May 07 17:54:22 workArchPC kernel: pcpu-alloc: s86168 r8192 d32616 u262144 alloc=1*2097152
May 07 17:54:22 workArchPC kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
May 07 17:54:22 workArchPC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 8232057
May 07 17:54:22 workArchPC kernel: Policy zone: Normal
May 07 17:54:22 workArchPC kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c215d6d6-d557-43a8-9801-f632e7f25e33 rw quiet
May 07 17:54:22 workArchPC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
May 07 17:54:22 workArchPC kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
May 07 17:54:22 workArchPC kernel: AGP: Checking aperture...
May 07 17:54:22 workArchPC kernel: AGP: No AGP bridge found
May 07 17:54:22 workArchPC kernel: AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
May 07 17:54:22 workArchPC kernel: Memory: 32838936K/33450992K available (5601K kernel code, 835K rwdata, 1776K rodata, 1160K init, 1152K bss, 612056K reserved, 0K cma-reserved)
May 07 17:54:22 workArchPC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
May 07 17:54:22 workArchPC kernel: Preemptible hierarchical RCU implementation.
May 07 17:54:22 workArchPC kernel: RCU dyntick-idle grace-period acceleration is enabled.
May 07 17:54:22 workArchPC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
May 07 17:54:22 workArchPC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
May 07 17:54:22 workArchPC kernel: NR_IRQS:8448 nr_irqs:1032 16
May 07 17:54:22 workArchPC kernel: spurious 8259A interrupt: IRQ7.
May 07 17:54:22 workArchPC kernel: Console: colour dummy device 80x25
May 07 17:54:22 workArchPC kernel: console [tty0] enabled
May 07 17:54:22 workArchPC kernel: hpet clockevent registered
May 07 17:54:22 workArchPC kernel: tsc: Fast TSC calibration failed
May 07 17:54:22 workArchPC kernel: tsc: Unable to calibrate against PIT
May 07 17:54:22 workArchPC kernel: tsc: using HPET reference calibration
May 07 17:54:22 workArchPC kernel: tsc: Detected 4715.820 MHz processor
May 07 17:54:22 workArchPC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 9435.62 BogoMIPS (lpj=15719400)
May 07 17:54:22 workArchPC kernel: pid_max: default: 32768 minimum: 301
May 07 17:54:22 workArchPC kernel: ACPI: Core revision 20150204
May 07 17:54:22 workArchPC kernel: ACPI: All ACPI Tables successfully acquired
May 07 17:54:22 workArchPC kernel: Security Framework initialized
May 07 17:54:22 workArchPC kernel: Yama: becoming mindful.
May 07 17:54:22 workArchPC kernel: Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
May 07 17:54:22 workArchPC kernel: Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
May 07 17:54:22 workArchPC kernel: Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
May 07 17:54:22 workArchPC kernel: Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys blkio
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys memory
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys devices
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys freezer
May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys net_cls
May 07 17:54:22 workArchPC kernel: CPU: Physical Processor ID: 0
May 07 17:54:22 workArchPC kernel: CPU: Processor Core ID: 0
May 07 17:54:22 workArchPC kernel: mce: CPU supports 7 MCE banks
May 07 17:54:22 workArchPC kernel: LVT offset 1 assigned for vector 0xf9
May 07 17:54:22 workArchPC kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
May 07 17:54:22 workArchPC kernel: Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
May 07 17:54:22 workArchPC kernel: Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
May 07 17:54:22 workArchPC kernel: ftrace: allocating 21221 entries in 83 pages
May 07 17:54:22 workArchPC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
May 07 17:54:22 workArchPC kernel: smpboot: CPU0: AMD FX(tm)-9590 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
May 07 17:54:22 workArchPC kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
May 07 17:54:22 workArchPC kernel: ... version: 0
May 07 17:54:22 workArchPC kernel: ... bit width: 48
May 07 17:54:22 workArchPC kernel: ... generic registers: 6
May 07 17:54:22 workArchPC kernel: ... value mask: 0000ffffffffffff
May 07 17:54:22 workArchPC kernel: ... max period: 00007fffffffffff
May 07 17:54:22 workArchPC kernel: ... fixed-purpose events: 0
May 07 17:54:22 workArchPC kernel: ... event mask: 000000000000003f
May 07 17:54:22 workArchPC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
May 07 17:54:22 workArchPC kernel: x86: Booting SMP configuration:
May 07 17:54:22 workArchPC kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
May 07 17:54:22 workArchPC kernel: x86: Booted up 1 node, 8 CPUs
May 07 17:54:22 workArchPC kernel: smpboot: Total of 8 processors activated (75483.00 BogoMIPS)
May 07 17:54:22 workArchPC kernel: devtmpfs: initialized
May 07 17:54:22 workArchPC kernel: PM: Registering ACPI NVS region [mem 0xbab4f000-0xbb956fff] (14712832 bytes)
May 07 17:54:22 workArchPC kernel: PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
May 07 17:54:22 workArchPC kernel: pinctrl core: initialized pinctrl subsystem
May 07 17:54:22 workArchPC kernel: RTC time: 21:54:19, date: 05/07/15
