Internal hard drive power connector?

Just picked up a Maxtor 500 Gig SATA and the power connector that came with the drive is a four-pin? Please help if I am missing something... my G5 has a data and power connector at the bottom of the lower drive bay, but the power connector looks like a 15-pin similar to that on the drive itself. Do I need an adapter? I keep reading posts about how obvious the installation is but I am totally vexed! Is that my G5 is a first generation the problem?
Thanks

Thank you for the reply. However, my problem remains.
The power and data fit into the drive, and the data cable correctly fits into the G5 data interface, but the power connector supplied with the drive has a female 15 pin connector for the drive and a male 4 pin to the G5. But my G5 seems to have a 15 pin female connector for power. Also contradictory to everything I have read, the power connector from the G5 is not hidden underneath the drive bay, it is right in front of it. I am not an idiot, but I feel like one
Please let me know if I am missing something or if I have the wrong power connector...

Similar Messages

  • SATA power connector to internal hard drive

    I just installed a Firmtek Seritek 1eVE2+2 PCI card in my Quicksilver in order to install a 1TB SATA internal hard drive. The drive is a WD 1001FALS Caviar. The problem: The hard drive only accepts an SATA power connector and my Quicksilver only has ATA 4pin Molex power connectors. Did I get the wrong hard drive? Are there adaptors? Are there SATA connectors hidden in my Quicksilver? I've looked but have not seen anyone else with this problem. Please advise. Thanks.

    Hi-
    Don't worry.
    All you need is a 4 pin Molex to 15 pin SATA adapter, available at any PC parts store or online vendor.
    http://www.mcpb.com/html/sta.cbl06.pr.html
    If you get one with a 270º angle, it fits nicer when the door is closed.
    http://www.mcpb.com/html/sta.cbl08r.270.html
    I've looked but have not seen anyone else with this problem.
    http://discussions.apple.com/thread.jspa?threadID=1537619&tstart=5

  • I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

    Hi, likely the easiest is to just poll the drive & get something like this...
    Get MacScan...
    http://www.apple.com/downloads/macosx/networking_security/macscan.html
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
    But if you have a good external drive already, just clone it.
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/

  • How to clean the connectors on internal hard drive for oil?

    Hi
    I've a 2008 Mac Pro 3.0GHz with 4 internal hard drives...while putting in the newest internal 1 TB hard drive, the guy who did this pointed to the brass/copper connector bit on the hard drive, the part that slots into the motherboard connector in a Mac Pro, and he was touching, briefly, the connector with his finger...should I pull that hard drive back out and try to clean off the connector because of oil? Also the connector part (seat) inside the Mac where the HD slots into? How and with what?
    Thanks
    K

    Cleaning those things would require tools so delicate probably only a computer could manage it right. Don't worry about it, or take care of it right away by getting a new drive. I've pulled hard drives out of their socket only to have one of the pins permanently bend out of shape, and become unreadable. I've also had one that was repaired by a person with a soldering iron. I dare not remove it from its case after that event!

  • Power Mac G4 - 933 - maxium size of second internal hard drive

    I have a Power Mac G4 933 Mhz with an existing 60 Gb internal hard drive. I am trying to determine definitively the largest sized internal hard drive I can add in addition to my existing 60 Gb drive.
    There are a variety of articles saying 120 Gb is the max, I called Apple Support and they said 80Gb and some places say it can support well beyond 200 Gb.
    Any guidance is appreciated.
    Thanks.

    Just to verify my previous post, I am running a Seagate 250GB IDE drive on the internal bus in a 1GHz DP QS with the 4.3.3f2 Firmware and have had zero issues with this set-up.
    The drive shows the full 250GB capacity (actually 232.89GB after its formatted).
    Its possible that only the 2002 QS (800, 933, 1.0DP) have this ability, as I have not read about any of the ealier QS machines (733, 867, and 800DP) capable of doing this. I believe the 933 QS is ok, so if your firmware reads right, your probably be in luck.
    freddythefreeloader, please let us know if you have any success with this. Thanks.
    G4 MDD 1.25GHz DP FW800-ATI 9800 128MB-2GB RAM   Mac OS X (10.3.9)   G4 Gigabit Ethernet 1.5GHz OWC-ATI 9000 OEM 64MB-1.5GB RAM-Pioneer DVR111D

  • Powermac Dual 867 MHz Power PC and internal hard drive

    I was just sold a Samsung sp2514n internal hard drive- 250GB 7200RPM 8MB Cache.
    The problem is that after I installed it- my computer would not boot up. All I got is a folder with a question mark.
    When I took it out- it booted up normally.
    Before I upgraded, I was told that it would work in my computer?
    Is there something I'm not doing- that needs to be done- or is it incompatible with my computer?
    Thanks,
    Mike DiGiorgio
    Dual 867 mhz power PC G4   Mac OS X (10.3.9)  

    See the drive jumper settings here:
    click here
    You do not want CD. That's limiting the capacity to less than 32GB.
    Message was edited by: Host

