Internal drive B missing after install of 10.4.4

I am building a test server with the latest dev seed of 10.4.4. The machine has drives in the two internal slots.
The 10.4.4 installation terminated normally without problems. Machine boots, is recognized on the network. Prior to this the machine was running OS 10.3.9 client, and the internal drive B was installed and configured under the client OS. DriveB has lots of stuff nicely organized. I prefer not to restore from the backups if possible.
After installation of the 10.4.4 Server, the internal drive B is not recognized by the Finder. Disk Utility sees the device but the volume icon is "document" not "disk". From the terminal df lists a mount point for the drive. Disk Warrior can find the device, build an alternate directory but cannot display the results.
The ownership and permissions for the mount point in Volumes looks odd to me.
ls -al Volumes
drwxrwxr-t root admin ..
lrwxr-xr-x root admin driveA
drwxr------ 503 503 driveB
I expected to find "drwxrwxr-t" and "root:admin" for driveB, as it is with another server running 10.3.9 Server.
I am tempted to change ownership and permissions, but thought it wise to see what others thought before I leap into it.
All replies greatly appreciated.
TIA,
- Mophilly
Dual G5 2ghz Mac OS X (10.4.4)
Dual G5 Mac OS X (10.3.9)
Dual G5 Mac OS X (10.3.9)

Just in case someone reads this thread with a similar question, I have learned a few things I can share:
503 is a user id from the previous OS installation. Since the user does not exist on the new system, the files are not available to the users so far defined.
I was able to "cd" to the drive directories and move the data off the drive, when logged on as root. So the decision became 1) add users until one has a UID of 503, or 2) change the owner and group assignments on the files. I chose the latter, and all seems well.
Since I had a backup of the data, I did have a third choice of simply reformatting the drive and restoring from backup. However, the learning experience was worth the effort.

Similar Messages

HT4477 One complete family file missing after installing iPhoto 11 ??

One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in that photo list that were downloaded 2 months prior to installing iPhoto 11. I keep files of each family branch on left side iPhoto window. Only the one file is missing. ????

I meant folder. Have 6 kids, and to keep track of each family quickly, I set up folders on left side of iPhoto. All others are there.

Libm.so.1 and other libraries, missing after install

I'm running into problems because libm.so.1 and some other libraries are missing after install.
- Solaris 8
- Not an LD_LIBRARY_PATH issue, I did a full FIND and it did not show up.
Any information as to why these libraries may have gone missing and what I might do to get around this problem would be appreciated.
Thanks,
-Ken

Cause: The installation which caused this symptomology was based on a boot from a downloaded ISO designated "Installation CD" (Solaris 8). Booting from, and installing based on this CD caused a incomplete installation, with many libraries missing.
Solution: Just by chance, on a re-installation attempt I booted from 'Software 1 of 2 CD" (Solaris 8). Installation based this boot yielded a complete installation - no libraries missing.
Thanks for the suggestions,
-Ken

Fix to missing/non working driver for webcam after installing new OS

Webcam doesn't work on your lenovo 3000 laptop?
I ran into this problem after reeinstalling XP on my machine. MSN tells you that other apps are using the cam, the driver seems messed up. Since I have seen several unresolved posts referring to this I figured I would post how to fix it here.
If you read somewhere else to go download the driver from sonyx, this will not fix your problem.
Instead, go into control panel, add hardware, tell it the hardware is already connected and it will show you all the devices that are connected to your pc, including the cam. Have it install the cam automatically. You've probably gotten this far already.
Now what you need to do is repeat this step for all the "Standard PCI to USB host controllers" that you see listed that are not yet installed.
Work?
Message Edited by importfr87 on 01-17-2009 10:13 PM

Thanks.
Backup was done by blackberry ID of previous owner, after installing i chahged previus owner ID to my new ID, but now i don't have access to previous owner ID.
Now there is an error - ID of back up doesn't suit new blackberry ID.
I tried to use BlackBerry Backup Extractor to remove date to computer, then copy to the phone. But there is now BlackBerry Backup Extractor which works with Z10......
Maybe you know some prog which can help me restore data to computer? Then would be able to copy data to the phone.
thanks.

Sound missing after installing windows 8.1 pro.

hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
product name: laptop hp 620.
a day before this, i had windows 7 and everything worked fine. tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

Hi:
The only suggestion I can offer would be to try a W8.1 IDT audio driver...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

External Hard Drive not working after installing mavericks

After installing mavericks, I hooked up my external hard drive,
and it would not show up on the computer. Tried checking if
it showed in utilities, also a no show.
Should I uninstall the ntfs software which is a few years
old and instal a newer version?
Looking for a solution which doesn't involve reformatting my nearly full
1TB EHD, please :)

I think I have version 10.8.6 of mavericks, not 10.9.