May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 16
May 07 17:54:22 workArchPC kernel: cpuidle: using governor ladder
May 07 17:54:22 workArchPC kernel: cpuidle: using governor menu
May 07 17:54:22 workArchPC kernel: ACPI: bus type PCI registered
May 07 17:54:22 workArchPC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 07 17:54:22 workArchPC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
May 07 17:54:22 workArchPC kernel: PCI: not using MMCONFIG
May 07 17:54:22 workArchPC kernel: PCI: Using configuration type 1 for base access
May 07 17:54:22 workArchPC kernel: PCI: Using configuration type 1 for extended access
May 07 17:54:22 workArchPC kernel: mtrr: your CPUs had inconsistent variable MTRR settings
May 07 17:54:22 workArchPC kernel: mtrr: probably your BIOS does not setup all CPUs.
May 07 17:54:22 workArchPC kernel: mtrr: corrected configuration.
May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(Module Device)
May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(Processor Device)
May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(Processor Aggregator Device)
May 07 17:54:22 workArchPC kernel: ACPI: Executed 2 blocks of module-level executable AML code
May 07 17:54:22 workArchPC kernel: ACPI: Interpreter enabled
May 07 17:54:22 workArchPC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
May 07 17:54:22 workArchPC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
May 07 17:54:22 workArchPC kernel: ACPI: (supports S0 S3 S4 S5)
May 07 17:54:22 workArchPC kernel: ACPI: Using IOAPIC for interrupt routing
May 07 17:54:22 workArchPC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
May 07 17:54:22 workArchPC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
May 07 17:54:22 workArchPC kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 07 17:54:22 workArchPC kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
May 07 17:54:22 workArchPC kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
May 07 17:54:22 workArchPC kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
May 07 17:54:22 workArchPC kernel: PCI host bridge to bus 0000:00
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
May 07 17:54:22 workArchPC kernel: pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.0: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: System wakeup disabled by ACPI
May 07 17:54:22 workArchPC kernel: pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: [10de:1381] type 00 class 0x030000
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x24: [mem 0xfe500000-0xfe5001ff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x10: [io 0xc050-0xc057]
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x14: [io 0xc040-0xc043]
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x18: [io 0xc030-0xc037]
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x1c: [io 0xc020-0xc023]
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x20: [io 0xc000-0xc01f]
May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x24: [mem 0xfe400000-0xfe4001ff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: PCI bridge to [bus 03]
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
May 07 17:54:22 workArchPC kernel: pci 0000:04:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
May 07 17:54:22 workArchPC kernel: pci 0000:04:00.0: PME# supported from D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: PCI bridge to [bus 04]
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: PCI bridge to [bus 05]
May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: PCI bridge to [bus 06]
May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: PCI bridge to [bus 07]
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: PCI bridge to [bus 09]
May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: reg 0x10: [io 0xb000-0xb0ff]
May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: supports D1 D2
May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: PCI bridge to [bus 0a]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:0b:00.0: [1b21:1142] type 00 class 0x0c0330
May 07 17:54:22 workArchPC kernel: pci 0000:0b:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
May 07 17:54:22 workArchPC kernel: pci 0000:0b:00.0: PME# supported from D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: PCI bridge to [bus 0b]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:0c:00.0: [1b21:1142] type 00 class 0x0c0330
May 07 17:54:22 workArchPC kernel: pci 0000:0c:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
May 07 17:54:22 workArchPC kernel: pci 0000:0c:00.0: PME# supported from D3cold
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: PCI bridge to [bus 0c]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: on NUMA node 0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
May 07 17:54:22 workArchPC kernel: ACPI: Enabled 1 GPEs in block 00 to 1F
May 07 17:54:22 workArchPC kernel: ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
May 07 17:54:22 workArchPC kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
May 07 17:54:22 workArchPC kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
May 07 17:54:22 workArchPC kernel: vgaarb: loaded
