Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector position A with RC 1 when VL31N processing only
HI Everyone,
I have mentioned error (Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector position A with RC 1) only when I try to process IB GR in transaction VL31N.
This problem does not occur in other Material related transaction.
The Plan that we have problem was created many years ago and also ML was activated at that time.
We did not any changes to ML settings since.
I had revived followings notes:
639675 - Initialization of the actual cost component split
710808 - Activating actual cost comp split: check actual costing
584904 - MIRO: no procurement alternative/wrong price diff in ML
Seems like first one fit our problem the best, but in our cases we do not activated component split after the material ledger production startup and also we do not have such problem besides VL31N. In addition using above solution, even try, would lead to lost of historical data which we would like to avoid.
Does anyone faced similar issue and have an idea how to deal with this?
Thanks,
Rafał
Hi Felipe,
Raise an message to sap.When you are getting this dump.
Regards,
Madhu.
Similar Messages
-
MIGO - Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector
Hi,
When registering MIGO I am getting the following error:
Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector with RC 1
Functional area: MLCCS
nº MSG: 009
Version: ECC 6.0
I already looked at sap notes below but no one of them could help me:
584904
639675
708876
I also have tried this post but no sucess:
Could you please help me to solve it???
Thanks
FelipeHi Felipe,
Raise an message to sap.When you are getting this dump.
Regards,
Madhu. -
Internal error in FORM/FUNCTION CKMC_REVALUATE_ENDING_STOCK in position 1 with RC
Hello SAP Gurus,
I am getting this error while trying to close a material in Material Ledger Cockpit
Internal error in FORM/FUNCTION CKMC_REVALUATE_ENDING_STOCK in position 1 with RC
Message no. C+099
Procedure
Please inform your system administrator.
CKMC reports no inconsistency.
Does anyone have any suggestion?
Cheers,
TDShipa,
Thanks for your suggestions. Thanks for taking the time to help.
I was able to resolve these issues using the following steps in our sandbox/test environments. I have also included other problems I faced in material ledger month end closing steps for the benefit of readers.
**** Caution: Do not do the following steps in production environment. You will destroy your production data irretrievably. Material Ledger is unforgiving!!! ***
1. For the materials with "Internal Error in Form/Function etc issue, I performed a CKMM in the respective plants changing for 3S to 2S and then did the same in reverse (2S to 3S). Then ran the ML close. This seems to have temporarily solved the problem.
2. I was also getting a short dump -- either during MMPV or during period close in the cockpit. The message at both times was "Error in MLCCS ...". I realized it related to Cost Component Split. I identified the company codes of the materials that caused the errors, then got all the plants within each of these company codes. I ran MLCCS_RESET and then MLCCS_Startup in SE38. Then ran MMPV/ML Close. This seems to have resolved the issues at least temporarily.
3. Occasionally I noticed some "material valuation is inconsistent in valuation area xxxx" error. I executed steps 1 and 2 above in succession. This seems to have resolved the issue temporarily.
4. There was also the issue of "duplicate entry in CKMLKEV" while performing Single/Multi-Level steps in the closing cockpit. This pointed to MLCCS. So I ran step 2 above. Again this seems to have fixed the issue temporarily.
I was able to accomplish all of these using the steps above because these were in our test environments. The reasons as to why these happened are manifold:
MMPV was not carried out for a long, long, long time in certain plants within a company code. When ML is active, it is necessary to close previous period. In cases where MMPV was not carried out for a long time, I ran CKMHELP program to set the material status to 70 for the immediately preceding posting period. This helped run the ML cockpit for the current/previous periods.
Users were processing too many transactions with unrealistically large quantities and prices resulting in overflow errors. I carried out reversal of movements for each process category to reduce the inventory balances to reasonable quantities, and ran MR21 to set the prices correctly. This helped resolve the overflow issue.
Reckless, repeated running of CKMM and MLCCS_Reset/MLCCS_Startup also contributed to these problems. Every time a standard had to be released, but the material status in ML is "30-Quantities and Values entered", would prevent users from doing that. So they resort to CKMM and then reset status using CKMHELP program to set the status to 10 and then release the new cost. It works, but wreaks havoc on ML as a whole eventually.
