Internal hard drive for use as scratch disk

Am running OS 10.4.11 on a dual core 2.3 Ghz PowerPC G5. Want to install a 2nd internal hard drive for use as a scratch disk w/ FCP and for my media files, etc. Given that I can only accomodate an SATA I drive w/ 150 Gbps transfer rate what might some decent choices be for a 500 Gb to 1 TB drive suited for video (and a PowerPC G5)? I'll also be adding an external drive for backup if anyone has any suggestions.

Thanks for the recommendations. I had been looking at the Hitachi CinemaStar series but you have to reset the drive to SATA 1 for use w/ a G5 PowerMac. Resetting the drive, according to Hitachi, can only be done on a PC which I don't have access to. And I think that holds true for all their drives that are not strictly SATA 1.

Similar Messages

For Curt Y......I'm using a internal hard drive for scratch

I've set my extra, internal hard drive for scratch....not using system drive.

Dreamit, please continue the dicussion in your original topic: http://forums.adobe.com/message/4557660#4557660

Internal hard drive does not mount in disk utility

My internal hard drive no longer mounts in Disk Utility. It is grayed out. I have extraordinarily frequent spinning beach ball/freezes, in Safari or Apple Mail. The most recent symptom: upon rebooting or just starting up, I see flashing black on the display. This has been occuring for more than six months. Of course, I have made total and frequent backup's. I bought new RAM, but have not yet installed it, and I susect this might help. I have done repeted troubleshooting many times each: Apple's Disk Doctor, Repaired Permissions, Reinstalled the Mac OS, safe boot, Alsoft's Disk Warrior, Apple's longer Harware Test, etc. I have worked as a new user, too. All tests done report that all is well. What od you thnk the problem is? Must I drive 1.5 hrs. each way to the Genius Bar at my nearest Apple Store? Might I try to erase the hard drive as a fix? I hate to do this, only as a last resort, as it is so time-consuming. Should I just update my Mac OS? Please advise, out there, if anyone can offer any advice, I would be greatly appreciative.

The list of issues you posted probably would not get shorter if you attempt to 'upgrade them' away, as usually that kind of effort is not effective yet may expose more of the same problems while not necessarily revealing the original weakness. Another OS X installed over a set of problems seldom helps.
How full is the hard disk drive? If it is too full, or has been very busy in use several years, it may be time to replace the HDD and perhaps put a larger capacity one in the computer. And if the main computer hardware checks out OK (tested under a variety of duration and stress tests) then also consider a RAM upgrade if the device is not already at the maximum capacity.
When was the last time the hard disk drive was devoid of content, maybe wiped -- erased and reformatted by a third party disk utility or have a utility overwrite the entire HDD with zeros? This used to be a common tech service in the course of a major effort to restore a Mac. Or Defragment?
If you can do the latter, this could help resolve bad sectors and remove old data or corruption on the hard drive. Or get a new HDD and before committing a new OS X install & apps to it (or a re-clone of a complete backup) test the drive and be sure it is ready for use. Not all new drives are perfectly ready; some need to get exercise first.
I'd bet on a new hard disk drive of larger capacity (also note spin RPM rate and data speeds) and a full RAM upgrade.
If you have a backup clone on an external hard disk drive (in a boot-capable enclosure) you could really go to town and before you erase the main/only hard drive, make a backup clone and test its ability to boot the Mac. Or put the old drive and content in a suitable boot capable enclosure of the kind with its own power supply, and deal with it later.
Then consider a later version OS X -- whatever most recent version that model can support... {edited}
Good luck & happy computing!

Internal hard drive fails to mount in Disk Utility.

My internal hard drive fails to mount in Disk Utility for the past year, so I cannot verify it. However, it does mount in Disk Warrior. (1) I am concerned that it will not mount within the Apple software, and what that bodes for my computer. (2) I also have MANY spinning beach balls daily and have to use the power button to reboot. I just bought extra Crucial RAM and have yet to install it. Somehow, I don't think it wil help my issue # 1 though. Please advise, anyone out there! Thank you.

