Internal error when implementing extension

Hello everyone
At the moment I create a new contract (transaction RECN) an error occurs and I can not solve.
Someone could help me?
Internal error when implementing extension (see long text)
Message no. RECAAP093
Diagnosis
Call of GET_EXTENSION( ) method for enhancement CL_FILACI_VICN01_EXTENSION failed.
It tried to use an add-on or customer-specific enhancement that is not implemented in your system.
To be able to determine the technical attributes of enhancement CL_FILACI_VICN01_EXTENSION, the RECA_STORABLE_EXT Business Add-In has to supply the desired information. However, this was not the case. In an implementation of RECA_STORABLE_EXT, the GET_OBJNAME_EXT( ) method must supply the required enhancement CL_FILACI_VICN01_EXTENSION.
Below is example code for GET_OBJNAME_EXT( ):
CASE ID_OBJNAME_STD.
WHEN '...'.
APPEND 'CL_FILACI_VICN01_EXTENSION' TO CT_OBJNAME_EXT.
ENDCASE.
For more information, refer to the documentation for the RECA_STORABLE_EXT Business Add-In.
Start BAdI Builder
Procedure
Contact your system administrator.
tks a lot!

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Similar Messages

Graphics tab in REBDBU: Internal error when implementing extension

Hello,
Seek your kind help please.
I have entered in the building master data using REBDBE. We have a tab called Graphics. The pictures etc of the building are uploaded using a software called Korasoft. When i am clicking on the Graphics tab, it is entering the screen but immediately afterwards flashing the following message, "Internal error when implementing extension".
Doing a F1 on the error message shows the foll details:
"Diagnosis
An internal error occurred during the implementation of a customer-specific enhancement. A CHANGE-API module was called with an object reference (parameter IO_OBJECT) that was not instantiated in the required activity for changing (02). The API modules are function modules and begin with API_RE_.
Procedure
Within the BAdI implementation, transfer the parameter IO_OBJECT from the BAdI method directly to the API module. Make sure that the transferred instance is allowed to be changed."
I found that the SAP note 1139014 causes this error message to be generated. Note 1139014 forms a part of support pack level 13 (release 600). Recently we have upgraded our systems from support pack level 8 to support pack level 13. Naturally even this note got implemented at that time.
But now this note is causing this error message and so I will be grateful if someone can please tell me how to rectify the error.
Regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Feb 11, 2009 5:30 PM

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Internal error when accessing a table -

Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
Thomas

These are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors                                    absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8                                                   dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

SM58 : Internal error when accessing a table

Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
Thava

Hi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli

Internal error when deploying a mapping

Helllo,
I am getting an ORA-00600 internal error when I deploy a mapping using the following case statement (case statement executes fine in SQLplus):
CASE WHEN (LINE_CANCEL_FLAG ='Y' OR PO_CANCEL_FLAG = 'Y')
THEN ('Y')
ELSE ('N')
END
If I comment out the "OR" section it deploys without errors:
CASE WHEN (LINE_CANCEL_FLAG ='Y' )
--OR PO_CANCEL_FLAG = 'Y')
THEN ('Y')
ELSE ('N')
END
What am I doing wrong?
(Oracle 9i Warehouse Builder Client 9.2.0.4.0
Oracle 9i Warehouse Builder Repository 9.2.0.2.0
Platform for Application Server: Windows 2003
Platform for database: HP Unix (Risc Processor) V11i)
Thanks

Hello again,
Please observe that I asked whether you pressed the Validate button in EXPRESSION BUILDER (the window that appears every time you click on the ellipsis ... in the property editor for every SQL or PL/SQL expression property), not whether you validated the mapping (as a whole). These are separate things.
The mapping can be validated OK with expression syntax errors, but the mapping PL/SQL code cannot be compiled / deployed.
Regards, Hans Henrik

Error"There was an internal error when submitting the form" URM Disposition

Hello
I get the following error - "*There was an internal error when submitting the form*" - when i allocate a Retention Disposition to a Retention Category.
Any Ideas how this can be solved?
Thank you

Not based on the minimal information provided.
Error messages in 11g, from a UI standpoint, are severely deficient. How about looking in the content server logs and posting some more information?

