Internal Harddrive Maximum Capacity

Does anyone know if I am able to upgrade to an internal Hitachi Travelstar 160 gb ATA harddrive in my iBook G4 (12", 1.2 ghz, OS 10.4.10, 768 GB RAM)? I have heard with ATA 100 there is a cap at 120 gb? Can anyone verify the maximum capacity the iBook will support. I am running my 30 gb stock drive and am being driven crazy by lack of space. I'd like to get as large an internal as possible for the money I have available. Thanks.
iBook G4 12" 1.2 ghz   Mac OS X (10.4.9)  

Hi, and welcome to Apple Discussions.
The Apple Knowledge Base article on limitations on hard drive size:
http://docs.info.apple.com/article.html?artnum=86178
seems to indicate that the 160 GB drive should work.
Good luck with the new hard drive.

Similar Messages

  • Errors with Queue exceed maximum capacity of: '65536' elements

    I faced this issue recently , where the messaging bridges from an external domain was not able to connect my my domain.
    When i checked the logs i found one of the server with the below error.
    ####<Feb 28, 2011 7:31:23 PM GMT> <Warning> <RMI> <dyh75a03> <managed06_orneop02> <ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <
    BEA-080003> <RuntimeException thrown by rmi server: weblogic.rmi.internal.BasicServerRef@a - hostID: '4275655823338432757S:dywlms06-orneop02.neo.openreach.co
    .uk:[61007,61007,-1,-1,61007,-1,-1,0,0]:dywlms01-orneop02.neo.openreach.co.uk:61002,dywlms02-orneop02.neo.openreach.co.uk:61003,dywlms03-orneop02.neo.openrea
    ch.co.uk:61004,dywlms04-orneop02.neo.openreach.co.uk:61005,dywlms05-orneop02.neo.openreach.co.uk:61006,dywlms06-orneop02.neo.openreach.co.uk:61007,dywlms07-o
    rneop02.neo.openreach.co.uk:61008,dywlms08-orneop02.neo.openreach.co.uk:61009,dywlms09-orneop02.neo.openreach.co.uk:61010:orneop02:managed06_orneop02', oid:
    '10', implementation: 'weblogic.transaction.internal.CoordinatorImpl@f6ede1'
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements.
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
    at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
    at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
    at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:374)
    at weblogic.kernel.Kernel.execute(Kernel.java:345)
    at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:312)
    at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1113)
    at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1031)
    at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:225)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:805)
    at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:782)
    at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:705)
    at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:651)
    at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
    >
    As a workaround , i had restart this server. After this bridges from ext domain was working.
    Has any one come across this issue before.
    Regards
    Deepak