No, there are never any errors like that. Also, I have upgraded the Mac OS from 10.5 to 10.6.8. That did nothing. I backed up my Users = Christina folders to a good, 15 year old Firewire 800 La Cie 1 TB external hard drive. I also tested using the Apple Hardware test, which showed no problems, and Alsoft's Disk Warrior and defragged, and fixed a very minor issure re directory count, probably resulting from many improper shutdowns lately due to frozen spinning beach balls. None of these procedures alleviated the issues, and I still have the same issues: mainly that super-frequent spinning beach ball. Do you think I ought to install that new RAM sitting here finally? Perhaps it is a lack of RAM??I only have 2 lousy GB's of RAM after all! Thank you so very much for a reply.
Message was edited by: Flamingcreatures

HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

Internal Hard Drive for my macbook

Hi !
I'd like to know where can I buy an internal hard drive for my Macbook, and if there is a seize limit.
I bought the MB on the 05th Nov. 2007 : MB 13" white ; 2.2GHz Intel Core 2 Duo, 2x1Go (667MHz DDR2 SDRAM) [right now] the hard drive is 160Go [FUJITSU MHY2160BH]
I'd like to know where I can buy it (in France if it's possible or on internet)
and if it's possible to get a 500Go
Moreover 7200t/m is better than a 5400t/m but does it use more ? is it noisly ?
I guess that with the on I have right now there is something which protect the hard drive in case of shocks.
Thanks !
M@cmuft

There is no capacity limit on the MacBook but I believe you will need a drive of maximum 12.5mm deep, to be certain I'd try to get a 9.5mm drive. 7,200 rpm drives are usually a little noisier and will use slightly more battery power when running. The "sudden motion sensor" is built in to the computer, not the drive - do be careful when buying your new drive as drives with built in drop protection can cause issue with the SMS in the computer. You can disable the SMS if need, just Google for instructions.

What is a recommended internal hard drive for a Mac Pro 1,1 (2006)?

What is a recommended internal hard drive for a Mac Pro 1,1 (2006) model? I would like to
add more hard drive space by utilizing the three available slots. However, from my understanding,
Apple does not produce hard drives for my older computer so I'll need to turn to a third party.

You are very much over-due for some new larger more efficient drives.
the most common best approach goes something like this....
SSD 120GB for system
WD Black 1-2TB for data (and put all your data and media files, all your home account sub-folders)
Backup. I use WD Green but use what you want. I have a small boot volume, TimeMachine, and 3rd that is a clone image of the boot drive volume.
Very fond of WD 10K VelociRaptor drives. Not much louder now than the WD Black 2TB, $100-200 for 250GB to 1TB.
You can use any size SATA 3.5" drive, most now are 1TB and up to 4TB.
You should have always bought Amazon or Newegg or outside of Apple, Apple can often charge 3x what those places charge.
Probably want to add or replace FBDIMMs you have, these are excellent and price in the last year has fallen.
2x2GB FBDIMM DDR2 667MHz @ $29
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
WD Black 1TB $93
http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B0036Q7MV0/
WD Green 3TB $149 - backup
http://www.amazon.com/Western-Digital-Caviar-Green-Desktop/dp/B004RORMF6/
WD VR 10K 250GB $103 200MB/sec boot drive :
http://www.amazon.com/gp/product/B007V5A1BK/
Those last and last and make a nice boot drive.
SSD: Samsung 840 128GB
http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
Over-due to upgrade and replace the graphic card most likely it sounds like also:
ATI Radeon 5770
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
Your OEM 7300GT isn't helping now and with Lion or the X1900 dust magnet and out of date too. If you have a functional 8800GT still working you are lucky and no need.

How do i format an external hard drive for use on both windows and mac book air?

how do i format an external hard drive for use on both windows pc and mac book air?

Use exFAT on the PC.
(71374)

How to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?

Hello,
I wonder if you can please help me out.
I wonder, is it possible to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?
Thanks,

There's only one 9.5mm high 1tb drive around http://eshop.macsales.com/item/Samsung/HNM101MBB/
With a video on replacing the hard drive http://eshop.macsales.com/installvideos/macbook_13_mem_hd/

2009 MBP can't see internal hard drive - for the second time!

Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
Thanks for any feedback!

Hi
I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
broadband.vodafone.ie/download/files/storage_mac.pdf
Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
Cheers
Topes

FORMAT HARD DRIVE FOR USE ON MAC AND WINDOWS

I'm going to start working on scanning a lot of old family photos and getting them put on an external hard drive for my parents. I'd also like to eventually put old VHS family home movies on the hard drive as well. However, I'm not sure what to do about the hard drive. I know if I format it to be compatible with my Mac it probably won't be compatible with their PC. I read about the FAT32 option but I saw something about a file not working if it's over 4 GB in size. I'm thinking maybe some of those home movies will be larger than 4GB. I also saw an exFAT option. If I go with that will I be able to scan the photos on my Mac, get the home videos converted and put it all on the hard drive will all of it be visible and usable on their Windows PC?
Thanks for your help!