FM 10 - Serious Internal Error When Copying/Pasting

We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

GR224 Report Painter: Internal error when converting a report

Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna Scamardella

HI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian

Internal error when Internal job posted

Dear all,
We are getting Internal error when employee applies for internal job posting. In E-rec -> employee page-> Apply Directly page, after selecting the requisition when application is posted via send application button, ESS gives error message that
Intenal error occured. Please try again later.
I have checked the SLG1 Log and founc following errors:
Serious error; see log
The error occurred in program CL_HRRCF_POSTING_INST_BL======CM009 line 55
GUID 4DAE37B6BB4400CAE10080000A3C019A is not linked to any posting instance
The error occurred in program CL_HRRCF_POSTING_INSTANCE=====CM00Y line 47
It seems job posting is not done properly. I hve checked the application status and it has Draft status. It should be posted.
Please let me know how to resolve this issue.
Regards,
Mihir.

Dear Deepak,
The issue is, I am not able to post the job. As a result job remains in draft status. So job status can not be released.
I analyzed the issue further and found that this issue is encountered for old users which were present before E-rec gone live.
We have maintained necessary BP, CP, NA objects for these users. But issue is present only in Internal job posting.
Users created after E-rec live does not face this issue.
Is there any perticular table where entries are missing for old employees?
We are having the E-rec system on the same server and BADI HRSYNC_P is activated.
Regards,

Internal error when generating

I was making query of logistics and the following error occured:
Internal error when generating
Message no. AQ_AD_HOC220
Kindly anyone let me know how to solve this problem to run my infoset query.
BR//
Irfan Ahmed

[Note 547594 InfoSet Query: internal error during generation|http://service.sap.com/sap/support/notes/547594]
Why couldn't you find it ?
Edited by: Sandra Rossi on Jan 15, 2009 4:03 PM

WAD-Internal Error when generating the history. Use a different view!

Hello,
When i am trying to open the WAD(Webapplication designer), BEx Open Dialog is being displayed with the message "Internal Error when generating the history. Use a different view"
how to solve this problem...?
Thanks
kumar

Hello Jeff,
Thanks for your help, and it has solved my problem. Under Activate Personalization in BEx...
I have seen 2 more options
-Variable Personalization
-Web Reportperson
Could you inform me the pupose of above 2 options?
Regards..

ACS 4.2 "Internal error" when migrate to Windows 2012 DC

Dear All:
We want to migrate DC 2003 to DC 2012, it 's mixed mode now. At first, We were shutdown the DC 2003 and ACS 4.2 sometimes got error "Internal error" when user couldn't access network in VPN or Wireless but not all of users. Finally, We open the DC 2003 ASAP, user can login at once. the error doesn't appear again. it is so weired. We had validated it can work with ACS 4.2 separately in windows 2012 or 2003 DC not mixed in Lab before migration. it seems to depend on DC 2003, we don't know how to do next step. Have anyone share about solve the situation? Thanks a lot.

Update the ACS version to newer releases to work with win 2012. please check the link for the information:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4-2/installation/guide/windows/IGwn42/install.html#wp1041376

Reader X: Internal error when copying to clipboard

I get an "internal error" copying to clipboard (Reader 10.1.1, Windows 7 64-bit) when TightVncviewer (V2.0.4) is running simultaneously.
I assume TightVncviewer monitors the clipboard to copy the actual content to the remote machine.
Closing TightVncviewer resolves the issue. However, I need to use that tool frequently so that's an annoying bug.
As a workaround, I downgraded to Reader 9.

