Internal Error:... vobulator...block planner... line 217 Encore

I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's at less than 1MB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all. I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEX

Well that's good news Stan Jones.
my photos are average 1000X1600 pixels and sizes are 500K-700K.
This is the first time that I've done a DVD with this many slides in it. In the past I did a slide show with about 50 pictures (4-5MB each) and Encore crashed in a different way. Called adobe and they didn't even know what was wrong. After resizing to a similar size that I'm using now, it worked fine.
I say that all just to say this. I went through and made sure they were all at a reasonable and workable size. So I figured it would be ok. If size is really the issue, then ok. Is there an easy way to resize 480+ jpg's without spending 2 days opening them all up on photoshop and resizing them one by one? I read (or tried to read) that obnoxiously long forum that "John T Smith" linked but all I gathered is that a person should scale photos down.
But I've gotta say, this sounds like a petty problem if photo size is really the case. They're at a very reasonable size and the DVD is only going to be 1 hour long. Can Encore really not handle 1 hour of slide shows?
I'm going to die if I have to resize all these pictures! Arg!

Similar Messages

Slide Show ERROR, Internal software\Vobulator\BlockPlanner\.cpp Line 217

I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's about 1000X1600 pixels and 500KB-700KB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all.
The Symptoms/problem that I'm getting is this, when I try to Preview my DVD and ALSO when I try to build my DVD, the build will go through and "build the slide shows" then after it does that, this will come up
I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEX

You really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701

Internal software error:. \ Vobulator \ block Planner \ BlockPlanner.cpp, line 217

bnjr a tous,
j'ai un big probleme.
l'eureur "internal software error:. \ Vobulator \ block Planner \ BlockPlanner.cpp, line 217"
s'affiche a la derniere etape, c-à-d quant il faut copier sur dvd.
tout aide sera la bien venu.
merci
- NTSC
- plusieurs menus avec animation
- QUELQUE VIDEOS, montage fait avec premier pro
- windows 7

J'ai le même problème, pourtant lorsque je fait une simulation le prog n'affiche aucun problème. J'ai importé ma séquence depuis première pro, j'ai rendu le diaporama. Quand je lance la génération il bug sur la line 217 nommé plus haut. J'ai fait un export du film en h.264 puis tenté de l'utiliser sur la time line mais ça bug aussi l'image reste figée. J'ai lu les conseils mais je comprends pas bien "enlever les marqueurs de chapitres à la fin des timelines". J'ai un menu, un diaporama et un sous menu avec 20 chapitre et j'utilise 4,44Go de l'espace DVD. J'attends de vos nouvelles car là je sais plus quoi faire du tout à part acheter un mac et monter sous final cut

Fatal Internal Error: "Memory Manager.cpp", line 547

Hello,
I am using LV 2009 and I am also getting an error as follows:
=======================================================
Fatal Internal Error: "Memory Manager.cpp", line 547
LabVIEW version 9.0.1
You will lose any unsaved work. For assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
=======================================================
I get this error when I start executing steps on TS 4.2.1 as well as when I do "Unload All Modules" in TS. Please find the attched logs. Further, I could not run anything in TS and need to restart the PC to re-run the sequence after everytime this error occurs.
We have transited through LV 8.0, 8.2, 8.5 and now 2009 over past 4 years for our project and this is the first time I could see this error.
Please help.
Thanks.
Attachments:
lvlog2010-06-09-10-06-07.txt ‏2 KB
lvlog2010-06-09-18-52-36.txt ‏1 KB
lvlog2010-06-09-19-16-20.txt ‏2 KB

Adding on to Pritam's post:
For the earlier "Fatal Internal Error: "Memory Manager.cpp", line 547" , we found that a couple of our dll's which were developed in LV 8.5.1 had not been recompiled in LV2009. After recompiling each of them in LV2009, and then running the same sequences in TestStand,this error vanished.
But now again we're seeing this error, and that too only on 3 PCs systems out of 5 PCs!
The same installer has been installed on all 5 sytems (after removing the earlier installers and running MSI Blast.exe them).
The error now appears again, only when we try to exit TestExec.exe and another tool built in LabVIEW.
So everything works fine and tasks are performed,etc, but when we close the window or try the exit that program, the "Fatal Internal Error: "Memory Manager.cpp", line 547" pops up.
If we say "OK" to it, the window closes, but the Task is seen still running in the Task Manager and has to be manually terminated (End Task).
Does anyone know what could be going wrong?

