internal error Workbook storage fault: 310

Hi matez,
I obtain the below mentioned error when I attempted save my query as a workbook
 <internal error> Workbook storage fault: 310
Kindly advice

Hi,
Note 592918 has all the answers for you, it's an authorisation problem !
Kind regards, Patrick Rieken.
Note 592918:
Symptom:
When you open BW workbooks, one of the following error messages "Workbook storage fault: 1310", "<internal error> document storage 310" or "<internal error> Workbook storage fault: 310" appears. The workbook does not appear.
Other terms
Business Explorer, 30A, 30B, 31C, workbook, 1310, 310
<internal error> workbook storage fault : 310
workbook storage fault: 1310
<internal error> document storage 310
Reason and Prerequisites
The user has no authorization object S_GUI with the activities 60 (Import) and 61 (Export).
Solution
Authorization for opening and saving BW workbooks
 1. Start role maintenance transaction (PFCG)
 2. Select role
 3. Choose "Change" button
 4. Select tab "Authorizations"
 5. Choose "Change authorization data"
 6. Choose "+ manually"
 7. Enter "S_GUI" as "authorization object"
 8. Expand "Authorization for GUI activities"
 9. Under "Activity", select at least "60" (import) and "61" (export)

Similar Messages

Upgrade 3.1- 7.0: internal error Workbook storage fault (read/open)

Dear all,
after upgrading an 3.1 (SP12) BW-system to BI 7.0 (SP15) the following error occures when we want to open existing BEx workbooks (in the BEx Analyzer 3.x):
<internal error> Workbook storage fault (read/open)
We have found out, that this refers only to those BW workbooks being created in BW 2.x and not modified ever since. Thus this actually seems to be an 2.x->7.0 issue.
Scope of our projekt it not the use of any new BI function, we are just upgrading the system.
Unfortunately some (but not all) workbooks do not run any more now. Checking existing SAPnotes has not helped yet unfortunately.
I saw very similar problems on this forum, if there is a solution, please provide it to us urgently.
THANKS for helping
Frank

Hello Venkat,
thanks for helping. Since I work with SAP_ALL authorization, I do not think this issue is related to missing auth. objects. The error message desribed above is withoutan number-ID, that´s why it is different than those described in the mentioned notes.
It definitely is related with the upgrade, as I can open those "corrupt" workbooks originating from BW 2.x in the productive system (still on BW3.1).
Any more suggestions?? Who remembers the 2.x - 3.x upgrade of BEx workbooks?
Thanks, Frank
null

Internal error workbook storage fault 330

Hi All
Trying to save a new workbook in a role i created.
Anyone know why I am getting this error. I have seen many solutions for error 310 but not 330.
The role has S_GUI and S_USER_AGR with full authorisation on each.
Anyone know what is missing for the 330 fault.
Cheers
Andy

i solved this with the following
S_GUI (60, 61)
S_USER_AGR (1, 2, 3 , 6)
S_RS_COMP
S_RS_COMP1 (full)
The 2 S_BDS objects (full)
S_USER_TCD with transaction RRMX

Workbook storage fault: 310

Hi there,
im trying to give authorizations to a user to work (open and explore) with a workbook...
When i open bexanaliser every thing look fine, but when i tried to open the workbook it gives me the message: "internal error Workbook storage fault: 310"
is there something missing that i dont understand...
ideas??
Thanks,
GPC

Solve the problem....
authorization S_GUI in the transaction PFCG (profiles)
GPC

Workbook storage fault

Hello,
We are using BEx 3.5, and we have a problem with a few workbooks saved in Excel 2003.
When we try to open the workbooks with Excel 2007, we get the following message:
"Workbook storage fault(read/open)"
The problem occurs in workbooks with VB code that we added.
Thank you.

Hi,
You have all the information in the following discussion: http://scn.sap.com/thread/76613
Or in the OSS Note Prashanth has just said.
By the way, did you solve your issue?