    Found this issue again in one of the domains....the threads dumps is showing deadlocks.
    Found one Java-level deadlock:
    =============================
    "ExecuteThread: '3' for queue: 'weblogic.kernel.Default'":
    waiting to lock monitor 0868dea4 (object a4e99be8, a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer),
    which is held by "ExecuteThread: '6' for queue: 'weblogic.kernel.Default'"
    "ExecuteThread: '6' for queue: 'weblogic.kernel.Default'":
    waiting to lock monitor 00255304 (object b23be050, a weblogic.transaction.internal.ServerTransactionImpl),
    which is held by "ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'"
    "ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'":
    waiting to lock monitor 086677a4 (object a4e99c00, a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer),
    which is held by "ExecuteThread: '3' for queue: 'weblogic.kernel.Default'"
    Java stack information for the threads listed above:
    ===================================================
    "ExecuteThread: '3' for queue: 'weblogic.kernel.Default'":
         at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.release(TransactionLoggerImpl.java:1323)
         - waiting to lock <a4e99be8> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
         - locked <a4e99c00> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
         at weblogic.transaction.internal.TransactionLoggerImpl.release(TransactionLoggerImpl.java:389)
         at weblogic.transaction.internal.ServerTransactionImpl.releaseLog(ServerTransactionImpl.java:2767)
         at weblogic.transaction.internal.ServerTransactionManagerImpl.remove(ServerTransactionManagerImpl.java:1466)
         at weblogic.transaction.internal.ServerTransactionImpl.afterCommittedStateHousekeeping(ServerTransactionImpl.java:2645)
         at weblogic.transaction.internal.ServerTransactionImpl.setCommitted(ServerTransactionImpl.java:2669)
         at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1875)
         at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1163)
         at weblogic.transaction.internal.SubCoordinatorImpl.startCommit(SubCoordinatorImpl.java:274)
         at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
    "ExecuteThread: '6' for queue: 'weblogic.kernel.Default'":
         at weblogic.transaction.internal.ServerTransactionImpl.onDisk(ServerTransactionImpl.java:836)
         - waiting to lock <b23be050> (a weblogic.transaction.internal.ServerTransactionImpl)
         at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.write(TransactionLoggerImpl.java:1252)
         - locked <a4e99be8> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
         - locked <a4e99bb8> (a weblogic.transaction.internal.TransactionLoggerImpl$LogDisk)
         at weblogic.transaction.internal.TransactionLoggerImpl.flushLog(TransactionLoggerImpl.java:614)
         at weblogic.transaction.internal.TransactionLoggerImpl.store(TransactionLoggerImpl.java:305)
         at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:1850)
         at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2118)
         at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:259)
         at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
         at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:303)
         at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1279)
         at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1190)
         at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:1989)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:1985)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2686)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
    "ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'":
         at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.release(TransactionLoggerImpl.java:1322)
         - waiting to lock <a4e99c00> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
         at weblogic.transaction.internal.TransactionLoggerImpl.release(TransactionLoggerImpl.java:389)
         at weblogic.transaction.internal.ServerTransactionImpl.releaseLog(ServerTransactionImpl.java:2767)
         at weblogic.transaction.internal.ServerTransactionManagerImpl.remove(ServerTransactionManagerImpl.java:1466)
         at weblogic.transaction.internal.ServerTransactionImpl.setRolledBack(ServerTransactionImpl.java:2597)
         at weblogic.transaction.internal.ServerTransactionImpl.ackRollback(ServerTransactionImpl.java:1093)
         - locked <b23be050> (a weblogic.transaction.internal.ServerTransactionImpl)
         at weblogic.transaction.internal.CoordinatorImpl.ackRollback(CoordinatorImpl.java:298)
         at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
    Found 1 deadlock.

  • G5 randomly ejecting second internal harddrive 5 mins after startup?

    I recently upgraded my G5 from tiger to leapoard to make it compatible with my iphone4. For some reason it has now started ejecting my second internal harddrive containing movies and pictures 5 minuts or so aftr start up. Before that time the drive works perfectly.
    The computer is fully updated to 10.5.8.

    Do a little at a time and keep your fingers crossed.  You may have to remount and retry several times.  Of course, with it not staying mounted very long, larger files may be problematic.  I would hook up an external drive, copy from the failing drive to the other internal for maximum speed, then copy from the other internal to the external until I got everything off.  Best to get a FireWire external (most useful, but USB is OK) SATA enclosure or drive dock, put a bare drive into it so that when you are done, you can drop the bare drive into the machine in place of the failing drive.
    Oh, and one other thing I might try at some point is to shut down, remove and replace the SATA connectors to the failing drive to clean them up and then reboot.  I would not, however, do this until I had gotten the most important files off the failing drive.
    Then, once you have done that, you might want to get another couple of bare drives and use something like SuperDuper! or Carbon Copy Cloner (sorry, no handy link in my bad-o-tricks) to clone and keep current backups of the internal drives.  A SATA dock (toaster) might be just the thing, rather than a plain enclosure, certainly faster to deal with when you are swapping multiple drives around.  The linked example is a Quad interface that has actually come down in price the past couple of months.

  • Queue exceed maximum capacity of '256' elements.

