Internal ITS, IAC and PocketPC Browser

Dear all,
we have some self written IACs running on a PocketPC. After migration to WebAS 7.0 with internal ITS the IACs quit with "Browser version not supported". There is no problem running these IACs in the Browser, they are all classic IACs with just HTML code. No JS and so on. Anybody an idea how to tell WebAs not to throw the exception?
Kind regards
Roman Becker

Hi Roman,
SAP note 972116 deals with that issue.
Thanks and regards,
Dieter

Similar Messages

Cprojects 3.1 and internal ITS

Dear Sirs,
we are usign cprojects 3.1 in conjunction with internal ITS on WAS 6.40. In accounting and other places where there are links to SAP transactions, when clicked, they open a new window with the following url.
host/scripts/wgate/webgui/!?Calling parameter
However on the internal ITS this has changed quite to:
host/sap/bc/gui/sap/its/webgui?Calling parameters
I need to change the calling URL of cprojects in order to get cprojects to work with internal ITS. I have not seen any way to do this in customizing. Any ideas?
In note 668808 cProjects: HTTP error 404 when calling R/3 transaction, there is reference to a error with the ITS calling URL (how to force it to lower case). The corrections is done to METH CL_DPR_OLR3_WORKCREATE_URL_TRANSACTION
My plan is to rewrite this meth to use the new its path, however is this the correct way to do it? Or are there any other way to do it?
Regards,
Jørgen

Hello,
if the SAP server which are running FI/CO (accounting integration) does not have a standalone ITS, and is running WebAS 6.40 or higher, you can activate the ITS. I will not go into how this is done, as a fast search on sdn will provide you a much better answer.
The internal ITS is not a pre-requiste for calling controlling cockpit (or other transactions) from cProjects; the pre-requiste is an ITS server. However, whether this is a standalone or internal one does not make much of a difference.
regards,
Jørgen.

When differences in parameters in SICF and SE80? (internal ITS)

Dear Sirs,
When using the internal ITS it is nessicary to maintain parameters in both SICF and SE80.
In a case where it is a difference between the two, eg. ~theme 99 (SICF) and ~theme 90 (SE80), which will be the controlling one? (which has presedence over the other?)
Is it needed to set all the parameteres in SICF, or is it possible to set a bare minimum (~transaction and ~theme) and then set the rest in SE80. (as SICF can be out of the developers reach).
Best regards,
Jørgen Ruud

Thank you Klaus,
as usual a very good answer. I was under the impression that the parameters had to be maintained both places, which I found a bit strange.
Thanks for clearing this up to me.
Best regards,
Jørgen.

I just loaded Lion oxs 10.71 and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem

I just loaded Lion oxs 10.71 on my I-mac computer, and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem.

Mike,
I had a similar issue with Photoshop when I upgraded to both Snow Leopard and Lion. it turned out to be Rosetta is no longer present in the newer OS. Once I upgraded to Lion, Appleworks stopped working after all these years.

Application Server Session timed out (-11) (lack of debug in internal ITS)

Dear Sirs,
I get the error message below, when I try to run a IAC through internal ITS. The IAC worked for a while (<30 minutes), and then suddenly this error appeared.
I can see that this error message has been asked about previously, but then in connection with statefull/stateless BSP applications (e.g "Session timed out thread", on this forum May 31 2005).
In this thread the solution is apparently to alter the 'rdisp/plugin_auto_logout', is this the case for us as well?
I have read Error handling using the ICM , but not able to actually beeing able to pinpoint the problme.
All our other IAC are working it is only a problem with one of them. The problem is still valid even if I log on with different user, and the error is still there now even after two hours. The problem transaction is a altered version of the WSTA, and I am able to get the first screen where I enter the store number.
Any tips or suggestions to pinpoint the error?
+400 Session timed out - please log in again
Application Server Session timed out (-11)
Error:     -11
Version:     6040
Component:     ICM
Date/Time:     Thu Apr 27 14:13:56 2006
Module:     icxxthr_mt.c
Line:     1719
Server:     xxXXXt_TXX_XX
Detail:     Session does not exist+
In SM21 :
+Transaction Canceled ITS_P 025 ( 0x2103: Interpreter: The input contains errors. )
Documentation for system log message D01 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T200 message and the parameters.
Additional documentation for message ITS_P               025 Template interpretation terminated - internal error &1
No documentation exists for message IT025+
Best regards,
Jørgen

