Internal error cant render database when working on lettering
hello; i just installed fireworks CS5 (CS5 Web Premium) i was working with a font, i wanted it to be outlined in yellow, so i cliked the color for the outline, and i get this error: internal error, cant render database, so i click ok, it comes right back, and will not quit, cant exit program, so did task mgr to end program, but it just keeps coming back if i try to built the words i want outlined, is there a fix for this? Can i uninstall just fireworks, and reinstall to fix it? i would rather not uninstall the suite, there must be a way to fix this. i seem to be able to do other stuff with jpg's with no problems, it is just with any lettering.
thank you for any help
check if the user has the rights to start or stop the database services in the new domain. it could be a privelege issue within NT.
Similar Messages
-
Root cause of "SQL error in the database when accessing a table. "
Dear experts,
I meet this dump "SQL error in the database when accessing a table" when executing a sql.
Sql:
SELECT sesssessno poscrm_serplan_id poscrm_ser_h_id poscrm_ser_i_id
possolution_id sessbundle_id sessdbid sessinstno pos~crm_ordered_prod
sessdbid sessinstno
INTO CORRESPONDING FIELDS OF TABLE et_sess_list
FROM dsvassessadmin AS sess JOIN service_posn_sm AS pos
ON possession_id = sesssessno
FOR ALL ENTRIES IN lt_contractno
WHERE sess~contractno = lt_contractno-contract_no
AND sess~status IN lt_status_range
AND bundle_id IN lt_bundle_id
AND pos~solution_id GT 0
This sql works well in dev system SD7, however, it causes dump in another dev system "SMV".
Can anyone give me any ideas?
ThanksHi Jovito,
This is info from ST22
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "SQL0101N The statement is too long or too
complex. SQLSTATE=54001" Internal call code.........: "[RSQL/OPEN/DSVASSESSADMIN ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_AGS_SERVICE_SERV===========CP" or "CL_AGS_SERVICE_SERV===========CM018"
"GET_OVS_SESSION_LIST"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"GET_OVS_SESSION_LIST" "(METHOD)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
It seems that after translation the native sql is too long. But I think this can be solved. -
SQL error in the database when accessing a table.
Hi,
I got below error at production server. Please suggest how to reslove this error.
<br>
<br>
<br>
Runtime Errors DBIF_RSQL_SQL_ERROR
<br>
Exception CX_SY_OPEN_SQL_DB
<br>
Date and Time 02.01.2011 15:55:06
<br>
<br>
<br>
<br>
<br>
Short text
<br>
SQL error in the database when accessing a table.
<br>
<br>
<br>
How to correct the error
<br>
Database error text........: "[10054] TCP Provider: An existing connection was
<br>
forcibly closed by the remote host.
<br>
[10054] Communication link failure"
<br>
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
<br>
Please check the entries in the system log (Transaction SM21).
<br>
<br>
If the error occures in a non-modified SAP program, you may be able to
<br>
find an interim solution in an SAP Note.
<br>
If you have access to SAP Notes, carry out a search with the following
<br>
keywords:
<br>
<br>
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
<br>
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
<br>
| "ADD_INSTANCE"
<br>
<br>
<br>
Information on where terminated
<br>
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
<br>
in "ADD_INSTANCE".
<br>
The main program was "SAPMSSY1 ".
<br>
<br>
In the source code you have the termination point in line 16
<br>
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
<br>
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
<br>
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
<br>
declared
<br>
in the RAISING clause of its signature.
<br>
<br>
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
<br>
code begins in line
<br>
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
<br>
<br>
<br>
<br>
Source Code Extract
<br>
<br>
Line
SourceCde
<br>
<br>
1
METHOD add_instance .
<br>
2
<br>
3
data: ls_id type swfcntbuf.
<br>
4
<br>
5
check buffer method - store in local buffer if necessary
<br>
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
<br>
7
<br>
8
CHECK m_buffer_method EQ mc_buffer_shared.
<br>
9
<br>
10
append key to list of tasks to add stored in database table SWFCNTBUF
<br>
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
<br>
12
<br>
13
ls_id-mandt = sy-mandt.
<br>
14
ls_id-id = ibf_por.
<br>
15
<br>
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
<br>
17
FROM ls_id.
<br>
18
<br>
19
IF sy-subrc EQ 0.
<br>
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
<br>
21
database locks
<br>
22
COMMIT CONNECTION r/3*wfcontainer.
<br>
23
ENDIF.
<br>
24
<br>
25
ENDMETHOD.
