Internal HU number range for 2 different plants

Hi,
I have one plant with WM-HUM and internal number range for HU is 1.
Now implementation for a second plant (same controling area but different company codes), with his own WH number, is going to use WM-HUM.
I'm wondering what internal number range should be used for plant 2:
- same number range than P1 then no need to create new packaging material types. Just check if both plants accept to share numbers
- different number range to fastly identify which plant belongs to the HU number (without using HUMO)? But need to create new packaging material types.
Are there other SAP impacts of these solutions?
I have to precise there will be stock transport orders with deliveries between both plants.
Thank you.

Hello Cathy,
I would suggest to use the same number range considering the scenario you have mentioned .
Cheers
Kaushik

Similar Messages

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Correcting the duplicate number range for 57 f 4 challan

Dear Friends ,
By mistake I have maintained same number range for both my series group in J1I9 under object J_1I57FC.
Intially I was doing sub con transaction only for one plant , but recently I started doing sub con transaction of the other plant .
It allows me to create 57F4 challan in the second plant , but while using the challan number in MIGO , it shows an error message .
I cannot change the number range for the second plant now because the 57F4 challan has been generated .
Kindly guide me how can I correct the above problem.
Thanks in advance

Hi,
This is a problem for 57F4 challan number range you cannot use same number range for two different series group even while maintaining number range system not issue any message , i faced the same problem then from this fiscal year we have used two separate number range so better create new number range and assing in subcontracting attibutes as this we faced in development for the GR for which we found the problem is not solve.
regards,
zafar

Number ranges for Business Partner

Hello experts,
Can you please guide how to define different number ranges for differenet different parner functions such Bidder and Employee.
Presently when I create a new employee for a Business partner who has newly registered with SRM, they both are getting same range of BP number, which makes the user list very long to manage/search while creating BID/Auction invitation.
Please guide me. Thanks in advance
Vijay

Hello,
find below the settings of table T77S0 in our system. We use grouping Z4 for org units. Be aware of the fact that number range and grouping have to have the same ID in this case.
Regards
Wolfgang
GRPID SEMID GSVAL      ETEXT
HRALX HRAC X          Activate HR Integration
HRALX MERID X          Enter Integration Error in IDOC
HRALX MSGRE 0          Recipient of Error Message When Creating BP
HRALX OADBP            Business Partner of Standard Address
HRALX OADRE            Address Necessary for Business Partner?
HRALX OBPON ON         Integration O-BP Activated
HRALX OBWIG X          Ignore Business Partner Warnings
HRALX ONUMB 2          Business Partner Number Assignment (Org. Unit)
HRALX OPROL BUP004
HRALX OSUBG Z4         Business Partner Subgroup (Organizational Unit)
HRALX PALEO            Log: Organizational Units in ALE
HRALX PALEP            Log: Employees in ALE
HRALX PBPHR OFF        Employees Are Replicated from HR System
HRALX PBPON ON
HRALX PCATS            Integration P-BP for CATS Activated
HRALX PINAC            Activate ALE Distribution of Inactive Employees
HRALX PLEVE 3          Log: Detail Level of Error Messages (1 - 5)
HRALX PNUMB 3          Business Partner Number Assignment (Employee)
HRALX PPROL BUP003
HRALX PQUAL            Import Qualifications
HRALX PRTON            Log Active
HRALX PSUBG            Business Partner Subgroup (Employees)
HRALX PSYNO            Log: Organizational Units in Dialog
HRALX PSYNP            Log: Employees in Dialog
HRALX USRAC X          Create Relationship to User

Number range for rental object

rental object type rs and ps use the same number range ?Can I distribute the diffierent number range for the different type?

Dear Pan,
PS/RS/RU are called RO in RE-FX and use the same number range, however you can use BAdi to assign the required number to PS or RS.
RECACUST--> Master Data --> Usage View --> Rental Object--> Implement Enhancements (BAdI) --> Number Assignment, Validation, Substitution.
Kind regards,
Kishore

Different number range for Purchase requistion

Hi,
While converting Planned order to Purchase requisition (Manual Run), i need different number range for Purchase requistion for different plant.
I maintained different number ranges in OPPQ, and maintained number range in OMI3, the number range which i ahve maintained as per the plant are seems to be not working.
Can somebody help me in this..
Kariya...

hi,
Please define the number ranges with respect to the MRP group OPPR,OM12 and OM13 with respect to the plant and try hope it helps
Regaards
sravanthi
Edited by: Sravanthi683 on Jul 10, 2009 8:58 AM
Edited by: Sravanthi683 on Jul 10, 2009 9:00 AM

Different number ranges for same order type

Hi PP Guru's ,
Can anyone send me the user exit for the differnet number range creation for the same order type.
Same order type is used in two different Plants. So our client want to track the production order plantwise.
Thanx in advance.
Regards,
Nagraj

Hi Nagaraj,
The number range is defined at order type level ( i.e. client level)
So if you want to use different number range for different plant, then use different order type for different plants.
Thanks and regards
Murugesan

One order type different number range for different company code

Hi
I have created one order type. Same order type I extended in another company code (plant).
I required different number range for another company code.
Can any give detail solution.
Regards
ARK

Hi,
In CO82, define groups of order types. Define number intervals and assign number intervals to groups. Organize order types that you want to assign same number interval under groups.
Regards.

