Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4

Hi,
Whenever I am trying to post a GR against PO I am receiving the following error message:
Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4
I am not able to understand what this message is telling.
How to resolve. Pl suggest.
Regds
Amitava

error is because of a program bug,
fix can be found in OSS note 1015263

Similar Messages

Error while posting GR "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX

Dear Experts,
While posting GR for any non-valuated material, I am getting an error "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 0
Message no. C+099"
Kindly explore the possibilities of solution for the above error. The abve error only showing at the time of posting and not whicle Check.
Regards,
Tushar

Hi Tushar,
Your problem is happening because of the applicaiton of an SAP Note. I think PM has nothing to do with this Error. Pl. read the following (which I read this from one SAP website) & check the relevant SAP notes and take action or write to SAP for solution.
Symptom
The posting of goods receipts results in a long runtime.
Other terms
ACTUPD, MIGO, performance, material ledger
Reason and Prerequisites
The actual costing is active.
The performance problems usually occur when there are several procurement alternatives or procurement processes (tables CKMLMV001 and CKMLMV002) for certain materials.
This can be caused by implementing the modification according to Note 1017470 or 919869, [...]
Regards,
Bala.

Internal error in FORM/FUNCTION CKMC_REVALUATE_ENDING_STOCK in position 1 with RC

Hello SAP Gurus,
I am getting this error while trying to close a material in Material Ledger Cockpit
Internal error in FORM/FUNCTION CKMC_REVALUATE_ENDING_STOCK in position 1 with RC
Message no. C+099
Procedure
Please inform your system administrator.
CKMC reports no inconsistency.
Does anyone have any suggestion?
Cheers,
TD

Shipa,
Thanks for your suggestions. Thanks for taking the time to help.
I was able to resolve these issues using the following steps in our sandbox/test environments. I have also included other problems I faced in material ledger month end closing steps for the benefit of readers.
**** Caution: Do not do the following steps in production environment. You will destroy your production data irretrievably. Material Ledger is unforgiving!!! ***
1. For the materials with "Internal Error in Form/Function etc issue, I performed a CKMM in the respective plants changing for 3S to 2S and then did the same in reverse (2S to 3S). Then ran the ML close. This seems to have temporarily solved the problem.
2. I was also getting a short dump -- either during MMPV or during period close in the cockpit. The message at both times was "Error in MLCCS ...". I realized it related to Cost Component Split. I identified the company codes of the materials that caused the errors, then got all the plants within each of these company codes. I ran MLCCS_RESET and then MLCCS_Startup in SE38. Then ran MMPV/ML Close. This seems to have resolved the issues at least temporarily.
3. Occasionally I noticed some "material valuation is inconsistent in valuation area xxxx" error. I executed steps 1 and 2 above in succession. This seems to have resolved the issue temporarily.
4. There was also the issue of "duplicate entry in CKMLKEV" while performing Single/Multi-Level steps in the closing cockpit. This pointed to MLCCS. So I ran step 2 above. Again this seems to have fixed the issue temporarily.
I was able to accomplish all of these using the steps above because these were in our test environments. The reasons as to why these happened are manifold:
MMPV was not carried out for a long, long, long time in certain plants within a company code. When ML is active, it is necessary to close previous period. In cases where MMPV was not carried out for a long time, I ran CKMHELP program to set the material status to 70 for the immediately preceding posting period. This helped run the ML cockpit for the current/previous periods.
Users were processing too many transactions with unrealistically large quantities and prices resulting in overflow errors. I carried out reversal of movements for each process category to reduce the inventory balances to reasonable quantities, and ran MR21 to set the prices correctly. This helped resolve the overflow issue.
Reckless, repeated running of CKMM and MLCCS_Reset/MLCCS_Startup also contributed to these problems. Every time a standard had to be released, but the material status in ML is "30-Quantities and Values entered", would prevent users from doing that. So they resort to CKMM and then reset status using CKMHELP program to set the status to 10 and then release the new cost. It works, but wreaks havoc on ML as a whole eventually.
Hope my comments are useful for some!!!
Cheers,
TD

Internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC

Hi All,
when I try to do MFBF with reporting points I'm getting error "internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC4" can anybody give me some idea to how to comeout of this error.
Thanks and Regards
Ramana

we have contacted SAP and they have resolved the issue.
Regards
Ramana

Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 4

The order settlement terminates with the error Message no. MLCCS 099 "Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 4".
The material ledger is active. The actual cost component split is active. I want to carry out the order settlement for one plants.
With the same production material no.in the plant. There are many other productin order are settled in thid period. But, only one production order got the error message, why?
I knew that I could change the Price determ. (in material master) from 3 Single-/multi-level to 2 Activity-related, then I can continute settlement transaction in CO88. But , I want to know what's wrong this the order. What should I check about the order. Why other orders are settled without error with the same material no, and plant.
I had check about SAP note 711416 & 729901 & 523100 & 623701 & 653523, those can't slove my problem in CO88.

Thanks for your answer.
But, I have two production orders product the same material in the same plant and will be settled in this period. Both of those two orders were consumed material in 3 months ago. But, only one of them were terminated with error message in CO88. Why? How can I find out the difference between those two orders? They seems the same.
For SAP note 623701 & 871926 & 867755, I think we already implemented those. I had found program "MLCCS_KO88_TREATMENT " in SE38. And, I can find the message 013 & 015 in message class MLCCS. So, do you have other commendations?
Do you know how could I check about "Display order history" that mentioned in note 86775. Which T-code should I go to?
Thanks a lot.

KO88:Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC

hi,expert,
   When i settle production order , it issue MLCSS099 error.
   The message is ' Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 8'.
   The report 'MLCCS_KO88_TREATMENT' can not solve the problem.
   How to correct this?
Thanks for advance.
Tony

Hi Tony,
The error during the order settlement is produced because in earlier
periods the cost component split for standard price is missing
for the materials involved in the order that you are trying to settle
with KO88.
Please, change the settings in report MLCCS_KO88_TREATMENT to treatment
option "S" for this order as explained in the note 623701.
You need to delete the existing entry settings in program
MLCCS_KO88_TREATMENT first.
Afterwards, it should be possible to maintain the new settings for
period ?/2011 (treatment type 'Split Delta by S price').
Therefore, the steps should be:
1. Delete the existing entry in program MLCCS_KO88_TREATMENT
   (-> processing type: delete settings), for the company code
   and period X/XXXX.
2. Maintain option = 'Split Delta according to Standard Price,'
   with report MLCCS_KO88_TREATMENT for the orders that are causing
   the problem and period X/2011.
I hope this helps you to solve the problem.
Kind regards,
MLM

Internal error in FORM/FUNCTION get_prkexx(saplckmo) in position 10 with RC

Hi,
When we try to post good movements in MFBF, the system gives the error message C+099 which says "Internal error in FORM/FUNCTION get_prkexx(saplckmo) in position 10 with RC".
We have been implemented the sap notes which are shown below:
0001096890
0001126497
0001164684
0001230454
However, it doesn't solve our problem.
Can you please help us to solve this problem?
Thanks&Regards,
Begü

Dear,
Just debug the program and check it.
Also pls check these NOTES,
414204, 933809, 390655
Regards,
R.Brahmankar

Internal error in FORM/FUNCTION MLCCS_PLANSPLIT_READ

Hi,
While settling a Production Order we are getting the error as 'Internal error in FORM/FUNCTION MLCCS_PLANSPLIT_READ' .
I checked the routing . There are no activities for the Production order. Can any body sugest any solution for the same. Thanks in advance .
Regards
Rudra

HI,
check SAPNET notes 454084, 623701, 653523, 711416.
Best regards, Christian

Error internal error in FORM / FUNCTION MLCCS_ALTERNATIVE_ROLLUP_ACT

Dear,
At the company has changed the structure of scheme cost element. We have an error in the activity CKMLCP mult-level "internal error in FORM / FUNCTION MLCCS_ALTERNATIVE_ROLLUP_ACT" Can anyone help me solve.
Thank!
Sergio

Hi
It seems some inconsitencies happened ..
Please check for OSS Notes : Note 675828 - COMPUTE_BCD_OVERFLOW for multi-level price determination
and Note 203054 - Problems perod.mater.sttlmnt: Actual cost component split
Hope it helps..
Regards
Sarada

Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector position A with RC 1 when VL31N processing only