<br>duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum. -
dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
dyn_where TYPE string,
gx_sql_err TYPE REF TO cx_sy_open_sql_error,
gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
cx_sy_dynamic_osql_semantics INTO gx_sql_err,
cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas -
DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table
Hi Gurus,
Im getting DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table error while I was importing support pack in the system. This is ERP 6.0 with EHP4 with MS SQL in back ground and I was applying the BASIS SP 04. It was in the TEST scenario and in the SPDD_SPAU_CHECK phase it threw the error.
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "[601] Could not continue scan with NOLOCK due to
data movement."
Internal call code.........: "[RSQL/FTCH/E071 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLSVRT" or "LSVRTU01"
"TR_LAST_IMPORT_OF_OBJECT"
SPAM is ending with the above short dump. I have checked the space availability and it is OK.
Kindly help.
Renju Aravind.Hi,
this error is very often seen in case of a database corruptions. Please follow note 142731 and perform a complete database check. Send the results when they show errors.
Best regards
Clas -
Internal error - access to IT_ADR2_L when adding E1BPADTEL/SMTP segments (i
When Syndicating Customer Master Data from MDM to ECC (using an iDOC), I receive the following error....
Internal error - access to IT_ADR2_L
when adding data in E1BPADTEL and E1BPADSMTP segments (in E1ADRMAS).
Has anyone received this error?
Thanks!!
MMFDear Harry
I think there are any permission issue better to talk basis team, because i has work in my side. -
Getting error "SQL error in the database when accessing a table."
Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
SQL error in the database when accessing a table.
How to correct the error
Database error text........: "ORA-01555: snapshot too old: rollback segment
number 21 with name "_SYSSMU21$" too small"
Internal call code.........: "[RSQL/FTCH/VBRK ]"
Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AMThe query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
, VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
, VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
inner join VBRP
on VBRPVBELN = VBRKVBELN )
where VBRK~BUKRS in SP$00004
and VBRK~FKDAT in SP$00001
and VBRK~KUNAG in SP$00002
and VBRK~VBELN in SP$00006
and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
extract %fgwrVBRP01.
endselect. -
Inbound-Queue SYSFAIL: SQL error in the database when accessing a table
Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
brHi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br -
Internal error in the database interface (Oracle)
I have recently an Oracle runtime error just by entering the SAP system (SAP ECC 6.0).
DBIF_RSQL_INVALID_REQUEST
The current ABAP/4 program terminated due to
an internal error in the database interface.
Error analysis
An invalid request was made to the SAP database interface in a statement
in which the table "DOKTL " was accessed.
Trigger Location of Runtime Error
Program SAPLSDOC
Include LSDOCU09
Row 249
Module type (FUNCTION)
Module Name DOCU_GET
I appreciate any helpful information.
Thank you very much indeed
Thomhi Thom,
most error relating to table DOKTL are caused by misconfigured network card.
if this is a "home" system, install a loopback adapter from Microsoft and use IP address 127.0.0.1 and also check "hosts" file for inconsistency. do not use the IP adddress provided by your ISP as it may change. -
How to render faster when working on project
how to render faster when working on project in motion 5? Working on a project gets very slow when a lot of elements are going such as 3D
In the Render menu, top right of the Canvas pane, you can turn off all the render settings not in use, such as lighting, shadows, etc. Also, set the resolution and quality in that menu down lower.
When you're ready to export, you can re-set those settings to how you want it to export. -
Ora-00600: internal error on 11g database in windows 2007 environment
Hello , i have these problems please help me to solve it.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Windows\system32>set ORACLE_SID=testsid
C:\Windows\system32>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://local:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
Logs are generated in directory C:\app\23333941\product\11.1.0\db_3/local_testsid/sysman/log
C:\Windows\system32>sqlplus sys/@**** as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 09:27:37 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Plus: Release 11.1.0.6.0 - Production
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Use SQL*Plus to execute SQL, PL/SQL and SQL*Plus statements.
Usage 1: sqlplus -H | -V
-H Displays the SQL*Plus version and the
usage help.
-V Displays the SQL*Plus version.
Usage 2: sqlplus [ [<option>] [<logon>] [<start>] ]
<option> is: [-C <version>] [-L] [-M "<options>"] [-R <level>] [-S]
-C <version> Sets the compatibility of affected commands to the
version specified by <version>. The version has
the form "x.y[.z]". For example, -C 10.2.0
-F Enables the failover mode for a RAC environment.
-L Attempts to log on just once, instead of
reprompting on error.