May 07 17:54:22 workArchPC kernel: vgaarb: bridge control possible 0000:01:00.0
May 07 17:54:22 workArchPC kernel: PCI: Using ACPI for IRQ routing
May 07 17:54:22 workArchPC kernel: PCI: pci_cache_line_size set to 64 bytes
May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xba70b000-0xbbffffff]
May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff]
May 07 17:54:22 workArchPC kernel: NetLabel: Initializing
May 07 17:54:22 workArchPC kernel: NetLabel: domain hash size = 128
May 07 17:54:22 workArchPC kernel: NetLabel: protocols = UNLABELED CIPSOv4
May 07 17:54:22 workArchPC kernel: NetLabel: unlabeled traffic allowed by default
May 07 17:54:22 workArchPC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
May 07 17:54:22 workArchPC kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
May 07 17:54:22 workArchPC kernel: Switched to clocksource hpet
May 07 17:54:22 workArchPC kernel: pnp: PnP ACPI init
May 07 17:54:22 workArchPC kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x040b] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x04d6] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c00-0x0c01] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c14] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c50-0x0c51] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c52] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c6c] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c6f] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd0-0x0cd1] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd2-0x0cd3] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd4-0x0cd5] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd6-0x0cd7] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd8-0x0cdf] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0800-0x089f] could not be reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0b20-0x0b3f] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0900-0x090f] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0910-0x091f] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [io 0xfe00-0xfefe] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xff800000-0xffffffff] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
May 07 17:54:22 workArchPC kernel: system 00:02: [io 0x0290-0x02af] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
May 07 17:54:22 workArchPC kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
May 07 17:54:22 workArchPC kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved
May 07 17:54:22 workArchPC kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
May 07 17:54:22 workArchPC kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
May 07 17:54:22 workArchPC kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
May 07 17:54:22 workArchPC kernel: pnp 00:07: [dma 0 disabled]
May 07 17:54:22 workArchPC kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
May 07 17:54:22 workArchPC kernel: system 00:08: [mem 0xfeb20000-0xfeb23fff] could not be reserved
May 07 17:54:22 workArchPC kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
May 07 17:54:22 workArchPC kernel: system 00:09: [mem 0xfec20000-0xfec200ff] could not be reserved
May 07 17:54:22 workArchPC kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
May 07 17:54:22 workArchPC kernel: pnp: PnP ACPI: found 10 devices
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: PCI bridge to [bus 03]
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: PCI bridge to [bus 04]
May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: PCI bridge to [bus 05]
May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: PCI bridge to [bus 06]
May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: PCI bridge to [bus 07]
May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: PCI bridge to [bus 08]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: PCI bridge to [bus 09]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: PCI bridge to [bus 0a]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: PCI bridge to [bus 0b]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: PCI bridge to [bus 0c]
May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 10 [mem 0xc0000000-0xffffffff window]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:0a: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:0b: resource 1 [mem 0xfe200000-0xfe2fffff]
May 07 17:54:22 workArchPC kernel: pci_bus 0000:0c: resource 1 [mem 0xfe100000-0xfe1fffff]
May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 2
May 07 17:54:22 workArchPC kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
May 07 17:54:22 workArchPC kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
May 07 17:54:22 workArchPC kernel: TCP: Hash tables configured (established 262144 bind 65536)
May 07 17:54:22 workArchPC kernel: TCP: reno registered
May 07 17:54:22 workArchPC kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes)
May 07 17:54:22 workArchPC kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 1
May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: Video device with shadowed ROM
May 07 17:54:22 workArchPC kernel: PCI: CLS 64 bytes, default 64
May 07 17:54:22 workArchPC kernel: Unpacking initramfs...
