Internal error: Unable to find the access rule.

I have a Cisco ASA 5550 and using ASDM 6.2.
Opening the ASDM, in Firewall Dashboard, in Top 10 Access Rules, show the second rule with more hit: "interface X | source: any | Dest: any | Service: ip | Action: Permit.
During the day, the hits increase and decrease.
Well, the problem: That rule there isn't.
When I click with the right mouse button and click on show rule, a message is displayed:
"Internal error: Unable to find the access rule."
I can't find the rule in Configuration Mode and in Console Mode.
Well, the rule there isn't.
What can I do for this rule disappears from the Top 10 Dashboard?

I suggest opening a case with Cisco TAC. This could be an issue with the device itself.
Please remember to select a correct answer and rate helpful posts

Similar Messages

OWB 11gR2 - Internal ERROR: Can not find the ACL containter

OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.

We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
     at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
     at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
     at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
     at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
     at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
     at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
     at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
     at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
     at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
     at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
     at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
     at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors?

RICS0001:Internal Error,unable to process the collected data from the device.

Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
Alex

Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

REP-0495: Internal Error - Unable to tokenize the query.

Hi
I am getting error when I run xml reports .
log file is as follow
Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FLUNARD module: UFlex-Debtors Trial Balance
Current system time is 27-JAN-2010 13:10:22
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_START_DATE='1999/01/01 00:00:00'
P_END_DATE='31-JAN-09'
P_CHART_OF_ACCOUNTS_ID='50268'
P_ORG_ID='103'
XML_REPORTS_XENVIRONMENT is :
/applprod/oracle/prdora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /applprod/oracle/prdora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-0495: Internal Error - Unable to tokenize the query.
Report Builder: Release 6.0.8.25.0 - Production on Wed Jan 27 13:10:30 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1929569.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 27-JAN-2010 13:10:49
Thanks
Rahul

I suggest opening a case with Cisco TAC. This could be an issue with the device itself.
Please remember to select a correct answer and rate helpful posts

LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.

Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
Laxmi

They are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

Did you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel

Getting error "Unable to find the published output for this request"

1. Created a Data Template
2. Created a Data Definition using the above Data Template
3. Created a RTF template and registered the same in XML Publisher Administrator
4. Created Concurrent program for the data template using 'XDODTEXE' as executable
5. Ran the above concurrent program and it completed successfully.
6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
7. I can see the XML output in the $APPLCSF/out directory.
8. Also the short name for concurrent program and data definition code and template code are same.
I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
Am I missing something here. Can anyone come across this issue.
I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
Thanks

I tried again after applying XDO 5.6.2. I am still not able to see the output.
Here is the logfile info. There is no mention of OPP or PUBLISH section:
XDO Data Engine ver 1.0
Resp: 21540
Org ID : 101
Request ID: 348042
All Parameters: p_batch_id=7169
Data Template Code: AUDRPT
Data Template Application Short Name: XXCUST
Debug Flag: Y
{p_batch_id=7169}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 348042
Number of copies : 0
Printer : noprint
Finished executing request completion options.

Error - Unable to find the cube in catalog in Webi Report

Hi All,
We have a WEBI report built on SAP BW OLAP universe. The report is accessible from a user who has SAP_ALL authorization. However, a User role created to access and refresh the same report is giving the error message as below.
'' Unable to find cube <Multiprovider> in catalog $INFOCUBE (WIS10901)''
I have added the authorization object for BW workbench object Multiprovider and provided authorization. The same was tested in BW environment as well. However, the report could not be refreshed in BO WEBI.
SAP BW 7.01 and BO XI3.1.
Anybody who can help me on this? It could be that some authorizations are missing . But not sure how to trace what are missing.
Thanks and Regards
Srinivas

Try searching for the InfoProvider/query in the transaction MDXTEST with the test user, you could get more detailed error messages there.
Here you will find how to activate traces on the BO side:
FEATURED EVENTS
But frankly speaking, I think BW traces will be more accurate in your case.

Error: Unable to find the WSDL port defined for Service

Hi,
I am facing below error while invoking partner's WSDL:
Oracle.Fabric.Common.FabricInvocationException: Unable to find WSDL port defined for the service.
Can anybody guide me what could be the exact issue?
* I am able to ping that host.
Thanks
Richa

Hi Puneet,
I am able to access WSDL from the browser and value of Location in composite.xml is correct.
Regards.

Error: unable to find the directory

Hi experts!!
                  While configuring the scenario ( File to MSACCESS) , I am getting an error msg
<b>Processing Error: Directory /lenovo-1a1a67e1/sender does not exist!</b>
sender folder is in my Laptop and I configured the scenario in main server.
so it has to pick the files frm the laptop...( Source ).
can anyone help me how to give the parameters for ( when the file is in Network)
Thanks in advance
suneee

Hi,
          I configured FTP protocol and gave the parameters as follows:
FTP Connection Parameters:
server : 192.168.1.198
port    : 21
anonymous logi - checked
connect mode : permanently
transfer mode : Binary
Folder : c:/sender
filename : access.xml
and now I am getting the error as follows....but the files in the source folder has not picked. the error is as follows:
S<b>ender Adapter v1014 for Party '', Service 'BS_ACCESS1_S':
Configured at 11:44:09 2007-01-11
Up and running - no message processing until now</b>
Thanks in advance.
Sunee

Unable to find the workbook on server while accessing woekbook

I am opening in query in Bex analyzer
After getting the result , I am saving the file as workbook in favourites folder
It is not giving any error. When I try to open the workbook It shows me the name in the favourites folder, but gives error "Unable to find the workbook on server"
If I close the Bex analyzer and open again, its now showing the file in favourites folder meaning file was not saved on the server. I tried with sap_all authorization
Please help

Hi,
I got the same problem as yours. But if "sap-all" given, it works. I do not want to give this authorization to all users, so would you pls tell me your final solution?
Thanks a lot.
BR.
Angela

Nternal ERROR: Can not find the ACL containter for object ...

We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
     at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
     at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin

Unable to find the published output for this request - problem

Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regards

Hi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein

DataServices Error "Unable fo find free in-memory datarecord"

Hi,
While running a process to suppress few million data warehouse records (1.8M), the process errors out with following error:
DQX-058302: |Data flow Test_SuppressPS_2|Transform BASE_MATCH Transform <BASE_MATCH>: DLL <libmatchtransformu.so> runtime function <ProcessCollection> failed with error <:|Data flow Test_SuppressPS_2|Transform BASE_MATCH:Transform <BASE_MATCH>: Internal error: Unable to find free in-memory datarecord while processing pageable collection as all <1000> records are locked.>. More detailed information may be obtained from previous errors.
Previous message:
SYS-058310: |Data flow Test_SuppressPS_2|Transform BASE_MATCH Transform <BASE_MATCH>: Internal error: Unable to find free in-memory datarecord while processing pageable collection as all <1000> records are locked.
If I try to limit the data warehouse records to a smaller number (about 0.5M), it seems to work fine.
Or if I change the Cache type to "In-Memory" in the data transform, it works fine for all the 1.8M records.
My problem is that I am not able to understand the above error the way I can change things to correct it. Running In-Memory all the time is not good for us as there may be more then one process running at same time in production.
Thanks,
Gaurav

Hello Gaurav,
This internal error seem like will require detail investigation. I would recommend filing a customer support request and we will take it from there.
Thanks,
Abhiram

Internal error: Unable to find the access rule.

Similar Messages

Maybe you are looking for