Internal error 2753. Updater.api_NON_OPT

Has anyone seen this message when trying to install Reader v 8.1? It occurs about 80% of the way through installation and gives a fatal error.

For GPO Installation - Try the following
1. Create Reg file
Windows Registry Editor Version 5.00
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Features\68AB67CA7DA73301B7448A0000000020]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\68AB67CA7DA73301B7448A0000000020]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Features\68AB67CA7DA73301B7448A1100000030]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\68AB67CA7DA73301B7448A1100000030]
2. Set batch file to run Reg file with GPO startup script
3. Set software installation policy for Adobe 8.1.2
The process deletes the unneeded registry keys and so that Adobe 8.1.2 can be installed cleanly. The stations may have to be restarted twice due to the way Windows processes the GPO settings.

Similar Messages

Internal Error 2753 Updater.api Adobe Acrobat Pro 9

I'm getting an error while trying to install Acrobat Pro 9 saying:
"Internal Error 2753 Updater.api"
I don't have any other version of Acrobat installed in XP Pro sp2.
I have seen suggestions on this for version 8 to use the installer instead.
I haven't found the download link to the msi file for Acrobat Pro 9.
It really would be nice if they fixed the problem since it was happening in 8 also.
Thank you,
Docfxit

This is for a different version of Acrobat, but it might help:
Mike

BlueTooth Update Error (Internal Error 2753, F84988_btins.dll)

Hello All,
Hope someone may be able to sort this one out for me; my efforts so far have been useless
I am using a ThinkPad R60e (model # 0657-3LG), running Win-XP-Home Premium - SP3, with BlueTooth built-in; it worked fine until a few days ago, when I allowed ThinkPad SystemUpdate to attempt to update its driver (Bluetooth with Enhanced Data Rate Software) to its most current version (5.5.0.6400).
For the first time in its over two years life, SystemUpdate STALLED during the update (never done that for ANY piece of software, application or driver!).
I had to "brutally" abort it (after several hours of wait), and tried again: same result.
I downloaded the update from Lenovo's Web site, and tried to run it manually (not under the SystemUpdate services): again, it stalled eventually.
Assuming an incomplete update was performed, I entered the Windows Control Panel, and went through an UNinstall of the software (to clean the area), closed the Bluetooth radio, and done a reboot.
Further to which, I restarted the Bluetooth radio, cancelled the Windows' "detected new hardware" pop-up, and tried to install the driver anew (from the file I previously downloaded); complete failure, with a pop-up stating "Internal Error 2753, F84988_btins.dll".
Repeated attempts, produced the same result; this time, the software no longer appears however under the Windows' Control Panel's "Add/ Remove Programs" (incomplete install ...)
Under the Device Manager, I was able to bring the device back to life by "rolling-back" the driver (although the "back" shows now version 5.5.0.6500", which is the current one), but there are no icons (either in the SysTray or on the Desktop) through which I can access "My Bluetooth Places".
In view of the above, and as I should like to restore Bluetooth functionality:
1. Any ideas what the said error means, and how it should be handled?
2. Any way to COMPLETELY clean any trace of Bluetooth installation, to enable me start PERFECTLY clean with a new install?
3. Assuming that MAYBE the installer conflicts with some other software that runs in the background, can the R60e be started in Safe Mode, and -- if so -- can the Installer run in this mode? (alternatively, what is the minimum configuration that allows the ThinkPad to start and enable the Installer to run?)
4. Any other productive suggestions will be most welcome.
Thanks in advance for your help,
Rougena

Hi Rougena,
I am sorry I think I am the only one reply you.
And even I do not anwser your question, I post because I have the same problem either.
My situation is similar that the bluetooth driver never update through Thinkvantage system update.
So I run the manual one to update it.
The wrror info showed my screen is a bit different from yours.
Mine is "internal error 2229, launchcondition"
I have search around the internet, but no anwser either.
That's why it lead me to your post.>_<
What useful info I got so far?
From Broadcom website, they said if the bluetooth works well, then dont need to update to the lastest one.
However, mine didnt work well, when I connect to my logitech bluetooth keyboard, it always has problem to paired.
I hope the IT person in IBM/Lenono will notice this problem and resolove it soon.
Colin