Fatal Internal Error : "objheap.cpp", line 579 - Labview 7.1 running on vista

Hello,
I was developing a project in Labview 7.1 and had saved it on vista when the vista OS decided to enter suspend, Labview 7.1 stopped responding as a result and I had to reboot. I will never trust vista again but when I try to open the VI I get the following error:
Fatal Internal Error : “objheap.cpp”, line 579.
And the following text file report is created. What I am wondering is there any way to restoring or uncorrupting this VI which is attached. Sub VI’s are not included but if you can get the VI to open even without them then the problem is sorted.
#Date: 25 Feb 2009 12:13:28
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 7.1
#AppKind: FDS
D:\lvmerc\src\source\objheap\objheap.cpp(579) : DAbort: Heap has insane block size
$Id: //labview/branches/Mercury/dev/source/objheap/objheap.cpp#3 $
0x009DFC85 - LabVIEW <unknown> + 0
0x007080AC - LabVIEW <unknown> + 0
0x007079E1 - LabVIEW <unknown> + 0
0x00A66716 - LabVIEW <unknown> + 0
0x00706B02 - LabVIEW <unknown> + 0
0x006073AE - LabVIEW <unknown> + 0
0x0070532B - LabVIEW <unknown> + 0
0x00A653E5 - LabVIEW <unknown> + 0
0x00A66911 - LabVIEW <unknown> + 0
0x009ED231 - LabVIEW <unknown> + 0
0x005ADED7 - LabVIEW <unknown> + 0
0x004B7F79 - LabVIEW <unknown> + 0
0x004B7EA7 - LabVIEW <unknown> + 0
0x004B7CF9 - LabVIEW <unknown> + 0
0x004B8492 - LabVIEW <unknown> + 0
It also managed to corruptly my library file for the project which I cannot open also and is attached,
Thank you
Message Edited by Support on 03-02-2009 08:50 AM
Attachments:
looptest.vi ‏1743 KB
AbbottHMITree.llb ‏4063 KB

Hello Paul,
I have been looking into your error code as well as the attached files of your VI and LLB. Pasting in your error code is proving very helpful in trying to help you. I initially tried to open your files in my system, where I would possibly be able to resave them for you, however it looks like I will have to try a different approach.
As I understand it, you have been using LabVIEW 7.1 Full Development System with Windows Vista. LabVIEW 7.1 was released during the years when only Windows 2000 and XP were available. With the release of Windows Vista in later years, National Instruments produced LabVIEW 8.2.1 with support for Windows Vista Business or greater.
Please reply with the following information:
Are you using Vista 32-bit or 64-bit?
Are you still able to open the LabVIEW Development Environment to produce new VIs?
Have you tried to open other VIs (after backing them up) with LabVIEW 7.1?
Regards,
George T.
Applications Engineering Specialist
National Instruments UK and Ireland

Internal error at ctxsys.drue line 157 while optimising

On a table containing 410000 documents (table has 2 columns, an integer ID and a CLOB containing the document) I created an index with a path section group (using
begin
     ctx_ddl.create_section_group('xml_path_section', 'PATH_SECTION_GROUP');
end;
create index data3_context on data3 (data)
indextype is ctxsys.context
parameters ('     datastore ctxsys.default_datastore
          filter ctxsys.null_filter
          lexer ctxsys.default_lexer
          wordlist ctxsys.default_wordlist
          storage ctxsys.default_storage
          stoplist ctxsys.default_stoplist
          section group xml_path_section
          memory 40M
          populate')
/Optimization of several tokens result in the following message:
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-00600: internal error code, arguments: [711], [1], [0xD780060], [kdifxs - prefix context], [], [], [], []
ORA-06512: at "CTXSYS.DRUE", line 157
ORA-06512: at "CTXSYS.CTX_DDL", line 1408
ORA-06512: at line 11 Any hints?

That's an ORA-600 coming from the database (underneath text code) so I suggest you contact worldwide
support -- they can gather trace files, etc. to help you.

Fatal Internal Error : "OMUDClassMgr.cpp". Line 1128

I received the following message:
Fatal Internal Error : "OMUDClassMgr.cpp", 1128
LabVIEW version 8.2.1
I was trying to build an application using the application builder.
Has anyone else had this issue? What needs to be done to fix this.

