Internal Error: Coka-Buffer not found
Hi gurus,
I am getting this error while posting documents in F-02 using CO objects.
I unable to find any solution please help me...
Thanks,
Kishore
Hi,
This might helps you in
DOCUMENT POSTING ERROR
See this,
You can use RFBIBLO program for General Ledger Postings...This will create BDC sessions if the transaction fails
Thanks,
AKL
Similar Messages
-
Internal error: Entry in COKA-Buffer not found
Hi,
In FB50 I was trying to post the following entries:
760100 (expense/cost element) Dr. 1000
100000 (petty cash account) 1000
When posting (ctrl+s) the following error appears "Internal error: Entry in COKA-Buffer not found". At this point system stops the transaction and exits from that t.code. On expanding the error the following is displayed :
"Internal error: Entry in COKA-Buffer not found
Message no. KC051
Diagnosis
The system could not find the entry with the following key in the COKA float:
Object number = AO00000000000000108166
Cost element = 760100
Origin group =
System Response
An internal error has occurred. Processing stopped.
Procedure
Notify your system administrator."
We checked the table COKA and the above mentioned object no. was not found. So how is the system displaying this particular Object nu.?
Can someone please help to solve this problem?Hi friends,
we are having the same problem with PA objects in FI transactions. Object PA in COKA is different from object PA in COEP when we are posting.
Internal Error: KC051 Buffer not found.
Issue transactions are: F-02, FBB1, F110,... but curiously transaction F-01 works OK...
Any suggestions please? We don't know what we can do... we've checked all sustitutions and validations FI/CO but we don't find anything.
Thank you in advance.
Regards. -
FB70 - Invoice posting - COKA buffer not found
Dear all
Due to unknown reason, while posting customer invoice in a specific company code for all revenue GL accounts we are getting Error message by "Internal error: Entry in COKA-Buffer not found".
We are unable to trace the source of this problem and why this is coming. we need immidiate solution for this.
This is happening only in our Development system.
Request your help, how this can be addressed.
Thanks in advance.
Best regards,
S. Haib Pasha.Hi,
Please have a look at SAP note:
Note 436046 - CO interface: Error KC051 (Entry in COKA-Buffer not found)
You can also write to SAP if you dont find the above solution appropriate.
Thanks
Aravind
Assign points if helpful -
CS4 internal error 11 Media not found, for menus?
Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal BurnerShouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio -
Internal error: Recipient address not found.return code : 80
Hi All,
I am getting this this error in sost tcode.I am facing this tcode for the first time and hence have no idea.could any one suggest why this is coming and could be the solution for this ?
Status trans.met sender recipient send date send time status text
Red mark via. inter. john - 27.08.08 15:45:00 internal error: Recipient address not found.return code : 80
Need solution urgently.Not in SCOT, If you read carefully i said,
setup the Relay Agent in your SMTP server
For example if you use MS Exchange you need to do the config there... If you ask your Mail Admin he will know what you're talking about.
Regards
Juan -
Urgent: SQLException: Internal Error: Image is not in 8.1 format
Hello there,
I have never come accross such error.
Scenario
1 using JDeveloper EA1, Database 9i (9.2.0.6)
2 calling Oracle package procedure with in/out parameters.
3 Package has been imported into jDeveloper (jPublisher) with defaults settings.
4 procedure call is successfull, but when accessing out value getting this error
Code
try{
// imported package
PailinWebPolicy webPolicy=new PailinWebPolicy(conn);
System.out.println("web issue policy");
// call of package procedure both parameters are in/out
webPolicy.issuepolicy(policyData,errors,processStatus);
System.out.println("web issue policy done");
result=processStatus[0];
System.out.println("result assigned policy length "+policyData.length);
Wtpolicycore resultPolicy=policyData[0];
System.out.println("policy data assigned");
// error at accessing getPolicyno
String policyRef =resultPolicy.getPolicydata().getPolicyno();
System.out.println("policy ref assigned");
catch(SQLException e)
System.out.println("Exception "+e);
System.out.println("Exception "+e.getErrorCode()+" state "+e.getSQLState());
opus.close();
output:
web issue policy
web issue policy done
result assigned policy length 1
policy data assigned
Exception java.sql.SQLException: Internal Error: Image is not in 8.1 format
Exception 17001 state null
Any idea what might be wrong? I dont see any error on db side at all.
ferdo
Message was edited by:
frpkooI found similar bug reported on Metalink on April 8,2005
Bug no 4294423
Getting java.sql.SQLException: Internal Error: Image is not in 8.1 format Error Code: 17001 When running JDBC program that access many User defined Types .
But cannot find out what is the status of it.
Any idea?
ferdo -
ERROR: Registry `REG_KEY_SYSTEM' not found
Hello, I installed Tuxedo 11.1.1.2.0 on Window 2008 and tried to run the simpapp program in the corba samples directory. I am getting an idl compiler error when they invoke the runme.cmd file. The error says:
idl simple.idl*
LIBORBCMD_CAT:27: ERROR: An internal software error occurred.*
-LIBORB_CAT:147: ERROR: Registry `REG_KEY_SYSTEM' not found.*
NMAKE : fatal error U1077: 'd:\oracle\tuxedo11gR1\bin\idl.EXE' : return code '0x1'*
Stop.*
Anyone have any idea what is going on here?
Fernando.
ThanksHi Fernando,
Try setting this environment variable and retry.