Dear Sirs,
The error has been solved. It was a matter of an illegal input sendt to the RetailHeaderFunction.
However, this makes way for another question.
On the standalone ITS, it was possible to get error messages which indicated where the code contained errors, when it was runned.
How is it possible to make the internal ITS gives better feedback (errors?), and show where the error is?
Jørgen

Internal ITS, ITS_ERRMSG_EXCEPTION SAPMSYST

Dear Sirs,
I am currently facing an issue with an IAC based on the standard WSTA (some modification to the IAC) program by SAP. It runs quite well, but it looks like out of a 500 user sessions I have got three similar short dumps.
The error message is,
Es wurde eine Fehlermeldung von WebAS empfangen. Fur das Grundbild der Fehlermeldung (Program: "SAPMSYST" Dynpro-Nummer: 40) wurde kein Template gefunden, der ITS service musste deshalb abgebroten worden. Beseitingen Sie nach Möglichkeit die FEhlerursache. Erst wenn die Feherursache beseitigt ist und damit die Fehlermeldun von Web nich mer gesendet wird, ist dieser ITS Service wieder lauffähig.
I know the answer generally is to active ~webdynpro 1 (it is currently 0). However as I understand it this will only make the error appear more sensible. I can not understand why it only happens 1/100 times, could it be something to do with scarce resources?.
Does anyone have any input on where to start looking for the error, what is the normal errors concealed by the error.
I am aware of note 859213 Integrated ITS, error messg on transaction selection screen, however if does not give an answer. We are on the recommended stack/patch level.
best regards,
Jørgen

Hello Klaus,
first of all I would like to thank you for the very good answers which you always seem to give.
As for the ~webdynpro it was a typo :=).
The service is migrated from standalone ITS to Internal ITS, and the same a dynpros is covered (same templates, same parameters). Would you think that is probable that this error has been exsisting at the standalone ITS as well, and have just been discovered now. Or is this something which may have been caused by the internal ITS migration.
Our big problem is that since the error is rare, even though if we set ~generatedynpro 1, if the long error appear on the end user side. It is unlikely we will be able to get the long solution? (as the users probably will forget to send it to us).Or will the long solution be available in some central log which we can read.
And just to double check, there are no downsides on setting the ~generatedynpro 1?. If it not, I guess best practice should be to set it on every IAC.
Best regards,
Jørgen Ruud

Internal ITS - service CATW not running

Hello Experts,
I want to migrate from external ITS to the internal on ERP2005. The internal ITS seems to work, at least service webgui looks ok.
What I need most is the CATW (timesheet) service. I have published it in SE80, in SICF I have added several parameters in the Gui-Configuration, now the service starts but what I get is not the "IAC-look" of CATW, but I get the transaction CATW which opens in the webgui. (looks exactly like in the gui when opening transaction CATW.
Any hints and tips for me?
I just want the Cats regular (ITS version) of the timesheet which uses the CATW service templates.
best regards,
JOhannes

Johannes,
Thank you for your quick reply. At first I tried looking for Aliases in SICF, and couldn't see any for sap/public/bc/its/mimes (although I don't know how to find an internal alias sorry) so I created an external alias sap/public/bc/its/mimes to point to default_host/sap/public/bc/icons which in SE80 Mime Repository looks as though it's where s_b_copy.gif is, but that still didn't let CATW find s_b_copy.gif so I went back to SE80, Internet Services, CATW. There I created s_b_copy.gif under CATW > Topic 99 > Mime Objects > ICONS which is where I find other .gif files which work, e.g. DELETELINE.GIF. I then changed template 1000APPCORE so that teh code for s_b_copy.gif looked like the code for magnify.gif which is:
<a href="#" onclick="javascript:OkCode1000('COPYTARGET')"><img src="`mimeURL(~service="CATW", ~theme="99", ~language="", "icons/s_b_copy.gif")`" border=0 alt="`COPYTARGET-TIP`"></a>
I published CATW again, and when I start the service, s_b_copy.gif still doesn't show, but when I look at it's properties it's the same as for magnify.gif which is <server>/sap/public/bc/its/mimes/CATW/99/icons/magnify.gif
I'm obviously misunderstanding something as I thought this would get the icon displayed. Any thoughts what I'm missing please ?
Thanks again,
James.