Hello,
This was reported to R&D (#4ALB7O89) for further investigation. Are you able to reproduce this problem with the same VI? Are you able to build an application with a simple VI?
Regards,
Elizabeth S.
Applications Engineer
National Instruments

Fatal internal error: memorymanager.cpp, line 566

Hello all
I have been seeing this error sicne recently, when I run a test sequence in TestStand 2010 SP1, f1. I call dll made in NI LabVIEW 2010 SP1, f4.
I had been using this test sequence and dll functions since almost two months. but its just since last couple of days that I receive this error.
I also get a TestStand execption and then the TestStand would crash. the reason why I am posting it here is because, when I do not run the step which has this dll call, I do not get the error. My entire tests runs over days. As soon as I include this dll call in the test, I keep getting this error.
Along with this MemoryManager error, I also see "TestStand Exception" and "TestStand has to close due to an error".
The dll function has been developed using LV 2010 SP1. That is a monitor VI whose front panel will be opened using dll call. I pass a test file name using the dll calls and then the VI will open the TDMS file and display the data till I click Stop.
this TDMS file is being written into, inside a datalogging dll which is also launched from TestStand. This dll is also developed in LabVIEW by us.
I have been using this setup since weeks and now I get this error. Also, I get this after I had upgraded both TS and LV to the latest fixes (f1 and f4).
But the help for this error on NI website actually says we should upgrade to the latest fix inorder to avoid this error!!
I will post this also on the TS board.

Same error. TestStand 4.2.1 calling LabVIEW 10.0.1 (2010 SP1).
Joe Gerhardstein
Averna Test Systems
Certified LabVIEW Architect
http://www.averna.com
Attachments:
error.JPG ‏18 KB

Fatal Internal Error

Fatal Internal Error in drawmgr2.cpp line 333 Labview version 7.1.1
This
is a repeatable crash when trying to open "Config Numeric
Comparison.vi" from the Mindstorm 1.1 "Blocks" directory. No option is
given to send a report.
-David

duplicate post: http://forums.ni.com/ni/board/message?board.id=beta18&thread.id=563&jump=true
LabVIEW Champion . Do more with less code and in less time .

Error Message "PLS:707, unsupported construct or internal error "