REG_KEY_SYSTEM=d:\oracle\tuxedo11gR1\udataobj\System.rdp
Thanks
Venkat -
I'm trying to compile a simple IDL file into C++ using idl.exe, and am seeing the
following output:
LIBORBCMD_CAT:27: ERROR: An internal software error occurred.
-LIBORB_CAT:147: ERROR: Registry `REG_KEY_SYSTEM' not found.
I'm using Tuxedo 8.1 on a Win2K platform. Is anyone able to shed any light on
this?
Regards
BrianHi Fernando,
Try setting this environment variable and retry.
REG_KEY_SYSTEM=d:\oracle\tuxedo11gR1\udataobj\System.rdp
Thanks
Venkat -
Internal error: doc.balance not zero F110
Hi All,
I need help from your side,
While doing F110 and when I see the proposal log I found there was message saying
Internal error: doc.balance not zero / comp.code XXXX vendor XXXXXXXX
Balances: 0.00 EUR / 0.00 EUR
Balances: 800 / 0.00
So can some one guide me on this.
Thanks in Advance.
Regards,
KiranI believe you are paying something in EUR which is being cleared perfectly.
However, its value in other currencies (maybe your local currency?) is not 0 because the invoice and the payment were made in different moments and you don't have configured a Payment Difference Account.
Check that configuration in OB09 to validate that your account has an account for exchange rate differences.
Otherwise, try to pay it manually through F-53 to see what the problem is.
Hope this will help.
Regards,
Fede -
Create_dynamic_table - error "Load program not found"
Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = w_excel-value .
wa_it_fldcat-datatype = 'C'.
wa_it_fldcat-inttype = wa_details-type_kind.
wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander -
RFC_ERROR_COMMUNICATION ERROR Group PUBLIC not found
I using the SAP Discovery 2004s system. When I logon to Portal using J2EE_ADMIN, then enter any tab for HR like HR admin or ESS I get the following error:
com.sap.mw.jco.JCO$Exception: (102)
RFC_ERROR_COMMUNICATION:
Connect to message server host failed Connect_PM TYPE=B MSHOST=iwdfvm2160
GROUP=PUBLIC R3NAME=ERP MSSERV=sapmsERP PCS=1 LOCATION CPIC (TCP/IP)
on local host with Unicode
ERROR Group PUBLIC not found
TIME Thu Dec 14 11:03:48 2006 RELEASE 700 COMPONENT LG VERSION 5 RC -6
MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER
I have a PUBLIC entry in SMLG and I have a valid entry in etc/services. The problem I think is with SMLG the PUBLIC entry does not have a green box under the status field. Can someone elaborate on this more?Ensure that your host file contains three entries pointing to IP addrsss of Discovery System:
<IP ADDRESS>[tab] SAPDiscoverySystem<space>iwdfvm2160<space>owdfvm2160.wdf.sap.corp
This addresses the internal file names as well as SAPDiscoverySystem. This can also be accomplished with three entrie in your company DNS but many companies do not allow out-of-domain entries.
I will modify the instructions on Prerequisites page.
Rick -
Internal error. No esid found.
Hello All,
We have a BI 7.01 (ABAP+JAVA) and a separate 7.01 Portal (Java). On BI we have several queries. When we create an Iview in the portal that points to one of these queries, we get the following error:
500 Internal Server Error
Failed to process request; contact your system administrator
The initial exception that caused the request to fail was:
Error: Internal error. No esid found.
When we do a refresh in the error window, the query results are shown as they should be (no further errors occur).
What's going on here and how do we solve this?Hi Wilbert,
Firstly - check that the communication configuration is correct in your system. You can check this using the Support Desk Tool in SAP Note 937697. If you find any RED errors mentioned in the resulting report, these need to be corrected.
If the problem still occurs, check out the following SAP Note and see if the solution given there helps.
Note: 1166422 - Error: Internal error. No esid found
In the portal,
- path Content Administration -> Portal Content
- expand tree Portal Content -> Content Provided by SAP-> Platform Add-Ons -> Business Intelligence -> iViews
In here you should NOT have any 'BEX launcher' entries. You should ONLY have 'BEX Web' entries.
Hope this helps!
Regards,
Karen -
I'm trying to run a webservice client on jdk1.5 and gives me the following error:
javax.xml.ws.WebServiceException: Provider com.sun.xml.internal.ws.spi.ProviderImpl not found
Any suggestions will be appreciated.michallis wrote:
I had this problem once on a Linux where i forgot that openJDK was installed.
openJDK doesn't contain sun packages.Great, but OpenJDK exists since Java 6 and this issue is about Java 5. jtahlborn's reply is still the relevant one. -
Hp 5535 will not scan, error message printer not found
I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.
Maybe you are looking for
-
Option key is not working on PS4, mac OS 10.6.8
Hi I'm having a problem with PhotoShop 4, the keyboard shortcut for a couple of tools is not working at all. 1) The Zoom in and out function that uses the Option Key + Shift or Option to change the Zoom in or out is not working. I'm not sure if
-
I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?
-
Duplicate record check before inserting records
Hi All I want to show an user friendly message instead of (oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key). So in my EO i have written the following code: OADBTransaction transaction = getOADBTran
-
Standby DB real time redo log apply problem
Hi all, I am using Oracle 10g to create physical standby db. In the standby db, normal archived log apply does not have problem, but when I try to use redo log real time apply and issue command SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USI
-
How to install CS4 bought for windows, now to be installed on Mac
Hi, can anyone help me? I bought CS4 Design Standard for Windows and now I need to install it on my new Mac?