  • Installing internal hard drive on an old iMac

    I am an absolute novice when it comes to taking apart a computer and know nothing about any technical terms or parts. I was able to install a new battery when the original died, so when the "genius" at the Apple Store said I could install an additional internal hard drive, I gave it a whirl. Before I try to return the hard drive, I thought I would give this a shot.
    My iMac is a 400 MHz PowerPC G3, one of the early generations, if the not the first (see-through cobalt blue exterier). I am running with 256 MB of memory and the CPU type is PowerPC 750 (83.0). I have Mac OS X Tiger, version 10.4.6 and this machine had been working great until we recently purchased our first iPod. Now with all the music being loaded in iTunes, the iMac has slowed down and even frozen when trying to use a few applications at once.
    I figured I needed more hard drive space and/or memory and the people at the Apple store suggested I purchase a Seagate 80 GB Barracuda and install it myself.
    Well, I got the computer apart and found the old hard drive, but that is about as far as I can go. I read about making the new hard drive the "slave" hooking up the BLUE, BLACK and GRAY connectors on the new cable, but I don't know a motherboard from a jumpdrive and the new connectors do not match up with the old one (the Blue connector is not the same size as the old one that I think was going into the motherboard). There is also something about an unused power cable in the old computer for the new hard drive, (which I did not see) and a suggestion that I get a Y-shaped power cable from an electronics store, which even if I knew what it was, I would not know where to begin connecting it. Not only does the new connector not match up, it is about 10 times as long as the old one, which leads me to the final issue: if I could get this all hooked up and power-supplied, where in the world would I put the new, additional hard drive? There is no room I can see adjacent to the current hard drive. Do I have to take the thing further apart?
    I realize this may provide a great laugh for anyone who knows how all this works. If trying to walk someone through this process using Apple Discussions does not make sense, I completely understand. I had nothing to lose (except possibly the cost of the Seagate drive if they won't take it back).
    I was able to put everything back together after taking the old hard drive out, so I think I could do this if the parts were all there and matched up....but I would still need to know where to put the new drive!
    Any suggestions are appreciated. I have already resigned myself to the fact I may just need a more expensive external drive...I just have few available ports.
    Thanks,
    Conrad Farner

    "...when the "genius" at the Apple Store said I could install an additional internal hard drive, I gave it a whirl... if I could get this all hooked up and power-supplied, where in the world would I put the new, additional hard drive?"
    Your iMac has room for one hard drive and the optical drive (CD-ROM, DVD-ROM, CD-RW, etc.). Any ribbon cable supplied with the hard drive or a Y-splitter power cable is of no use in the iMac. The new drive must replace the original, because the two can't coexist internally. Additionally, you need to configure the new Seagate as "master," since the optical drive is "slave." Refer to Seagate's accompanying documentation, for instructions on setting the small jumper(s) to designate the drive as "master." The drive may have been factory-configured for "cable select," which isn't supported in your iMac. After you get that straightened out, you'll need to boot the computer from the Tiger installer CD and use "Disk Utility" to format the new drive as a Mac OS Extended (HFS+) volume. You may also want to partition it as well.
    Incidentally, you should post any future questions about your iMac in the Forum dedicated to the CRT-style iMacs. You'll receive informative answers to any questions that you might have, from those who are thoroughly familiar with your model iMac.

  • Swapping circuit boards for an internal hard drive

    My story may be a bit long and roundabout, so please try and bear with me as I explain.
    My PowerMac G5 is 4.5 years old and over the past few months, the DVD and my secondary internal hard drive, both the originals that came with my computer, have been slowly dying. I finally replaced the DVD drive the other day and was little by little copying the data off my secondary internal drive before it completely failed. One thing that seemed to help the internal drive run more smooth was unplugging the power cable and plugging it back in. A worker at an Apple store's Genius Bar also suggested swapping each internal drive to the bay that the other was originally in, to see if that helped at all.
    Anyways, in the end, the drive was giving me so much trouble and I had unplugged/plugged the power cable so many times that eventually the part of the circuit board that holds the pin connectors straight broke off, so now I had no way to get my data off the slowly failing drive. Another visit to the Genius Bar and I was told that the drive was as good as done, but not wanting to believe that the majority of my film projects were gone forever, I contacted a store across the street from my old NYU dorm called Digital Society. They told me that the circuit board on the drive needed to be replaced and that the new board had to be taken from an identical drive. I soon realized that the primary/system drive of my G5 was in fact identical. So, after running Time Machine, purchasing new primary and secondary internal drives, re-installing the OS and doing a Time Machine restore - which was flawless - I took my two drives back to Digital Society where they swapped the circuit boards rather quickly.
    Now that I'm back home, I was easily able to recover all my data from my failing drive... only after having its circuit board replaced, the drive is showing no signs whatsoever of the read/write difficulties and failures that it had been showing prior to the circuit board swap, which leads me to a few questions
    a) Was it really the drive that had a problem, or the circuit board itself? Is there anywhere I could buy just a circuit board without having to buy a new drive just to get a circuit board? The drives in question are 400 gig Hitachi Deskstar, model #HDS724040KLSA80. While I'm not entirely sure the once failing drive should be trusted again, my old system drive - which now has a busted circuit board on it - still works perfectly fine.
    b) If I'm able to get a new circuit board, how easy is it to replace myself? The guy at Digital Society did it very quickly and for a price of $120. Are there any video tutorials?
    Thanks!