Internal Error - Unable to generate SQL for this Scheduled Workbook

I am encountering the following error when loading the results of a Scheduled Workbook;
Internal Error - Unable to generate SQL for this Scheduled Workbook (If you scheduled this workbook using a previous version of Discoverer, please reschedule and re-open)
This only happens for one of the scheduled workbooks and I am struggling to find an explanation to the problem. There are no reference to database links in the workbook so I can rule that out as a cause.
Does anyone have any suggestions to what might be causing the problem?
Many thanks
Stewart

Hi,
The version is OracleBI Discoverer Plus Version 10.1.2.48.18. Do you think this has anything to do with it?If you are on this version, then you have the recommended patches applied.
Did you try to reschedule the workbook and see if this helps in resolving the issue?
I would suggest you enable server logging as this may help in collecting more details about the error.
Note: 403689.1 - How To Generate Discoverer 10g (10.1.2) Session Server Logs In Text Format
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=403689.1
Regards,
Hussein

Storage VIs internal error, TDMS file

I use LabView 8.5.1, DAQmx 9.0.2. and a module NI-USB6216.
I configure on my application a task as follows: 15 channels activated with a sample rate of 1sample/10s (very slow). My acquisition has to run for a few days or more.
Sometimes, I obtain the error "Storage VIs internal" error (code -2500). then I cannot read my TDMS file (see attached the file) and I cannot treat my data.
Do you know the exact meaning of this error on the case of a TDMS file. Do yo have a solution to treat my data?
Best regards, Daniel.
Solved!
Go to Solution.
Attachments:
Data.zip ‏436 KB

I tried with LabVIEW 2010 and didn't see the problem when reading your attached TDMS file.
Please download the latest TDMS installer from here:
http://zone.ni.com/devzone/cda/tut/p/id/9995
Please backup tdms.dll on your computer like in c:\program files\national instruments\shared\tdms\ and then run the installer.

TS4185 downloaded facetime on imac computer but get "internal error "message fault. I downloaded the MACOSx10.6.7 upgrade

downloaded facetime on imac but get internal error .Downloaded upgrade 10.6.7 but get the same results

Did you figure this out? I have the same issue!!

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Studio 12 DBX internal error while memcheck is on.

bash-3.00$ dbx -xexec32
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.6' in your .dbxrc
(dbx) -rwxr-xr-x 1 orbit osgrp1 1.2M Dec 26 17:18 <my_processnmae>
-rwxr-xr-x: not found
(dbx) dbxenv mt_sync_tracking off
(dbx) attach 6792 <this is pid>
Reading <my_processname>
Reading ld.so.1
Reading librtc.so
Reading libmapmalloc.so.1
Reading libcurses.so.1
Reading libnsl.so.1
Reading libsocket.so.1
Reading libelf.so.1
Reading libcrypt_i.so.1
Reading libpthread.so.1
Reading libdl.so.1
Reading librt.so.1
Reading libc.so.1
Reading libgen.so.1
Reading libaio.so.1
Reading libmd5.so.1
Reading libc_psr.so.1
Reading library_name**
Reading library_name**
Attached to process 6792 with 3 LWPs
t@1 (l@1) stopped in soaccept at 0xff040314
0xff040314: soaccept+0x0004: ta %icc,0x00000008
Current function is Tcp_receive
284 if ((th_data->sockfd = accept (sockfd, (struct sockaddr *)&clientaddr,&length)) == -1)
(dbx) check -access
access checking - ON
RTC: Enabling Error Checking...
RTC: Running program...
(dbx) cont
RTC: internal RTC error -- disabling Error Checking file: rtc_heap_map.c line: 697
^Ct@2 (l@2) signal INT (Interrupt) in ___sigtimedwait at 0xff040220
0xff040220: ___sigtimedwait+0x0004: ta %icc,0x00000008
Current function is sig_thr
1256 sigwait (&glb_sigact, &signal_alr);
(dbx) version
Machine hardware: sun4u
OS version: 5.10
Processor type: sparc
Hardware: SUNW,Sun-Fire-280R
The following components are installed on your system:
Sun Studio 12
Sun Studio 12 C Compiler
Sun Studio 12 C++ Compiler
Sun Studio 12 Tools.h++ 7.1
Sun Studio 12 C++ Standard 64-bit Class Library
Sun Studio 12 Garbage Collector
Sun Studio 12 Fortran 95
Sun Studio 12 Debugging Tools (including dbx)
Sun Studio 12 IDE
Sun Studio 12 Debugger GUI
Sun Studio 12 Performance Analyzer (including collect, ...)
Sun Studio 12 X-Designer
Sun Studio 12 VIM editor
Sun Studio 12 XEmacs editor
Sun Studio 12 Performance Library
Sun Studio 12 LockLint
Sun Studio 12 Building Software (including dmake)
Sun Studio 12 Documentation Set
Sun Studio 12 /usr symbolic links and GNOME menu item
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.9 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.9 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.3 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/dbx": Sun Dbx Debugger 7.6 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.6 SunOS_sparc 2007/05/03
version of "/opt/SunStudio12/SUNWspro/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.8 SunOS_sparc 2007/05/03
any Idea ?
am i doing something wrong here. ? I want to check memory leak. ?
-Raxit