Boot Camp is missing after installing windows 8.1

One year ago i installed Windows 8 preview on my macbook air with Boot Camp and it has been working perfect until now.
I downloaded and installed Windows 8.1 full version directly from microsoftstore, but afterwards Boot Camp driver was missing from Windows (from Notification Area and Task Manager->Startup). Then i cant switch back to OS X.
Need help!

holding in option key during startup present you with the option of which partition you wish you boot into
you find the latests apple bootcamp drivers and utils here
Apple - Support - Downloads
just need to find the version which match your mac

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

Time and Classifieds services missing after installing LabVIEW 8.0

Hi,
After installing LabVIEW 8.0 I noticed the Lookout Time and Classifieds services are missing. At first I thought it was just the Lookout lighthouse in the system tray which had disappeared but when checking in services.msc I can see that the services themselves are no longer there. The Citadel server is, however.
I am using Lookout Direct so please let me know if this question is more appropriate on the Automation Direct forums. I'm trying to change to a NI solution instead but every step is taking me considerable time.
Thanks,
Dave

Try to repair Lookout Direct from Windows Add/Remove Programs. The missing services should be reinstalled after repair.
Ryan Shi
National Instruments

Gallery blur missing after installing 2014

missing gallery blur after installing 2014 ps.

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

Found "A required CD/DVD drive device driver is missing" when installing Window 7 64bit.

Hello,
I just bought X220i with Core i-3, ram 8G. When I tried to install Window 7 64bit (Coz of Ram 8G), I got the message “A required CD/DVD drive device driver is missing...”. I did browse the driver (using USB 3 Driver) but, it didn't work.
Any idea to resolve?
Thanks in advance.
Solved!
Go to Solution.

What media are you using to install win 7? USB DVD drive, flash drive, ??? Downloaded ISO or Lenovo or Microsoft DVD?
One reason (of many) you can get this error message is bad media - corrupt download, bad burn, defective flash or optical media. I've also heard of problems with USB ports causing this. If you're using USB media, have you tried another port?
And as NINE asked, when in the process do you get this error?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Icon missing after installed Adobe

Hello,
Does anyone have the mac icons missing issue after installed adobe creative cloud installer?
My macbook pro icons were missing (didn't show) right after I installed Adobe Creative Cloud Installer (download from Adobe website).
At first, I thought the issue is my machine, so I went to apple store genius bar and left my mac for a week to let them find out the reason.
Apple erased my system and reinstalled it, and machine passed all the diagnose test.
Yesterday, I got my mac at apple retail store and everything was normal (no icon missing).
Right after I installed Adobe Creative Cloud Installer, the icons were missing. Then, I uninstalled Adobe Creative Cloud Installer, everything was back to normal, including icons were back.
I have no idea how this happen and why. But according to apple, they told me it should be the software issue and ask adobe for help. Adobe there is no phone call support form Adobe.
Does anyone have the same issue like this, or does anyone know how to solve the issue?

Hi Jeff,
Thank you for your reply. Please see the screenshot.
This is when I try to create a folder, it happens like this.
The second one is after I close this folder and reopen it. Please the second image.
The last image is very funny which I am not able to see anything form applications folder. But, actually, there are a lot of things. As you can see from Dock, there are many things like imessage, Photoshop, chrome etc. They just not shown!
I can only uninstaller the Adobe Creative Cloud Installer to solve it.
Do you have any idea how to solve it by any chance? Apple said it was caused by the software. They even replaced my logic board to solve it, but they still couldn't.

Windows XP drive not found after install

After installing Windows XP on boot camp, I have found that the computer will restart and then fail to find the drive I have just installed windows on giving me an error message something like "Cannot locate boot disk". If i restart into OSX then it finds the drive but i cannot boot into windows because it will just display the error message. If i try installing Vista this works fine but Vista is shockingly awful and i would sooner have XP. Any ideas??

Evening all
Have you disabled any Norton, KAS, antivirus anti spyware programs?
Did you set a restore point prior to installing the Sp3?
Which method did you install the Sp3 from? full adminstrator account or apply the subinacl program and reset.cmd ?
There may be other problems prior to install of Sp3, Are the bios,of the systems you are using, the latest version?
What type of system are you using?
Are you using the latest W.H.Q.L. Microsoft signed drivers video available for your system? 174.74 from Nvidia, 8.4 catylst for ATI/AMD?
If you are using X2 processor both the processor driver and the dual core optimizer. You cannot depend on the Sp2 driver for proper operation.
What about chipset drivers?
And the mouse, and other perpherials?
If you have any unsigned drivers you will have endless reboots.
If you check the system to see if safe mode is available you can trouble shoot what is happening
*Press f8 prior to the Windows splash screen*
Log in as adminstrator *Full one*
If you are using an AMD machine, check the regedit for the following key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm\Start
If this key exists change it to 04 Hexdecimal and reboot.
as seen here
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3072752&SiteID=17
If you are still having problems see follow the advice at the end of this posting and add what problems you are having. And send the logs after a MSFT team member responds with an address.

Internal drive B missing after install of 10.4.4

Similar Messages

Maybe you are looking for