Internal HD does not show in Finder

Hello all,
I'm booting, and running, my 800Mhz 15" iMac G4 from an external firewire drive while I figure out how to repair and restore my internal HD.
Right now I can't boot from my OS X Tiger Install DVD, or from my DiskWarrior DVD. Also, Disk Utility 'locks up' and I have to 'force quit' it.
Any suggestions?

I could fix the problem if the optical drive responded. (I didn't mention that, did I?) The draw will only open if I hold down the mouse button when starting. The draw won't shut, and the drive won't read.
iMac G4 15" 800 Mhz   Mac OS X (10.4.5)  

Similar Messages

  • HT201737 how do you close a thumb drive that does not show in finder?

    How do you close a thumb drive that does not show in finder?

    What do you mean by "Close?"
    Eject??
    If so, you could use Go to Computer to find it if it is not in the Sidebar or on the Desktop. Ctrl-click or Right-click on the drive and choose Eject <diskname>
    Or, you could set it to show in the SideBar in the Finder Preferences, SideBar tab. Then, it would have an eject icon next to it in the Sidebar.

  • Song plays in iTunes, but file does not show in Finder

    Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physical location where iTunes shows it to be.  
    An example is below... these are two song file locations from the 'Master Tune Library.xml' exported from iTunes.  Both of these files
    show in iTunes, and they both play just fine from iTunes (no exclamation mark next to the song names). Yet only the first file (one ending in 1219.mp3)
    is at that location.  The one ending in 1249.mp3 does not show in that location, either via Finder, or via Terminal.
    From Terminal I get no results from "find /Volumes/LaCie500 -name espace_20101103_1249.mp3"  (without the dbl quotes) But if I run the same command for the 1219 file, it does find it in the expected location.  Really stumped as from where iTunes is playing ...1249.mp3.
    /Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1219.mp3
    /Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1249.mp3
    Mac Mini
    Mac OS X 10.5.8
    iTunes 10.5
    iTunes Media folder location is /Volumes/LaCie500/myTunes   Both options underneath for "organize" and "copy files ... when adding to Library" are checked.
    Thanks!

    Try using EasyFind utility to reveal the files.
    Are you absolutely positive those files exist? You have verified with iTune's summary view thatthe files is what you think it is?
    Show In Finder will usually not only open the directory but also leave the actual file highlighted.

  • AE shows WD External disk in Utility, does not show in Finder

    Hi,
    I just bought an AE (802.11n). The setup was relatively easy. I updated both the software Airport Utility (5.3.2) and Firmware (7.3.2).
    When I connect my freshly formatted (HFS+ Case-Sensitive + Journaled) external WD 120Gb HD (which has an external powersupply) to the USB port, it DOES show in the Airport Utility (though without the name), but I cannot connect to it, neither does it show in Finder, etc.
    When I take a freshly formatted (HFS+ Case-S, Jour.) Memorystick of 4Gb, and I plug it in it both shows in the Airport Utility and I find it in the shared section of Finder.
    I can attach the WD Harddrive to my local MBPro and it works fine (either through USB & Firewire)
    What is going on? Has anyone else experienced this (the topics I found dealt with Windows, or wrongly formatted, or Time Machine, etc.)?

    Thanx for your suggestion: this was however already checked. Just to make sure I unchecked and re-checked the option. No difference
    Except for the WD disk not showing (my intend is to get it working), an additional question would be: WHY is there no problem when using a memory stick?
    Apparently the memory stick has a 'quality/ability' which the external HD does not have causing it to function but which one?

  • Memup hard disc does not show in Finder

    I have attached a Memup 250GB hard disk by USB to my MBP. The disk does not show up in Finder, nor in Disk Utility.
    The disk works fine if I plug it into a PC. I have formatted it on the PC to FAT.
    Any suggestions on how I can get it to work on my MBP?

    Sounds like you have a connection issue.  Try all the USB ports and a different cable.
    Ciao.