May 07 17:54:22 workArchPC kernel: Freeing initrd memory: 8944K (ffff880036e78000 - ffff880037734000)
May 07 17:54:22 workArchPC kernel: AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
May 07 17:54:22 workArchPC kernel: AMD-Vi: Interrupt remapping enabled
May 07 17:54:22 workArchPC kernel: AMD-Vi: Lazy IO/TLB flushing enabled
May 07 17:54:22 workArchPC kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
May 07 17:54:22 workArchPC kernel: software IO TLB [mem 0xb670b000-0xba70b000] (64MB) mapped at [ffff8800b670b000-ffff8800ba70afff]
May 07 17:54:22 workArchPC kernel: perf: AMD NB counters detected
May 07 17:54:22 workArchPC kernel: microcode: CPU0: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU1: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU2: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU3: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU4: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU5: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU6: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: CPU7: patch_level=0x06000822
May 07 17:54:22 workArchPC kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
May 07 17:54:22 workArchPC kernel: LVT offset 0 assigned for vector 0x400
May 07 17:54:22 workArchPC kernel: perf: AMD IBS detected (0x000000ff)
May 07 17:54:22 workArchPC kernel: Scanning for low memory corruption every 60 seconds
May 07 17:54:22 workArchPC kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
May 07 17:54:22 workArchPC kernel: Initialise system trusted keyring
May 07 17:54:22 workArchPC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
May 07 17:54:22 workArchPC kernel: zpool: loaded
May 07 17:54:22 workArchPC kernel: zbud: loaded
May 07 17:54:22 workArchPC kernel: VFS: Disk quotas dquot_6.5.2
May 07 17:54:22 workArchPC kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May 07 17:54:22 workArchPC kernel: Key type big_key registered
May 07 17:54:22 workArchPC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
May 07 17:54:22 workArchPC kernel: io scheduler noop registered
May 07 17:54:22 workArchPC kernel: io scheduler deadline registered
May 07 17:54:22 workArchPC kernel: io scheduler cfq registered (default)
May 07 17:54:22 workArchPC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 07 17:54:22 workArchPC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May 07 17:54:22 workArchPC kernel: vesafb: mode is 1920x1080x32, linelength=7680, pages=0
May 07 17:54:22 workArchPC kernel: vesafb: scrolling: redraw
May 07 17:54:22 workArchPC kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
May 07 17:54:22 workArchPC kernel: vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90013600000, using 8128k, total 8128k
May 07 17:54:22 workArchPC kernel: Console: switching to colour frame buffer device 240x67
May 07 17:54:22 workArchPC kernel: fb0: VESA VGA frame buffer device
May 07 17:54:22 workArchPC kernel: GHES: HEST is not enabled!
May 07 17:54:22 workArchPC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
May 07 17:54:22 workArchPC kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
May 07 17:54:22 workArchPC kernel: Linux agpgart interface v0.103
May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: RTC can wake from S4
May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
May 07 17:54:22 workArchPC kernel: ledtrig-cpu: registered to indicate activity on CPUs
May 07 17:54:22 workArchPC kernel: TCP: cubic registered
May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 10
May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 17
May 07 17:54:22 workArchPC kernel: Loading compiled-in X.509 certificates
May 07 17:54:22 workArchPC kernel: registered taskstats version 1
May 07 17:54:22 workArchPC kernel: Magic number: 15:637:954
May 07 17:54:22 workArchPC kernel: memory memory7: hash matches
May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: setting system clock to 2015-05-07 21:54:20 UTC (1431035660)
May 07 17:54:22 workArchPC kernel: PM: Hibernation image not present or could not be loaded.
May 07 17:54:22 workArchPC kernel: Freeing unused kernel memory: 1160K (ffffffff818d2000 - ffffffff819f4000)
May 07 17:54:22 workArchPC kernel: Write protecting the kernel read-only data: 8192k
May 07 17:54:22 workArchPC kernel: Freeing unused kernel memory: 532K (ffff88000157b000 - ffff880001600000)
May 07 17:54:22 workArchPC kernel: Freeing unused kernel memory: 272K (ffff8800017bc000 - ffff880001800000)
May 07 17:54:22 workArchPC kernel: random: systemd-tmpfile urandom read with 1 bits of entropy available
May 07 17:54:22 workArchPC kernel: device-mapper: uevent: version 1.0.3
May 07 17:54:22 workArchPC kernel: device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
May 07 17:54:22 workArchPC kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
May 07 17:54:22 workArchPC kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 07 17:54:22 workArchPC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 07 17:54:22 workArchPC kernel: SCSI subsystem initialized
May 07 17:54:22 workArchPC kernel: ACPI: bus type USB registered
May 07 17:54:22 workArchPC kernel: usbcore: registered new interface driver usbfs
May 07 17:54:22 workArchPC kernel: usbcore: registered new interface driver hub
May 07 17:54:22 workArchPC kernel: usbcore: registered new device driver usb
May 07 17:54:22 workArchPC kernel: libata version 3.00 loaded.
