Internal Error in Search for Candidate in Talent Pool in E-Recruitment

Hi All,
I've problem in Search in Candidates in Talent Pool in E-Recruitment in SAP E-Recruitment. When I search with text, it just gives internal error. I digged into the BSP Application as well. In the funtion call "SDOK_INDEX_COMBINED_SEARCH_XML" returns error "document area not specified" and raises an internal error. Anyone faced similar issue??? Please Help!!!
Thx,
Anand

Well, obviously you never used any component of KPRO yet.
Just upload an attachment onto the candidate's profile.
An index category should automatically be created.
Also generate search profiles and plan the periodical service RCF_PERIODICAL_SERVICES. You can find the documentation about this report and search profile via IMG.
Also look if HR_KW is checked within transaction SKPR06.
Message was edited by: Sebastian Menger

Similar Messages

E-Recruiting Search functionality for Candidate in Talent Pool

For search functionality of candidates in the talent pool, does anyone have any idea how the ranking percentage is calculated?? There is no clear documentation out there about what factors are used and how they are weighted. I am aware that additional ranking that can be defined in the configuration and also questionaire results can influence this ranking as well.
However, in the absence of this additional ranking in talent management and questionaire results to job postings, are the selection criteria for the search the only items taken into account for calculation for this ranking percentage?
What is everyone else's experiences in the fact that search functionality tends to treat the various selection criteria as 'OR' conditions? The client I am working for is unhappy that candidates who don't match every set of selection criteria are being displayed on the hitlist. Would like to hear what other client's responses has been to this...
Sandra

Had directed this question to SAP and did not get an adequate response to date with regards to how ranking is calculated.
However, SAP did respond to why search functionality treating the various selection criteria as 'OR' conditions for searching candidates in Talent Pool. This is due to configuration values in tables T77RCF_SRCH_ATTC and T77RCF_SRCH_ATTR. The field RANKING must be set to blank value. SAP delivers this as 'X' - ranking percentage is calculated. This change now makes the combination of various selection criteria elements as 'AND' conditions, and the ranking percentage is no longer displayed.
Sandra

E-RECRUITING OPEN SEARCH FOR CANDIDATE RECEIVING MULTIPLE ERROR LOGS IN SLG

E-Recruiting Netweaver 7.0 separate system
Non XI R3 system for HR
CL_HRRCF_CANDIDATE_ADMIN_BL error in search results
Hello,
Within the "Search for Candidates" page, when doing an open search, we only receive one candidate. Also with transaction code SLG1 there are multiple error logs stating that a candidate could not be found.
What does the error message mean and how do we resolve what is causing them? If resolved will we get a full open search within the "Search for Candidates" page?
Specific error: No candidate could be found for NA 50003803.
The error occurred in program CL_HRRCF_CANDIDATE============CM003 line 345.
Error class: CX_HRRCF_MAINTAIN_OBJECT
Appreciate any help,
Cindy

I have solved this issue.
Pass the logon data to the service for the external candidate registration
Do the indexing and configuire the SES objects and index as well.
Configure the missing entries in the serach profile/templates

E-rec Errors in search of candidates in e-Recruiting portal and transactio

Hi, please need help to:
1. In e-Recruiting portal under the tab "recruiter":
"Services-Candidates-Search for candidates" running "Search button" and are 3 internal error (no detail of the error).
If we ignore the errors and rerun the "Search button" then we appear 1 internal error and a message that "No data available", but we know that there are candidates in the SAP R / 3.
2. When we execute the transaction SLG1 in SAP R / 3 are the following errors:
Fatal error, see log
An exception has been detected in e-Recruiting.
An exception has been detected in relation to the search mask
Technical Details
error ID: 3C466BE84D30748BE10000000A1145AF
Class of error: CX_HRRCF_SEARCH_MASK
context error: CX_HRRCF_SEARCH_MASK
Error in the program emerged
CL_HRRCF_SEARCH_MASK_GROUP====CM003 line 40
An exception has been detected in e-Recruiting.
CL_HRRCF_SEARCH_MASK_GROUP====CPCL_HRRCF_SEARCH_MASK_GROUP====CM00340
Technical Details
error ID: 3C466BE84D30748BE10000000A1145AF
Class of error: CX_HRRCF_SEARCH_MASK
context error: CX_HRRCF_SEARCH_MASK
Thanks.