Internal Error 2753 RegUtils CANNOT INSTALL/REINSTALL JAVA JDK

XP Pro SP 3
My JDK install is corrupt.
When attempting to Reinstall jdk1.6.0_26
I receive the error
Internal Error 2753 RegUtils
The are no entries in Add/Remove Programs to Remove any version of JAVA
JavaRA 1.16 does not resolve issue
Windows Removal Tool
msicuu.exe
shows no presence of any Java programs
Using command line arguments jdk1.6.0_26.msi /uninstall
gives message "This patch package could not be opened.
Original install was to location
R:\Program Files\Java\jdk1.6.0_26
This directory no longer exists
Also
C:\Program FIles\Common\Java directory does not exist.
Does Oracle provide a complete JAVA removal tool so I can reinstall Java JDK?
Error is also occurring trying to install JAVA For Windows Version 6 Update 26 error message
JAVA Setup Internal Error 2753 regutils.dll
When redirected to JAVA Help http://www.java.com/en/download/help/index_error.xml
Java Help does not mention error code 2753
Edited by: user2079676 on Jul 17, 2011 7:42 AM

Moderator Advice:
You received your solution in your duplicate cross-post:
Error 2753
This one is now locked.

OIM Design Console Internal error while updating task attributes

Hi All,
I have installed OIM9101 on jboss, the set up is running fine. I am in the process of integrating a OID connector following steps given OID connector guide. In design console(Administration-->Task Scheduler) while modifying "OID Group Lookup Reconciliation Task" attributes, attribute value is not getting saved. When i click on save option it shows a pop up windows saying "problem in updating task attributes. update failed."
Any solution for this??.. Please help.
Thanks in Advance.
Edited by: VAYANAKA on Nov 26, 2010 10:48 PM

Thank you for the reply..I have tried to create a new scheduled task. But while saving it again an Internal error pop up window comes saying " Description:Could not execute database read.The database encountered a problem with the specified SQL Query.Remedy: Check the database query.Contact your system administrator."..
Is it any problem with my database.? I have checked database, its up and running??
Thanks In advance.

Serious Internal Error when Updating Book

I am trying to update a book, and everytime I get a serious internal error. We recently updated the book with no issues. I have tried deleting the generated files (lists of paragraphs and standard indexes) and reinserting them, but still get the error. Any ideas??

How do you do a mif wash? I've seen that on other forums but not sure what it means... I've tried opening all of the files in the book, and I'm not getting an error of any kind. Thanks for the help!

CSM v4: Internal error Exception updating Policy: PG. PLATFORM.Pix.AuthenAuthorPage

HI, someone could help me.. i have this problem in CSM v 4..when add Cisco ASA 5505 ..IOS 8.3 "Exception u´dating policy:PG.
I had tried to add like ASA device and PIX device. but i cant....Someone could help me ..
Thank ...Marco..

Please open a case with Cisco TAC providing you CSM diagnostics file.
They should be able to tell more from it.
PK

Error 2753 Uninstmanager.dll

I'm trying to uninstall Acropbat 7.0 Professional and receive Internal Error 2753. Uninstmanager.dll.
Any suggestions?

