Internal error: Recipient address not found.return code : 80

Hi All,
I am getting this this error in sost tcode.I am facing this tcode for the first time and hence have no idea.could any one suggest why this is coming and could be the solution for this ?
Status trans.met sender recipient send date send time status text
Red mark via. inter. john - 27.08.08 15:45:00 internal error: Recipient address not found.return code : 80
Need solution urgently.

Not in SCOT, If you read carefully i said,
setup the Relay Agent in your SMTP server
For example if you use MS Exchange you need to do the config there... If you ask your Mail Admin he will know what you're talking about.
Regards
Juan

Similar Messages

CS4 internal error 11 Media not found, for menus?

Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal Burner

Shouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio

Internal Error: Coka-Buffer not found

Hi gurus,
I am getting this error while posting documents in F-02 using CO objects.
I unable to find any solution please help me...
Thanks,
Kishore

Hi,
This might helps you in
DOCUMENT POSTING ERROR
See this,
You can use RFBIBLO program for General Ledger Postings...This will create BDC sessions if the transaction fails
Thanks,
AKL

Error code "File not found Result code = -43" PLEASE HELP!

I keep getting this error message: "File not found Result code = -43" when trying to load instruments from the media tab. Does anyone know why this is happening and know how to fix this problem? I'm in the middle of a project and need help! Thanks.

So, I've narrowed down the problem to happening with the following steps (could someone possibly try this and see if the same problem is happening?)
If I load an instrument track and its blank and select a GARAGEBAND loop from the media list, I get the error message.
If I load a new instrument track and select any other instrument from the media list (besides a Garageband instrument) everything loads fine, AND THEN if I select a Garageband instrument from the list, it loads fine with no error.
If I select "No plug-in" in the channel strip after this, and try to load a Garageband loop, I get the error message and all other instruments from the media lists fail to load until I select "no-plugin" again from the channel strip and select an instrument from the media list BESIDES a Garageband instrument and then go from there (and can then load a Garageband instrument).
Is anything like this happening to anyone else? Does anyone have any ideas why this would be happening?

Internal error: doc.balance not zero F110

Hi All,
I need help from your side,
While doing F110 and when I see the proposal log I found there was message saying
Internal error: doc.balance not zero / comp.code XXXX vendor XXXXXXXX
Balances: 0.00 EUR / 0.00 EUR
Balances: 800 / 0.00
So can some one guide me on this.
Thanks in Advance.
Regards,
Kiran

I believe you are paying something in EUR which is being cleared perfectly.
However, its value in other currencies (maybe your local currency?) is not 0 because the invoice and the payment were made in different moments and you don't have configured a Payment Difference Account.
Check that configuration in OB09 to validate that your account has an account for exchange rate differences.
Otherwise, try to pay it manually through F-53 to see what the problem is.
Hope this will help.
Regards,
Fede

Address not found but IE works

I have login to on secure website sucessfully but when I click on an option to display some statistic, I get the error message "Address not found".
I notice that there is an additional \\ added to the URL. Removing them is ok. Is there any setting to prevent firefox inserting the additional \?
Below is the URL I get when I click on the view statistic
http://\\203.116.218.20\mrtg2/61.8.240.47/61.8.240.47_172.24.29.201.html
I will need to remove the // after http: then it will display.
System configuration: Window XP Sp2, Bit defender internet security 2010, intel pentium 1.7GHz, 1 GB RAM, firefox v3.0.1
Have checked my bitdefender setting everything is allow for my firefox.
I do notice 1 thing, for IE, when I click on the statistic button, another window will open. I am not too sure if it makes a difference between opening tab and window.
Waiting for your reply

Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi. The program is built so a file dialog will pop up and ask for the destination of the file. Eventhough there is a file in the specified directory, an error is returned. Running open file+.vi by itself returns no error with the same file designation. Any clues?

noviceak,
Welcome to the NI Discussion Forums.
I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi). I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file? Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder. You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly. While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
I hope this helps and again, welcome to the community.
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support/
Message Edited by Simon H on 01-18-2007 08:01 PM
Message Edited by Simon H on 01-18-2007 08:03 PM
Attachments:
LV4 File Dialog.png ‏3 KB

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

Error in SRM 7.01,Trace showing Partner Ship-To Address not found in FEH.

Hi Gurus,
Please throw some light on my isssue.
We are developing Plan Driven Procurement Business Scenario in SRM.
Current System details are ECC 6.0 EHP4, PI 7.1 & SRM 7.01.
We have done all the configuration settings in ECC, PI & SRM.
PR created in ECC 6.0 and External source of Supply tab generated in PR, processed through SAP PI successfully to SRM 7.01. In SRM it showing an error trace as *Partner Ship-To address not found* . We are using ABAP Proxies and standard content for this PDP Scenario.Using PurchaseRequestERPSourcingRequest_Out as an outbound interface and PurchaseRequestERPSourcingRequest_In as Inbound interface. shopping cart is not getting created in SRM system. FEH is enabled in SRM system to trace the error.
Please provide inputs to resolve the issue.
Ashok

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

[Solve]Compile Ada code with integer_IO ,error integer.ads not found.