Hope my comments are useful for some!!!
Cheers,
TD -
Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4
Hi,
Whenever I am trying to post a GR against PO I am receiving the following error message:
Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4
I am not able to understand what this message is telling.
How to resolve. Pl suggest.
Regds
Amitavaerror is because of a program bug,
fix can be found in OSS note 1015263 -
Internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC
Hi All,
when I try to do MFBF with reporting points I'm getting error "internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC4" can anybody give me some idea to how to comeout of this error.
Thanks and Regards
Ramanawe have contacted SAP and they have resolved the issue.
Regards
Ramana -
Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 4
The order settlement terminates with the error Message no. MLCCS 099 "Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 4".
The material ledger is active. The actual cost component split is active. I want to carry out the order settlement for one plants.
With the same production material no.in the plant. There are many other productin order are settled in thid period. But, only one production order got the error message, why?
I knew that I could change the Price determ. (in material master) from 3 Single-/multi-level to 2 Activity-related, then I can continute settlement transaction in CO88. But , I want to know what's wrong this the order. What should I check about the order. Why other orders are settled without error with the same material no, and plant.
I had check about SAP note 711416 & 729901 & 523100 & 623701 & 653523, those can't slove my problem in CO88.Thanks for your answer.
But, I have two production orders product the same material in the same plant and will be settled in this period. Both of those two orders were consumed material in 3 months ago. But, only one of them were terminated with error message in CO88. Why? How can I find out the difference between those two orders? They seems the same.
For SAP note 623701 & 871926 & 867755, I think we already implemented those. I had found program "MLCCS_KO88_TREATMENT " in SE38. And, I can find the message 013 & 015 in message class MLCCS. So, do you have other commendations?
Do you know how could I check about "Display order history" that mentioned in note 86775. Which T-code should I go to?
Thanks a lot. -
KO88:Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC
hi,expert,
When i settle production order , it issue MLCSS099 error.
The message is ' Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 8'.
The report 'MLCCS_KO88_TREATMENT' can not solve the problem.
How to correct this?
Thanks for advance.
TonyHi Tony,
The error during the order settlement is produced because in earlier
periods the cost component split for standard price is missing
for the materials involved in the order that you are trying to settle
with KO88.
Please, change the settings in report MLCCS_KO88_TREATMENT to treatment
option "S" for this order as explained in the note 623701.
You need to delete the existing entry settings in program
MLCCS_KO88_TREATMENT first.
Afterwards, it should be possible to maintain the new settings for
period ?/2011 (treatment type 'Split Delta by S price').
Therefore, the steps should be:
1. Delete the existing entry in program MLCCS_KO88_TREATMENT
(-> processing type: delete settings), for the company code
and period X/XXXX.
2. Maintain option = 'Split Delta according to Standard Price,'
with report MLCCS_KO88_TREATMENT for the orders that are causing
the problem and period X/2011.
I hope this helps you to solve the problem.
Kind regards,
MLM -
Warning An internal error has occurred in method getMarkup()
Hi,
I have created simple portlet using Oracle JDeveloper and it is deployed to OAS 10.1.3, When I register wsrp provider to Oracle as portal 10.2.1 and add portlet to some page, then on page is shown following error: "Error: Could not get markup. The cookie or session is invalid or there is a runtime exception."
In the same time is to oas 10.1.3 log writted warning: ">An internal error has occurred in method getMarkup()"
What is wrong?
ThanksI am encountering the same error as you were facing.Did you get any resolution on this issue?If yes,can you please pass on the require stuff as soon as possible.I need to crack this as quickly as possible so any help in this regard would be very useful.Thanks
-Arindam
mail to:[email protected] -
Internal error int reply to ClientHello on ACE20 module with end-to-end SSL
Hello, world!