  • Hard disk does not show in finder

    WE had a system failure with our server instance a month back and since then, one of my internal HD's will not show in finder. It's also causing carbon copy pro to fail when trying to find it. I have verified it can be seen in the disk utility and from a terminal prompt. I rant this to confirm:
    { diskutil list; echo; diskutil cs list; } | open -f -a TextEdit  
    No matter what I do, i cannot see it. Verify and repair in disk util come up saying it's okay. I have selected show HDD's in finder preferences. A possibly related side effect is that my users, who can browse this over the network, cannot search in the directory.
    Any help you can lend would be helpful.
    OSX version 10.8.4
    TC

    Not partitioned - part of a raid. Was initially formatted, yes. THis has been in production for a couple of years and just dropped out. "THIS DISK" is the disk that vanish. I renamed it for forum purposes.
    Results:
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS basecampHD              999.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI                         209.7 MB   disk1s1
       2:                  Apple_HFS HD2                     999.9 GB   disk1s2
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.5 TB     disk2
       1:                        EFI                         209.7 MB   disk2s1
       2:                  Apple_HFS THIS DISK               1.5 TB     disk2s2
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.5 TB     disk3
       1:                        EFI                         209.7 MB   disk3s1
       2:                  Apple_HFS TTHIS DISK.Backup        1.5 TB     disk3s2
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:        CD_partition_scheme                        *217.8 MB   disk4
       1:              CD_ROM_Mode_1 TSIXL-320W              189.7 MB   disk4s0
    /dev/disk5
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *3.0 TB     disk5
       1:                  Apple_HFS ServerTime              3.0 TB     disk5s1
    No CoreStorage logical volume groups found

  • Dvd drive does not show in Finder

    My DVD drives (internal and external) do not show in Finder.  Why?
    If I insert a disk, it will show, but not till then.
    I-Mac
    Model Name:
    iMac
      Model Identifier:
    iMac11,1
      Processor Name:
    Intel Core i5
      Processor Speed:
    2.66 GHz
      Number of Processors:
    1
      Total Number of Cores:
    4
      L2 Cache (per Core):
    256 KB
      L3 Cache:
    8 MB
      Memory:
    16 GB
    OS= Mt Lion

    I would like to burn to external as it is much faster and the internal is not liking me.
    So, if I pick a file in Finder and click Burn to DVD, it tries to burn to internal.

  • External hard disk does not show in finder

    WD usb external hard disk does not appear in finder.  Disk utility sees it and will mount/unmount and eject.  I ran repair disk util. and all is well but still does not appear in finder 

    Hey Hatter,  Thanx for the input. 
    Among other things I tried was a terminal routine someone suggested with no luck and new drivers/firmware for the drive, again, no luck. 
    I still don't know for sure what caused my problem, but I re-partitioned the drive and re-formatted it and that seemed to solve the provlem.  Sadly, I lost all my info that was backed up on that particular drive but hopefully it won't come back to bite me later. 
    Cheers!!

  • MP3 Player does not show in finder.

