Internal error 2329 when trying to install itunes 7!

Whenever i try to install itunes 7/Quicktime, it will start and then in the middle of installation, a pop up comes up that says, "internal error 2329. 32, C:\Config.Msi" and then it says that the installation is 'rolling back' and it fails to install....HELP!
HP Windows XP DSL

let's get an installer log to the Apple Engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing (if you are seeing one)

Similar Messages

Error 2755 when trying to install itunes on my laptop please help

error 2755 when trying to install itunes on my laptop please help
the installation process gets so far then the error 2755 appears saying that it cannot be installed

Hey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Error Message when trying to install iTunes

I'm trying to install itunes to my laptop. It downloaded tp my computer fine, but as it tries to install i receive and errror window that says, "Application support is currently suspended. you must undo the changes made by that installation to continue. Do you want to undo those changes?" if i click "yes" it pops up again immediately. if I press "no" the installation tries to continue and the same message pops up 3 more times. if i press "no" to clear it i finally get the message, "iTunes Installer Interupted. Errors occured during installation before the requested operations for the iTunes could be completed. Your system has not been modified. To complete the installation, run the installer again. Click Fiinish to exit the installer." If i hit finish and try again, I go through all the same errors each time.
I have windows 8.
Any ideas?

many thanks.
It failed to update and the error code is 8000FFFF
Good-O ... with that one, let's try the fixit from the following Microsoft document:
[Windows Update error 8000FFFF|http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error- 8000FFFF]
Does that get your Windows Updates flowing again? If so, stock up on the ones you're behind on (there may be quite a lot of them) and then try another iTunes install. Does it go through properly this time?

Error occured when trying to install iTunes 11.0.4

I'm having a problem trying to install iTunes 11.0.4 on Windows 7. I tried to perform a clean boot and restarting my computer and that doesn't work.

Hey, CardsFan
Welcome to Apple Support Communities.
That is a very common problem,
- Just uninstall the whole software.
- Use a registry cleaner software and clean the reg
- Restart the pc
- Download fresh copu of itunes from the Apple site
- Install
And them you are done.
I really hope this helps you. Let me know if it does. If not feel free to give me a shout. Best of luck.

Weird Error Message when Trying to Install iTunes 10

I had to uninstall iTunes recently because it was getting an error message when I tried to open it and that message suggested I remove and reinstall it. Now when I try to install iTunes 10 (I had a lower version before, iTunes 9.something), I get this message:
An error occured during the installation of assmebly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x76"'. Please refer to Help and Support for more information. HRESULT: 0x8007054F
I absolutely hate messages like these, you can't do anything with them and it makes you feel like the problem is unfixable. Hopefully that's not the case because until this is fixed I have no iTunes or Quicktime.

Through my own cunning and genius, I have found the way for someone else to guide me step-by-step exactly what to do.
For anybody else having this problem, GO HERE: http://support.microsoft.com/default.aspx?scid=kb;en-us;946414
The solution is that "Regedit" thing where you delete certain parts of your registry and then restart your computer. Just do like it says there and you'll be good to go. Finally, this nightmare of epic proportions is over, and I can get back to playing airsoft.

Error message when trying to install iTunes on my pc

Hi I have tried several times now to install iTunes on my PC (Windows XP).
The error message reads: "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified".
I have tried the help topic "Using Msconfig to troubleshoot conflicts in Windows XP" but I don't have the "iTunesHelper" and "qttask" checkboxes at step 7. I have tried carrying on without these two tick-boxes and restarted the pc but I get the same error message.
Any ideas (gratefully received!)?

Hey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Error message when trying to install itunes 9

I checked already to see if this was answered earlier and it isnt. so.
When i open the itunes installer and right after it prepares to install i get the message "invalid drive:F:/" and then itunes installer tells me that it cannot complete the install. I usually am able to get around things like this myself but im stumped here so please if you can help me. thanks.