We have weird behaviour of our Cisco ACE20 module configured for end-to-end SSL (initiation+termination) - the module from time to time replies with SSLv3/TLSv1 alert "Fatal: internal error" message to the client right after client have sent 'ClientHello' SSL message. So sometimes SSL connection works and sometimes will be immediately closed due to this fatal error. The behaviour is very similar to the one described below:
CSCtc52085—After a client sends a ClientHello message, the SSL hand shake may fail with a fatal alert internal error sent by the ACE. This behavior is intermittent and may occur under the following conditions:
1. An SSL service is configured with the session-cache timeout command (session reuse).
2. SSL connections are aborted by the client after the client sends a ClientHello message to the service in condition 1 and before an internal resource state is changed. This behavior puts the internal resource in an improper state. This error is very timing sensitive.
3. The next connection that uses the internal resource in the improper state fails with a fatal alert internal error. That connection does not have to go to the service in condition 1 to experience this error because the internal resource is shared by all the SSL services.
Workaround: None.
But we have software version A2(3.1) and this bug must have been resolved in this release (at least it's listed in resolved caveats section of release notes).
Software
loader: Version 12.2[123]
system: Version A2(3.1) [build 3.0(0)A2(3.1)]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_3_1.bin
Again, we don't have session-cache timeout configured on the ACE.
On the ACE we have following stats:
ACE1/VC_UNIX# sh stats crypto server
SSL Server Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 1
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 2
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 16
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 68
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 68
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 33
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 68
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 0
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 0
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 0
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 27
Handshake FlushRX operations: 0
Handshake FlushTX operations: 0
Xscale messages rcvd from ME: 1313330
Xscale messages sent to ME: 2041768
Finish msg split across ssl recs: 0
Fasttx msg ring full: 0
SSL_ME tx msg ring full: 0
N2 encrypt_record: 0
N2 decrypt_record: 144433
N2 random: 439915
N2 handshake_hash: 878094
N2 hash: 0
N2 gpop_master: 291164
N2 gpop_import_master_secret: 5
N2 gpop_pkcs1v15enc: 144430
N2 gpop_pkcs1v15enc_crt: 0
N2 gpop_finish: 291140
N2 gpop_verify: 0
N2 gpop_pkcs1v15dec: 0
N2 gpop_pkcs1v15dec_crt: 146752
N2 rsa_server_full: 15
N2 resume: 12
UXP A: 24576
UXP B: 0
The "Internal error" counter increases with failed connections.
Printscreen from wireshark attached.
Maybe someone has the problem like ours? I have no idea how to troubleshoot these "internal errors"... :-(
Thanks for your replies.Thanks for your reply.
The problem is not server-related, I have exactly the same situation if I do SSL termination only, with unencrypted connection between ACE and backend servers (another servers, with blank apache installed and listening on 443 port for non-SSL traffic) - generally speaking, it works, but often with these "internal errors" - not suitable for production.
Here is the output from the commands
# show np 1 me-stats -E0
SSL Server Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 0
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 0
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 0
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 0
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 0
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 0
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 0
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 0
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 0
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 0
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 0
SSL Client Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 4108
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 63355
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 37662
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 0
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 4062020
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 4015344
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 0
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 4062020