    I used to have a 1st gen iPod Touch, but that went through the wash and no longer functions. I am now using my backup player which is the first MP3 player I ever owned. It's a Philips GoGear HDD6330 player. The issue I'm having is similar to another issue I had awhile back with my camera. Actually, it's the same problem. When I plug the MP3 player into the MacBook USB Port, it shows up in the System Profiler, but does not appear in the Finder window as an external HDD (which it can indeed be used for when the installed firmware is bypassed as it can be in Windows). In Windows XP, the properties window of the HDD inside the player is that it is a Generic Hierarchical file system. I don't know if that has anything to do with the issue, but I thought I'd mention it anyways.
    I did a search of the community posts, and found several posts stating that I would need to use Disk Utility in order to gain access to the HDD. The problem with this is that I didn't have Disk Utility on my machine for some reason. I say "Didn't" because I recently used Pacifist to recover the App from the Install Disks. However, the version that was on the install disks was not compatible with 10.5.7. In the same post that I found the information about Pacifist (which I will link you to shortly) the last few lines state that after the app is installed, that the Combo Updater should be run to bring the app up to date as well as stating that the permissions need to be repaired. I don't know what that means or how to do it.
    http://discussions.apple.com/thread.jspa?messageID=6950717&#6950717
    I found the download for the Combo Update for 10.5.7, downloaded it, and ran the install program that was in the package which the .dmg file contained. Everything went smoothly, and I rebooted my MacBook. The Disk Utility app was still not up to date with the OS version. So I ran Pacifist again, only this time I extracted the app from the update installer package, and installed it (after getting rid of the old file that was not compatible with 10.5.7). This version (11.1) is indeed compatible, but it will not launch and also has the default application Icon with the paper, pen, pencil, and ruler. Pictures will be included.
    At this point I don't know how to get Disk Utility to work, and I'm not even sure if using Disk Utility will give me access to my players HDD. Apple Tech won't talk to me because my MacBook is out of warranty, and there's no way in **** I'm paying for a service that should not have to pay for.
    System Information:
    http://i3.photobucket.com/albums/y57/HCOPE/Picture34.png
    Jukebox in System Profiler, but not in Finder:
    http://i3.photobucket.com/albums/y57/HCOPE/Picture26.png
    Disk Utility:
    http://i3.photobucket.com/albums/y57/HCOPE/Picture30.png
    Disk Utility Package Contents
    http://i3.photobucket.com/albums/y57/HCOPE/Picture32.png

    Alrighty, that's one question answered. But how do I get Disk Utility back and working?

  • My MacbookPro will not recognize when a flash drive is put into the USB port. It does not show in finder at all.

    I put a HP flash drive into a USB port and it never shows in finder under devices. I want to copy photos to it to load onto a electronic picture frame. Why doesn't the flash drive show in finder?

    First, open up the Apple System Profiler by choosing  Apple Menu > About This Mac, and then click More Info.
    then select USB off the hardware list.  If your flash drive is connected to the system, it will appear here.  If it does not appear, there is a problem with either the port or the drive.
    If the flash drive shows up in the system profiler, the problem is in your Finder preferences. Finder prefs (⌘+comma) allow you to designate what shows up on the desktop and Finder sidebar.

  • My user name does not show in finder

    I recently had to do a re-install of OS X Yosemite on my brand new Macbook Pro due to some files being corrupt during the transfer of my aperture and iTunes librarys from my old iMac to the new Macbook. (Aperture appears to be the problem)
    After the re-install everything appeared as a new computer. After signing in to my accounts, I went to "Finder" to open my username and music file to transfer my iTunes library over.  My user name does not appear at all in the Finder sidebar. Have doing something wrong here.

    You can customize your Finder sidebar to show whatever you want. Some of the defaults (including the home folder you're talking about) are available by going to Finder menu - Preferences - Sidebar. You can add others by dragging them from the right side of the Finder window into the sidebar.
    Matt

  • Extra hard disk via USB time capsule (2TB) does not show in finder etc

    I've found hunderds of questions that look alike but not one has solved it.
    I have a Time Capsule with 2 TB hard disk. In all descriptions of the TC Apple states that an extra drive can be attached through the USB.
    I did that. Wanting to create an extra network drive.  I connected a (Apple formatted) WD Essential to the USB. With te newest airport configuration programm I do not see the hard drive. I do see it with version 5.6.  BUT: I cannot see what is on it and so (not) select anything. I don't see it with the finder. I did do everything to make sharing possible. When connected directly to IMac it works fine. In airport I selected sharing etc etc.  I don't want the disk to be used as a backup system (via Time Machine). Just an extra network disk. Please help.