-M "<options>" Sets automatic HTML markup of output. The options
have the form:
HTML [ON|OFF] [HEAD text] [BODY text] [TABLE text]
[ENTMAP {ON|OFF}] [SPOOL {ON|OFF}] [PRE[FORMAT] {ON|OFF}]
-R <level> Sets restricted mode to disable SQL*Plus commands
that interact with the file system. The level can
be 1, 2 or 3. The most restrictive is -R 3 which
disables all user commands interacting with the
file system.
-S Sets silent mode which suppresses the display of
the SQL*Plus banner, prompts, and echoing of
commands.
<logon> is: (<username>[/<password>][@<connect_identifier>] | /)
[AS SYSDBA | AS SYSOPER | AS SYSASM] | /NOLOG | [EDITION=value]
Specifies the database account username, password and connect
identifier for the database connection. Without a connect
identifier, SQL*Plus connects to the default database.
The AS SYSDBA, AS SYSOPER and AS SYSASM options are database
administration privileges.
<connect_identifier> can be in the form of Net Service Name
or Easy Connect.
@[<net_service_name> | [//]Host[:Port]/<service_name>]
<net_service_name> is a simple name for a service that resolves
to a connect descriptor.
Example: Connect to database using Net Service Name and the
database net service name is ORCL.
sqlplus myusername/mypassword@ORCL
Host specifies the host name or IP address of the database
server computer.
Port specifies the listening port on the database server.
<service_name> specifies the service name of the database you
want to access.
Example: Connect to database using Easy Connect and the
Service name is ORCL.
sqlplus myusername/mypassword@Host/ORCL
The /NOLOG option starts SQL*Plus without connecting to a
database.
The EDITION specifies the value for Application
Edition
<start> is: @<URL>|<filename>[.<ext>] [<parameter> ...]
Runs the specified SQL*Plus script from a web server (URL) or the
local file system (filename.ext) with specified parameters that
will be assigned to substitution variables in the script.
When SQL*Plus starts, and after CONNECT commands, the site profile
(e.g. $ORACLE_HOME/sqlplus/admin/glogin.sql) and the user profile
(e.g. login.sql in the working directory) are run. The files may
contain SQL*Plus commands.
Refer to the SQL*Plus User's Guide and Reference for more information.
C:\Windows\system32>sqlplus sys/1118@testsid as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 09:29:03 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: sysdba
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: sys
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
C:\Windows\system32>sqlplus/nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 09:32:59 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect/as sysdba
Connected.
SQL> create table test(id number, id1 number);
create table test(id number, id1 number)
ERROR at line 1:
ORA-01109: database not open
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcrfr_update_nab_2], [0x51434A54],
[2], [], [], [], [], []
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Windows\system32>startup mount
'startup' is not recognized as an internal or external command,
operable program or batch file.
C:\Windows\system32>sqlplus/nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 10:05:42 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect/as sysdba
Connected.
SQL> startup mount;
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> recover database;
Media recovery complete.
SQL> select GROUP#,SEQUENCE#,ARCHIVED,STATUS from v$log order by SEQUENCE#;
GROUP# SEQUENCE# ARC STATUS
2 539 NO INACTIVE
3 540 NO ACTIVE
1 541 NO CURRENT
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Windows\system32>sqlplus/nolog
SQL*Plus: Release 11.1.0.6.0 - Production on Fri Jul 5 10:17:10 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected.
SQL> startup mount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup;
ORACLE instance started.
Total System Global Area 313860096 bytes
Fixed Size 1332892 bytes
Variable Size 276826468 bytes
Database Buffers 29360128 bytes
Redo Buffers 6340608 bytes
Database mounted.
Database opened.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110: data file 1:
'C:\APP\23333941\ORADATA\TEST\DATAFILE\O1_MF_SYSTEM_8XB8TY3S_.DBF'
SQL> select GROUP#,SEQUENCE#,ARCHIVED,STATUS from v$log order by SEQUENCE#;
GROUP# SEQUENCE# ARC STATUS
3 540 NO INACTIVE
1 541 NO INACTIVE
2 542 NO CURRENT
SQL> restore database;
SP2-0734: unknown command beginning "restore da..." - rest of line ignored.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110: data file 1:
'C:\APP\23333941\ORADATA\TEST\DATAFILE\O1_MF_SYSTEM_8XB8TY3S_.DBF'
SQL>
Thanks with regards Ganaa;What happened prior that resulted in the disaster scenario that you posted/
When was the last time the DB opened with out error?
What changed since then? -
Internal error in FW CS6 when changing fonts
Has anyone else been plauged by an internal error when using fonts in FW CS6?
Whenever I create some font and then go back to edit that font it won't let me, it gives me an internal error. I have tried deleting the following files > Fireworks CS6.mch, Font Map, Fireworks CS6 Panel Prefs & Preferences... nothing appears to work.