Unable to activate Internal ITS

Hi,
I recently installed WAS 640.
I tried activating the internal ITS, but somehow I am not able to do this correctly.
I have referred to all the SAP Notes I could find.
Also went through all the discussions in this forum.
Steps I have tried are:
1) SICF: Activated the Webgui and it00 services. Also activated its-->mime
2) Checked the parameters itsp/enable =1 and icm/server_port_0 is also correctly set.
3) I have published the Services "SYSTEM" and "WEBGUI" from SE80. Also Published ITS to site INTERNAL.
Could not find the service: SHUFFLER, hence sould not publish it in SE80. Is this required? How to resolve this issue?
When I test the webgui service from SICF, it opens the Web Browser, asks for User/Pass and then shows an Error Page which reads: ABORT_MESSAGE_STATE.
No System Dumps created at this time. SM21 shows Transaction Canceled ITS_P 001 ( ). One or two more entries were in German, and said something like: Path not correct(or not found) and one read: SAP Gui for HTML, service not found.
I don't remember correctly, maybe I can check that later and post here if required.
Can someone please help me with this?

I have done all the confiuguration that is available in all blogs, threads and guides for ITS on WAS 6.40.
But when trying to test the webgui service from SICF, I get the same error as mentioned in the first message in this thread.
I have checked the traces in dev_w0 and found the following:
M Sat Oct 27 14:46:53 2007
M        ***LOG W02=> & [itsphttp.cpp 1098]
W        *** ERROR => plugin: failed to parse header field path [itsphttp.cpp 591]
M        ***LOG W07=> & [itsphttp.cpp 592]
W        *** ERROR => plugin: parse named header fields failed, rc = 1 [itsphttp.cpp 241]
W        *** ERROR => plugin: ItspHttp_ParseHeader failed, rc = 1 [itsphttp.cpp 150]
W        *** ERROR => plugin: ItspHttp_HeaderFields failed. [itspagat.cpp 909]
W      *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 179]
W      *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp   674]
W    *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c    803]
M    ***LOG W03=> [itsplxx.c    804]
W    *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c    806]
W    *** ERROR => Raise Last error:[1 from: itspxx.cpp :675] [itsplxx.c    1008]
W    *** ERROR => RaiseError ITS_P:01 [itspxx.cpp   675]
Does nobody know of this?
Please help.
Shitij.

Migrating from standalone ITS to internal ITS u0096 copy existing templates

Dear Sirs,
I am in the process of migrating from Standalone ITS to the internal one. I have found several documents on the issue and the help section for the migration, http://help.sap.com/saphelp_nw04/helpdata/en/cd/8a424089ff2571e10000000a155106/content.htm
Currently I am using a standalone ITS server, 6.20 PL13, to access/run IAC components on ERP2004 server ZXY. In the new setup I wan to run the internal ITS on server ZXY instead.
I have however a question regarding the process. Step one in the process is to Copy the existing templates.
If I enter the transaction SE80, I am not able to see all of the IAC component names which are referenced in my portal iViews. I therefore assume that the ones which does not show up, has not been converted properly.
I therefore go into transaction SIAC1 to look for them there (as described in ITS New storage structures as of Web SAP AS 6.40, 678904), but I am however unable to find them there either.
Do I have to go the current ITS server and somehow copy the files/IAC manually (save on disk), and then upload then with SIAC_UPLOAD (from se38) onto the R/3 system. Or do they exist already on my R/3 system just that they arent shown?
Could a solution be that the name of the IAC component in the portal iview, differs from the name actually used in the R/3 system.
Any pointers or hints on this issue are appreciated.
Best regards,
Jørgen

Deepak Sharma,
Thank you for your reply. But I have already published the services internally and actually have used the 'webgui' service successfully. What I am trying to do now is to copy the custom services (there are only 2) to the integrated ITS from my standalone ITS server.

