Internal error: SO_OBJECT_MIME_GET Exception: 3

Hi,
When I try to send email attached a text file, I am getting the error above.
What is the problem?
Thanks.
deniz.

Hi,
You just check setting in scot
Execute scot->setting->defoult domain
And put here default domain xyz.com
and check out..
Regards,
Harish

Similar Messages

  • Urgent:Error:SO_OBJECT_MIME_GET Exception : No Mail is sent to inbox

    Hi experts
    When testing Alerts through RSALERTTEST, the alert is received in the Alert Inbox but no mail is sent to inbox.
    I m getting this SO_OBJECT_MIME_GET Exception
    thnx
    Deb

    Hi Deb
    Which service pack are using . In case you are using SP14 and above , note 913858 has to be implemented
    After implementing note you have to do few settings
    Execute scot->setting->default domain and add here default domain xyz.com
    Regards
    Abhishek Mahajan
    ***Please reward points if helpful****

  • SO_OBJECT_MIME_GET Exception: 2

    Gurus ,
    i have gone through but still i could not solve the problem .
    The default domain is set
    code page is set
    but i am not sure why is this problem still persisting . help me solve this

    the problem is i am unable to send mails
    this is the error message i get , when i traced the log in SCOT
    Internal error: SO_OBJECT_MIME_GET Exception: 2
    Message no. XS829
    Diagnosis
    An error occurred in program SO_OBJECT_MIME_GET
    Error text: Exception:
    Additional information:
    2
    System Response
    Message processing terminated.

  • SO_OBJECT_MIME_GET Exception: 2 error

    I am getting an error "SO_OBJECT_MIME_GET Exception: 2" whenever some mail failed. A brief description of case:
    1. Sending 2 notification to same sender some times both processed successfully, sometimes one failed and one processed with same error.
    2. Sending notification to one mail id sometimes its successful and sometimes its failed with same error.
    Please let me know probable reason and solution for this error? Thanks in advance.

    Hi,
    please have a look on this thread:
    Re: SO_OBJECT_MIME_GET Exception: 2
    Daniel.

  • Internal error on xcode 2.5 when creating new project

    I just installed xcode 2.5 on a MacBook Pro running 10.4.11. I get the following error message when
    creating a new project (existing projects open fine):
    Uncaught Exception:
    * -[TSFileManager supportFilesRootPath]: selector not recognized [self = 0x360220]
    Stack Backtrace:
    The stack backtrace has been logged to the console.
    This is the backtrace from console:
    2007-12-31 14:54:49.951 Xcode[516] * -[TSFileManager supportFilesRootPath]: selector not recognized [self = 0x360220]
    2007-12-31 14:54:49.956 Xcode[516] Exception raised during posting of notification. Ignored. exception: * -[TSFileManager supportFilesRootPath]: selector not recognized [self = 0x360220]
    2007-12-31 14:55:01.145 Xcode[516] * -[TSFileManager supportFilesRootPath]: selector not recognized [self = 0x360220]
    2007-12-31 14:55:01.244 Xcode[516] ** INTERNAL ERROR: Uncaught Exception **
    Exception: * -[TSFileManager supportFilesRootPath]: selector not recognized [self = 0x360220]
    Stack:
    0 0x9e23deb1 -[TSException raise]
    1 0x92852243 +[NSException raise:format:]
    2 0x928da4c6 -[NSObject doesNotRecognizeSelector:]
    3 0x927fe327 -[NSObject(NSForwardInvocation) forward::]
    4 0x90a5ccbd _objcmsgForward
    5 0x94d6cced +[NSBundle(TSBundleAdditions) searchPathsForSupportFilesWithSubpath:]
    6 0x9eaf3ed4 -[PBXWizardChooserWizard addWizardProxiesFromDefaultSearchPaths]
    7 0x00009c8e
    8 0x93383db8 -[NSApplication sendAction:to:from:]
    9 0x93431d0b -[NSMenu performActionForItemAtIndex:]
    10 0x93431a4d -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:]
    11 0x93362e32 __NSHandleCarbonMenuEvent
    12 0x93296818 __DPSNextEvent
    13 0x93296072 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:]
    14 0x9328fdf7 -[NSApplication run]
    15 0x93283d4b _NSApplicationMain
    16 0x0000a46e
    17 0x0000a395
    Any suggestions about why this is happening and how to correst it?
    Rick