With hope if its bug, below may helpful.
(dbx) (dbx) (dbx) quit
detaching from process 6792
dbx: internal warning: function (__rtc_release_heap_region) called too early (preloading)
t@3 (l@3) signal SEGV (no mapping at the fault address) in _sleep at 0xff0330f0
0xff0330f0: _sleep+0x0078: ldsb [%o3 - 3005], %o2
Current function is scansessionisam_thr
1362 sleep (cfg_sec_shm_scantime); /*SCF no 10750 */
execution completed, exit code is 4982056
dbx: internal warning: rtc: _syscall: failed
dbx: warning: librtc.so and dbx version mismatch; Error checking disabled
Check your installation of librtc.so.
dbx: internal warning: rtc: munmap of patch area of segment '/usr/lib/libmapmalloc.so.1' failed
dbx: internal error: signal SIGSEGV (no mapping at the fault address)
dbx's coredump will appear in /tmp
ls -lrAbort (core dumped)
bash-3.00$ pstack /tmp/core
core '/tmp/core' of 6794: dbx -xexec32
ff1c0f90 lwpkill (6, 0, ff1a4a98, ffffffff, ff1e8284, 6) + 8
ff13ff98 abort (0, 1, 377d74, a83f0, ff1eb298, 0) + 110
000b5bf8 ???????? (b, 3c4400, 4575a1, 38b1f4, 37eabe, 1)
ff1bfec8 __sighndlr (b, ffbff408, ffbff150, b59ec, 0, 1) + c
ff1b4ff4 call_user_handler (b, 0, 8, 0, ff252000, ffbff150) + 3b8
001aef98 __1cGRtcMgrShandle_proc_detach6M_v_ (47d670, 5dd2a8, 38, 396000, 4c0498, 38) + d8
0018f850 __1cEProcGdetach6Mbbbb_v_ (4c0468, 467400, 466400, 0, 3ae2ac, 0) + 19c
000b8c68 ???????? (47e6f8, 0, 0, 0, 0, 1)
00289d94 __1cMpdksh_c_exit6FpnGInterp_ippcpv_i_ (47e6f8, 0, 876890, 0, 0, 466000) + a8
0015fbf4 ???????? (47e6f8, 1, 876890, 0, 877b78, 0)
002857a0 ???????? (47e6f8, 877b78, 877b58, 876890, 0, 467708)
0028468c __1cNpdksh_execute6FpnGInterp_pnCop_i_i_ (47e6f8, 49bab8, 0, 277c50, 47e6f8, 38b1f4) + 194
002735e0 __1cLpdksh_shell6FpnGInterp_pnGSource__i_ (47e6f8, 49e098, 465628, 446f54, 3d9625, 3d962c) + 46c
000b90d4 __1cNmain_cmd_loop6FpnGInterp__v_ (47e6f8, 37f400, 3ca2a4, 446f70, 3ca000, 3ca000) + 88
000b9e60 main (37e400, 0, 40, 47e6f8, 37f7c8, 1) + 750
000af268 _start (0, 0, 0, 0, 0, 0) + 108
bash-3.00$