    Lot's of good question Will,
    Hard drives are not what they used to be, if your work is important I'd replace them every 3 years & have 2 backups in the meantime.
    I doubt you can get the circuit boards separate without buying a while questionable drive.
    If I'm able to get a new circuit board, how easy is it to replace myself? The guy at Digital Society did it very quickly and for a price of $120.
    1 TB 3 year warranty $99...
    http://eshop.macsales.com/item/Samsung/HD103SJ/
    1 TB 7 year warranty...
    http://eshop.macsales.com/item/Samsung/HE103UJ/
    More cheaper drives...
    http://eshop.macsales.com/shop/hard-drives/3.5-SerialATA/WesternDigitalCaviar

  • G5 tower now boots, but one of the internal hard drives won't mount!

    For those of you who saw my previous thread, my G5 tower would turn on and play the startup chime, then sit there until the fans ramped up. It seems that the problem was the Belkin PCI card. I removed it, and the machine started up with no problems.
    Now, however, one of my internal hard drives (not the primary one) won't mount. Various programs can't even tell it's there. I'm completely lost as to how to solve this problem. My first thought was to try to swap it into an external case to see if it would mount that way. Thoughts?

    One, possible two posts should read ground. Test for continuity against the metal case. Another should read 5V+DC. I think the four prong are: ground, ground, illumination then power. The connectors are gold plated and should not corrode, however, they are no match against fine particles of dust. You can carefully unplug both sides of the drive connections and vacuum. Usually, to unplug and re-plug is enough to get it to work again. When there no power coming off the logic board, you can find a Y-splitter and power off the other drive.

  • Will not recognize internal hard drive

    I have a strange problem with a 2009 MacBookPro.  It started acting "strange" for the user over the past few months.  By "strange" I mean it would freeze, or fail to boot, or sometimes even restart without any reason.  Now, it gets even stranger.  Tried the standard things,  RAM reseat, replace, check for loose connectors etc.  It would fail to boot when the hard drive was connected internally.  Then it would give a kernal panic and fail to even recognize a hard drive as being installed.  Did a PRam reset, SMC reset and even the power off/control key to try to reset the open firmware.  No sucess with anything.  This is a suystem with an internal battery.
    Yet, when using this exact same hard drive on an external USB drive connection, it would boot fine.  Next tried it in Terminal mode to boot up another MBP.  Failed to boot.  When the 2nd MBP was booted from its internal drive and the suspect machine was plugged in as a Firewire (Terminal mode on "strange" computer) an External Firewire Drive appeared on the desktop, then a few seconds later, an identical copy of the first Ext FW drive appeared.  This went on with evenbtually six copies of the one single Terminal booted hard drive appearing on the desktop of the second computer.  None of the six drives would open or even allow any indiccation of what they contained.
    Tried to partition the hard drive when it was put back into the internal slot but it would not unmount and failed to partition.  The same thinmg happened when trying to erase it.  Connected the hard drive via USB to a Windows 7 machine and used it to erase both the Recovery and Main partitions from the ard drive.  Both were erased but the EFI partition could not be erased or cleaned.  Put this same hard drive, as an external USB, into a very old XP machine and there the EFI partition was removed when a "Clean" command was sent via command line.
    I then took the, now totally erased hard drive, and put it back into the computer as an internal drive and booted the computer from a 10.8 USB stick so I could partition the now empty hard drive.  The drive was not even recognized as being present.  Did the same thing, but using the USB external connection for that same hard drive.  It partitioned and then formatted with 10.8.1 (what was on the USB stick).  After the OS was installed, the computer would boot using this newly created OS when connected as an external USB drive.  Put the drive back in as the internal drive.  Got a Kernal Panic.  Forced shutdown and retried.  Noi kernal Panic but drive was not even recognized.  Pulled the drive from internal and put it back into the external USB and tried booting.  System would not recognize the drive as even being present.
    I then erased and cleaned the drive in the XP machine again and then, using the USB connection on the second computer reinstalled 10.8 from the USB.  When I tried the now newly created software again, the same thing happened as listed above. 2nd machine booted fine on the drive as a USB, "Strange" machine booted fine using the drive as an external USB, Kernal Panicked then would not be recognized in the "Strange" machine.
    It appears that when the drive is connected internally. it not only does not have the OS software recognized but will rewrite something in the drive that makes it impossible to be recognized by any Apple.  My first thought was that the EFI partition was corrupted somehow so that was why I tried cleaning the EFI partition along with the other two partitions.  But even with a new EFI and other partitions, the drive was not useable once it was used to try to boot as an internal drive in the suspect computer.
    Now here I am dropping into speculation mode.  My guess is that something in the very basic ROM (Pram?) that recognizes a hard drive is in the internal slot and tries to get to the EFI instead fails and in the process it screws up the EFI (or maybe even an address table?) in the hard drive.  If it recognizes that there is no internal hard drive, it will happily boot from either a USB stick, a USB connected external hard drive or a Firewire/Terminal mode computer connected to it.
    Sounds like a motherboard problem but I am wondering if it is possible to "flash" the very basic ROM that is at the start of the process back to factory default or maybe just replace the chip if it is the same one used as part of the Firmware password protection system.
    Anyone have any other ideas or thoughts about possible solutions or at least a way to definitely identify what the problem's cause?

    Answer has been found.  The internal drive SATA cable was replaced and the system is now working correctly.