Questions on privacy and safari, browser history; top sites; private browsi

In one thread someone suggested that those concerned about the privacy of their web browsing and its history try Private Browsing. What are the consequences of Private Browsing? Does Private Browsing interfere with some of the web page features or javascript from working when I'm trying to access a page that has java or Flash? Will my bank's website load ok etc? I guess I was a little worried it would stop the showing of the last page visited and if so then hopefully that won't stop some sites from functioning.
Is Private Browsing the best way to go all around for those concerned about privacy loss in Safari or does it not really help much? I wonder why it isn't the default.
I want to be able to use my browser to access sites that don't load well when I use Firefox with NoScript, such as bank sites, but I do not want my browsing history to stay in view constantly, and I'm also upset at seeing it want to "learn" my browsing habits and try to suggest sites for me without my setting it to do this.
For this reason I will be setting Firefox or any other browser I feel is more private than Safari, possibly Camino, to be my default browser. I will probably only be using Safari when a site won't work without it, same as when I used to settle for Internet Explorer on my windows computer when Firefox didn't work.
I'm also concerned that I can't get that Google search bar out of my browser. I don't want Google keeping tabs of every site I visit. I'm not sure if Google has access to tracking every place I go if I never put any text into the Google search bar or how far into bed with Google Apple has now gone but I'm afraid of the privacy invasion possibilities.
Perhaps Google gets no info if I do not type anything into the google search bar. I wish I could drag it off the menu bar however. (If I want to go to google, I know how to type google.com for crying out loud).
I hope Apple will hold the line on its partners re: privacy in products like iPhone and Safari that work with its partners regardless of their tendencies to disrespect privacy.
Does anyone know if the fact that this Safari software wants to learn what my favorite sites are affects outside parties including Apple, Google, and/or others possibly getting access to info on my browsing habits?
If i allow the Top Sites page to work, will it just be something I MYSELF have access to the info on or are the URLs of my favorite sites reported to Apple, Google, or others?
Does hitting RESET clear things out in this regard? I'd like to use these tools if I could be sure that using Safari doesn't turn the computer into a spyware tool for outside entities, commercial interests and governmental interests to mine data from.

Barry Hemphill wrote:
Hello r:
If you think Safari, Firefox, or anything else will mask your browsing habits from someone who really wants to know, you are not being realistic.
I tend to discount justifications of privacy encroachments I sometimes encounter to the effect of "snooping is done by certain commercial and governmental parties as the way things 'just are', so shut up and don't worry". Customers who do not air their concerns and questions cannot have any expectation that the developer will be aware of their concern if they sit mute.
I sometimes pay for additional software to protect my privacy. I also use Firefox with Noscript and adblocking third party software rather than just sit with what the big corporations leave me with; there is a third party program for Safari I tried called PithHelmet for example, but then it seemed to not be loaded with the new Safari update and its developer dud not provide me any communication (although I got help here on how to find the program so I could remove it); so I may not use Safari as much compared to whatever browser I find has better privacy and security measures.
If you go to the Safari help menu and enter +"private browsing,"+ you will find a complete description of what that function does for you. In answer to one of your questions, it is not a default because one loses a good deal of functionality. I would be most perturbed if that was made the default.
Ok, I will try to learn the functionalities lost, thanks.
You can set the history to be deleted after one day (or longer). If you are concerned, it is quite easy to clear history before you sign off.<</div>
I've been using RESET to clear my history in the past; I assume it still works although Reset doesn't seem to permanently make certain cookies with future expiration dates go away permanently, which I find come back later even without my visiting a site for weeks and this was happening in the previous version of Safari too.
You can remove the Google search box (or anything else) from the menu bar. Right click on it. One option is +"remove item."+
That doesn't work in terms of just removing the Google search bar at the top right, I see.
I did not want to lose my blank for typing a URL; I only want the thing out to the right that says Google on it, which seems to use Google's search engine to go away. I certainly hope that every time I type a URL into the blank at the left top (which is not the part over to the top right that says Google and a magnifying glass) that I'm not having Google track my URLs I visit like they would if I put a search term into the blank at the top right, but maybe it does since the two are forcibly linked.
I guess I'd have to try Command L - Open Location in the Find menu if I want to try to go to a URL without using the URL blank at the top left I normally type in. I would only want to go to that trouble if typing in the top left blank for URLs results in Google tracking my URL visits like they certainly would if I typed in the top right google tool bar and hopefully Open Location does not result in the same issue.
if i allow the Top Sites page to work, will it just be something I MYSELF have access to the info on or are the URLs of my favorite sites reported to Apple, Google, or others?
I seriously doubt that Apple (or anyone else) is "reporting" anything about you to anyone. As you are no doubt aware, most web sites store cookies on your system when you visit that site. The information stored varies, but you can, of course, block cookies if you wish.
I have the ability to block cookies, and I use Noscript a lot too with Firefox (although that set up does not always work with a few webpages here and there, so sometimes I have to use Safari or Camino). I use Safari less and less because there is no Noscript type of third party software for it. The only time I feel I have no choice but to use Safari on my Mac is when I go to my Mobileme account.
My concern is of Top Sites "learning" my favorite sites and displaying to me the names of a lot of suggested URLs, as to who else is receiving that data; hopefully no one. Maybe I'll get to where i find info explaining that Apple and Google aren't collecting data about my "top sites" if I use that feature.
It's just that there has been an increasing amount of privacy intrusion in the commercial realm combined with a corporate arrogance in terms treating consumers as though there is no need to make any assurances or explanations to consumers to help them trust the privacy. Instead we get browbeaten by various parties about how stupid or obvious we are if we ask a question to remind the corporation it's an issue to those of us who want to feel comfortable with the privacy of the software we use.
I'll try to use the Feedback form to ask as well.
At the risk of stating the obvious, it is quite easy to find out all sorts of information about an individual if one is interested. If you are really concerned, I suggest you severely limit your use of the Internet.
I may well limit my use of the internet if what you say is true that there is no way to do any reading on the internet without being spied on by commercial and governmental interests.
thanks