I am having a Stored Procedure which runs most of the times successfully when executed.But all of a sudden it throws a error message
ERROR at line 1:
ORA-06553: PLS-707: unsupported construct or internal error [2601]
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
So to correct this problem, i just compile the procedure again without doing any change.After doing this it works fine.When i logout from Oracle and relogin and try to execute the same SP , it again throws the error message.I am in need of a solution for this problem at the earliest.So request you to provide the feedback at the earliest.
I am using
Oracle8 Release 8.0.5.0.0
PL/SQL Release 8.0.5.0.0
I have attached the source code below.
CREATE OR REPLACE PROCEDURE Gen_SinPrjEff(Sp_Proj_Id IN NUMBER,
Sp_Emp_Id IN VARCHAR2,
Sp_Start_Date IN VARCHAR2,
SP_End_Date IN VARCHAR2)
IS
Date_Null NUMBER(1) := 0;
CURSOR prjeff IS
SELECT aa,
bb,
dd,
sum(ee)
FROM ( SELECT 'ProjectEffort' aa,
RPAD(SUBSTR(b.employeename,1,20),20,' ') bb,
'' dd,
SUM(a.hourstoday) ee
FROM timesheetentry a,
employeemst b,
project c,
project d
WHERE a.entryfromprojectid = Sp_Proj_Id
AND a.projectid = Sp_Proj_Id
AND c.projectid = a.entryfromprojectid
AND d.projectid = a.projectid
AND b.employeeno = a.employeeno
AND ((Date_Null = 9) OR ((Date_Null = 1) AND
(a.entrydate BETWEEN TO_DATE(Sp_Start_Date,'DD-Mon-YYYY') AND
TO_DATE(Sp_End_Date,'DD-Mon-YYYY'))))
GROUP BY RPAD(SUBSTR(b.employeename,1,20),20,' '),
SUBSTR(d.projname,1,30)
UNION
SELECT 'ProjectEffort' aa,
RPAD(SUBSTR(b.employeename,1,20),20,' ') bb,
'' dd,
SUM(a.hourstoday) "ee"
FROM timesheetentry a,
employeemst b,
project c,
project d
WHERE a.entryfromprojectid <> Sp_Proj_Id
AND a.projectid = Sp_Proj_Id
AND c.projectid = a.entryfromprojectid
AND d.projectid = a.projectid
AND b.employeeno = a.employeeno
AND ((Date_Null = 9) OR ((Date_Null = 1) AND
(a.entrydate BETWEEN TO_DATE(Sp_Start_Date,'DD-Mon-YYYY') AND
TO_DATE(Sp_End_Date,'DD-Mon-YYYY'))))
GROUP BY RPAD(SUBSTR(b.employeename,1,20),20,' '),
SUBSTR(d.projname,1,30)
GROUP BY aa,bb,dd
UNION
SELECT 'ProjectOthers',
RPAD(SUBSTR(b.employeename,1,20),20,' ') "Employee Name",
RPAD(SUBSTR(d.projname,1,30),30,' ') dd,
SUM(a.hourstoday) "Effort Spent"
FROM timesheetentry a,
employeemst b,
project c,
project d
WHERE a.entryfromprojectid = Sp_Proj_Id
AND a.projectid <> Sp_Proj_Id
AND c.projectid = a.entryfromprojectid
AND d.projectid = a.projectid
AND d.swonflag = 0
AND b.employeeno = a.employeeno
AND ((Date_Null = 9) OR ((Date_Null = 1) AND
(a.entrydate BETWEEN TO_DATE(Sp_Start_Date,'DD-Mon-YYYY') AND
TO_DATE(Sp_End_Date,'DD-Mon-YYYY'))))
GROUP BY RPAD(SUBSTR(b.employeename,1,20),20,' '),
SUBSTR(d.projname,1,30)
UNION
SELECT 'SwonEffort',
RPAD(SUBSTR(b.employeename,1,20),20,' ') "Employee Name",
RPAD(SUBSTR(d.projname,1,30),30,' ') "Project To",
SUM(a.hourstoday) "Effort Spent"
FROM timesheetentry a,
employeemst b,
project c,
project d
WHERE a.entryfromprojectid = Sp_Proj_Id
AND a.projectid <> Sp_Proj_Id
AND c.projectid = a.entryfromprojectid
AND d.projectid = a.projectid
AND d.swonflag = 1
AND b.employeeno = a.employeeno
AND ((Date_Null = 9) OR ((Date_Null = 1) AND
(a.entrydate BETWEEN TO_DATE(Sp_Start_Date,'DD-Mon-YYYY') AND
TO_DATE(Sp_End_Date,'DD-Mon-YYYY'))))
GROUP BY RPAD(SUBSTR(b.employeename,1,20),20,' '),
SUBSTR(d.projname,1,30);
Eff_Type admin32.prjeffdata.prjefftype%type;
Proj_Name admin32.prjeffdata.projname%type;
Emp_Name admin32.prjeffdata.empname%type;
Proj_Eff admin32.prjeffdata.projeff%type;
Tmp_Dind admin32.prjeffdata.del_ind%type;
BEGIN
-- dbms_output.put_line('Begin');
Tmp_Dind := NULL;
TmP_Dind := LPAD(LTRIM(RTRIM(Sp_Emp_Id)),6,'0') || LPAD(LTRIM(RTRIM(TO_CHAR(Sp_Proj_Id))),5,'0');
IF (Sp_Start_Date IS NULL) THEN
Date_Null := 9;
ELSE
Date_Null := 1;
END IF;
dbms_output.put_line(to_char(date_null));
DELETE prjeffdata
WHERE del_ind = LPAD(LTRIM(RTRIM(Sp_Emp_Id)),6,'0') || LPAD(LTRIM(RTRIM(TO_CHAR(Sp_Proj_Id))),5,'0');
COMMIT;
OPEN prjeff;
LOOP
Eff_Type := NULL;
Proj_Name := NULL;
Emp_Name := NULL;
Proj_Eff := NULL;
FETCH prjeff
INTO Eff_Type,
Emp_Name,
proj_Name,
proj_Eff;
EXIT WHEN prjeff%NOTFOUND;
INSERT INTO prjeffdata(prjefftype,
empname,
projname,
projeff,
del_ind)
VALUES (eff_type,
emp_name,
proj_name,
proj_eff,
Tmp_Dind);
--dbms_output.put_line(eff_type || ',' || emp_name || ',' || proj_name );
END LOOP;
CLOSE prjeff;
COMMIT;
--dbms_output.put_line('End');
EXCEPTION
WHEN NO_DATA_FOUND THEN
dbms_output.put_line('Error');
WHEN OTHERS THEN
dbms_output.put_line('Error');
END

This is what works on 8.1.7. I don't know the svrmgrl name in 8.0.5, but it should be in your %ORACLE_HOME%/bin
> cd %oracle_home%\rdbms\admin
>svrmgr sys/<password>@dbname
SVRMGR> @standard
Statement processed.
Statement processed.
Statement processed.
SVRMGR> @UTLRP
if this doesn't work then do this
SVRMGR> @catalog
good luck

Internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217

What is this about?