  • Internal Hard Drives Disappeared, Finder Memory Problem

    Hello Helpful Folks,
    I recently installed an addional internal Hard Drive, and an additional 1GB SDRAM. This worked great for a day, but the next morning, after powering up, system was extremely sluggish, and after much deadline-induced impatient problem solving, has gone from bad to worse (system refuses to acknowledge existence of internal Hard Drives). I apologize in advance for the length of this post, but as
    the devil is in the details, I figure too much info is better than not enough.
    Following is a breakdown of my system: AS IT LAST WORKED; RECENT UPGRADES; and MY LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE. Please don't interpret my all caps as shouting, just trying to organize this post for better clarity.
    System is dedicated to Video Editing with FCP 3, running under OS 9.2.2. System is "off the Grid", i.e. no network, no internet, no printer, no gaming devices. System was purchased new in July 2001, by a friend. At one point I know this system had an Airport card, which was removed prior to my purchase in 2003. I can't remember what else it may have had installed in its history, but here's what it has now:
    SYSTEM AS IT LAST WORKED:
    **bold items are upgrades Original Owner or I installed with no apparent problems**
    Power Mac G4 "Quicksilver" 2001
    867 PowerPC G4, 256 L2, 2MB L3
    -1 Stick "ValueRAM - KVR 133 x 64 C3/512" in PC 133 DIMM slot **
    - "Virtual Memory" was turned off years ago due to conflict with FCP 3
    -2 empty DIMM slots
    -1 60 GB internal HD (Maxtor Ultra ATA/100), 1 partition, formatted HFS+, jumpered as "Master" on Internal ATA 2 ID=0 (which as I understand it is ATA/66 speed)
    -1 Pioneer "Superdrive" DVD-R/W/CD-R/W on Internal ATA 0 ID=0
    -NVIDIA GeForce2 MX with 32MB SDRAM in AGP Slot, feeding a 17" Apple Studio Display.
    -PCI Display Card "formacGA7" - not attached to any external device, not sure what its intended purpose is.**
    -3 Empty PCI Slots
    -OEM Keyboard attached to Monitor's rear USB port.
    -Microsoft 3 Button Wheel mouse with "IntelliEye" (wheel is 3rd Button) connected to Keyboard USB port (right side).**
    -2 OEM FireWire (400) ports
    -2 OEM USB (1) ports
    Peripherals that have worked in various configurations with this system over the past 3 years:
    -3 OWC Mercury Elite ("Oxford Chipset") Externally powered, External FireWire(400) 200GB Hard Drives, 1 partition each, formatted HFS+, daisy-chained to either of the FireWire ports.
    -1 Canon GL1 MiniDV camera, attached either to the other FireWire port, or to the last drive in the chain, depending on my urgency/laziness factor. BTW, FCP 3 has worked flawlessly controlling this Cam for logging and Batch Capturing.
    Applications on System Hard Drive that I have OEM CDs for:
    -OS 9.2 - (I think I remember that OS X was removed from system due to conflicts shortly after original purchase)
    -FCP 3
    -DiskWarrior (version unknown, purchased from Alsoft in 2003)
    -OWC Intech Hard Disk SpeedTools ver 3.5
    Other CDs I have:
    OEM CDs for Power Mac G4:
    -Software Install, OS 9.2, CD vers 1
    -Software Install, OS 10.0.4, CD vers 1
    -Software Restore, OS 9.2 & 10.0.4 CDs vers 1, Discs 1-4 of 4.
    -OEM Apple Hardware Test; Power Mac G4, SW vers 1.2.1
    Applications on system Hard Drive that I don't have CDs for, that I rarely use, but I'd like to keep:
    -After Effects 5.0
    -QuickTime Player 6.0.2
    -Toast Audio Extractor 1.1
    -Toast Titanium 5.0.2
    Applications on system Hard Drive I use if my wife is busy on our Windows XP machine:
    -Photshop 6.0
    -Microsoft Word & Excel
    # of other Applications on System Hard Drive I either don't use or may be integral to the system: 260
    # of Control Panels:
    -Enabled: 34
    -Disabled: 0
    # of Extensions:
    -Enabled: 174
    -Disabled: 0
    note: a number of the applications and extensions are for AOL, Quickbooks, Microsoft Money and the like, as well as other things I don't use (Airport, USB printers, Networking, etc.)
    Smart things I did:
    -Regularly made backup copies of my FCP projects to the external drives.
    -Bought a copy of MacDrive so I can see what's on my External Drives on the XP machine.
    -Printed out System Profile before I installed upgrades.
    -Thoroughly searched this discussion board for and gathered as much info as I could before upgrading.
    Dumb things I did:
    -Made a copy, but not a clone, of my System Folder to one of the external drives when I first got it.
    -Didn't keep any sort of separate log of what's on the External Drives.
    -Never ran any sort of Disk Maintenance, even after one of the Externals crashed (DiskWarrior saved my butt on that).
    -Ignored some of the advice on this discussion board.
    Really dumb thing I did without even realizing it:
    Captured all media for a rush job onto my internal system Hard Drive, as well as storing and using massive jpgs for the same job on that same drive...
    Which led to painfully slow rendering times, and crashes caused by "Error: Out of Memory", which I interpreted as "Must buy more memory" and not "must make sure I'm not trying to edit media stored on system drive, especially with massive jpgs that I should reduce"
    RECENT UPGRADES:
    Here's what I did, and how I did it:
    Turned off system, disconnected all External FireWire Devices, disconnected Monitor, opened case, touched various metal parts of case and power supply to discharge any Static, unplugged power cable.
    -Installed 2 512MB sticks of "Lifetime" PC 133 SDRAM; total System RAM is now 1.5GB, all 3 DIMM slots now occupied.
    -Installed 1 Maxtor "DiamondMax" Ultra ATA/133 100GB Hard Drive (8 MB buffer) as "Slave" (no jumper) in top of U-Carrier above System Hard Drive; attached to middle of original Apple ribbon cable, attached available power plug.