Different number range for recurring docs for diff company code

Hi,
We define X1 as the number range for recurring company codes. For 2 company codes, we have given the same number range for X1, 100000-1999999
Now when a recurring doc is posted for both the company codes monthly, the company codes have same dco number which confuses the user.
Is there any way to change the set up of the number range like deleting the one existing and starting with the new series
Any other suggestions are appreciated
-Vaibhav

Hello,
You cannot deleted the number range if it has already been posted, however, you just limit or restrict the upper limit equal to the current number.
Create a new number for other company code.
the number ranges are defined at company code level / fiscal year level.
The number ranges can be year dependent or year independent
They may be internal or external.
Regards,
Ravi

Different Number range for different objects

HI Gurus
Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
Your early Advise will be appreciated.
Thanks
Chandra

Hi Chandra,
SM31 -> T77IV : 01S -> Number Range Maintenance.
(or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
For the subgroups
01C (plan variant 01, Object type C) Job
01O (plan variant 01, Object type O) Org unit
01S (plan variant 01, Object type S) Position
Define the following number ranges respectively.
(EX 60000000 69999999)
(EX 70000000 79999999)
(EX 80000000 89999999)
Regards,
Dilek

Define PO Number Range for XYZ plant

HI,
I want to create the Number Range for PO.
Scenerio: -
I m working in ABC Plant and we define the number ranges for PO i.e starts with 4500000000 series.
But now we have 2nd plant XYZ. So we want to create new runmber range for that (should be start 5500000000).
Plz let me know, how can i define new number ranges for XYZ plant.
Regards

Dear Friend,
with respect to plant PO document type restriction not possible, so in this case copy the NB document type define the new document type
SPRO>>MM>>Purchasing>>Purchase order>>Define the no ranges and assign the no range to document type
SPRO>>MM>>Purchasing>>Purchase order>>Define the Document type here you assign that no .range to your document type
Regards
Pramod

External Alphanumeric Number Range for Internal Orders

Hello,
I am trying to create external number range for Internal Order Type. I want to create internal orders which will have internal order number as alphanumeric and some will be in only numbers.
How should be the range look like, so that I have flexibility to enter Internal Order number as whatever format I want i.e. T123, 12MP, 1234, ABCD etc.
Any help will be appreciated.
Thanks.

how many do you need?
Just one, that covers all?
a0000000 - zzzzzzzz

Number range based on different business area for same document type

Hi All,
The scenario is my client wants to give the different number range for a particular document type based on different business area.
Is there any user exit by which I can restrict the same.
Regards,
Meenakshi

Hello,
Document number ranges are created per company code and fiscal year. You cannot create / restrict the document number ranges per business area.
Business areas a independent of all organizational values, they cut across all company codes.
Regards,
Ravi

Number range for different order types

hi
pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
thanks and regards

Dear ,
Goto CO82 ,
1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
Revery back if u need any help
Regards
JH

How can I setup different number range for each company code?

Dear GURU,
Is it possible to setup different number range for material document by company code? If yes, what should i do.
Thank you in advance.
Thammarit

Hi,
you maintain the number assignment for the following documents:
material documents
physical inventory documents
The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
Caution: Change in the Fiscal Year
If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
Example:
Interval for 1995: 4900000000 to 4999999999 status: 4900451234
Interval for 1996: 4900000000 to 4999999999 status: 4900000000
If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
Physical inventory documents
Number range interval from 0100000000 to 0199999999
This group contains the following transaction/event types:
- IB Physical inventory documents
- ID Physical inventory documents for counts and differences
without reference
- IN Physical inventory documents for recounts
- IZ Physical inventory documents for count without reference
- WV Physical inventory documents for difference postings in the WM System
Material documents for goods movements and inventory differences
Number range interval from 4900000000 to 4999999999
This group contains the following transaction/event types:
- WA Goods issues, transfer postings, other goods receipts
- WH Goods movements for handling units (HU)
- WI Material documents for inventory adjustment postings
- WL Goods issues for delivery documents (SD)
- WQ Goods movements for usage decisions (QM)
- WR Goods movements for completion confirmations (PP)
- WS Goods movements for run schedule headers (PP)
- WZ Documents for batch status changes
Material documents for goods receipts
Number range interval from 5000000000 to 5999999999
This group contains the following transaction/event types:
- WE Goods receipts for purchase orders
- WF Goods receipts for production orders
- WO Subsequent adjustment of subcontract orders
- WW Subsequent adjustment of active ingredient materials
Inventory sampling numbers
Number range interval from 0200000000 to 0299999999
This group contains the transaction/event type SI.
SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
Note
For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
Actions
Check whether you can use the predefined groups and number intervals.
If you want to change any groups, proceed as follows:
a) Choose Group -> Maintain.
b) Select the transaction/event type that you want to re-allocate.
c) Place the cursor on the new group and choose Edit -> Assign element group).
d) Save your settings.
If you want to define new groups, proceed as follows:
a) Select Group -> Maintain.
b) Then select Group -> Insert.
c) Enter a text for the number range group.
d) Maintain the number interval for this number range group.
e) Allocate the transaction/event types to the number range groups (see step 2).
If you want to maintain new number range intervals for an existing group, proceed as follows:
a) Choose Group -> Maintain.
b) Select a group and choose Interval -> Maintain.
c) Choose Edit -> Insert year.
d) Maintain the number interval for the new fiscal year.
If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
Note on transport
You transport number range objects as follows:
In the initial screen, choose Interval -> Transport.
Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
Dependent tables are not transported or converted.
Thanks and regards
Rajesh

Internal HU number range for 2 different plants

Similar Messages

Maybe you are looking for