May 07 17:54:22 workArchPC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 07 17:54:22 workArchPC kernel: QUIRK: Enable AMD PLL fix
May 07 17:54:22 workArchPC kernel: xhci_hcd 0000:04:00.0: xHCI Host Controller
May 07 17:54:22 workArchPC kernel: xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
May 07 17:54:22 workArchPC kernel: ehci-pci: EHCI PCI platform driver
May 07 17:54:22 workArchPC kernel: ohci_hcd: USBMy thinking is that Plasma is not "playing" nicely with nvidia, I have two systems in my pc, one with kde4 and the other one (my testing system) with plasma, kde4 runs as it should, no lags, no freezes, no redrawing problems, fast and smooth. My plasma system is really not there, I tweak both systems the same, 20-nvidia.config on the xorg.d folder created by the nvidia settings, same where I also tweak all settings to juice my video card to its fullest (a really weak one by the way, a fanless gt430) and the triple buffering enabled for kde. I do have freezes with Plasma that lock the whole system, no keyboard input, and its been more or less the same since its release (for me that is), I am keep waiting to see if the "next" release would do, 5.3 still not yet. I also notice that compositing effects makes things worst, for example, snapping a window to a corner or to maximize when wobbly effect is on is a sure shot for a freeze for my system, I just update today the linux kernel and the nvidia driver, would see if that helps a little. My advice, for a stable system stick to kde4 still.
Edit: Note, I have a good old amd phenom 6 cores and I always run it with some over-clocking, never have issues with that on my previous install or my main system.
Last edited by RJQ (2015-05-08 15:43:16) -
Unable to reload os or Run Disk utility off osx dvd
Late 2007 Macbook Pro ( 2.53 , 4gb Ram, 320 GB hd) Will Load into osx but has the grey status bar at every boot ( Approximate 10 Mins for full boot) Ran disk utility in osx found issues and says run off DVD to repair the disk. Ran disk utility off the original DVD that came with the mac, wont find the hard drive to run disk utility. try to reinstall the OS. The installer wont find the hard drive? any idea how to resolve the issue so I can re install the OS to remove the grey status bar.
CentCorey wrote:
I can make a partition on the HD.
You'll have to decide which works best for you:
-boot from install disc, partition the external HD, install OS X on it, boot from it and see if HD shows up there so you can try to repair it (make sure you don't wipe out your TM data; your internal HD may not be reliable).
-get DiskWarrior or TechTool Pro or another disk repair utility and see what it can repair (note that these are more expensive than a new HD, but can come in handy to have around).
-get one of the SMART utilities that supposedly tell you more about your HD (I'm not a fan of either of the ones I've seen/tried and am far from confident in their results).
-get a new HD and try restoring from your TM backup.
-get an external enclosure (15 bucks or so for a USB model from newegg, amazon, macsales and others). -
This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?
Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Garage Band '11: pop-up error forces me to power off-on. Message states that info will be sent to Apple.
I never hear back from anyone about this.
Second prob: Fan sometimes comes on, runs high speed, then slowly runs down and stops running.First thing to do is a SMC Reset, you can find instructions at:
http://support.apple.com/kb/HT3964
READ THE INSTRUCTIONS CAREFULLY!!!!
Then try Repairing Disk Permissions, do this at least 2x. You will find this in Disk Utility which is located in Applications - Utilities - Disk Utility.
Finally you may need to uninstall Garage Band and reinstall. You may have to use Pacifist to do this, you can find it at:
http://www.macupdate.com/app/mac/6812/pacifist -
IPod screen illuminates but no image; iPod won't power off
iPod hard drive whirrs and screen illuminates, but no image (text or other) appears. iPod won't power off. iPod is recognized by iTunes only when in disk mode. Multiple restores were useless in restoring the screen function. Tools such as Disk Utility and Disk Warrior verified the directories were satisfactory. Can't locate a hardware diagnostic tool that can diagnose an iPod; and because the screen is malfunctioning, I can't run the iPod's built-in diagnostic routines.
Any solutions, or is this iPod destined for the repair shop?If your iPod will not power off, unplug it from any power supply and wait for it to run the battery down completely. Then it will power off simply because there is not enough power to keep it running. (It may take 24 hours to do this.) Once this has happened, plug the iPod back into your computer. After about 30 minutes, you should see the "Please wait, very low battery" message. After a while longer, the iPod will have enough power and should reset itself. If not, re-post, but see below.