HI Everyone,
I have mentioned error (Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector position A with RC 1) only when I try to process IB GR in transaction VL31N.
This problem does not occur in other Material related transaction.
The Plan that we have problem was created many years ago and also ML was activated at that time.
We did not any changes to ML settings since.
I had revived followings notes:
639675 - Initialization of the actual cost component split
710808 - Activating actual cost comp split: check actual costing
584904 - MIRO: no procurement alternative/wrong price diff in ML
Seems like first one fit our problem the best, but in our cases we do not activated component split after the material ledger production startup and also we do not have such problem besides VL31N. In addition using above solution, even try, would lead to lost of historical data which we would like to avoid.
Does anyone faced similar issue and have an idea how to deal with this?
Thanks,
Rafał

Hi Felipe,
Raise an message to sap.When you are getting this dump.
Regards,
Madhu.

Error :Openning Form Function from OA page

Hi,
I have an OA page on which advance search is implemented. Result set of search having one column with hyprelink to open a form function.
In controller we are openning the form UI using using following code..
pageContext.forwardImmediatelyToForm(destination);
It is working fine and openning the form first time, while form UI is open and if we go back to OApage and click on any other link, it should refresh the same form UI with new values, but it gives error...
FRM-92050: Failed to connect to the server: /forms/formservelet:-1
Error appeares on the applet window.
Please help me in resolving this issue.
Thanks in advace. - Atal

Atal,
Not sure of any docs, but you surely can try in metalink. Moreover as the forms gets launched on 1st invocation and the error code is related to forms, I will suggest to check this issue with forms forum.
--Shiv

Internal error using XML function in procedures

Hi all,
I use the XML function in a stored procedures but when i compile these i have this error PLS-00801: internal error (74806).
The strangeness is that the single instruction launched from sql plus type
SELECT XMLElement("? xml",xmlattributes('1.0' as "version")) FROM dual; it's right.
thank.

Are you sure you don't want to use the XMLROOT functionality to achieve that?
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14200/functions225.htm
SQL> SELECT XMLROOT ( XMLType('<poid>143598</poid>'), VERSION '1.0', STANDALONE YES)
2 AS "XMLROOT" FROM DUAL;
XMLROOT
<?xml version="1.0" standalone="yes"?>
<poid>143598</poid>
SQL>

C+099 Error message: FORM/FUNCTION ckml_la_ccs_get_cost_comp in pos 10 w/ R

Dear Experts,
I am getting the C+099 Internal Error Message in Material Ledger while I am trying to run multilevel price determination. My cost component structure changed some, but I never received this message in my test system. I am receiving it in production only.
Any idea how to fix this. We are completely stock.
Thanks in advance,
Peter

Hi,
There're some SAP Notes for C099 during multi-level price determination process, if you haven't seen some SAP Notes such as 1349966 and 1408248, 1230454 for C099, please check it. It's for using multi-level or WIP revaluation or AVR, especially your case is almost to 1349966.
If it's not case, I recommend creating customer message to SAP global support immediately.
best regards, Takashi

Internal error message on my iphone

Good evening everybody,
I have a big problem on my iphone. Currently I saw two type of message on my screen :
- in french translated in english "internal error : the internal temperature of your iphone get over the maximal temperature threshold, put off it or put it in a fridge"
- in english "Internal error. The function block A1 returned the message : "L.O.L.", please contact a specialist
I am a little bit afraid about some virus, but I have no response ?
And you ?
Message was edited by: pad_pro

Solved. It was a friend's joke. He sent me some message in network notification form with a jailbreak iphone...