    Taped spare jumper to inside of empty drive bay, noting origin and date. Did NOT push PMU button. Carefully closed case. Reconnected Monitor, did NOT reconnect any FireWire devices. Powered System on, but did NOT perform PRAM reset.
    I don't remember the exact order of what happened next, but I think: System booted up normally, a window popped up saying a new drive had been found, would I like to intitialize it?, which I did as Mac OS extended, and then named. If I was instructed to restart, I did so, otherwise did not. Clicked on "about this Mac" and saw that it now showed 1.5GB RAM. I then went about moving Media/Render files off the System drive (and one of the Externals) onto the Internal Drive, with a combination of FCP's Media Manager, and dragging from the Finder. After files had copied, dragged Media/Render files from System Drive to Trash. Opened FCP project, had FCP re-link to new locations of missing files. Saved, closed, and re-opened project, set Capture/Scratch disc to new internal Drive. At some point I changed FCP's Memory Allocation from whatever it was to 512000KB Minimum, and 900000KB Prefered (and I hope I got all those zeroes right). Did NOT restart after changing Memory Allocation, unless a window popped up instructing me to do so, in which case I did. Re-opened my project, rendered a few thing at a noticeably increased speed, saved everything, emptied the Trash, shut everything down, and called it a night as it was 4:30 am.
    A few hours later, I plugged the MiniDV and an External Drive into the FW ports and powered up the System. It was behaving extremely sluggishly. I would click on something, the pointer would turn into a wristwatch (sometimes with the minute-hand moving, sometimes not) and like an actual minute later, what I'd clicked on would open. All three drives were on the desktop, still had their files, and "About this Mac" still showed 1.5GB total Memory. So I powered down, disconnected the FW devices, waited a bit, and powered back up. Same sluggish response. I tried to open my FCP project file, and instead got a Window that said something to the effect of "The Application associated with this document could not be found". I think I tried to open FCP from the Applications folder on the System Drive and got the same message (I'd only had 3 hours sleep, no coffee, my client had died, and his family was coming for whatever I had in a few hours).
    LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE
    Panic had set in, which never solves anything, so I don't remember what order I performed which tasks, between searching for clues in this forum, and convincing myself that that would be faster than trying to compose a question, waiting for a response, etc.
    The first two things I did, and I can't remember which I did first (both from Keyboard Commands during Restart):
    Rebuild Desktop
    PRAM Reset
    Neither of those solved the problem, so I continued.
    I tried restarting without extensions.
    I would get errors that said something like "Not Enough Memory to Open Finder".
    I tried booting from Disc 1 of the Software Restore Disk, which only wanted to destroy my data.
    I tried booting from the OS 10 disk, with the same result.
    I was finally able to boot from the OS 9.2 Software Install Disk, and actually saw both internal drives on the desktop, and the 1.5GB RAM in About this Mac. I tried to allocate more memory to Finder, but was informed that "Cannot Perform Requested Operation. This operation requires versions above 8.0".
    I think at this point I decided that I must have too many extensions, and started disabling ones I thought irrelevent to my cause (mostly anything that said "AOL", "Airport", "Ethernet", "Printer", "Modem", "Speakable", and a couple things called "Open TPT".
    It gets worse. Then I decided to turn off some "unnecessary" things via the control panels, but somehow managed to disable the control panels themselves: AppleTalk, DialAssist, File Sharing, Modem, Mouse (as I saw that Microsoft Mouse was among the others), Remote Access, Speech, USB Printer Sharing, and possibly TCP/IP.
    That certainly didn't help anything (though upon restarting from the OS 9.2 Disc I was able to see the extensions and control panels in their respective "Disabled" folders in the System Folder). But I still wasn't able to get more Memory to Finder.
    So, I decided a few more PRAM resets might help, which succeeded in making both Internal Hard Drives disappear. I tried booting up from the DiskWarrior disc, but even the Mighty DiskWarrior couldn't find the drives. I performed the longer, in depth version of the Apple Hardware Tools tests, which reported that everything's fine (including the new RAM), but made no mention of the Hard Drives at all. The deadline having long passed, I shut the system down. I read through more posts and tech articles, etc.
    I searched my External drives with MacDrive on my XP, and found the drive that has the copy of my System Folder (which shows all extensions and control panels as enabled); not sure if the Quicksilver will boot from that, I don't know what the Keyboard command for booting from a FireWire drive is (if there is one) and the drive itself only has 900MB of free space.
    I can't find any reference to Internal ATA drives anywhere in the MacDrive documentation; if it was possible I'd put them into the XP, get the files off the Mac drives, reformat them and install OS9 from the Discs.
    This is where I am now:
    The Quick Silver is still powered down. I removed the Microsft mouse and replaced it with the OEM Apple mouse. I opened the case, and removed the PRAM/Backup battery (manufacture date: July 2001). Couldn't find my voltmeter, so took the bat to Radio Shack and bought a new one. Had the Radio Shack guy test the old one: it showed 3.69 volts still. Have not installed the new battery yet. The case is still open, waiting for any advice any of you might have to offer.
    Thank you all so much for your patience in perusing and pursuing this.
    Sincerely,
    Patterson
    Power Mac G4 Quicksilver 867   Mac OS 9.2.x   17" Studio Display, 512MB RAM