    I had the same issue then I found out all you have to do is to set the default view to List before opening any previous or new project and it worked, credit goes to this user below who found the solution.
    ahmedMac25
    I was able to resolve by workaround:
    1. Closed all open applications
    2. relaunch Finder
    3. run  sudo find / -name ".DS_Store"  -exec rm {} \;
    4. this removes all  .DS_Store old files on the computer
    5. launch finder and set default view to "LIST VIEW" as shown here:http://macs.about.com/od/usingyourmac/ss/Setting-Finder-Views-For-Folders-And-Su b-Folders_2.htm
    5. rerun the offending application and file chooser works

  • Internal Error - BPF, BPC NW 7.5

    Hi.
    When I open the Step in BPF (My Activities) there is an internal error: "As exception occured that was not caught".
    I don't understand what the problem is.

    Hi Alexandra ,
    Please follow the Sap note what Ivan Mentioned 1679556.
    Regards,
    Srinivasan.

  • Internal error (100000003)

    Hi All!
    I'm getting "Internal error (100000003)" exception sometimes when trying to execute SAPbouiCOM.Application.Company.GetDICompany() method.
    any ideas ?
    i guess it is some issues with License Server, but couldn't find any SAP Notes.
    Thanks in advance

    Hi.......
    Its a problem with your SDK code. Please check your connection string with DB and server in your Code.......
    Regards,
    Rahul

  • Error in APO GATP: Exception while scheduling activit & Internal error 0010

    Hello APO experts,
    I am working for a APO project where GATP is used. At the time of sales order creation user is getting ,
    The following errors / warnings are being returned by APO
    W VV                   800 APO: Exception when scheduling an activity
    E VV                   800 APO: Internal error: Item /000010
    Has anybody come across such issues. Waiting for your replies.
    Regards
    Ravindra

    Hi,
    This is a very generic error message but points to the scheduling. Goto your SCM system and check the settings for your scheduling. Do you use CPS - configurable process scheduling ? Then I assume an error in the scheduling schema.
    Please check your settings and maybe userexits and provide us some further details.
    regards,
    MIchael

  • Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast: Exception Name: NSInvalidArgumentException Description: -[_NSConcreteUserNoti

    Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast:
    Exception Name: NSInvalidArgumentException
    Description: -[_NSConcreteUserNotification activationType]: unrecognized selector sent to instance 0x25a06b0
    User Info: (null)
    0   CoreFoundation                      0x922216fb __raiseError + 219
    1   libobjc.A.dylib                     0x920108db objc_exception_throw + 230
    2   CoreFoundation                      0x9222563d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
    3   CoreFoundation                      0x9216af77 ___forwarding___ + 487
    4   CoreFoundation                      0x9216ad22 _CF_forwarding_prep_0 + 50
    5   iTunes                              0x00df38e2 iTunes + 14624994
    6   iTunes                              0x00df36ae iTunes + 14624430
    7   libobjc.A.dylib                     0x9201c6c5 -[NSObject performSelector:withObject:withObject:] + 77
    8   Foundation                          0x93c12d85 -[_NSConcreteUserNotificationCenter _sendDelegateMessage:sendToAppDelegate:withNotificationFromMessage:] + 335
    9   Foundation                          0x93c12eaf -[_NSConcreteUserNotificationCenter _notificationPresentedMessage:] + 58
    10  Foundation                          0x93c137c2 __block_global_1 + 156
    11  libdispatch.dylib                   0x9371b2cf _dispatch_call_block_and_release + 15
    12  libdispatch.dylib                   0x9371ea80 _dispatch_client_callout + 46
    13  libdispatch.dylib                   0x9371c8e8 _dispatch_main_queue_callback_4CF + 223
    14  CoreFoundation                      0x9211b255 __CFRunLoopRun + 1829
    15  CoreFoundation                      0x9211a7c4 CFRunLoopRunSpecific + 308
    16  CoreFoundation                      0x9211a67b CFRunLoopRunInMode + 123
    17  HIToolbox                           0x90b6fc76 RunCurrentEventLoopInMode + 242
    18  HIToolbox                           0x90b76eb9 ReceiveNextEventCommon + 374
    19  HIToolbox                           0x90b76d34 BlockUntilNextEventMatchingListInMode + 88
    20  AppKit                              0x97621923 _DPSNextEvent + 709
    21  AppKit                              0x97621167 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    22  AppKit                              0x9761d78c -[NSApplication run] + 855
    23  iTunes                              0x0017a898 iTunes + 1546392
    24  iTunes                              0x0017a709 iTunes + 1545993
    25  ???                                 0x00000002 0x0 + 2