Moved to Acrobat Installation & Update Issues.
Try running the Acrobat Cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html

Error 2753. The File 'Dist_acrotray.exe' is not marked for installation

Hello,
I have been trying for days to figure out this problem with updating Adobe Acrobat X Pro. Whenever I try to update the software, via under help, or click the update icon in the system tray, I then proceed to download the update but get the Error 2753. The File 'Dist_acrotray.exe' is not marked for installation.
I have tried repairing the software through control panel, and I have also reinstalled Acrobat as well. PLEASE HELP!
Thanks,
Mike
Computer Specs: Win7 Ultimate 64-bit

Hi mobl11,
You might want to refer the KB Doc : http://helpx.adobe.com/acrobat/kb/error-internal-error-2753-dist.html

Internal error message MG045

Hello SAP Gurus
While Loading the forecasting Data in Tx MM01 for a few materials I got
error MG045 (Internal error while updating, inserting, or deleting from
table MPOP). SAP diagnosis text said is either a program error or there
is no longer enough space for the database table. We have lot of
space.
Any ideas.
Thanks

Aneesh,
I am so sorry to say that the RFC connection is not correctly configured
that the reason i can access the snote
Let me know if the Internal error for the table can be tackeled some how. ???
my process has totally stopped
Thanks for the reply
Sherly

Every time I try to download reader, I get a message saying 'Internal Error'.

Any ideas how to fix it?

Hi Shutterbug 762,
You might want to try downloading Reader 11 from : https://get.adobe.com/reader/enterprise/
Also try from a different browser and check.
BTW is the error similar to that mentioned in the KB : http://helpx.adobe.com/acrobat/kb/error-internal-error-2753-install.html
Do you have any previous versions of Adobe Reader installed?
Usually newer version of Reader removes the older version of Reader during installation.
You might want to run the Cleaner tool ( http://labs.adobe.com/downloads/acrobatcleaner.html )to try remove the existing installation and then try downloading it.
Further you might also want to check the install a new Admin account as 'internal errors' are ususally caused due to insuffcient user permissions.
Regards,
Rave

Internal Error: Error in the Software Update Packa...

hello,
I'm using the latest Ovi Suite and N82 (v30). I saw notification of firmware update and then clicked to update it. the updated was downloaded but when it's in the process of updating it says
Internal Error: Error in the Software Update Package Configuration
I've replugged my device after the system restart but it shows the same.
how do resolve it? neither do i see any option of redownload the update package. where does it download the update package?
thanks

And whatmake you think this is going to help? The answer from local Nokia Care Pointwas: “if you hit the phone it might be the reason for this problems and we arenot responsible for warranty void for your Nokia phone blah blah – of course Idid not hit or throw the phone but never mind – the just don’t care. Thisproblems was described in details to Nokia Care Point Finland and the answerwas … “ we are very sorry, but you need to make a connection with your localNokia Care Point” ha ha – thank you very much, they were so helpful ! That’swhy I don’t want to call or connect Nokia anymore – no help at all! Sorry ifthis information is not good for you, but it is true! Don’t believed it : check THREAD ID:1-4N513T0 from 06.January and THREAD ID:1-4N0DM6A from 05. January. That’s why I need User help, notNokia help.

"Internal error (-5002) occurred" On Pick List Update Picked Quantity

Hi Experts,
I have an SDK program that simply tries to update the Picked Quantity in SAP. Previously it has been working fine, until I try to use the same logic for items managed by Batch or Serial Number.
In this scenario, I have created a PickList with only 1 row, the item is managed by Serial Number.
I try to simplify the code as below.
Dim oBaseDocument As SAPbobsCOM.PickLists
oBaseDocument = oComp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPickLists)
BaseDocument.GetByKey(12345)
oBaseDocument.Lines.SetCurrentLine(0)
oBaseDocument.Lines.PickedQuantity += 1
oBaseDocument.Lines.BinAllocations.Add()
oBaseDocument.Lines.BinAllocations.SetCurrentLine(0)
oBaseDocument.Lines.BinAllocations.BinAbsEntry = CInt(sBinAbsEntry)
oBaseDocument.Lines.BinAllocations.Quantity += dXML_Quantity
oBaseDocument.Lines.SerialNumbers.InternalSerialNumber = sXML_BatchSerialNo ' <--- ***
lRet = oBaseDocument.Update
I have added the *** line for handling the Serial Number, but when it hit the Update command, the SDK returns "Internal error (-5002) occurred".
I'm not sure what does it means.
Anyway I tried to remove the *** line and it works fine for item not managed by Batch or Serial, but the issue will remains for the Items managed by Serial or Batch.
Please advise whether I missed anything in this code.
Thank you in advance.
Best Regards,
Krisma