    Thank you Rodney and John,
    The jumpers are correct for both Maxtor Drives.
    Rodney, you are correct in that the initial problem (slow rendering/"out of Memory" crashes) was caused by my not realizing I'd stupidly captured several GBs of media to my system drive, and not checking which drives those files were on (as I'd assumed I'd put them on one of my external media drives) once that problem presented itself.
    Before I'd determined what I'd done, I bought the extra RAM. After I'd found the media files on the System Drive, and saw that my dedicated media drives were too full to easily move them, I decided to buy an additional Internal drive so that I could:
    -Move the Media onto it relatively quickly and finish my urgent project.
    -Juggle all my media into a more organized fashion for archiving (as most of my projects are on-going long-term affairs)
    -Wipe it, Partition it, and clone my System Drive onto it, as a spare bootable drive in case my OEM System Drive failed.
    Copying the Media files onto the New Drive and moving the System Drive's Media files into the Trash worked great: huge improvement in Rendering, etc.
    Before shutting down for the night I Emptied the Trash, and was pleased with the amount of space I'd freed up on the System Drive.
    My guess is that the System Drive was terribly fragmented, having been subjected to intense use over the past 5 years without any sort of Drive Maintainence, and deleting that massive amount from it in one shot caused my extreme system sluggishness upon Startup the next day.
    My subsequent lame attempts to solve the sluggishnes ultimately resulted in my losing access to both drives.
    Today, I replaced the Backup Battery, pushed the PMU, re-attached the AC, and Powered Up with the case open as per your suggestion.
    It was trying for a few minutes (the gray screen went black at one point, and then returned to gray) before presenting me with the flashing question mark.
    There was, however, a quiet but distinct "buzzing" sound that would alternate: 1 sec "buzz", one second silence, one second "buzz", one second silence, etc. coming from the drives, even after the "?" appeared.
    I powered down, removed the Ribbon and Power Cables from the new "Slave" drive, and powered up again, with the exact same results.
    I powered down, removed the Ribbon and Power cables from the original "Master" drive, reinstalled the Jumper on the New Drive as "Master", plugged the End of the Ribbon and the Power cables into the New "Master" drive and powered up. The screen went to the "?" within 20 seconds instead of 4+ minutes, and no more "buzzing".
    I put the Apple Hardware Tools Disk in, ran the "long" test, and everything came out fine.
    I have to abandon this for now, but thanks again for your previous advice, and any more you may have!
    Cheers,
    Patterson

  • IMac G5 Internal Hard Drive Not Recognized

    I shut down my iMac G5 with the power button and not through the typical shutdown procedure once and then when it booted up it would not get past the gray screen. I eventually used the Leopard DVD to try to boot it and was able to get to disk utility to look at the drive. I tried to repair the drive but then the machine froze and I had to restart once more. Now the internal hard drive isn't recognized or seen at all. I actually switched out the SATA hard drive with another spare I had and that was not recognized either. I can get the mac to recognize the installation DVD still so I know my computer still functions properly but I just need it to recognize the drive now. Does anyone have any ideas how to resolve this?

    Have you access to DiskWarrior or TechToolPro? Either of those might fix your problem otherwise, try booting from the Apple Hardware Test on your install disc and see what it says.

  • Slow Mavericks - internal hard drive failure?