              Has anyone seen this one before??
              Thanks
              Thomas
              weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity
              of: '256' elements.
              weblogic.utils.UnsyncCircularQueue$FullQueueException:      of: '256' elements
              at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
              at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
              at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:343)
              at weblogic.kernel.Kernel.execute(Kernel.java:338)
              at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:304)
              at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:923)
              at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:844)
              at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
              at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
              at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
              at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:681)
              at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:627)
              at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
              at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              

    Hi,
              The queue in question here is not a JMS queue. Instead,
              this is the "execute queue" of jobs waiting to be
              serviced by a thread in its thread pool.
              I think the size of these queues is configurable on the
              thread pool. Note that if dead-lock is locking up threads
              and causing the problem,
              you will likely need to increase the number of threads
              or dedicate server-side resources to their own thread pools
              rather than (or in addition to) increasing the size
              of the execute queues. (A thread dump helps
              in diagnose dead-locks.)
              Likely this error is on a server side thread pool, so
              there should be warnings/error messages in the server logs
              that describe what is happening.
              Tom
              Thomas Kreig wrote:
              > Has anyone seen this one before??
              > Thanks
              > Thomas
              >
              > weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity
              > of: '256' elements.
              > weblogic.utils.UnsyncCircularQueue$FullQueueException:      of: '256' elements
              > at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
              > at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
              > at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:343)
              > at weblogic.kernel.Kernel.execute(Kernel.java:338)
              > at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:304)
              > at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:923)
              > at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:844)
              > at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
              > at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
              > at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
              > at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:681)
              > at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:627)
              > at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
              > at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
              > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              

  • UnsyncCircularQueue$FullQ Queue exceed maximum capacity of: '65536' element

    dear friends:
    Does anyone knows the problem like this <BEA-002911> <WorkManager ClusterMessaging failed to schedule a request due to weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
    why this happend and how to solve it?
    thanks a lot!

    Hi,
    Weblogic has a maximum storage for Pending Request queue configured at 65536. At this point, it will stop accepting incoming request to your Server Socket port.
    This means that your Weblogic server / JVM very likely has depleted its internal Thread Pool triggering Weblogic to start queuing incoming requests; eventually reaching its maximum capacity.
    From a resolution perspective, you will need to investigate the root cause, Thread Dump generation and analysis will be required in your case.
    Please generate a JVM Thread Dump (kill -3 <pid> for UNIX OS) and share detail on Thread contention / problem pattern.
    Thanks.
    P-H
    http://javaeesupportpatterns.blogspot.com/

  • BEA-000802 : Queue exceed maximum capacity of: '65536' elements.

    Hi,
    I am getting following error in my weblogic server. Its version is 10.3.3.0
    And after some time, server is not showing its state. Usually if the server is running properly, its state is "OK". But after the following error messages, my server is not showing any state and applications are not running.
    ####<Nov 11, 2010 5:18:50 AM GMT+05:30> <Error> <Kernel> <APP1> <Server1> <[ACTIVE] ExecuteThread: '360' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1289432930650> <BEA-000802> <ExecuteRequest failed
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements.
    weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
         at weblogic.utils.UnsyncCircularQueue$FullQueueException.<init>(UnsyncCircularQueue.java:147)
         at weblogic.utils.UnsyncCircularQueue$FullQueueException.<init>(UnsyncCircularQueue.java:144)
         at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:71)
         at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
         at weblogic.rjvm.MsgAbbrevJVMConnection$WritingState.sendNow(MsgAbbrevJVMConnection.java:511)
         at weblogic.rjvm.MsgAbbrevJVMConnection.canSendMsg(MsgAbbrevJVMConnection.java)
         at weblogic.rjvm.MsgAbbrevJVMConnection.sendMsg(MsgAbbrevJVMConnection.java:181)
         at weblogic.rjvm.MsgAbbrevJVMConnection.sendMsg(MsgAbbrevJVMConnection.java:142)
         at weblogic.rjvm.ConnectionManager.sendMsg(ConnectionManager.java:593)
         at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:901)
         at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
         at weblogic.rjvm.MsgAbbrevOutputStream.sendOneWay(MsgAbbrevOutputStream.java:400)
         at weblogic.rjvm.BasicOutboundRequest.sendOneWay(BasicOutboundRequest.java:105)
         at weblogic.rmi.internal.BasicRemoteRef.sendOneway(BasicRemoteRef.java:271)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:214)
         at weblogic.management.logging.DomainLogHandlerImpl_1033_WLStub.publishLogEntries(Unknown Source)
         at weblogic.logging.DomainLogBroadcasterClient$2.run(DomainLogBroadcasterClient.java:209)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    And even I am getting out of memory error warning.
    ####<Nov 11, 2010 7:34:46 AM GMT+05:30> <Critical> <Health> <APP1> <Server1> <weblogic.GCMonitor> <<anonymous>> <> <> <1289441086135> <BEA-310003> <Free memory in the server is 2,953,904 bytes. There is danger of OutOfMemoryError>
    My server arguments are
    -XX:PermSize=256m -XX:MaxPermSize=256m -Xms1024M -Xmx2048M
    Please tell me where the things are going wrong.