bash-3.00$ dbx /opt/SunStudio12/
SUNWspro/ uninstall_Sun_Studio_12.class
bash-3.00$ dbx /opt/SunStudio12/SUNWspro/bin/dbx /tmp/core
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.6' in your .dbxrc
Reading dbx
core file header read successfully
Reading ld.so.1
Reading libintl.so.1
Reading libnsl.so.1
Reading libsocket.so.1
Reading libdl.so.1
Reading libgen.so.1
Reading libw.so.1
Reading libm.so.1
Reading libc.so.1
Reading libc_psr.so.1
Reading libcpc.so.1
Reading libpctx.so.1
Reading libnvpair.so.1
Reading libdevinfo.so.1
Reading libproc.so.1
Reading librtld_db.so.1
Reading libelf.so.1
Reading libctf.so.1
program terminated by signal ABRT (Abort)
0xff1c0f90: __lwp_kill+0x0008: bcc,a,pt %icc,__lwp_kill+0x18 ! 0xff1c0fa0
(dbx) threads
dbx: thread related commands not available
(dbx) where
=>[1] __lwp_kill(0x0, 0x6, 0x0, 0x6, 0xfc00, 0x0), at 0xff1c0f90
[2] raise(0x6, 0x0, 0xff1a4a98, 0xffffffff, 0xff1e8284, 0x6), at 0xff15fd78
[3] abort(0x0, 0x1, 0x377d74, 0xa83f0, 0xff1eb298, 0x0), at 0xff13ff98
[4] 0xb5bf8(0xb, 0x3c4400, 0x4575a1, 0x38b1f4, 0x37eabe, 0x1), at 0xb5bf8
[5] __sighndlr(0xb, 0xffbff408, 0xffbff150, 0xb59ec, 0x0, 0x1), at 0xff1bfec8
---- called from signal handler with signal 11 (SIGSEGV) ------
[6] RtcMgr::handle_proc_detach(0x47d670, 0x5dd2a8, 0x38, 0x396000, 0x4c0498, 0x38), at 0x1aef98
[7] Proc::detach(0x4c0468, 0x467400, 0x466400, 0x0, 0x3ae2ac, 0x0), at 0x18f850
[8] 0xb8c68(0x47e6f8, 0x0, 0x0, 0x0, 0x0, 0x1), at 0xb8c68
[9] pdksh_c_exit(0x47e6f8, 0x0, 0x876890, 0x0, 0x0, 0x466000), at 0x289d94
[10] 0x15fbf4(0x47e6f8, 0x1, 0x876890, 0x0, 0x877b78, 0x0), at 0x15fbf4
[11] 0x2857a0(0x47e6f8, 0x877b78, 0x877b58, 0x876890, 0x0, 0x467708), at 0x2857a0
[12] pdksh_execute(0x47e6f8, 0x49bab8, 0x0, 0x277c50, 0x47e6f8, 0x38b1f4), at 0x28468c
[13] pdksh_shell(0x47e6f8, 0x49e098, 0x465628, 0x446f54, 0x3d9625, 0x3d962c), at 0x2735e0
[14] main_cmd_loop(0x47e6f8, 0x37f400, 0x3ca2a4, 0x446f70, 0x3ca000, 0x3ca000), at 0xb90d4
[15] main(0x37e400, 0x0, 0x40, 0x47e6f8, 0x37f7c8, 0x1), at 0xb9e60
(dbx)
-Raxit