Windows 7 64 bit USB external hard drives lose its connection and stops working.

This is a very serious error for users of WIN 7 64 bit only.
I have read hundreds of posts about this problem an not a word about it from MS.
We have tested this problem on four different computers and three different external hard drives using Win 7 Ultimate.
Even tried the RTM version.
If you connect "Any brand" external USB hard drive to "Any brand of computer" using Win 7 (64 bit only) and try to copy a large file like a movie from the internal drive to the external USB drive it loses the connection to the USB.
We even reverted back to Vista 64 bit on two computers for testing but Vista 64 works fine.
This occurs on all computers with different USB drives.
We have tried all the suggestions posted and none work.
It seems from all the posts that other USB devices are also having similar problems with the 64 bit.
Below is a more about this problem.
http://windows7tipsonline.com/USB_Problem.htm
If anyone knows how to resolve this please post a reply here.
Thanks

The link only refers to USB problems with nVidia chips, so it's not a universal problem. I have Win 7 x64 RTM installed and I just transfered 2 4GB DVD files and 1 18GB backup file from my internal SATA drive to my external USB drive
with no problems - no time-out!
<text>Since nVidia chipsets seem to be the culprit, nVidia and the motherboard manufacturers need to be told about the problem so that nVidia can correct the problem and not
Microsoft. If it's a nVidia chipset driver/software problem,
Microsoft is not going to fix anything since it's not a universal problem.</text>
I think this answer is a smoke screen, here's why. The issue of a USB HDD losing its connection AND not being recognized on a booting Win 7 x64 in any of its incarnations is a Microsoft issue, not nVidia. I have three PCs (actually 4 but one is in storage so
doesn't count) to see firsthand what happens with this issue. One, is a maxed out Toshiba with Windows Pro x64. Every now and then, it asks to format any number of my USB drives. I have Seagates, Iomegas, Western Digitals, and an OLD Maxtor. The Toshiba OS
will from time to time claim the Iomega and WD drives need formatting or have a wrong parameter etc. It doesn't do this with the Seagates or Maxtor. does the Tosh have nVidia chipsets? Yes. OK, now I attach these dives to my Dell Inspiron run by Windows Vista
Home Basic and intel Graphic Chip. The HDDs fire up right away. OK, I stick them into the ASUS G75VW-RS72, a DTR notebook on Windows 7 Ultimate x64. The machine has nVidia chipsets. Sometimes the HDDs fire up right away (Maxtor is never a problem), sometimes
they don't. What do I do? Unplug, replug-sometimes works sometimes not. Turn off the computer, turn it back on-sometimes works sometimes not. Unplug and put into another USB port-sometimes works sometimes not. Unplug and leave unplugged for anywhere
from 10 seconds to half an hour-sometimes works sometimes not. Switched to different external enlosure or the same or different brand-sometimes works sometimes not. Remove the HDD and put into a NetStar portable dock with its own power supply(http://www.vantecusa.com/en/product/view_detail/295).
Result? The computers NEVER, not EVER, even ONCE demonstrated an issue with the drive. Other times, I remove the HDD and employ a converter (http://www.sabrent.com/category/hard-drive-enclosures/USB-DSC5/). Result? The computers NEVER, not EVER, even ONCE
demonstrated an issue with the drive. So I think the evidence suggests Windows is finicky and Microsoft is passing the buck on this.