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 4059147
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 4059888
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 20380
Handshake FlushRX operations: 0
Handshake FlushTX operations: 0
Xscale messages rcvd from ME: 12092768
Xscale messages sent to ME: 0x0176adac
Finish msg split across ssl recs: 0
Fasttx msg ring full: 0
SSL_ME tx msg ring full: 0
N2 encrypt_record: 0
N2 decrypt_record: 4015344
N2 random: 8148797
N2 handshake_hash: 4322635
N2 hash: 0
N2 gpop_master: 4041700
N2 gpop_import_master_secret: 0
N2 gpop_pkcs1v15enc: 4041700
N2 gpop_pkcs1v15enc_crt: 0
N2 gpop_finish: 4031710
N2 gpop_verify: 0
N2 gpop_pkcs1v15dec: 0
N2 gpop_pkcs1v15dec_crt: 0
N2 rsa_server_full: 0
N2 resume: 0
UXP A: 24576
UXP B: 0
# show np 1 me-stats "-shttp -v"
HTTP Statistics (Current)
Unknown msgs received: 0 0
Data rx msgs received: 288293958 4
TCP proxy rx msgs received: 9816884 1
Ack trigger rx msgs received: 0 0
TCP event rx msgs received: 52961189 2
Dest decision tx msgs received: 55155089 1
LB dest decision tx msgs received: 0 0
Close tx msgs received: 83942817 0
Inspect allow tx msgs received: 0 0
Inspect drop tx msgs received: 0 0
DRAM blocks read: 577612022 16
Buffers dropped: 2702255 0
Regex states read: 38438408 25
Unproxy cancellations: 0 0
Redundant closes: 2990271 0
Internal errors: 0 0
Conn mismatch errors: 2748628 0
Exception with close: 6 0
Dest errors: 1 0
Total Packet count (Tx & Rx): 490169937 8
Stop regex: 12 0
(Context 5 Statistics)
Parse result LB msgs sent: 121180 0
Drop: LB queue full: 0 0
Parse result Inspect msgs sent: 0 0
Drop: Inspect queue full: 0 0
TCP data msgs sent: 96215 0
TCP queue full: 0 0
SSL data msgs sent: 516306 0
SSL queue full: 0 0
TCP fin msgs sent: 939 0
TCP rst msgs sent: 147 0
SSL fin msgs sent: 102907 0
SSL rst msgs sent: 38548 0
Bounced fin msgs sent: 1481 0
Bounced rst msgs sent: 2 0
Unproxy msgs sent: 25333 0
Drain msgs sent: 113966 0
Reuse msgs sent: 2304 0
Particles read: 1448314 0
HTTP requests: 121688 0
Reproxied requests: 17680 0
Headers inserted: 3825 0
Headers removed: 51 0
Headers rewritten: 0 0
HTTP redirects: 0 0
HTTP chunks: 42154 0
Unproxy conns: 25325 0
Pipelined requests: 0 0
Pipeline flushes: 0 0
Whitespace appends: 0 0
Response entries recycled: 24493 0
Second pass parsing: 0 0
Vserver mismatch errors: 5 0
Analysis errors: 0 0
Static parse errors: 20 0
Max parselen errors: 0 0
Resource errors: 75 0
Invalid path errors: 0 0
Bad HTTP version errors: 0 0
Header insert errors: 75 0
Header rewrite errors: 0 0
Invalid policy errors: 0 0
Invalid rserver errors: 0 0
Recycled requests: 0 0
SSL header insert success: 0 0
SSL header insert errors: 0 0
SSL spoof header deleted: 0 0
Drop: RST pipelined request: 0 0
There's nothing in ACE logs.
Forgot to mention - we are running ACE in one-arm mode, but I don't believe it makes a difference. -
I am getting an error message with my iPhone whenever I try to access my data with no wifi. It says "could not activate cellular data network". This just started today and has never happened before. Did I change a setting or something?
Hello, romac12.
Thank you for visiting Apple Support Communities.
I have experienced this issue before. If there have been any changes to your cellular account such as adding a line, plan change or upgrade, more than likely there is a provisioning issue on the carrier end. However, I would recommend going through the troubleshooting steps in the article below. If the issue persists, see step 9.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
Jason H. -
Error while posting GR "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX
Dear Experts,
While posting GR for any non-valuated material, I am getting an error "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 0
Message no. C+099"
Kindly explore the possibilities of solution for the above error. The abve error only showing at the time of posting and not whicle Check.
Regards,
TusharHi Tushar,
Your problem is happening because of the applicaiton of an SAP Note. I think PM has nothing to do with this Error. Pl. read the following (which I read this from one SAP website) & check the relevant SAP notes and take action or write to SAP for solution.
Symptom
The posting of goods receipts results in a long runtime.
Other terms
ACTUPD, MIGO, performance, material ledger
Reason and Prerequisites
The actual costing is active.
The performance problems usually occur when there are several procurement alternatives or procurement processes (tables CKMLMV001 and CKMLMV002) for certain materials.
This can be caused by implementing the modification according to Note 1017470 or 919869, [...]