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

    Hello Gurus,
    I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
    As part of my project requirement, I have join those two views and get all the fields that exist in them.
    When I am doing so, I am getting a weird error as shown below.
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
    TRexUtils/ParallelDispatcher.cpp:275
    message not found; $message$='TSR HTKD JFSDFM'
    Please check lines: 59,
    Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
    I did try to increase the length of the field and change the data types but nothing has worked.
    Could you please help me in getting this one resolved.
    Thanks,
    Raviteja

    Hi,
    I am exactly facing the same issue:
    Error: [129]: transaction rolled back by an internal error:  [129] transaction rolled back by an internal error: exception 141000274:
    But i found a fix :-) .....
    This may be a very late reply but it would help people who desperately searching for an answer for this issue.
    I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
    So i used CAST function to truncate the excess junk values (may be spaces).
    Example:
    I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
    In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
    So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
    But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
    Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
    Enjoy....
    Thanks & Regards
    Prakash K

  • "Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

    “Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
    The error behaviour is quite irregular and does not occur for specific condition.
    Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
    (http://support.microsoft.com/kb/2152148)
    The current version of SQL Server I am using is as below:
    Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)   Jun 17 2011 00:54:03   Copyright (c) Microsoft Corporation  Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    Thanks in advance for the help!

    Hi Mon,
    The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
    Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
    using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    Regards,
    Charlie Liao
    TechNet Community Support

  • 500 Internal Server Error  Servlet error: An exception occurred.

    Hi All,
    I was trying to access oracle applications. I installated R12 on Linux through VM Ware. I started Database Listener , Database and Finally Application Tier using adstrtal.sh. Every thing went fine with exit status as zero. I installed mozillla firefox and jre 1.6.0_07 but when I gave URL and tried to access applications i was getting 500 Internal server error.
    Below is the error
    500 Internal Server Error
    Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.

    I've a situation that, we have to add some pages into the APPS environment. For that, what we generally do is,
    1. Stop the Apache server.
    2. Add the pages.
    3. Start the Apache server again
    And it should start.
    But, In our case it's giving an internal server error.
    And as we run autoconfig its working fine.But as it is a test server, we've got to add the pages several times. Each and every time we add pages we have to run autoconfig.
    our environment is
    OS: IBM AIX 6
    APPS: release 11.5.10.2
    we can't understand what the problem is!!!
    Is the there any solution for that?
    Please do suggest, if any one experienced the same...
    Edited by: badri on Nov 9, 2011 6:17 PM