Hi Krisma,
I haven't done this thing practically but error -5002 will occur, if there is any Invalid Object.
You can check it accordingly.
Hope it helps.
Thanks & Regards
Ankit Chauhan

ORA-00600: internal error code while using UpdateXML to update xml content

Hi,
I have been using the UpdateXML command to replace content of xml stored in XMLType. It was working absolutely fine.
Below is the query:
UPDATE temp d SET d.message_content = updateXML(d.message_content,'//*[.="Test" ]/text()','"Test123"') WHERE existsNode(d.message_content,'//*[.="Test"]')=1";
But now i'm getting an exception as follows:
ORA-00600: internal error code, arguments: [qmcxeUpdateXml:2.1], [], [], [], [], [], [], []
The table uses a Free Test Index.
I searched the forum and found from the given link https://forums.oracle.com/forums/thread.jspa?threadID=2352772 that corrupted Index may be the cause of this problem. I'm still clueless :(
Can someone help me?

Hi sprightee,
That thread you found seems to be a different problem (Ora-600 argument is different)
I think you have hit bug 6811908, at least if Odie is correct about your version.
Bug says No workaround - Fixed in 11.1.0.8
Regards
Peter

Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast: Exception Name: NSInvalidArgumentException Description: -[_NSConcreteUserNoti

Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast:
Exception Name: NSInvalidArgumentException
Description: -[_NSConcreteUserNotification activationType]: unrecognized selector sent to instance 0x25a06b0
User Info: (null)
0   CoreFoundation                      0x922216fb __raiseError + 219
1   libobjc.A.dylib                     0x920108db objc_exception_throw + 230
2   CoreFoundation                      0x9222563d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
3   CoreFoundation                      0x9216af77 ___forwarding___ + 487
4   CoreFoundation                      0x9216ad22 _CF_forwarding_prep_0 + 50
5   iTunes                              0x00df38e2 iTunes + 14624994
6   iTunes                              0x00df36ae iTunes + 14624430
7   libobjc.A.dylib                     0x9201c6c5 -[NSObject performSelector:withObject:withObject:] + 77
8   Foundation                          0x93c12d85 -[_NSConcreteUserNotificationCenter _sendDelegateMessage:sendToAppDelegate:withNotificationFromMessage:] + 335
9   Foundation                          0x93c12eaf -[_NSConcreteUserNotificationCenter _notificationPresentedMessage:] + 58
10 Foundation                          0x93c137c2 __block_global_1 + 156
11 libdispatch.dylib                   0x9371b2cf _dispatch_call_block_and_release + 15
12 libdispatch.dylib                   0x9371ea80 _dispatch_client_callout + 46
13 libdispatch.dylib                   0x9371c8e8 _dispatch_main_queue_callback_4CF + 223
14 CoreFoundation                      0x9211b255 __CFRunLoopRun + 1829
15 CoreFoundation                      0x9211a7c4 CFRunLoopRunSpecific + 308
16 CoreFoundation                      0x9211a67b CFRunLoopRunInMode + 123
17 HIToolbox                           0x90b6fc76 RunCurrentEventLoopInMode + 242
18 HIToolbox                           0x90b76eb9 ReceiveNextEventCommon + 374
19 HIToolbox                           0x90b76d34 BlockUntilNextEventMatchingListInMode + 88
20 AppKit                              0x97621923 _DPSNextEvent + 709
21 AppKit                              0x97621167 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
22 AppKit                              0x9761d78c -[NSApplication run] + 855
23 iTunes                              0x0017a898 iTunes + 1546392
24 iTunes                              0x0017a709 iTunes + 1545993
25 ???                                 0x00000002 0x0 + 2

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Internal error 2753. Updater.api_NON_OPT

Similar Messages

Maybe you are looking for