Stop the Internal Error Message in Fireworks CS4 or CS3

About 8 hours ago I ran into what is apparently a fairly
common problem for many people using Fireworks - the error message
that wouldn't allow me to save anything. Luckily, I paid attention
in class long enough to at least know to save my work often, so I
didn't lose much - just a basic wireframe that I threw together in
15 minutes or so. Thankfully, I tried saving when I did or this
would probably be a very tearful night for me. Instead, it's just a
long night. I can deal with that.
But, before I pat my iMac on the top of it's screen and say
"goodnight" I wanted to share with you the secret to "fixing" the
error message. Hopefully this will help those poor souls in the
future who need a little guidance from someone who's been there,
done that, and is too tired to design the t-shirt. This method will
also work on Windows machines.
I'm not saying this is guaranteed to work for you, but I'm
telling you it's worth a shot. It only requires a little of your
time to do and will hopefully be the fix you need. If it's not,
please accept my sincerest understanding of your frustration and
try another method. This fix suggests that you have added, removed,
or relocated fonts on your computer since the last time Fireworks
worked properly, however, even if you haven't done any of those
things I'd still recommend giving this a try. Here's what you do:
1. Open your favorite font manager software. I prefer the
pre-installed Font Book on the Mac, but you can use any font
manager that you want. Some good commercial font management
programs for Mac include, MasterJuggler, Suitcase Fusion, FontAgent
Pro, and Font Explorer X. For Windows you might want to try, Font
Fitting Room, X-Fonter, Suitcase for Windows, OT1 Font Manager by J
M Berthier, MainType, FontExplorer for Windows, Printer’s
Apprentice, FontAgent Pro for Windows, Typograf, or FontExpert.
Those are in no particular order, just in case you were wondering.
2. select all of your installed fonts - including your system
fonts. Run your "validate font" command for the font management
program you're using. Sit back and let it work. I had more than
6,000 fonts on my Mac, so it took a few minutes to run through all
of them.
3. Your font management program should let you know which, if
any, of your fonts are corrupt, duplicates, or otherwise
dead-weight. Chances are there will be a few if you're getting the
internal error message at start-up or save with Fireworks. You need
to delete or at least remove these fonts from the fonts folder. I
had, and I'm ashamed of this, 256 duplicates and 135 dead fonts on
my poor computer. But, in my own defense, I did just reinstall many
of the fonts a few days ago and was planning to gradually work
through them to pull out the dead/unwanted ones. I should have done
that before putting them to disc last time, but no... I wasn't
thinking.
4. once you have the fonts removed/deleted that produced
errors or warnings during the scan with your font management
program you might want to run the scan one more time just to be
sure you got everything out. If everything looks good, you can now
quit/exit the font manager.
5. here's where things will seriously divide for Windows
users and Mac users. Therefore, I'm not going to fully explain
where you need to go or how to get there for this step, but I will
provide the basics. On your computer, you need to find the folders
for fireworks that contain your preferences for the program (hint,
look in the user's appdata folders, which is hidden, for Windows or
the user's Library for Mac). Inside the preferences folder you'll
find a file that houses a list of fonts, probably called fontlist
or something very similar. Delete it. You might also wish to delete
the cache for the program preferences. Those need to be regenerated
in order for this to work.
6. Find your computer's font cache while you're looking
through the massive amounts of folders and delete the file there
too for a little added security that this will work.
7. restart your computer.
8. open Fireworks and create a new file. Save that file to
your computer in whatever format you want.
If the program opened, the file saved, and you didn't receive
that same old error message, congratulations, it worked! You may
have to re-establish your preference settings, but you shouldn't
have any other problems.
That is the best I can do this evening... or morning I
suppose it would be. Best of luck to you!
-Skip

djbroklee wrote:
> i'm on the struggle still, i've done the uninstall
reinstall thing,bought a
> font manager even though i don't go big on fonts,cleared
cahces,did
> regedits,you name it.
> the fight continues.
> as far as support from adobe they pretty much don't care
they got my thousands
> already this quarter.
> i'm thinking about a system restore now, pretty much
lost out on those last
> two days of pay and now that today is about over i have
nothing to lose if i
> can't get it fixed.
> anyone have any ideas out there?
> it's too bad i committed to adobe before accepting these
adobe type jobs.
> worst case i'll do the work on mirage until i can
finally get the quick
> background drop of fireworks again.
> i didn't pay thousands but it has never even hiccupped
no matter scripts or
> tasks i crammed into it.
> this fireworks issue sort of thing is what put me off
adobe in 2000, no
> support for issues,and wonky worksmanship.
>
> anyone have the answer thow it over to me,i could surely
use the catch up on
> getting paid thing right about now.
An update is being made to address some major problems, if
you hold
tight you might find a solution soon.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html
How To Report A Bug To Adobe
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4

Similar Messages

Maybe you are looking for