I also got the "Internal Software Error...Vobulator...Line 17" error in Encore CS6. One of my timelines had diagonal gray bars for the last 50 or so seconds and the culprit was the chapter marker I had placed within that (apparently) forbidden zone. Once I removed the errant marker (who needed that one anyway?) the error messgage disappeared.
For the record, I had eliminated everything in the but the First Play video (in other words the Main Menu, two timelines and a playlist did not appear in the Flow Chart) and I still got the error message. I tried renaming the timelines, using underscores instead of spaces, etc.
I also tried running Encore as an Administrator - didn't work.
Removing the chapter marker in the greyed out area at the end of a video clip was the only solution that worked.
Now if I could only figure out why the end of that clip - and only that one clip - was grayed out...

"internal software error:\Vobulator\TitlePlanner\CGOPGrouper.cpp line 410

I have a sequence, one of 3, in Eudora. This sequence has 5 menus, with 6 buttons on 4 menus and 2 on the 5th. The buttons refer to Chapter points and when finished playing the screen reverts back to the menu the button is on.
Everythig looks good and the preview plays will, both the All Play and Chapters. The Check Project does show two orphan time lines which I can't figure out but shouldn't affect the Build.
However when I try to Build, either to DVD or to Folder, I get the following error message:
"internal software error:\Vobulator\TitlePlanner\CGOPGrouper.cpp, line 145"
I have no idea what this error message is trying to say. But the Build ends there.
If anyone can help me with this most frustrating problem I will be most obliged.
My machine:
OS Name
--Microsoft Windows 7 Home Premium
Version--
6.1.7601 Service Pack 1 Build 7601
System-- Type
x64-based PC
Processor--
Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz, 3060 Mhz, 4 Core(s), 8 Logical Processor(s)
Installed Physical Memory (RAM)
24.0 GB
Total Physical Memory
16.0 GB

One of the less common of the vobulator type errors.
Based on limited info, I would check/consider the following:
Because this is unusual and because you have orphan timelines, I would not worry about trying to idenify a single cause, and I would move to "do over" quickly.
I assume you are using Encore CS6.
Make sure you are "running as admnistrator."
Do not put multiple videos on one timeline.
Do not have any gaps in your videos (e.g. in Premiere).
If you are using dynamic link from Premiere, don't.
It might help for you to post a screenshot of your flowchart.
Are you using overrides? If so, it is much harder for you to get an error free project.
This is the only adobe Encore forum thread I found, and there were no others elsewhere on the web.
http://forums.adobe.com/message/3155616#3155616

Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph

NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it    LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well..   I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayR

Hi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR

Internal software error: .\PGCStreamInfo.cpp, line 1413

Im designing a DVD teaching project within Encore DVD 2.0.0.48678 from the Creative Suite 2 Production Premium software system. The project is very large and complex. As of now there are only 2 separate timelines. 1st time line has 50 chapters. 2nd time line is not finished but currently has 15 chapters. Because its a teaching DVD, there are also chapter play list created for each individual chapter. I also have a countless number of menus and links to sub menus and additional video links from the chapter play list. All of my links are set and operational with all functions in the individual menus working properly. This is an ongoing project for 3 months now, with perfect results prior to today. I have used the "preview from here" function with no problems to test the links and verify the menu structures with flawless results for the past 3 months. Today I was giving a demo of my progress, when I selected the "preview from here" I received this new error message, "internal software error: .\PGCStreamInfo.cpp. line 1413". I have checked and rechecked links, buttons, playlists, chapters, end actions, timelines, basically everything I could imagine and have even tried a computer restore point from 5 days back, at this time still have not resolved this issue.
AMD Athlon 64 3000+
2.01 GHz 1.00 GB of RAM
Microsoft Windows XP Home Edition Version 2002 SP2
Gigabyte GeForce 7300 GT videocard
Thanks for any suggestion, if more info is needed to solve this, i can provide it.

There are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug?