    I don't have a Time Capsule; I have an AirPort Extreme Base Station, which is similar except for not having the built-in storage.  Since your question got moved from the initial category (where you posted it) to Time Capsule, maybe someone else who has a Time Capsule will pop by with some advice.  If you don't get any more replies (other than from me), you may want to summarized what you learned so far, and post a new question (in this category).  New questions often get more views and responses.
    With a Time Capsule, you can share the built-in hard drive as general network storage (not just for Time Machine  purposes), is that correct?  Does that work for you?  Can you set that up using the latest version of AirPort Utility?
    If you set that up, I'm guessing it would appear in a Finder window in the same way.  The Time Capsule appears in the Finder window sidebar, under SHARED.  When you select it, the Time Machine's built-in shared volume appears to the right, and you can mount it using whatever security settings you used.  If you have an external drive attached to the Time Capsule as well, and it is set up to be shared, it appears as a second shared volume.  It is still just that one Time Capsule under SHARED in the Finder window's sidebar, but to the right, there are now two shared volumes.  But I don't have a Time Capsule, so I'm not sure about that...
    I don't know why the latest version of AirPort Utility does not see the external drive volume?  If possible, I would try another USB storage device (even if it's a 4GB thumb drive), to confirm it does work, and it's not a hardware problem on the Time Capsule's USB port.
    Also, if you have not tried so far, you may want to reset your Time Capsule (to give it a fresh start).
    http://support.apple.com/kb/HT3728
    This also has some relevant information about attaching a USB drive.
    http://support.apple.com/kb/HT2426

  • HT6065 I updated my iMac computer to osx version 10.9.1 but now can't retrieve photo's from my lacie portable hard drive .  Also when my computer comes on it does not show the finder bar unless I have another program up like Safari...should I delete my up

    I have updated my iMac ot osx 10.9.1 but my screen no longer shows my finder bar unless I activate another program like mail or safari.  also I can't access photos stored on my portable hard drive that was used before the update.  Should I unsubscribe my update?
    Jennifer

    Did you make a backup of your system before you replaced the operating system?

  • USB  does not show in Finder

    Ok, I did something really stupid.  I'm new to using a MAC. Anyway I was trying to download software for a gopro and had to drag a file from the download menu to the "NO NAME" port under devices.  That didn't work so I tried doing it the opposite way, i.e dragged the "NO NAME" under devices into the downloaded file....poof.... it was gone.  Now none of my devices show up when connected to the USB hub. 
    I have searched all the questions and answers on google and in apple and still can not find where to go to reinstate it.  I have rebooted, restarted, gone into preferences etc..... still nothing.
    Can anybody help me out.  I'm pulling my hair out.
    Thanks

    All my ticks are in the right places, any other suggestions.  Don't even ask me to go to disk utilities as there is nothing there either.

  • IPod does not show in Finder or iTunes

    My 2nd generation Nano won't connect to my Mac. The screen alternates between a screen with a dimmed-out Apple logo, a screen with a message saying to restore using iTunes, and a screen showing a the small charged battery icon and a message saying do not disconnect.
    Of course I can't restore it using iTunes, because the computer isn't recognizing the iPod, and not disconnecting seems irrelevant, since it's not connected in the first place. (I've nevertheless left it plugged into the computer for about 3 hours in hopes it might resolve itself, but it doesn't look like it's going to.)
    The 3 screens alternate at about 1 second intervals. I've tried resetting the iPod and I've tried connecting with a different computer. When I try to reset with the iPod not connected to a Mac, the screen just goes to black. Then if I try reconnecting the USB, I just get the three alternating screens again. (I have the latest version of iTunes, and the iPod software is up-to-date as well. I'm using Snow Leopard on my iMac and Leopard on my laptop.) I've tried restarting the computer. In fact, I'm out of ideas, so I'd be very grateful if anyone has any suggestions.

    Hi CorCakalaka,
    Just to let you know, you're not on your own. My 30GB 5th gen iPod is doing the same, but I'm running on Windows XP. Tried everything in the support pages and nothing worked. Tried on my Nano and no problems. Hopefully someone who has had this problem and sorted it will get in touch (fingers crossed)

Maybe you are looking for