    Hi
    I recently updated my iMac 2.5 GHz Intel Core i5 4GB RAM to Mavericks. Before I was working on OS X Lion 10.7.5. Until the day I updated I never had any problems with my computer being slow, unless when I was using heavier applications or heavy files like in Adobe PS for example.
    Since I've updated however, it often happens that the icons in my launchpad load slowly, my computer shows the spinning circle more often, and especially Microsoft applications (Word and Excel) take much longer before they are launched. I don't think I have to explain how this is bugging me, since we all like a fast computer. So I kind of regret updating.
    I wanted to downgrade to 10.7.5 again, but this doesn't seem that easy even though I know my way around reformatting Apple computers…
    So this is kind of a last option. Now I went to the Apple store in Belgium, and they told me that it could be a bug and that I should wait for the next version (yeah right…) or that it could be my internal hard drive was failing. Now I tried to find some information on how to recognize a failing hard drive, but I mostly bumped in to extreme errors. So I was wondering how to know your internal drive is failing? Second of all could it be failing all of a sudden? Since I hadn't had those problems before I updated. Thirdly is it possible that the next update would solve these problems, as they mentioned? Could a clean install help?
    Anyway, I find it pretty weird, and there's a lot of different opinions and options, so I would like a more expert view on the problem, so get to a solution and an answer whether or not my disk could be failing, cause then I would like to get it replaced.
    Thanks in advance for your advice!
    Grts
    Matthias
    In a previous topic, I was asked to deliver some information in order to get a diagnosis, but there has been no more answer. This is why Now I would like to ask if anyone can interpret this info below… Cause I have no idea what it means…
    When I entered the following query in Terminal this is what happened:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
    It produced a text editor window without any content. It didn't take long either, just one or two seconds. (Is this normal?) Does this mean my hard drive is intact?
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any. - there are none
    Reset the System Management Controller. - does this simply imply that I have to hold the power button for 10 seconds?
    Run Software Update. If there's a firmware update, install it. - done
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it. - not the case
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    - not the case
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    - not the case
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change. - not an icloud user
    Check your keychains in Keychain Access for excessively duplicated items.
    - not the case either
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk. - is this necesary if the former step didn't bring up any text in the text editor window?
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    - not the case
    Since I am doing jack right now and am solely typing this topic, the highest %CPU is about 2-3 percent and is "Safari web material". In the second place there is Safari with about 1-1.5%.
    System is about 0.76, user 0.89 and inactive is the leftover. 98,"something".
    In the memory tab:
    In the disk tab… It varies a lot:
    After launching the Console application, I copied the 50 or so most recent entries in the log All Messages from the SYSTEM LOG QUERIES menu on the left. This is the result:
    27/01/14 18:13:56,000 kernel[0]: IOThunderboltSwitch<0xffffff80356b5200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 1 unplug = 0
    27/01/14 18:13:59,000 kernel[0]: [ PCI configuration begin ]
    27/01/14 18:13:59,000 kernel[0]: [ PCI configuration end, bridges 14, devices 18 ]
    27/01/14 18:14:10,094 fseventsd[49]: could not open <</Volumes/"name"/.fseventsd/fseventsd-uuid>> (No such file or directory)
    27/01/14 18:14:10,095 fseventsd[49]: log dir: /Volumes/"name"/.fseventsd getting new uuid: "…"
    27/01/14 18:14:10,000 kernel[0]: hfs: mounted "name" on device disk1s3
    27/01/14 18:14:19,385 mds[39]: (Warning) DiskStore: Server returned -1 setting attributes
    27/01/14 18:14:37,139 sandboxd[330]: ([1116]) mdworker(1116) deny file-read-xattr /Volumes/"name" 3TB/Backup Januari 17:01:2014/Mailboxes (pre-plugin fstype:hfs fsflag:"…" diag:0 isXCode:0 uti:com.apple.mail.mbox plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 71392)
    27/01/14 18:14:37,164 sandboxd[330]: ([1122]) mdworker(1122) deny file-read-xattr /Volumes/"name"/Backup Januari 17:01:2014/Mailboxes (pre-plugin fstype:hfs fsflag:4A09018 flags:250000005E diag:0 isXCode:0 uti:com.apple.mail.mbox plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 71387)
    27/01/14 18:15:29,970 WindowServer[87]: disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
    27/01/14 18:15:32,310 WindowServer[87]: common_reenable_update: UI updates were finally reenabled by application "Safari" after 3.34 seconds (server forcibly re-enabled them after 1.00 seconds)
    27/01/14 18:17:35,918 ntpd[113]: ntpd: time set -0.367612 s
    27/01/14 18:17:35,943 com.apple.time[150]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    27/01/14 18:17:35,946 com.apple.time[150]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    27/01/14 18:17:48,846 com.apple.SecurityServer[14]: Killing auth hosts
    27/01/14 18:17:48,846 com.apple.SecurityServer[14]: Session 100029 destroyed
    27/01/14 18:18:45,357 mdworker32[1162]: CGSConnectionByID: 0 is not a valid connection ID.
    27/01/14 18:18:45,357 mdworker32[1162]: CGSGetSpaceManagementMode: No connection with id 0x       0
    27/01/14 18:23:57,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1219[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
    27/01/14 18:24:32,979 VDCAssistant[1221]: AVF encoder error: fail to create accelerator instance
    27/01/14 18:25:15,338 com.apple.SecurityServer[14]: Killing auth hosts
    27/01/14 18:25:15,338 com.apple.SecurityServer[14]: Session 100038 destroyed
    27/01/14 18:25:15,342 com.apple.SecurityServer[14]: Session 100040 created
    27/01/14 18:25:15,345 com.apple.security.XPCKeychainSandboxCheck[1229]: Can't get sandbox fs extension for /Users/Home/Library/Application Support/Adobe/AIR/ELS/com.adobe.amp.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    27/01/14 18:25:15,346 com.apple.security.XPCKeychainSandboxCheck[1229]: Can't get sandbox fs extension for /Users/Home/Library/Application Support/Adobe/AIR/ELS/com.adobe.amp.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    27/01/14 18:25:15,346 com.apple.security.XPCKeychainSandboxCheck[1229]: Can't get sandbox fs extension for /Users/Home/Library/Application Support/Adobe/AIR/ELS/com.adobe.WidgetBrowser.E7BED6E5DDA59983786DD72EBFA46B159 8278E07.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    27/01/14 18:25:15,346 com.apple.security.XPCKeychainSandboxCheck[1229]: Can't get sandbox fs extension for /Users/Home/Library/Application Support/Adobe/AIR/ELS/com.adobe.amp.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    27/01/14 18:25:15,346 com.apple.security.XPCKeychainSandboxCheck[1229]: Can't get sandbox fs extension for /Users/Home/Library/Application Support/Adobe/AIR/ELS/com.adobe.WidgetBrowser.E7BED6E5DDA59983786DD72EBFA46B159 8278E07.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
    27/01/14 18:25:15,346 com.apple.security.XPCKeychainSandboxCheck[1229]: Can't get sandbox fs extension for /Users/Home/Library/Application Support/Adobe/AIR/ELS/com.adobe.WidgetBrowser.E7BED6E5DDA59983786DD72EBFA46B159 8278E07.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
    27/01/14 18:25:16,750 Mail[1227]: Could not create query for expression ((null)) && (kMDItemContentType == 'com.apple.mail.emlx')
    27/01/14 18:25:17,116 WindowServer[87]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    27/01/14 18:25:18,209 WindowServer[87]: common_reenable_update: UI updates were finally reenabled by application "Mail" after 2.09 seconds (server forcibly re-enabled them after 1.00 seconds)
    27/01/14 18:26:58,258 WindowServer[87]: CoreAnimation: context hosting changed while locked!
    27/01/14 18:29:03,058 com.apple.launchd[1]: (com.apple.WebKit.WebContent.4A179DCB-D12E-433B-B053-89B6CA18DF91[1233]) Exited with code: 1
    27/01/14 18:30:53,000 kernel[0]: hfs: unmount initiated on "name" on device disk1s3
    27/01/14 18:31:01,000 kernel[0]: IOThunderboltSwitch<0xffffff80356b5200>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 1 unplug = 1
    27/01/14 18:31:01,000 kernel[0]: [ PCI configuration begin ]
    27/01/14 18:31:01,000 kernel[0]: [ PCI configuration end, bridges 12, devices 18 ]
    27/01/14 18:31:01,000 kernel[0]: Fixing incorrect zfree from zone kalloc.16 to zone kalloc.32
    27/01/14 18:31:40,520 login[1261]: USER_PROCESS: 1261 ttys000
    27/01/14 18:34:18,863 mDNSResponder[40]:  48: Could not write data to clientPID[1131](com.apple.WebKi)  because of error - aborting connection
    27/01/14 18:34:18,863 mDNSResponder[40]:  48: DNSServiceGetAddrInfo      v4v6 e4233.b.akamaiedge.net. PID[1131](com.apple.WebKi)
    27/01/14 18:46:49,368 com.apple.IconServicesAgent[225]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/XPCServi ces/com.apple.ShareKitHelper.xpc/
    27/01/14 18:46:49,450 com.apple.IconServicesAgent[225]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServic es/com.apple.WebKit.WebContent.xpc/
    27/01/14 18:46:49,701 com.apple.IconServicesAgent[225]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/MailService.framework/Versions/A/XPCSe rvices/com.apple.MailServiceAgent.xpc/
    27/01/14 18:46:49,834 com.apple.IconServicesAgent[225]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/CoreServices/Dock.app/Contents/XPCServices/com.apple.doc k.extra.xpc/
    27/01/14 18:46:49,988 com.apple.IconServicesAgent[225]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServic es/com.apple.WebKit.Networking.xpc/
    27/01/14 18:50:27,143 com.apple.IconServicesAgent[225]: Icon filename entry missing from bundle info dictionary for bundle at URL: file:///System/Library/PrivateFrameworks/InternetAccounts.framework/Versions/A/ XPCServices/com.apple.internetaccounts.xpc/
    27/01/14 18:53:26,913 WindowServer[87]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    27/01/14 18:53:26,942 WindowServer[87]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    27/01/14 18:55:40,974 login[1261]: DEAD_PROCESS: 1261 ttys000
    27/01/14 18:55:55,199 Console[1343]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.