    This wls instance can't afford huge requests.
    See the following error
    ####<Nov 11, 2010 5:18:50 AM GMT+05:30> <Error> <Kernel> <APP1> <Server1> <[ACTIVE] ExecuteThread: '360' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>>
    This ExecuteThread number is 360th.
    I think your instance is already too busy.
    I guess OOME is second issue.
    If i have to solve this problem, i consider several follow things.
    1. Check the total requests.
         - I guess we need to sizing of wls instances.
    2. Extend wls instance count.
         - Under 100 ExecuteThread per wls instance
    3. Find long term requests, especially STUCK thread.
         - Tuning that requests under JTA timeout.
    4. Set the -Xms and -Xmx as same value.
         - For performance.
    I hope this will be helpful to you

  • SQL Loader-704: Internal error: Maximum record length must be = [10000000]

    Hi,
    running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
    Any idea what could cause the problem?
    Thanks in advance!
    Ingo
    And here's an extract from the log file generated by SQLLoader :
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array: 1360 rows, maximum of 10485760 bytes
    Continuation: none specified
    Path used: Conventional
    Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
    Insert option in effect for this table: APPEND
    TRAILING NULLCOLS option in effect
    Column Name Position Len Term Encl Datatype
    UUID FIRST * O(X07) CHARACTER
    DOMAINID NEXT * O(X07) CHARACTER
    LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
    ANNIVERSARY NEXT * O(X07) CHARACTER
    BIRTHDAY NEXT * O(X07) CHARACTER
    COMPANYNAME NEXT * O(X07) CHARACTER
    DESCRIPTION NEXT * O(X07) CHARACTER
    FIRSTNAME NEXT * O(X07) CHARACTER
    COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
    FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
    GENDER NEXT * O(X07) CHARACTER
    HOBBIES NEXT * O(X07) CHARACTER
    HONORIFIC NEXT * O(X07) CHARACTER
    JOBTITLE NEXT * O(X07) CHARACTER
    KEYWORDS NEXT * O(X07) CHARACTER
    LASTNAME NEXT * O(X07) CHARACTER
    LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
    NICKNAME NEXT * O(X07) CHARACTER
    PREFERREDLOCALE NEXT * O(X07) CHARACTER
    PREFERREDCURRENCY NEXT * O(X07) CHARACTER
    PROFESSION NEXT * O(X07) CHARACTER
    SECONDLASTNAME NEXT * O(X07) CHARACTER
    SECONDNAME NEXT * O(X07) CHARACTER
    SUFFIX NEXT * O(X07) CHARACTER
    TITLE NEXT * O(X07) CHARACTER
    CONFIRMATION NEXT * O(X07) CHARACTER
    DEFAULTADDRESSID NEXT * O(X07) CHARACTER
    BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
    TYPECODE NEXT * O(X07) CHARACTER
    OCA NEXT * O(X07) CHARACTER
    SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]

    As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name.  This will give a count of the number of lines (delimited by CHR(10) ) that are in the file.  If this is not close to the number you expected, then that is your problem.
    You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
    HTH
    John

  • My Mac G5 crashed 2 years ago, and I am trying for format a 3 TB internal harddrive.