When i open the itunes installer and right after it prepares to install i get the message "invalid drive:F:/"
Often the cause of that is that the Windows installer database (that Windows installer checks on when uninstalling previous versions of iTunes) has become convinced that an iTunes program file or whatnot is actually located (in your case) on the F drive. If you don't happen to have an F drive on the system, the installer gets horribly confused when it goes to remove the file (or files or whatnot) and you get an "Invalid drive:" error. (In your case, "Invalid drive:F:/".)
So first we should try temporarily adding an F drive to your system. (If the Installer can actually see an F drive it usually calms down, even if the files/whatnot in question aren't there.)
Here's Vista instructions for that.
Do you have an external drive or a thumb drive of some description? (An iPod in manual mode would do fine ... anything that shows up in "Computer" as a drive would be fine.)
If so, plug the external drive in. Go "Start > Computer" and check the drive letter it gets assigned in "Computer".
(1) *If the drive letter the external is assigned is F,* try another iTunes install *(install iTunes to its standard default location, not onto the F).*
(2) *If the drive letter the external is assigned is not F,* change the drive letter to F using Disk Management, using the following steps:
In your Start menu, right-click "Computer", and select "Manage"
Click "Disk Management".
In Disk Management, right-click the external drive and select "Change Drive letter and paths ..."
Click "Change".
Select "F" and click okay.
Now try another iTunes install *(install iTunes to the default location, not onto the F).*
Does that get you past the "Invalid Drive F" message?

GEAR driver error message when trying to install iTunes on Vista

The error message I am getting is as follows:
"Unable to install the GEAR driver set at this time. The GearAspiWDM service used by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again."
I have followed all the instructions for completely removing iTunes and trying again. I have also tried to install the Quicktime/iTunes package. Nothing is working!! My son got this iPod shuffle as a reward for doing great on his SOL tests and he hasn't even been able to enjoy it yet because I can't get iTunes to install! Please help!!

The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot.
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

Error messages when trying to install itunes

I keep getting the message
"could not write value to key\software\classes\.rmp\openwithlist\itunes.exe
PLEASE HELP ME.... i'm about the throw the computer out the window!
thanks.

+could not write value to key\software\classes\.rmp\openwithlist\itunes.exe+
That's not the most common of keys to be cited in this context. However it's close enough to a different (more familiar) key message to suggest a course of action.
Try a modified version of the registry edit procedure described in the following document:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
The modification is in Step 6 ... here, *Click the reveal button next to ".rmp."* (instead of .cdda) and do all the subsequent backups/edits within the .rmp branch of the Key.
Any help?

Internal Error 2842 when trying to install from CD

I am running Windows 7 and had it corrupted recently. I reinstalled Win7 and had to reinstall all of my stuff. Everything works fine. When I went to reinstall my Palm Tungsten E2 from disc, I get 'Internal Error 2842' and can't continue.
Any ideas???
Post relates to: Tungsten E2

i found out how to fix it.....the error happens on windows vista 32 and 64 bit computers.... you can fix by going to your "command prompt" (found in accessories or just type in the search bar) and DONT CLICK. you have to first right click and pretty "Run as Administrator" and then a window will come up with stuff on top but the last few words should say "C:\Windows\System32>" and then type right after
"regsvr32 jscript.dll" and yes there is a space between
regsvr32 and jscript and hten simply press enter on your keyboard and run the install again

Why do I get an Error 7 when trying to install iTunes 12?

iTunes 11 worked great; however, when I try to install iTunes 12, I get an error message that states that Apple Mobile has not started correctly.

Hi Linda,
If you are having an issue with installing iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article -
If you can't install or update iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

2349 error code when trying to install itunes on my computer Any one know why

Is there any way to reach A real person on i tunes? and anyone know why i cant install itunes

Hey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

TS3212 I am getting a error 7 when trying to install Itunes stating that there is a missing .dll file

I am getting an itunes.exe system error stating that it cannot start because the MSVCR80.dll is missing. Could you help please

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99145)

Error message when trying to install itunes. please help

"This installation cannot be run by directly launching the MSI package. You must run setup.exe."
in Downloaded Installations folder on my computer, I clicked on the downloaded itunes applications and that was the dialog box that popped up on my screen. What do I do? And how do I do it! please help.
Message was edited by: minrd

hmmmm ... it sounds like you're clicking inside the folder containing installation configuration information for your iTunes.
what happens if you download and save a copy of the iTunesSetup.exe (installer) file to your desktop, and then run the install by doubleclicking on that?
here's a link to the installer download:
iTunes 7.1.1.5 installer

-200 error message when trying to install itunes 7

Whenever I agree to the user agreement, I get this message -200 The itunes application can not be opened. Unknown error occured. Any ideas?

OK. So I went back into the tech support for some older versions of itunes and was able to figure this problem out.
Go to this URL and go thru ALL the uninstall older versions directions.
http://docs.info.apple.com/article.html?artnum=93976
It worked.

Internal error 2329 when trying to install itunes 7!

Similar Messages

Maybe you are looking for