matahari_1946,
if you’re not yet backing up your Mac’s internal hard disk, I’d recommend first that you purchase an external hard drive for yourself for exclusive use as a Time Machine backup destination; that way, in case of a disk problem, you won’t permanently lose all of your scanned photos and imported movies.
A 4 GB file limit does apply to FAT32 filesystems. If their version of Windows allows, the external disk which will hold those photos and videos should be formatted as NTFS from their PC, so that they can watch video files over 4 GB. (It’s unlikely that an individual photo file would be over 4 GB.) However, OS X doesn’t come out of the box with NTFS support. The exFAT filesystem is able to hold files over 4 GB, and it is supported by Mac OS X 10.6.5 and newer, but it’s optimized for flash drives; it’s more “fragile” on hard disks than other filesystems are. As a workaround, you could format a flash drive to have exFAT, copy videos over 4 GB onto the flash drive, and then use your parents’ PC to copy the videos from the flash drive to their NTFS external disk. Other alternatives would be to look for third-party software for OS X which supports reading from and writing to NTFS disks, or third-party software for Windows which supports reading from and writing to journaled HFS+ (the default OS X filesystem) disks.

Internal hard drives won't appear in Disk Util

I have a bizarre problem with my hard drives now. I'm on a 2.4GHz Core2Duo Macbook Pro 15" with 10.5.4. I've switched the hard drive a couple of times before with no issues whatsoever. Now, with the exception of the brand new one that won't hold an install, my internal hard drives don't show up in the install disk's Disk Utility.
I got a new hard drive to try the other day, installed it, booted to my OSX install disk to use Disk Utility. I switched the new disk to GUID and formatted it as journaled like usual. It took 4 hours to do the install, then after the restart it tanked. It booted back to the install disk where I checked it out. It could not repair the file system, and the drive was not "mounted". I mounted it, repartitioned and formatted it, and installed again. This time it stopped halfway through the installation and said the drive might be corrupt.
I unplugged the cable and battery, held the power button for over 5 secs, then just let it sit for about 10minutes with no power source while I thought about this. I put the original drive back in, booted into OSX, and put the new hard drive in an external USB enclosure. I formatted it while in OSX, then rebooted into the install disk and installed OSX on it while it was in the USB case. It took the installation more quickly (about an hour and a half...still not 20min like my old 7200rpm Hitachi 200g), then I booted into its OSX while in the USB drive. It booted ok, so I downloaded the updates and clicked to install them. It then went into a revolving restart. Eventually I decided it was not doing this because it was happy so I shut it off.
I swapped the hard drive out with another new one, and this one would not complete an installation while inside the computer either. It acted similarly while in the USB case. HOWEVER it would always show up as unmounted after a restart and would not recognize the drive inside the computer as a bootable disk.
I put my original drive in there to give up, and it gave me the ? folder. I booted to the install disk and it did not show up in the disk utility. I put my old hard drive in the USB case, booted to the install disk, and it showed that it was there, but unmounted and it could not repair the file system.
I repartitioned my hard drive (i have time machine working..not a huge setback) in the USB case and put it back in the computer. It still would not show up in disk utility. I put it back in the USB case, installed OSX onto it (in about 20min), restarted a couple times, saw that it was working, put it into my computer, and got the ? folder again.
I went out and bought a stardard 160GB SATA 5400rpm Seagate drive to try in there, and this fresh drive is not recognized inside the computer either when I boot into disk utility.
The brand new hard drive WILL show up in Disk Utility when I boot to it from the install disk, but it will not survive a complete installation.
So now I'm running OSX from my original hard drive in a USB case until I can figure out why the old disk recognized inside my laptop is the new hard drive upgrade, but it cannot complete an installation on it.
I'm originally a Windows slave, so I can only think in terms of AHCI or SATA-card drivers, or screwed up bios. But this is all pre-os-boot, and the apple firmware seems to be pretty automatic in picking the right settings to see stuff.