Regards,
Bala. -
16: The transport tool terminated due to an internal error(transport req)
Hi friends,
i created one transport request for transporting custom appset to quality system.
while importing in quality i'm getting request in red color. checked log:
Unexpected EOF after 88079651 bytes
Ended with return code: ===> 16 <===
16: The transport tool terminated due to an internal error.
we intially transported Non BPC cubes, along with that infoarea name(/cpmb/bpc) came. But i'm able to see several /cpmb/xx infoobjects. I manually moved from infoarea(/CPMB/BPC) to other infoarea(ybpc) with new request in quality. next i'm trying to delete /cpmb/xx infoobejcts through one program(around 700 infoobjects are exists). can i use ujt_content_activate program to delete contents of appset, if i use that program what i have to mention in content version field? can anyone eloborate usage of ujs_activate_content? we are on bpc75nw sp04
any suggestions pls to import request correctly.
thanks,continution to above question. sequence of things happend in our side.
Few BW cubes(not bpc), which are getting data from bpc applications(bpc cubes) via APD are transported. Imported to quality succesfully.
Next transferred around 5 BADIs(classes & enhancement implementations) to quality system, which were written for moving data among bpc applications as well for few calculations in plng applications. Succefully imported into quality system and checked respecive BADIs.
Next trying to transport custom appset. while importing facing above problem. Followed SAP how-to guides/methods.
any suggestions pls. -
General internal error from EncryptedLocalStore
I got this error:
Error: general internal error
at flash.data::EncryptedLocalStore$/processErrorCode()
at flash.data::EncryptedLocalStore$/getItem()
when trying to call EncryptedLocalStore.getItem("myItem")
the item does not exist, but the doc says - in that case -
the method returns null.
I get this behavior since I called
EncryptedLocalStore.reset() on a previous interaction.
Any help?
ps: Get the error on 4 different settings: mac 10.5.1 (with
flex 3 beta and final) and winxp sp2 (with flex 3 beta and
final).If you compile you app with -verbose-stacktraces=true, it
should show you a more detailed stack trace.
If you a small test case, please submit a bug at
http://bugs.adobe.com/flex
Thanks,
Gaurav -
OWB internal error ProcessPackageGenerator
We are running OWB 9.2.0.4 on Oracle 9.2.0.5 running Windows 2000 Advanced Server. We have been working fine for several weeks. Today, several of our process flows fail to deploy with the following error:
====================================================
OWB Error
oracle.wh.repos.sdk.exceptions.WBException: Internal Error: ProcessPackageGenerator.generate
WBGeneratedObject([] is null or length 0 for PPCT_PKG
=====================================================
When I click on the Detail button the following text is displayed:
=======================================================
oracle.wh.repos.sdk.exceptions.WBException: Internal Error: ProcessPackageGenerator.generate WBGeneratedObject[] is null or length 0 for PPCT_PKG
oracle.wh.repos.sdk.exceptions.WBException: Internal Error: ProcessPackageGenerator.generate WBGeneratedObject[] is null or length 0 for PPCT_PKG
at oracle.wh.ui.runtime.application.WHRuntimeProgress.notifyInternalError(WHRuntimeProgress.java:180)
at oracle.wh.ui.runtime.application.WHRuntimeGeneration.run(WHRuntimeGeneration.java:98)
\nCMPException message and stack trace:\njava.lang.Exception: Internal Error: ProcessPackageGenerator.generate WBGeneratedObject[] is null or length 0 for PPCT_PKG
at oracle.wh.service.impl.runtime.generation.ProcessPackageGenerator.generate(ProcessPackageGenerator.java:123)
at oracle.wh.service.impl.runtime.generation.ProcessPackageGenerator.generateProcessPackage(ProcessPackageGenerator.java:451)
at oracle.wh.service.impl.runtime.generation.ProcessPackageGenerator.generate(ProcessPackageGenerator.java:97)
at oracle.wh.service.impl.runtime.generation.DeploymentGenerator.generate(DeploymentGenerator.java:75)
at oracle.wh.service.impl.runtime.UnitControllerImpl.defineUnit(UnitControllerImpl.java:130)
at oracle.wh.service.impl.runtime.UnitControllerImpl.<init>(UnitControllerImpl.java:78)
at oracle.wh.service.impl.runtime.DeploymentControllerImpl.defineControllerList(DeploymentControllerImpl.java:249)
at oracle.wh.service.impl.runtime.DeploymentControllerImpl.<init>(DeploymentControllerImpl.java:50)
at oracle.wh.service.impl.runtime.DeploymentSpecificationImpl.createController(DeploymentSpecificationImpl.java:395)
at oracle.wh.ui.runtime.application.WHRuntimeGeneration.run(WHRuntimeGeneration.java:86)Hi Ed,
Sadly that's pretty much what I did at the moment: I had to manually rebuild all dimension/fact tables that were affected by that small change. I tried to contact oracle support and posted these same messages on the Metalink but didn't get too far that way.