  • [URGENT] 500 Internal Server Error  Servlet error: An exception occurred

    I have Oracle ebs 12 running on unix , and i do clone from production to Development ,
    after execute adstrtal.sh , i do check with adapcctl.sh status
    and the result is :
    Checking status of OPMN managed Oracle HTTP Server (OHS) instance ...
    /oracle/UATGG/inst/apps/UATGG_smjkt-tsfn01/ora/10.1.3/opmn/bin/opmnctl[31]: unlimited: 0403-009 The specified number is not valid for this command.
    Processes in Instance: UATGG_smjkt-tsfn01.smjkt-tsfn01.corp.sm.co.id
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    OC4JGroup:default_group | OC4J:oafm | 285084~ | Alive
    OC4JGroup:default_group | OC4J:forms | 224143~ | Alive
    OC4JGroup:default_group | OC4J:oacore | 124518~ | Alive
    HTTP_Server | HTTP_Server | 167123~ | Alive
    but when im open the url , i have face with error : "500 Internal Server Error
    Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details "
    I check the apche log and have error= "
    [Tue Apr 24 15:42:22 2012] [error] [client 172.16.101.37] [ecid: 1335300142:172.16.4.167:20841248:0:1,0] mod_oc4j: Failed to find a failover oc4j process for session request for
    destination: application://oacore (no island or jgroup).
    [Tue Apr 24 15:42:48 2012] [error] [client 172.16.101.37] [ecid: 1335300168:172.16.4.167:20841248:0:2,0] File does not exist: /oracle/UATGG/inst/apps/UATGG_smjkt-tsfn01/portal/f
    avicon.ico
    and then im do shutdown application and running autoconfig in DB tier dan APPS tier , and the result is succesfully,
    i meet with noted "R12: Resolving error mod_oc4j Failed To find A Failover OC4J Process For Session Request For Destination [ID 785296.1] " and do all step with autoconfig again , and autoconfig run sucessfully , and then im start apps and check adapcctl.sh status , running well
    but when im open URL login , i have same problem with before is "500 Internal Server Error
    Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details "
    can u help me :(

    Did AutoConfig complete successfully?
    Please see these docs.
    What is the Significance of Error Message Opmnctl[20]: Unlimited: 0403-009? [ID 555406.1]
    Unlimited: The Specified Number Is Not Valid For This Command [ID 224223.1]
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
    Thanks,
    Hussein

  • AC-50480: Internal error occurred: java.lang.Exception: Error while generat

    Hi there
    I am moving db tier on another server with the clone utility. post clone on db tier were successful but on apps tier i am getting following error in adconfig.log file
    AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
    Error generating tnsnames.ora from the database, temporary tnsnames.ora will be generated using templates
    Instantiating Tools tnsnames.ora
    Tools tnsnames.ora instantiated
    Web tnsnames.ora instantiated
    adgentns.pl exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    .end std out.
    .end err out.
    Result : FAILED
    i have used following options for solution but no success
    1. Open a new shell and source the APPS Environment.
    2. Start the sqlplus Utility and execute following commands :
    sqlplus apps/<Password>
    exec fnd_conc_clone.setup_clean
    3. Open a new shell and source the DB-Tier Environment.
    4. Execute Autoconfig at the DB-Tier.
    5. Switch to the Shell with the APPS Enviornment sourced or start a new Shell and source the APPS Environment.
    6. Execute Autoconfig at the APPS-Tier.
    autoconfig run successufully on db tier but failed on apps tier.
    Please help me out what to do.
    Regards,
    Mohsin

    Hi;
    What is EBS version?
    Please see:
    AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora. [ID 1324667.1]
    During Autoconfig "adgentns.pl" fails: "AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora" [ID 453901.1]
    "AC-50480" Error Generating the "listener.ora" File. [ID 1089036.1]
    Regard
    Helios

  • An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

    An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024) 
     while proview the report i will get this error am using sql server 2008R2,
    can u plesae hlep me out for this
     

    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
      <Locale>English (United States)</Locale>
      <TimeZone>W. Europe Standard Time</TimeZone>
      <Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
      <SystemName>WEGDACM1</SystemName>
      <OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
      <OSVersion>6.1.7601</OSVersion>
      <ProcessID>4880</ProcessID>
      <Virtualization>Hypervisor</Virtualization>
    </Header>
    rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
    rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
    rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
       at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
    filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
       at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
    rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
    rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
    rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
    library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
    servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
    appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
    library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

Maybe you are looking for