I kind of feel like drawing a flowchart to show all that I've tried. Its difficult to keep everything intelligible while listing the entire last week's efforts at 2:45am. :-/
http://www.ocztechnologyforum.com/forum/showthread.php?t=41951
I also explained it here, perhaps a bit differently. Maybe some reply there might spark someone's memory of a possible problem. I understand the nature of computers (been 100% geek for 20 years), but I'm hoping there's someone out there with the specific Apple expertise to help me out. Eventually the processes I've taken and my specific situation will become clearer as the questions widdle away at this.
My original 7200rpm SATA drive that works fine won't show up when connected to the SATA cable. I've repartitioned it with HFS, and repartitioned it as free space in the USB enclosure. It simply won't show up in Disk Util. Same with the brand new test SATA drive.
The new SSD SATAII does show up, but after a 4hr install the partition is unmounted and won't show up as a boot option. I can boot to the install disk and repartition it, reinstall, or remount it. But it will never be mounted to be booted from while connected to the computer. I've had 2 of the SSD's to try, one survived one restart, then went into a never-ending restart cycle after I installed the updates. The 2nd has never successfully been mounted after the install to boot from. Now nothing can be mounted to boot from within the computer. I have to boot off of any of these drives from the USB enclosure.
If I install OSX on them while in the USB enclosure, that works, but they will not mount when connected to the SATA cable inside the lappy. The platter style SATA drives won't even be recognized...
Thanks for the instant reply, this is driving me nuts 'cuz it makes almost no sense. Thanks so much to everyone that contributes. I appreciate everything.

Quiet external hard drive for use with Time Machine?

Few questions related to Time Machine:
1- what external hard drive that would be good to use with Time Machine, that also runs relatively quietly? Since TM runs 24/7, am looking for one that is quieter than my current G-tech.
2- Please confirm what size is optimal relative to the size of the internal hard drive.
3- I currently use a separate external hard drive as my bootable disc. Is it possible/preferable to have these be on one and the same drive?
Thank you.

1. I like these (have three of them) - literally whisper quiet:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
2. You should allow 2 - 3 times your internal drive's size for TM.
3. No, it'd be best to be on another drive - you can create separate partitions, but if/when the drive fails, both of your backups would be gone. So, keep your clone on a separate disk. In fact, it's good to have two different backups.

Best hard drive for use with Time Machine

Hi,
Has anyone determined what the best external hard drive is for use with Time Machine? Is there a particular one that works exceptionally well with Time Machine, or is it much of a muchness?
I'm looking for a Firewire 400 & Firewire 800 drive that STAYS ON all the time, and doesn't automatically spin down or spin up like the rubbish WD My Book drives do.

I can't tell you if it is the "best" hard drive for you to use with TM, but I'm quite happy with the 500 GB Buffalo Technology DriveStation Combo TurboUSB I bought recently. It is quiet, quite inexpensive for the capacity (I paid about $120 for one on sale at Fry's), & completely compatible with OS X & TM.
Best of all for me, it automatically powers down when my iMac sleeps. It also spins down after a time if the Mac's Energy Saver preference "Put hard disk(s) to sleep when possible" is checked; otherwise it remains spun up until the Mac is put to sleep or switched off.
It comes with "Turbo" USB & Memeo "AutoBackup" software, neither of which I installed. (The box didn't claim these extras came in a Mac version but both Mac & Windows versions were included on the CD.) Out-of-the-box, I reformatted the drive with the Apple Partition Map scheme & two partitions, a 160 GB one for cloning my internal drive & the rest for TM. The drive works perfectly for both uses & seems quite fast, as one would expect from a 7200 rpm SATA drive.

PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

Good afternoon.
I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend. I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it. It came with the stock 500 gb 5400 rpm internal hard drive. At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds. I am going to buy 16 gb of RAM from Other World Computing to install.
I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014 It's on sale for $94.
But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
Here are my questions about replacing the hard drive:
1. Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
2. Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
3. Is there any additional driver or special software that I have to install for a hybrid solid state drive?
4. Currently there is no personal data stored on the computer. Can I just put the new hard drive in, and then insert the snow leopard install cd?
5. If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
6. If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much. I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
I would really appreciate any help and advice. I've never switched out a hard drive before.
PLEASE HELP !!! Thanks!
Here is the "About this Mac" Info:
Macbook Pro 15-in Mid 2012
Model Identifier: MacBookPro9,1
Processor: 2.3 GHz Intel Core i7
Memory: 4 GB 1600 MHz DDR3
Software: OS x 10.8.5
Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

1. Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled). This is standard with OS X.
2. Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
There are arguments pro and con. Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives. If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time. But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity. The jury is still out on this debate.
3. Is there any additional driver or special software that I have to install for a hybrid solid state drive?
No
4. Currently there is no personal data stored on the computer. Can I just put the new hard drive in, and then insert the snow leopard install cd?
You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it. Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
5. If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
Not via Snow Leopard on this MBP. See my response to #4.
6. If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
No. They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

Internal hard drive for use as scratch disk

Similar Messages

Maybe you are looking for