I have since then uninstalled and reinstalled FW.
I'm using creative cloud...
ThanksThis sounds like the same problem that I have recently been having with FW CS5:
If I try to edit an exiting text entry, the program allows it -- but as soon as I move the cursor out of the text area, it reverts back to the original, saying that the 'file is locked'.
I also get an error message saying an "internal error" has taken place in the program. Then, when I close the program, I get the following error message:
I have been using this version of FW for several years (it's an authentic, registered copy), but the problem began in just the last few weeks. The only changes that I've made to my system in the last little while are the regular WIndows 7 updates. (Could there be a connection?)
I've tried reinstalling the program, but the problem is still there.
If you find how to solve your problem, can you post how you fixed it?
Thanks. -
"An internal error has occurred" message when scanning from MX922 to desktop using Windows 7
I am no longer able to scan using my MX922 connected to my desktop running Windows 7 without getting a message on my desktop saying "An internal error has occurred". I have turned the MX922 on and off, I have disconnected both the power cord and USB cable from the MX922 and from my desktop, I have reconnected the USB cable to a different port on my desktop, I have uninstalled all Canon programs from my desktop and reloaded all Canon programs with the MX922 CD, and I have restarted the desktop multiple times. I scan documents several times a week for my business. It has worked fine until today. What do I need to do to correct this problem and get back to scanning?
Hi boisseaujm,
If you temporarily disable any antivirus or firewall software that is on your computer, then attempt to scan again, are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Cant start database when server joined to domain
Hi,
I have installed oracle database 8.1.7 on a windows 2000 server machine while the server was connected to a network as a workgroup machine.
when i joined the server to a domain! the database didn't startup even manually!
i used DBA studio but it failed starting without giving any error messages.
i tried to use svrmgrl but it failed to connect!
cant any 1 help me on this issuecheck if the user has the rights to start or stop the database services in the new domain. it could be a privelege issue within NT.
-
Why am I getting an "internal error", just "Assertion failed" when calling createKeyword
Here is my code. It is called inside a function running under LrTasks.startAsyncTask. The calls to "Util.writeLog" confirm that createKeyword is called and never returns.
Util.catalog:withWriteAccessDo(
"CreateKwUnderPerson",
function()
Util.writeLog("Calling 'createKeyword()'")
akw = Util.catalog:createKeyword( name, {}, true, nil, true)
Util.writeLog("'createKeyword()' returned")
end
I find it disconcerting that there is no more informative error message. This seems to me to be an Adobe bug, even though the problem presumably originates from something I'm doing wrong.Thanks, but yes, I did knew this. It's all working now. When I first got your message my first reaction was to reply saying "that's not it—it's not nil"; but then I thought "I should check, it would be better if I could say I'd checked", and five minutes after that it was all cleared up. A lesson.
Thanks again. I did download your debugger (and used parts of the package) but thought that for what I was doing just using a logfile, with tail -F, would be enough. I'm migrating from Aperture and iPhoto, and thought that at the same time I could try to orgaineze my keywords. It's been frustrating but enjoyable.
And you said in the first message "given the nature of Lua". After trying to use Applescript to work with Aperture, Lua is positively luminous.
Thanks again,
Bill MItchell
Maybe you are looking for
-
X120e - Recovery DVD after Fresh Install
Hi all, I ended up wiping the factory install of my x120e without making recovery disks first. Anyone know how to access the recovery partition to create a new system recovery disk? I tried double clicking the partition and there isn't anything in
-
MIRO creates a duplicate document itself during posting an invoice
Hi all, have you ever experienced that SAP created a financial posting by itself during posting of invoice? I've found out that on certain circumstances its possible. In AP process when posting an invoice(S1 entry type) in Miro AP click on "Save-post
-
Getting ORA-01403 in dba_segments query during a trigger
Hi, Everyone -- I need to set up a process which will automatically start Oracle auditing on a table when it's created on a particular tablespace. I've created an "after create on database" DDL trigger which will fire when (ORA_DICT_OBJ_TYPE = 'TABLE
-
Mercury Quicktest Pro 9.2 and Adobe AIR
Hi all, I was wondering if there is an add-in of adobe air for QTP. I tried adobe flex 3.0 qtp add-in but this didn't work with adobe air application. When I record in qtp, qtp only records window objects and the coordinates of the mouse click. Is th
-
Broken internal screen, no drop...
My laptop is my baby, i'm so careful with it. I left my laptop to go to do something else, and simply shut the screen when I opened it, there was a huge black line on the right side, and a small one going across. The screen looks perfectly fine, mean