From: Ankit_Jain [email protected]
Sent: Monday, February 27, 2012 8:58 AM
To: TAGold
Subject: Adobe Reader X internal error when opening PDF that worked with 9
Re: Adobe Reader X internal error when opening PDF that worked with 9
created by Ankit_Jain <http://forums.adobe.com/people/Ankit_Jain> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/4232243#4232243

Internal Error when viewing an activity in E-Rec after a username change

Hello,
Hereu2019s a brief explanation of the scenario that we are in:
u2022 We created a new User ID for an employee because of his/her name
change.
u2022 We then attached this new User Id to her HR master records using Info
Type 105 (IT0105) subtype 1 (ST01).
u2022 This employee already had her previous User ID attached to his HR
master records using the same IT0105 ST01. So now, this employee has 2
IT0105 ST01 records.
u2022 We transferred these records (old and new ids) to E-Recruiting via
ALE process.
To do this ALE process, we executed RBDMIDOC program on the system
where our HR Master Data reside.
u2022 Then in our e-recruiting system, we executed RBDAPP01 to process
these idocs.
u2022 This processing delimited the old User ID and created a new User ID
for the same person in the e-recruiting system. We can view this
relationship in HRP1001.
u2022 Now, prior to her name change, this person had performed some
activities on a candidateu2019s records in E-Recruiting. Obviously, these
activities were performed with his old user ID. So those activities
have the old user ID associated with them.
u2022 After sending the new User Id in e-recruiting, when we go to view
those candidate activities in candidate overview, the system throws the
internal error message.
The format that we use for creating usernames is last name first letter of first name, i.e. Bob Jones would look like JONESB.
At present the only way to remedy the situation is to have the recruiter who's name (and username) changed manually change it for each activity.
After opening up a message with SAP they responded with:
Dear Customer,
That's right. The reason why this recruiter doesn't see his/her
activities is because they were created under a different user.
E-Recruiting is designed with a stable CP-US relationship. If you
do a delimination this can cause problems for the recruiter (as
mentioned above) as in IT5131 the user is stored as team member.
If the user assigned to a CP changes, the responsible candidate class
cannot be instanced anymore. So we strictly recommend not to delimit theCP-US relation.
Has anyone else experienced the problem? How did you address it? It has been my experience to use the name of the employee when creating a username. This has never been a problem in our core system, just in E-Recruiting.
Thank you for your help!
Regards,
Ryan

DonSu,
You have to look at the line above it to gather what's happening. As I mentioned it making a call to get the contents of the Data Source using GetDataSourceContents. What you might try is making the same call using Microsoft APIs and PowerShell.
http://technet.microsoft.com/en-us/library/reportservice2010.reportingservice2010.getdatasourcecontents.aspx
[string]$folderDestination = "/<Path to Data source>"
[string]$webServiceUrl = "https://EnterURLhere/ReportServer/ReportService2010.asmx"
$ssrsProxy = New-WebServiceProxy -Uri $webServiceUrl -UseDefaultCredential
$DatasourceContent = $ssrsProxy.GetDataSourceContents($folderDestination)
$DataSourceOutput = $DatasourceContent | Select-Object ConnectString, Extension, Enabled, UserName, WindowsCredentials, CredentialRetrieval
Write-Output $DataSourceOutput

Error:-"Internal error when converting a recurrence documentu201D

Hello ISU Experts,
For customer I am trying to create a new BBP with transaction EA61. This is done without any errors until I try to save the new BBP. Then I receive the following error:
u201CInternal error when converting a recurrence documentu201D
Kindly help me in resolving this issue so that customer can receive their BBP.
Thanks in advance
Shabnum

Hello,
Have you tried to do a note search for error >4011 "Internal error in converting a repetition document"
Here are some I found......please see which is relevant for your system and implement them...
367152
131335
410434
571098
561664
569037
566972
402934
565100
155572
153495
553711
203706
183259
170406
182403
619942
700304
855780
214947
I hope this helps...
Regards
Olivia

Internal error when implementing extension

Similar Messages

Maybe you are looking for