Flash Builder 4.5 Data Services Wizard, setting up REST service call returns Internal Error Occurred

Dear all -
I am writing with the confidence that someone will be able to assist me.
I am using the Flash Builder Data Services Wizard to access a Server that utilizes REST type calls and returns JSON objects. The server is a JETTY server and it apparantly already works and is returning JSON objects (see below for example). It is both HTTP and HTTPS enabled, and right now it has a cross-domain policy file that is wide open (insecure but its not a production server, it's internal).
The crossdomain file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
 <allow-http-request-headers-from domain="*" headers="*" secure="false" />
 <allow-access-from domain="*" to-ports="*" secure="false"/>
 <site-control permitted-cross-domain-policies="master-only" />
</cross-domain-policy>
The crossdomain file is in the jetty server's root directory and is browseable via HTTP and HTTPS (i.e. browsing to it returns the xml)
Now before all of you say that using wizards sucks (generally) I thought I would utilize the FB Data Services Wizard as at least it would provide a template for which I could build additional code against, or replace and improve the code it produces.
With that in mind, I browse to the URL of the Jetty Server with any web browser (for example, Google Chrome, Firefox or IE) with a URL like this (the URL is a little confidential at the moment, but the structure is the same)
https://localhost:somePort/someKey/someUser/somePassword/someTask
*somePort is the SSL port like 8443
*someKey is a key to access the URL's set of services
returns a JSON object as a string in the web browser and it appears like the following:
{"result":success,"value":"whatEverTheValueShould"}
Looks like the JSON string/object is valid.
I went through the Flash Builder Data Services Wizard to set up HTTP access to this server. The information that I filled in is described below:
Do you want to use a Base URL as a prefix for all operation URLs?
YES
Base URL:
https://localhost:8443/someKey/
Name : someTask
Method : POST
Content-Type: application/x-www-form-urlencoded
URL : {someUser}/{somePassword}/someTask
Service Name: SampleRestapi
Services Package: services.SampleRestapi
datatype objects: valueObjects:
Completing the wizard, I run the Test Operation command. Remember, no authentication is needed to get a JSON string.
It returns:
InvocationTargetException: Unable to connect to the URL specified
I am thinking - okay, but the URL IS browseable (as I originally was able to browse to it, as noted above).
I continue to test the service by creating a Flex application that accepts a username and password in a form. when the form is submitted, the call to the service is invoked and an event handler returns the result. The code is below (with some minor changes to mask the actual source).
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 xmlns:SampleRestapi="services.SampleRestapi.*"
 minWidth="955" minHeight="600">
 <fx:Script>
 <![CDATA[
 import mx.controls.Alert;
 import mx.rpc.events.ResultEvent;
 protected function button_clickHandler(event:MouseEvent):void
 isUserValidResult.token = SampleRestAPI.isUserValid(userNameTextInput.text,passwordTextInput.text);
 protected function SampleRestAPI_resultHandler(event:ResultEvent):void
 // TODO Auto-generated method stub
 // print out the results
 txtAreaResults.text = event.result.message as String;
 // txtAreaResults.appendText( "headers \n" + event.headers.toString() );
 ]]>
 </fx:Script>
 <fx:Declarations>
 <SampleRestapi:SampleRestAPI id="SampleRestAPI"
 fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
 result="SampleRestAPI_resultHandler(event)"
 showBusyCursor="true"/>
 <s:CallResponder id="isUserValidResult"/>
 
 </fx:Declarations>
 <s:Form defaultButton="{button}">
 <s:FormItem label="UserName">
 <s:TextInput id="userNameTextInput" text="q"/>
 </s:FormItem>
 <s:FormItem label="Password">
 <s:TextInput id="passwordTextInput" text="q"/>
 </s:FormItem>
 <s:Button id="button" label="IsUserValid" click="button_clickHandler(event)"/>
 <s:FormItem label="results:">
 <s:TextArea id="txtAreaResults"/>
 </s:FormItem>
 </s:Form>
</s:Application>
It's a simple application to be sure. When I run it , I get the following returned in the text area field txtAreaResults:
An Internal Error Occured.
Which is equivalent to the following JSON string being returned:
{"success":false,"value":"An Internal Error Occured"}
It appears that the call is being made, and that a JSON object is being returned... however it does not return the expected results?
Again the URL constructed is the same:
https://www.somedomain.com:somePort/someKey/someUser/somePassword/someTask
So I am wondering what the issue could be:
1) is it the fact that I am browsing the test application from an insecure (http://) web page containing the Flex application and it is accessing a service through https:// ?
2) is the JSON string structurally correct? (it appears so).
3) There is a certificate enabled for HTTPs. it does not match the test site I am using ( the cert is for www.somedomain.com but I am using localhost for testing). Would that be an issue? Google Chrome and IE just asks me to proceed anyway, which I say "yes".
Any help or assistance on this would be appreciated.
thanks
Edward