Fatal Internal Error : "ThEvent.cpp", line 209

Hi,
Any help with the following AddRef()/Release() issue would be most appreciated:
I'm a software developer working on a COM (ActiveX) object for use by e.g. C# (test ok) and LabVIEW clients. The object supports events; however, when events are accessed with the "Register Event Callback" block, LabVIEW does not free the object when the VI is finished, and upon subsequently closing LabVIEW, I receive the following dialog:
Fatal Internal Error : "ThEvent.cpp", line 209
LabVIEW version 8.6
You will lose any unsaved work. For assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
and log:
#Date: Fri, Nov 14, 2008 12:44:58 PM
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.6
#AppKind: FDS
#AppModDate: 06/26/2008 05:25 GMT
source\mgcore\ThEvent.cpp(209) : DAbort:
$Id: //labview/branches/Saturn/dev/source/mgcore/ThEvent.cpp#6 $
0x00B129F6 - LabVIEW <unknown> + 0
0x0040F5C0 - LabVIEW <unknown> + 0
0x7719C351 - OLEAUT32 <unknown> + 0
0x7712DB25 - OLEAUT32 <unknown> + 0
0x77EF658C - RPCRT4 <unknown> + 0
0x77EF4BF3 - RPCRT4 <unknown> + 0
0x7717E724 - OLEAUT32 <unknown> + 0
0x77600C31 - ole32 <unknown> + 0
0x77600BDB - ole32 <unknown> + 0
0x7750F237 - ole32 <unknown> + 0
0x7750F15C - ole32 <unknown> + 0
0x7750FC79 - ole32 <unknown> + 0
0x77600E3B - ole32 <unknown> + 0
0x776009BC - ole32 <unknown> + 0
0x77600DF2 - ole32 <unknown> + 0
0x7750FCB3 - ole32 <unknown> + 0
0x7750FAE9 - ole32 <unknown> + 0
0x7E418734 - USER32 <unknown> + 0
0x7E418816 - USER32 <unknown> + 0
0x7E4189CD - USER32 <unknown> + 0
0x7E4196C7 - USER32 <unknown> + 0
0x0041E852 - LabVIEW <unknown> + 0
0x0042AB32 - LabVIEW <unknown> + 0
0x00A27592 - LabVIEW <unknown> + 0
0x00A2DC60 - LabVIEW <unknown> + 0
0x00E3A5B9 - LabVIEW <unknown> + 0
0x008F0FF6 - LabVIEW <unknown> + 0
0x008F0CDA - LabVIEW <unknown> + 0
0x008F0EFB - LabVIEW <unknown> + 0
0x008F0F40 - LabVIEW <unknown> + 0
0x015AB20D - LabVIEW <unknown> + 0
0x7C816FD7 - kernel32 <unknown> + 0
0x00000000 - LabVIEW <unknown> + 0

I've attached a minimal COM server (that starts a thread when events are requested) that shows the issue. Steps to reproduce with LabVIEW 8.6 on Windows XP for x86 follow(stuff in parenthesis are comments):
(1) unzip HelloClass.zip to C:\ (4 files: hello.vi, callback.vi, HelloClass.dll, Hello.tlb)
(2) C:\>regsvr32 helloclass.dll (should get "DLLRegisterServer in helloclass.dll suceeded." dialog)
(3) C:\>hello.vi (start LabVIEW)
(4) Ctrl+R (run the VI. You should see "Command: test" in the String Indicator. At this point the last call into the server is AddRef() but should be Release())
(5) Alt+F4 (close the VI)
(6) Alt+F4 (close LabVIEW)
You may need to perform steps 3-6 up to ~10 times, because at this point one of 3 behaviors randomly occurs:
(A) Fatal Internal Error : "ThEvent.cpp", line 209
(B) Release() is finally called the same # of times as AddRef(), causing the destructor ~HelloClass to run (which kills the thread). This should instead happen after step 4 (which it does if you remove the "Reg Event Callback" block)
(C) Release() is called several times, but not enough to decrement the reference count to 0
Behavior A doesn't occur if the server doesn't start the thread. In source.zip, I've also attached the server's source code for your R&D team along with dbgMon, which is useful for looking at the _RPTF debug output. Thanks much for your patience and for looking at this.
Attachments:
HelloClass.zip ‏84 KB
source.zip ‏173 KB

Internal Error:... vobulator...block planner... line 217 Encore

Similar Messages

Maybe you are looking for