Unable to connect and the browser won't open

Hi My brother and I switched our phone for a while but when I got my phone back, the Browser won't open anymore. I tried to connect through other browser (Opera mini and UC browser) but its still the same. What am I gonna do? My father will not gonna buy me another phone if I my previous phone (Blackberry 8520), which is given by him also, have problems already. Please. I really need your expertise on this. Thank you and God Bless
P.S: Yes, I do speak english but not that fluent. So I am very sorry for those grammatical errors

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you may have to WIPE your device and start over. To prepare, you'll want to have a full backup...refer to the link in my autosig for instructions.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ESS with Internal ITS

We are using ESS 50.4 on ECC6 with internal ITS. It is working well except for a mouseover message when the user places the mouse over a pushbutton in the applications for Address, Personal Information, Bank Information, and Family/Related persons.
The mouseover message says 'Pushbutton deactivated' even though the pushbutton has not been deactivated.
Can this be fixed via the portal or through ICF or in SE80?
Thanks for any suggestions,
D. Maupin

Donna,
Those parameters look about right for the WEBGUI service, but not so much for the ESS services you mentioned.
I just had a look at one of the few remaining ITS based ESS services we still use (PZ03 Bank) and the parameters we have set in SE80 and SICF look like this:
~AUTOSCROLL      0
~GENERATEDYNPRO      1
~LANGUAGE
~LISTSCROLLING      0
~LOGIN
~PASSWORD
~POPUPS      1
~STYLE      DHTML
~TRANSACTION     PZ03
~WEBTRANSACTIONTYPE EWT
The mouseover messages seem to work fine for us with those parameters, maybe try setting one of yours the same way and see if that helps.
regards,
John

Firefox and Safari browser not displaying images and text properly

Hello,
I am new to the support/discussion forum and previously ran Windows on my Macbook OS X 10.5.8. I switched over to the Mac OS X and am finding that the Safari and Firefox browser shows much images/text as 'squished' or not aligned properly. I suppose this is due to development and the cross browser formats are not compatible.
However, I would like to ask if there is some display error in the system preferences or perhaps even some coding I'm not looking at to correct or fix the appearance.
Can anyone please help me out? I appreciate it:)

You are not using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Then, if you have a look near the bottom of SpryMenuBarVertical.css you will see that the white background colour has been specified for IE as in
@media screen, projection
    ul.MenuBarVertical li.MenuBarItemIE
    display: inline;
    f\loat: left;
    background: #FFF;
Change the value to #CCC and it will have fixed that part of the problem.
When you upgrade to the later version of Spry, make sure to keep a copy of the CSS file as a reference to modifying the new CSS file.
Gramps

Log file (access.log) of the internal ITS

Hello,
anybody know how to access the logfiles of the internal ITS. In particularly im looking for the log file access.log which you had for the external ITS accessable over the ITS admin page http://<servername>/scripts/wgate/admin/!
The log file loged all users and the transaction they accessed over the time in the format
2006/10/21 18:39:16.093, 0 #197349: IP ???.???.???.???, -its_ping
Thanks in advance,
Kai Mattern

hi
good
go through these links, i hope these ll help you to solve your problem.
http://www.hp.com/hpbooks/prentice/chapters/0130280844.pdf
http://help.sap.com/saphelp_46c/helpdata/en/5d/ca5237943a1e64e10000009b38f8cf/content.htm
thanks
mrutyun^

Internal ITS, IAC and PocketPC Browser

Similar Messages

Maybe you are looking for