Hello everyone -
Since I last posted an interesting update happened. I tested my Flex application again, it is calling a Jetty Server that returns a JSON object, in different BROWSERS. I disabled HTTPS for now, and the crossdomain.xml policy file is wide open for testing (ie. allowing every request to return data). So the app accessing the data using HTTP only. Browsers - IE, Opera, Firefox and Chrome. Each browser contained the SAME application, revision of the Flash Player (10.3.183.10 debugger for firefox, chrome, opera, safari PC; 11.0.1.129 consumer version in IE9,) take a look at the screen shot (safari not shown although the result was the same as IE and chrome)
Note that Opera and Firefox returned successful values (i.e. successful JSON objects) using the same code generated from the Data Services Wizard. Chrome, IE and, Safari failed with an Internal error. So I am left wondering - WHY? Is it something with the Flash Player? the Browsers? the Flex SDK? Any thoughts are appreciated. Again, the code is found in the original thread above.

Internal error: "memory.cpp", line 593 with PXI 8175

Hi,
I have created a program with Labview RT 7.0 which makes acquisition, storage and display of data with PXI controllers 8175.
I used Datasocket for the data display on a deported computer.
Because of the number of the Datasocket tags used, instead of sending values all the time, I'm sending value for the deported computer only if the user needs to see it.
For example : if the user needs to see data, so only Datasocket tags for data display will be active, and if the user needs to see parameters values, so only parameters datasockets tags will be active. And, if the display program is in "standby" mode, almost all datasocket aren't active.
So when the user needs to see data values, he opens the data values window of the display program, and then, the datasockets tags for data value are now active, but : sometimes at this moment, the PXI stops with an "internal error "memory.cpp" line 593"!
The only solution is to manually reboot the PXI, the programmatically reboot doesn't work in this case of error. But it is far away from the displaying computer.
The error happens regularly after a 2 weeks period of standby. So I though about a memory overflow, I checked all the arrays, and none of them is growing to the infinity.
If someone knows about this problem, I will be very happy to learn about how to get rid of it!!!
Best Regards,
G Liagre
Best regards,
G Liagre

Hi Rob, Hi Matthieu,
Thank you for your reply.
I found in the database many reply about this error, but none of them were helpfull for me.
I tryed your link to the knowledge data base, but the error described there is for dll association in LabView and interface nodes.
I didn't used any interface node in my code.
The problem is that I cannot test my program on the PXI because I don't have access to it rightnow (only by remote desktop, and with a 56k modem..)
Let me give you a part of this huge code.
I suspect this part of the code to be the one which create the problem, but it's not sure.
If you find something obviously wrong, tell me!
Best regards,
G Liagre
Best regards,
G Liagre
Attachments:
Communication.zip ‏931 KB

Remote Desktop Connection - internal error

My laptop is running Windows 8.1 and since yesterday has starting giving problems when connecting to remote PCs using Remote Desktop Connection.
It asks for the password and then shows 'Configuring remote session' for about 30 seconds and then displays 'An internal error has occurred'. Another PC on the same network is able to connect to the remote PC without problem. I've tried connecting
to four other PCs with this laptop and two work and three don't.
I've tried changing various settings such as bitmap caching and clipboard sharing etc. Nothing makes a difference.
I've also used system restore to reverse recent windows updates and that hasn't helped either.
Any ideas?
What can cause 'An internal error has occurred'? Will it be writing to a log somewhere that I can look at to find further information about the error?
Thanks
Andy

I'm not sure if you meant there could be a problem with the user profile on the laptop or the one on the server I'm trying to connect to?
However, it seems to be the latter. I just created a new user account on the server and can now remote into it from my laptop. If I try the original user account again (Administrator) then I get the internal error message. Other client
PCs can still log-in to the server using the same Administrator account without problem.
Is there something I can do (either to client or server) to clear the fault with the Adminstrator account without wiping that account on the server?

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

internal error Workbook storage fault: 310

Similar Messages

Maybe you are looking for