At the bottom of your post you state that you have a 30GB video iPod. In that case, if you need to re-post, it would be better in the 5th generation iPod forum, (either 5th generation or 5th gen late - see http://support.apple.com/kb/HT1353 for more information) as there will be posts from owners of the same model as you have, and with the same problems. -
Screen illuminates but no image/menus; iPod won't power off or restore
iPod hard drive whirrs and screen illuminates, but no image (text or other) appears. iPod won't power off. iPod is recognized by iTunes only when in disk mode. Multiple restores were useless in restoring the screen function. Tools such as Disk Utility and Disk Warrior verified the directories were satisfactory. Can't locate a hardware diagnostic tool that can diagnose an iPod; and because the screen is malfunctioning, I can't run the iPod's built-in diagnostic routines.
Any solutions, or is this iPod destined for the repair shop?If your iPod will not power off, unplug it from any power supply and wait for it to run the battery down completely. Then it will power off simply because there is not enough power to keep it running. (It may take 24 hours to do this.) Once this has happened, plug the iPod back into your computer. After about 30 minutes, you should see the "Please wait, very low battery" message. After a while longer, the iPod will have enough power and should reset itself. If not, re-post, but see below.
At the bottom of your post you state that you have a 30GB video iPod. In that case, if you need to re-post, it would be better in the 5th generation iPod forum, (either 5th generation or 5th gen late - see http://support.apple.com/kb/HT1353 for more information) as there will be posts from owners of the same model as you have, and with the same problems. -
Hi,
I have a Mac Mini set up to use the "Safe Sleep" mode.
When I switch the machine to sleep, the screen turns blank and I have no idea when I can actually turn the power off.
For example, I have waited until the the tiny LED starts to slowly blink but that does not leave enough time for the system to commit the memory image to disk.
What do I do? Count to 20 and hope for the best?
Thanks in advance.
(Why do I need to switch the power off, you ask? Does it matter? The system's connected to a UPS and I rather leave that off since it is not used that often.)Thank you for your answer.
I understand the difference between "shut down" and "sleep" (deep, safe or simple).
I wish to turn the power off whilst maintaining the system's state and this can be done but switching the system to to safe sleep.
My only issue is knowing when the system has entered safe sleep completly (and the memory image is fully committed to disk).
I would prefer not to shutdown. I am aware of the new "auto save" and "restore" features in Lion but I need to keep the machine state unchanged. Safe sleep works.
When is it safe to power off after entering "safe sleep"? Please? -
how do i correct an internal disk error.
disc utility does not seem to see the disc in my time capsuleThat is correct.. disk utility cannot see a network drive.
And a disk error is serious .. but it can be false.
How old is the TC? A1xxx from the base can help.
What is the error?
Older TC the disk could be dead.. or lost format.
If the TC is under warranty or applecare, return it for warranty replacement.
If you are out of warranty.. you can open the TC remove the disk and either replace it with a new hard disk or sometimes repair it.. particularly the later Green WD from Gen4.. they just up and lose format occasionally. It can be recovered with a tool like disk warrior or data rescue 3. The disk can also just be reformatted.
First step give the info requested.. and leave the TC off for several hours and see if the error was false alarm. A restart from cold and the problem can go away.. occasionally. -
My ipad stops after a few seconds, says slide to power off/cancel. What is the problem?
What could be wrong with my ipad? it stops after a few seconds with "slide to power off" noted.
Settings are OK, but the internal power supply is on the verge of failure. Soon, you will not be able to turn the Time Capsule on at all after it turns off.
Take the Time Capsule to an Apple Store....if you have one near you....to discuss your options.
Otherwise, contact Apple Support.
http://support.apple.com/kb/HE57
Maybe you are looking for
-
I have several phones on my itunes accousnt how can i manage to see only my information
I have both my daughter and my sons iphone onmy itunes account. How can I manage my storage to seeonly my apps and my music?
-
I am looking for an app to track something I do periodically easily. For example, there is a medication I take sometimes and I would like to go to a calendar type page and click on the date and have it record that I took that medication on that date.
-
Error when executing dbms_job.submit
I work with ORACLE server 8.1.7 and I have executed the subprogram SUBMIT of the package dbms_job under an account which has not the DBA privilege . I have already defined a bind variable of type number in SQL*Plus, and there is a simple stored proce
-
This is truly devastating. Please help! Where did all my stuff go? Is it reparable?
-
How to set special payment advise form for payment advise.
Hello, i would like to set special sap script form payment advise for particular payment method (not only for company code) but print program calls every time only one payment advise form from tcode OBZ1 - table T042B (not from OBZ4 - table T042E).