    Hi There,
    I am trying to format a 3 TB internal harddrive, so that I can reinstal Final Cut Pro 4 on to this new drive, in order to continue editting video. My last hard drive crashed and I was unable to pull anything off of it, so I am starting from scratch. I did have two hard drives, one died and the other one is where all my applications were stored. The 2nd drive is still good, but I running out of space for my video files, hence the reason for this newest drive.
    I am working off of a Mac Pro G5 and I believe I was running the OS X 10.4 software. I have the start up disk to install it on my new drive. However, when I try to format the drive, my computer stops working and my mouse pointer begins to spin a rainbow ball and then I end up having to quit disk utility. I am half afraid, I will eventually make the new drive non-operational. So I need a little help.
    My questions are these as follows:
    When I try to format the 3 TB hard drive, should I consider partitioning it?   What is the up scale to partitioning a hard drive? What is the downfall of that option?
    Also, I am able to verify the disk, however the disk shows up as untitled and it only shows up as 746.4 GB, where as I thought it should show up as 2.7 TB. Am I doing something wrong?
    I would greatly appreciate some help in this.
    Thanks.
    TallG

    So I was able to format the 3TB hard drive, but it only formated it as 736GB
    Oh, only 10.4.11 & up can see the new Adavanced Format Drives properlly, they now have 4096 Byte Sectors instead of the old 512 Byte sectors, so that explains the shortage there.
    The Highest you can go is 10.5.8
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
    There are workarounds if the 867MHz CPU is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    http://lowendmac.com/osx/leopard/unsupported.html
    List of Applications Not Compatible with Leopard...
    http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

  • Help with opening up a Seagate Barracuda SATA Internal HardDrive on my Macbook Pro!

    Hi Everyone!
    I have two questions that I would really love someone to
    help me out with!!
    I really need help trying to open three Seagate Barracuda SATA Internal HardDrive that I was given to edit
    dailies for a feature film! I tried all three and only one worked - however, didn't opened but wanted me to intialize
    it and reformat it so it can be discovered and opened. But all three contain video and audio files within them, so I cannot
    reformat these drives!
    And with the other two, apparently they can be opened on a PC but I have to edit my dailies
    on Final Cut 7 - and from what I know, Final Cut Pro is not avaiable for PCs!!
    If there is anyone that can answer these two question, please respond soon!!
    Thanks!

    I suspect those HDDs are NFTS formats.  Paragon may be the answer for you then:
    http://www.paragon-software.com/home/ntfs-mac/
    Regarding Final Cut, I suggest you post that part of your query on the Final Cut forum where you will have  the best chances for an accurate solution.
    Ciao.

  • What's The Maximum Capacity of Mac Mail

    Hi All
    I am new in Mac world, I was using outlook in windows with many email, the email files around 3GB, I did the converter of emails by using outlook2mail application.
    My questions are, how much the maximum capacity of mac mail, and now I am using mac mail with few emails, its working fast, if I transfer all my emails to mac mail (1000s emails, around 3GB) is it will work in same speed or it will work slow or die ?
    Thanks
    Khalid

    You've asked an unanswerable question. To my best knowledge there are no limits, other than as Barney says the available space on your hard drive. Also, it's impossible to quantify it because email messages vary in size. Do you delete large attachments? Have you created new Mail folders Mail > Mailboxes Sidebar > +? I do have a friend who has over 20,000. If anything gets mucked up you can always rebuild a mailbox from your Mail menu > Mailbox >Rebuild.
    -mj

  • Internal harddrive on MBP information corrupted

    Hi all
    During a empying process of the trash in secured mode my MacBook Pro shut down suddenly and restarted by himself.
    After resuming I finished the task on the trash and in order to check how much of empty space on the internal harddrive I gain I done a Read Information on my Macintosh HD drive and I saw that the information related to used and empty space on the harddrive wasn't correct.
    I checked with Disk utilities and there no problem, the values of used and free space are OK
    Any idea how to sort this please ?
    Best regards
    Bkantique

    I had the same problem. After several attempts I went to browse this discussion group from a different machine to check if others had the same issue. This took maybe 5 ot 10 min. and to my surprise when I looked again at the MBPro screen the installer had seen the disc.
    Very weird. It tooks several minutes to the installer to see the disk, without any indication that it was actually still doing something, so I thought it was dead.

  • Help! downloaded 2 data recoveries on the app store and didn't realize that one doesnt search the internal harddrives?

    so i purchased two of the data recovery apps. except one was by mistake. "FileAngel Lite" didn't realize that app didnt search internal harddrives. is there a way i can cancel that purchase on my Apple ID?

