Internal error in program SAPLRSDRS and method WRITE_DDIC_INFO-6-?
Hi All,
When i load data from self system to the targets i got an error message "Internal error in program SAPLRSDRS and method WRITE_DDIC_INFO-6-"...
could any body help me to resolve this type of issues.
Thanks in advance.
Thanks,
Vachan
No this is not a short dump message...these error message i am seeing the error message in the monitor...in the detail tab extraction 'Error occurred in the data selection " and then there is no trfcs and idocs processing and even processing also not happened.
thanks ,
Vachan
Similar Messages
-
Internal error in program CL_RSDD_VCUBE and method GET_SID-8-)
Hi
I am getting the (Internal error in program CL_RSDD_VCUBE and method GET_SID-8-) this error while running the query on remote cube.
Source system is oracle.
We are trying to access the data in reports from oracle by using UD COnnect.
When i ran the report on the remote cube i am getting the above error
we are using bw 3.5 system patch level 15
Please help me out .
Thanks
SirishaCheck OSS note 702068.
also see this thread..
Re: Query Error (CL_RSDD_VCUBE ...) -
Error while executing tcode FSE2 "Internal error in program SAPLFIBS no 5"
I am getting below error which while trying to execute tcode FSE2 (Financial statement version). Can't able even go inside the tcode. Please tell how to solve this.
"Internal error in program SAPLFIBS number 5"Hi Dsr,
Use transaction code <b>OB58</b>->Highlight the Fin. Stmt. version you want to Change and click on the <b>Display</b> icon.->Next, click on the "<b>Fin.Statement items</b>" icon on the application tool bar. You can then expand and carry out your update as appropriate.
If you do not have the prerequisite authorisations, you wouldn't be able to do this.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob -
Hi Experts,
We are migrating workbooks from 3.x to BI 7. While opening the workboon from BI 7 Analyzer we are getting the following System Error and Disconnecting from BW server.
'Program Error in class SAPMSSY1 method UNCAUGHT_EXCEPTION. System error in program CL_RSR_XLS_VIEW and from ASSIGN_QUERY_2_DP03'."
We are at support pack level 17 and GUI - 710 with patch level 8.
If you have experienced with the above errors. Please respond.
Thanks
DBHi Naveen,
In migration you will get all these errors related to Front end. First save the Existing 3.x workbook so that the old version of the workbook will be saved into new Excel version (2003). now try to migrate the workbook , this time you will not get this error.
The root cause for this problem would be all your workbboks have been created erlier in very old version of Excel.
Thanks
DB -
System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01
Hi All,
I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
<i>The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
When I execute Querys that are on Infoproviders, everything is ok.
Any Idea??
Thnks a lot!!!
Yolanda.Hi,
Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
1. Agg level is active
2. Check the query (option is available on query designer)
thanks -
System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02
Hello experts,
I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
Thanks
Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.You may wish to check this
Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
Hopeit Helps
Chetan
@CP.. -
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani. -
System error in program CL_RSR and form GET_CHANMID-02-
System error in program CL_RSR and form GET_CHANMID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I got this error in SCM IDES 7.0, Planning Area Initialization and Display MPOS...Please help me...Hi,
One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
System error in program CL_RSR and form GET_CHANM-01
Please advice as this is very critical.
Thanks,
Tintu -
MIRO : Internal error in program SAPLEINR in position L014 (RC = 4)
Hi Gurus,
I have got a problem with MIRO.
When i provide 'test' in Reference field and PO number in PO Reference tab i am getting error message saying
"Internal error in program SAPLEINR in position L014 (RC = 4)".
What could be the reason for this error message and solution if any?
Thanks in Advance!
Pavan.Hi Pavan,
I take it the error message number is C+509?
This error is usually caused by inconsistencies between table EKPO and KONV. Check out note 205723 and implement the
report ZKORKONV, you might want to run it in test mode first with the flag db_upd unchecked.
Hope this helps,
Adam. -
Symtex error in program CL_RSR_RRKO_PARTITION and form CHECK_QCUBE-01-
Hello Guru,
I am getting the following error while doing any changes in a workbook in Bex analyzer:
An error occured in the communication with BW server.
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
Symtex error in program CL_RSR_RRKO_PARTITION and form CHECK_QCUBE-01-
Due to the above error I can not save the data in my workbook .
Please give some solution.
Thanks in advance.
With regards,
AnandHello Raj,
Thanks for your promt reply.
I am getting the following error. Please let me know what is the solution
Syntax error
Description
Program %_JJ_TEASTFRAME_CLASS
Type " TN_KEYFL" is unknown.
Thanks in advance.
With regards,
Anand -
Hello together,
when we try to change the display setting of a charactrestic in BEx, for example from "display as key" to "display as key and text" we get the following error message:
"Abort system error in program CL_RSR_GRID and form FILL_AXIS_SETXX_LINE:TXT_N_M"
and BEx looses server connection.
Does anybody know what the problem is and how to solve it?
Thank you very much
JohannesHi Johannes,
Thanks for the immediate reply.
I receive the following error when I tried to find the note.
"The requested SAP Note is either in reworking or is released internally only"
Regards,
Sriram -
HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
HarikaDear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini -
Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
AnuragHello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha -
Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumarHi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr -
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error
Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on thisI don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone.
Maybe you are looking for
-
Problem occurs with all add-ons disabled, and in safe mode.
-
Is it possible to change the port number of an already installed ITS?
Hello, I've done an install of the latest ITS stand-alone application (win2k server , IIS). It was installed on port 81. Is there an easy way to change the port number of this ITS installation without doing a new install? I know there are port refere
-
Microsoft Security Bulletin MS14-045 - Important "Microsoft strongly recommends that customers who have not uninstalled the 2982791 update do so prior to applying the 2993651 update." Most of our PCs are set to automatically install updates. If the
-
Graphic glitch at boot since installing ML. Any clue why?
Since installing Mountain Lion on my late 2011 MBP I have been experiencing graphic glitches every once and a while. The one thing that has stayed consistent is the glitch when I boot up. I get big square blocks that come up as I boot. (Pictured abov
-
Help please! Just got my MacBook Pro back from replacing logic board and when I try to sync my iPhone the sync apps options are all greyed out. There is a check in the sync apps box but it is grey. I am unable to sync the apps and cannot make any cha