    I was copying files to my external drive a few minutes ago, and my computer was reaaaally slow at that time. So I figured opening the Activity monitor and I took some screen shots:
    The only thing I tried to interpret is the CPU tab. It shows 94.67% was inactive, and still my computer was being terribly slow… Is this normal and is this the right interpretation?

  • I move folders from my internal hard drive twice to an external hard drive.  Now I believe Lr does not know how to find my photos.  What can I do to get this cleared up.

    I move folders from my internal hard drive twice to an external hard drive.  Now I believe Lr does not know how to find my photos.  What can I do to get this cleared up. 

    Jim has a very good suggestion. There are many factors at work here:
    1) How are you connecting the external drive to the computer?
    2) How big are files (329 x 1MB is not the same as 329 x 25MB)?
    3) What is your computer specification?
    4) Do you have any power saving settings on (in particular something that would send the computer/hard drives to sleep)?

  • Incredibly slow MacBook, Internal Hard Drive issues...

    Good morning everybody! I'm apologize if this post is extremely wordy...
    I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
    _Brief history:_
    Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
    I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
    I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
    I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
    Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
    _Now for the kicker..._
    My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
    I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
    I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
    I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
    Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
    I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
    Conclusion:
    I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

    Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
    I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
    On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
    So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
    Thank you all for your time!
    :D

Maybe you are looking for