    Hi...
    I already replied to you here >  https://discussions.apple.com/message/17843887#17843887
    Please do not start duplicate topics.  

  • Westerndigital internal harddrive is not recognised

    Hi there,
    I have tried to replace my old hitachi internal harddrive in a mid2010 macbookpro 13inches with a westerndigital internal harddrive designed for osx lion.
    Unfortunately, this is not recognised once i insert it in.
    Has anybody had this type of problem? How did u sort it out?
    Alternatively, what other internal hard disk would u advice?
    Wd claims it s apple's fault as they are required to provide the right drivers with the software updates.
    Unfortunately, apple does not believe so.
    The hardrive is not faulty as i have been using as an external harddrive so far.
    Your help would be really appreciated. Many thanks in advance. Luigi

    >> how do I know if the cable i am gonna will not have the same issue
    You don't, until it's replaced & solves the problem, although that's a fairly regular problem on these forums. It's more common though, for the drive to be visible in DU, & yet fail to start up properly, or perhaps show as a startup option... & your new drive is no faster than the original, so it's hard to say for sure without replacing one or the other. I'd plump for the drive, if it were me, despite it working externally.

  • I get an input/output error when i try to restore a functioning backup from my external harddrive to my new internal harddrive through disk utility?

    my hardrive Had a smart status warning so i made a backup of it on my external harddrive through disk utility. i checked to make sure that the backup was working and i had no problems with it. i then bought a new internal harddrive and swaped it out but when i was in recovery mode to try to restore my new hardrive i kept getting an error message saying restore error, input/output error

    The big dilemma with a new Internal drive is separating Drive operation from 'inside the MacBook' operation. If you had an External Enclosure, you could do all the work (including booting up from the new drive) using the External enclosure.
    Then if a know-good drive develops problems only when moved inside the MacBook, it is time to try a replacement cable.

  • Is it possible to increase the internal hard drive capacity of my 500GB time capsule?

    I have a 500GB time capsule bought 2008.  I am now backing up two laptops to it, a macbook pro and a macbook.  It is likely that soon their combined data will outstrip the capacity of the time capsule.  (I increased the internal hard drive capacity on the macbook recently to 640GB).
    Is it possible to add to the internal hard drive capacity of the time capsule?  If so, do I just source extra capacity from a third party supplier as I did for the new hard drive for the macbook?
    Any experience or advice appreciated.

    It's possible to pull the hard drive from the Time Capsule case and replace it with a larger capacity drive, but you might want to keep in mind that since Time Machine will "see" this as a "new" drive, it will make a complete backup of both computers to start and then backup incrementally after that.
    If you were thinking of transferring the existing data on the 500 GB drive, that is possible as well.
    But, you will not be able to tell Time Machine to simply continue backups to those same files. For that reason, it might make sense to look for a separate drive enclosure to install the "old" drive in case you need access to your older Time Machine backups.
    After a few months, you may decide that you really don't need all the old Time Machine backups on the old driive and you may decide to simply erase the drive and use it as a spare.

Maybe you are looking for

  • Iphone 4s wont power on and is charged

    iphone 4s will not power on and is charged

  • $PROFILES$.FILENAME, $PROFILES$.PRINTER and $PROFILES$.CONC_COPIES

    Hello All, I am developing BI Publisher reports. One of my requests is to auto print the generated output(PDF) file. When I asked the client to use normal printing functionality from concurrent manager, they said it requires user level profile option

  • Problem in corrency conversion

    Hi fnds, In my requirement. iam sending data.but in that invtry_cost_paid field is not getting proper currensy.here i find out that the actual currency is EUR it was converting in to USD.what i find out is getting dollers that are not the inventory a

  • WHEN I PLUG IN NANO IT SAYS iPodserve Module has encouterd a problem

    ok, my nano has never worked and I've posted a lot of posts like "sheppy please help m...."but, the thing about it is that it still doesn't work. I just updated to the newer versioon of iTunes and now instead of thsi foler popping up when I connect m

  • Cannot type password or anything in the help search bar

    Just recently, after the 10.5.2 upgrade and the Leopard Graphics update, when my Powerbook is in sleep mode and it starts up, the password prompt box is displayed, as normal, but not it will not let me type anything in the password box. There are no