Thanks Shane LaBonte,
Package Bussines. We have the following installed:
RECRUIT 1.40 for BP ERP Recruiter
ADMIN RECRUITING BP 1.40 for ERP Administrator Functionality
ERP05 BP 1.41 COMMON PARTS
MSS ERP05 BP for Manager Self Service 1.41
ESS ERP05 BP for Employee Self Service 1.41
We have activated 4. (we EHP4)
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_SES_1
Is there anything else we should take account?
Regard

Errors in search of candidates in e-Recruiting portal and transaction SLG1

Hi, please need help to:
1. In e-Recruiting portal under the tab "recruiter":
"Services-Candidates-Search for candidates" running "Search button" and are 3 internal error (no detail of the error).
If we ignore the errors and rerun the "Search button" then we appear 1 internal error and a message that "No data available", but we know that there are candidates in the SAP R / 3.
2. When we execute the transaction SLG1 in SAP R / 3 are the following errors:
Fatal error, see log
An exception has been detected in e-Recruiting.
    An exception has been detected in relation to the search mask
Technical Details
    error ID: 3C466BE84D30748BE10000000A1145AF
    Class of error: CX_HRRCF_SEARCH_MASK
    context error: CX_HRRCF_SEARCH_MASK
Error in the program emerged
CL_HRRCF_SEARCH_MASK_GROUP====CM003 line 40
An exception has been detected in e-Recruiting.
CL_HRRCF_SEARCH_MASK_GROUP====CPCL_HRRCF_SEARCH_MASK_GROUP====CM00340
Technical Details
    error ID: 3C466BE84D30748BE10000000A1145AF
    Class of error: CX_HRRCF_SEARCH_MASK
    context error: CX_HRRCF_SEARCH_MASK
Thanks.

Hi
Sorry, This is a SAP Business One Forum.
Please, move your thread on next link or Category [SAP Solutions|/community [original link is broken];
Thanks,
Felipe Loyola

Error during search for movement type (953)

Hi All,
When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwin

when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers > define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types

Error during search for WM movement type (999 E )

Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arif

Hi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari

Error during search for WM movement type (911)

Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advance

The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

API5072: Internal Error: Null message for exception

OWB 11.1.0.6 on Database 11.1.0.6
Suddenly i am getting this internal error while saving.... Can't save the work please help!!!!
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.jcommon.CommonUtils.error(CommonUtils.java:298)
     at oracle.wh.ui.console.commands.CommitCmd.performAction(CommitCmd.java:27)
     at oracle.wh.ui.editor.WindowHelpEventHandler.handleSaveAll(WindowHelpEventHandler.java:239)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.wh.ui.editor.listener.ReflectListener.invokeMethod(ReflectListener.java:41)
     at oracle.wh.ui.editor.listener.ReflectActionListener.actionPerformed(ReflectActionListener.java:33)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5501)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3968)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1778)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Hi,
Thsi is the famous NULL pointer exeption. There may be multiple reasons for it and sometime it may also happen beacuse of lost connection to DB, instance may have gone off etc...You cannot retrive the work back as far as i know when u strike this error.
Plz save ur work after every change or operator u put into the mapping as a safety precausion.
Regards,
Bharath

Error during search for WM movement type (652 1 L )

Hi Guys,
For return order,we have created return delivery and PGR,Material Doc was created in the background TR and TO also created.Confirmed the TO.
Now we trying to reverse the PGR and Delivery from Transaction VL09,we are getting the following error.
Error during search for WM movement type (652 1 L )
Please reply ASAP,it's very urgent
Regards,
Kiran

insert this entry, it will work.
regards,
Yu

WM-Error during search for WM movement type (261 )

HI FRIENDS
I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
PLS SUGGEST ME TO SOLVE THIS ISSUE
Error during search for WM movement type (261 )
Message no. L9 005
Diagnosis
A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
WIHT REGARDS
DINESH

Hi,
The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261 and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
And also .....
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you.

Internal error while clicking on Candidate search from Recruiter role-EHP4

Hi
We are getting intrnal error while clicking on candidate search or any search option from recruiter log on after upgrading to EHP4.
after doing analysis through SLG1, we found below issues.
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH_MASK_GROUP====CM009 line 41
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00P line 676
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00R line 18
Customizing table T77RCF_SPT contains no corresponding entry for Business Object =/
The error occurred in program CL_HRRCF_SPT_CUST_TABS========CM00E line 26
We searched in SDN and got one threads with similar kind of errors. As mentioned in the thread, we have activated below items.
1. HCM_ERC_SES_1-activated
2. Customizing table T77RCF_SPT maintained with required information
3. Run report RCF_PERIODICAL_SERVICES to update table T77RCF_INT_PUB.
Still we are getting error as mentioned above. Can anybody help on this?
Regards,
Purnima

Dear Purnima,
You should have a look at it in client 000. This is where you can find the table entries how they are shipped with SAP. Problem is that this is the search customizing and if we have other customizing entries in our system they don't suit to your system because I found one different entry in table V77RCF_SMG_NAVI. Please can you check out all tables and compare them with your client 000? (all tables in IMG candidate search > search profile and search templates).
Hope it helps,
Regards
Christine

Error - 21007 Search for table returned error - can't find data source??

I am using an Oracle thin driver through a BI JDBC system. The system connects fine when testing in my 2004s portal. It also worked fine in VC and I was able to browse tables and views in the Oracle db. Suddenly it has stopped working. When trying to search for a table in VC it returns the error message above.
The only thing I have changed is the "enable SQL editor" setting in Visual Admin which has been set to true. Changing this back to false has no effect, so I can't see that this should cause the problem.
Henning

Dear Henning,
Do you solve this case?.
Best regards,

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Internal Error in Search for Candidate in Talent Pool in E-Recruitment

Similar Messages

Maybe you are looking for