Hello all again.
I do some programming in Ada and i am very fascinated this language.
I got problem when using integer_IO in my code.
When it compiling I got strange error integer.ads not found.
BTW.My compiler is GNAT 4.4.1.
Thanks for help.
Last edited by SpeedVin (2010-03-01 17:30:56)

drcouzelis wrote:
I also think Ada is fascinating. I wrote a small video game in Ada and I use Ada a little at work.
"integer_IO" and "Integer_IO" doesn't matter, because Ada is case insensitive.
I'm not home right now, but I think "Integer_IO" is a subpackage of "Text_IO":
with Ada.Text_IO.Integer_IO;
If you want, you can post your code and I'll see if I can compile it.
Are you an Ada beginner? Even though I have been working with Ada for more than a year now, I still don't think I'm very good at it. I wish there was more documentation and more projects used Ada.
Yes I'm new into this language.
I really won to that there will be more project's/program's written in ADA.
This is my program code:
With Text_IO;
Use Text_IO;
With Ada.Text_IO.Integer_IO;
procedure file is
Age :integer range 0..100;
begin
if Age < 18 then
put_line("BABY!!!");
else
put_line("OLD MAN!!!");
end if;
end;
When I try to compile it I get error:
file.adb:3:17: "Integer_IO" is a nested package, not a compilation unit

Calling ni845xStatusToString gives: NI-845x: Unable to decipher status code 0xfffb6528 ( errorCode ). Error -1 - Directory not found.

Hi All,
I'm trying to get started programming my NI-USB 8451 with the NI USB 845x driver.
What I am trying to do is simply retrieve some of the error and warning messages from the driver. As instructed in the Hardware and Software manual for the NI USB 845x, I am making a call to
ni845xStatusToString
However, for any error code (valid or invalid), I get the following string back from the driver:
NI-845x: Unable to decipher status code 0xfffb6528 (<errorCode>). Error -1 - Directory not found.
where I see the supplied error code in <errorCode> above.
This makes me think that some type of dictionary or "Directory" that is external to the driver is not available on my system. Is this the case?
I have the 64-bit driver installed on my machine. This is further consolidated by the fact that all the other functions (ni845x*) work as intended and I am able to communicate with the device.
Can anyone help me understand why I cannot retrieve the error strings or warnings strings?
Your response is greatly appreciated.
Thank you!
Sincerely,
Ishrak Khair
Instrument Control Toolbox
MathWorks

That is odd that your application has trouble with it.
LabVIEW does not but, if you are seeing the error you reference update the driver its in the known issues resolved for 2.1.1
Are you trying to open the error file from an additional process? The driver is limited having no "Multi-Process Support"
Jeff

Preverify doesn't work. Always return error 2 "File not found"

Hello,
I have this configuration:
- Latest JDK and JRE
- Ubuntu Linux 7.10 64 bits
- NetBeans 6RC2 Mobility Pack
When I try to build a project, NetBeans returns:
Preverifying 6 file(s) into /home/alfredbaudisch/NetBeansProjects/GameBuilderDemo2/build/preverified directory.
java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
Then I downloaded WTK 2.5.2 by myself and tried to build it using the toolbar:
Creating project "GameBuilderDemo2"
Place Java source files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/src"
Place application resource files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/res"
Place application library files in "/home/alfredbaudisch/j2mewtk/2.5.2/apps/GameBuilderDemo2/lib"
Settings updated
Project settings saved
Building "GameBuilderDemo2"
java.io.IOException: Cannot run program "/home/alfredbaudisch/Desenvolvimento/Utils/WTK2.5.2/bin/preverify": java.io.IOException: error=2, File not found
Build failed Any suggestion?
Thanks.
Edited by: AlfredBaudisch on Nov 25, 2007 1:36 PM

The problem was that WTK was not accepting JRE 64-bits, then I installed JRE 32-bits and set up WTK to look for it.
I wrote an article about the platform Ubuntu + NetBeans 6:
http://mobiledeveloper.auriummobile.com/index.php/2007/11/25/perfect-java-development-platform-with-ubuntu-710-and-netbeans-6/
Edited by: AlfredBaudisch on Nov 25, 2007 6:47 PM

Need help - Error: MDN is not found (code: 33)

Whenever I open my Verizon Cloud it says "Error: MDN is not found (code: 33). I NEED HELP! This phone has to be sent back soon becuase I got a replacment. HELP HELP HELP
I have a galaxy s3
Subject line edited into post.
Message was edited by: Admin Moderator

Make sure both phones (iPhone, Moto X, Droid X, Samsung Galaxy, Nokia, Motorola) are connected to the same wifi .. on the new device you will first have to download and install the updates by going to Settings >> About Device >> Updates. Once the updates have been installed you will not receive the error "MDN is not found (code: 33). You can proceed to pair the devices and transfer your content. It will also give the option to select the type of content (contacts, photos, video) you want to transfer.
Thanks www.strongpurpose.com for helping find this solution .. they made it easy for me to get my content transferred so I can get back to the important stuff .. Follow Your Passion!

ERROR: Registry `REG_KEY_SYSTEM' not found

Hello, I installed Tuxedo 11.1.1.2.0 on Window 2008 and tried to run the simpapp program in the corba samples directory. I am getting an idl compiler error when they invoke the runme.cmd file. The error says:
idl simple.idl*
LIBORBCMD_CAT:27: ERROR: An internal software error occurred.*
-LIBORB_CAT:147: ERROR: Registry `REG_KEY_SYSTEM' not found.*
NMAKE : fatal error U1077: 'd:\oracle\tuxedo11gR1\bin\idl.EXE' : return code '0x1'*
Stop.*
Anyone have any idea what is going on here?
Fernando.
Thanks

Hi Fernando,
Try setting this environment variable and retry.
REG_KEY_SYSTEM=d:\oracle\tuxedo11gR1\udataobj\System.rdp
Thanks
Venkat

Internal error: Recipient address not found.return code : 80

Similar Messages

Maybe you are looking for