Internal File Delivery Channel not working..

Hi,
I have configured a Trading partner to poll for a file and write into a SFTP Server with Internal delivery channel as SFTP Protocol. This is working fine on dev instance. However, when I exported the same configuration to test instance (SFTP credentials are different for test and dev. But that is taken care of in configuration) the same is not working.
Strangely, I don't see any error also in B2B log file and business message status report shows the transaction as successful, which means that file has been transferred. But I don't see the file on SFTP server.
What could be the possible reasons. Can someone help me here.
Thanks,
Phani

Hi Anuj,
Thanks for the reply -
So you should have property oracle.tip.adapter.b2b.appTransportTraceLogLevel set to "DEBUG" in tip.properties file - Yes
an+d b2b_idc_transport.log should show you the errors+. If it does not raise a case with support. - No. b2b_idc_transport is of 0 kb and is not getting updted.
Which authentication are you using - password or public key? - I am using a password
Did you try command line SFTP from Test B2B box to SFTP box? Are you able to do so? - Yes I did try and am able to connect to the SFTP box from B2B Unix box.
Thanks,
Phani

Similar Messages

Left channel not working--it's a logic problem, but I can't debut it! HELP!!!

I'm using a SB Audigy SE card on my XP machine. In the past, I've made good music files from CDs and records (remember those?), but I have not used the thing in about 18 months, and now I'm having a weird problem.
I get output only on the LEFT channel. I'm sure it's not a problem with the input source, because I've used a cassette player and a turntable, and with both, I get output only on the left channel. This happens even when I reverse the phono cables from either device. That tells me the problem is not in the cabling leading from my device to the SB card.
I checked the speakers using the Audigy Speaker Settings application, and it shows that both speakers are working properly: when I click on CHANNEL, I get the words "left channel" and then "right channel" successively on the proper speakers. Same when I click NOISE.
This shows me that the problem is not on the (physical) output side: if it were, I would not get the words "left channel" on that channel, and then the words "right channel" on the right channel. As well, I can play videos (e.g. Youtube) and get sound on both channels.
My guess is that somehow there is some setting somewhere in Audigy that is saying "process only output to the left channel." But I cannot find any setting that might be doing that.
Anyone got any ideas???? I'm stumped.

Originally Posted by deafguy999
OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
ALSO, CDs play properly--and my speakers are connected only to the sound card.

I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

Hyperlink to file in JSP not working

I have a JSP page where I am providing a hyperlink to a file on the C: drive as follows
Try this
Nothing happens when I click this hyperlink.
When I scroll over the hyperlink I see the correct path "file:///C:/ReqImport/data.txt" in the status bar and when paste this path in my address bar, it does open up the file.
Any ideas why this file hyperlink does not work on this JSP page.
Thanks

Hmm, you're right, I just tried it and it doesn't appear to work. It looks like a security thing: If the original page is on my hard drive, links to other files on my hard drive work. But when the original page is on a web server, links to files on my hard drive don't appear to work.
Do you realize that such a link is referring to a file on the C: drive of the client, the user, not the C: drive of the server? I'm not sure what you're up to, but for most applications such a link is pretty much useless, as you normally have no way of knowing what files the user has on his C: drive.

Include file in jsp not working

Hi ,
I have an include file statement in my jsp file which is not working. Not getting any error message either only the page is displayed without the jsp file included.
My include code looks like this :
<%@ include file ="Includes/hello.jsp" %>Also i tried including an html file or an image in the same place neither of the two displayed.

My jsp file is hosted on IIS

nb123 wrote:My jsp file is hosted on IIS
Hi ,
I have an include file statement in my jsp file which is not working. Not getting any error message either only the page is displayed without the jsp file included.
My include code looks like this :
<%@ include file ="Includes/hello.jsp" %>Also i tried including an html file or an image in the same place neither of the two displayed.

My jsp file is hosted on IIS
Check the path you've specified. It may well be;
<%@include file="hello.jsp" %>or
<%@include file="/Includes/hello.jsp" %>

File conversion is not working

File conversion is not working.

Using online services and it simply times out. I login and upload the file
I want converted and it takes 5 mins or longer and then simply says the
file conversion failed.
I got one file to work, but it took like 12 tries.
Very annoying and it's impossible to call and get a tech person to help.
On Tuesday, February 11, 2014, PECourtejoie <[email protected]

File sharing is not working from pc to imac os x 10.9.2

file sharing is not working from pc to imac os x 10.9.2

Hello there Karen,
It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
Soft reset
Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
From the AirPort menu bar item, choose the network created by the device (the network name does not change).
Open AirPort Utility from Applications > Utilities.
Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
Quit AirPort Utility.
Hard reset
Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
Release the button and the device will reset.
Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
Select the base station from Other Wi-Fi Devices, then click Edit.
Select the Other Options button.
Select "Restore previous settings" and click Next until you get to the final window.
AirPort Utility will indicate that Setup is complete. Click Done.
Quit AirPort Utility.
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

File manager still not working w 10.7.3combo

Since installing lion (I started with 10.7.2) file manager is not working. Yes, I can force uit it and than it does but it is still very annoying and time consumin to do it 2-4 times a day. I was hoping that 10.7.3 will solv it. Than installed based on advice I received hee 10.7.3 compbo but the problem is still there.
Do you know or have you run accross a thread that explains how to solve it?
Advanced thats to anyone who can help
Ruvy

What is "file manager?" Is that a piece of third-party software, or are you referring to the Finder? If it's third-party software, you'll need to contact the developer for an update or fix. If the Finder is not working (how is it not working?), then you could try some of the tips in Understanding upgrade nightmares.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

Left rear channel not working - Xfi

My left rear channel is not working. Its not the speakers nor the connections, its the soundcard (Xfi XM). I know this because I switched the front/rear connections to test them and the same problem?channel did not work. The problem is in both Vista and XP, so its not the software/drivers either. Any solution to this? Thanks.

Originally Posted by deafguy999
OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
ALSO, CDs play properly--and my speakers are connected only to the sound card.

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

The Open URL or File function is not working when I publish as a exe?

The Open URL or File function is not working when I publish as a exe. I have tried putting the exe in the same location as the files with no luck. How do I get the buttons to function properly with a exe file.

Have you set the Publish folder as a trusted location in Flash Global Security?
If not, please read this post:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
It may explain your issue.

MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please help

Quote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents.

[svn:bz-3.x] 5036: Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS /3.x branch.

Revision: 5036
Author: [email protected]
Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
Log Message:
Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-347
Modified Paths:
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

Revision: 5036
Author: [email protected]
Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
Log Message:
Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-347
Modified Paths:
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

File Sender Communication Channel not working

Hi All,
We have one file sender channel which sends file after every 3 hours.
But currently it has stopped the processing of file.
If we see in RWB it shows that "Correctly configured and started",but if we start and stop the chanel it doesnt show any processing started message.
File is there in the folder but the channel doesnt poll the folder to pick up the file.
We have refreshed the cache and activated the channel again.
But still no luck,does anybody have any idea?

Hi Shweta,
Please check the parameters of your File adapter. There can be following possibility if File adapter is not picking the file :
1. File adapter is not active
2. Incorrect File name, Directory name or path,
3. File does not exist in the source directory.
4. If you are accessing file from other server (use FTP protocol) check you have READ and WRITE access.
Thanks
Farooq.
<b>*Rewards points if you find it useful*</b>

Internal File Delivery Channel not working..

Similar Messages

Maybe you are looking for