The thing is that I'm having the same problem now: I changed a dimension attribute datatype from VARCHAR2 to INTEGER and stumbled upon the same situation, which, at this point in the development process, freaked me out. The affected dimension and related cubes were invalidated by this change. I then changed the datatype from INTEGER to NUMBER and everything seems to be working properly.
I know this is not much help. I haven't been able to find a root cause for this behavior, which, strangely enough, nobody else seems to be experiencing.
If I happen to find anything on this, I'll let you know.
Regards,
--osvaldo.
[osantos] -
EREC: Internal Error while logging in using Registered External Candidate
Hi,
We are on ECC 6.0 EHP 5 & ERECRUIT 605 (0005) and EP 7.0 SP22.
I'm on the final stages of config on Production system for eRec applications, all works fine and ready for LIVE except the below functionality:
1. i've registered 2 uses as external candidates using the external url
2. when trying to login with that user, it throws internal error - this kind of issue didn't happen in DEV/QAS.
when i've checked the SLG1 below came:
Serious error; see log
The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
The user is not assigned a candidate or an employee
The error occurred in program CL_HRRCF_START_A==============CM007 line 19
The user is not assigned a candidate or an employee - this message didn't make me any sense as its the external candidate who is logging into the system.
Then i've checked that user by running the HRALXSYNC >User: 455DC84C411 > F8. This gave me below errors:
Determination of connections to object 'CP' of 'US' '455DC84C411' failed
User 455DC84C411 is not integrated in the organizational model
This kind of issue didn't repeated while I was configuring the DEV and QAS system, why i'm getting this only in PRD?
Awaiting for valuable inputs.
Thanks,
MSHi,
I do not really understand what you expect from report HRALXSYNC. This report has nothing to do with the external candidates.
A common issue when things on the production system are not working like on dev / qs are insufficient authorization tests. So you should check the authorization trace for the sevice user wich is defined in the external alias for the external candidate registration ICF service. Furthermore checking the NA, CP, BP, US objects and the relations between them can help analyse authorization problems on the object creation.
Rgds.
Roman
Maybe you are looking for
-
Hello, My phone is running really slow after a few app downloads. I read I should archive the apps (to sd-card), but since I have downloaded latest version of App World I cant find the 'archive' button no more in the menu of the applications. Could s
-
How do I get new feature requests into oracle? My main request, is an overhaul of the OEM homepage - Auto Refereshing set on, and geared more around the critical alerts and warnings, plus performance information. As it is there isn't a single page I
-
HT4993 how I can connect my Iphone 5 and my hand free Jabra cruiser2?
How I can connect my hand free Jabra cruise 2 with my Iphone 5?
-
BGP4 Session Goes Down receiving FULL Routers from providers
BGP4 Session Goes Down receiving FULL Routers from providers CONF router bgp 22999 no synchronization bgp log-neighbor-changes bgp maxas-limit 254 network 196.12.173.0 aggregate-address 196.12.173.0 255.255.255.0 summary-only neighbor 64.247.171.17 r
-
Hi all, I'm using BPC 7.0 MS version and I have created a very simple BPF. The first step of the BPF opens a report from BPC for excel. When I create the BPF I get no errors. The detail of the action I have set in the BPF is: Interface: BPC for Excel