Internal lock version management : Unable to copy objects

Hi ALL
We need help with this particular problem we are facing with our ID objects....
I am unable to copy my communication channels which i was able to do it earlier without any problem...just to make it easy while developing new object...we used to make a copy and edit...instead of creating new scratch.
However, now we are facing a problem once we try activating any copied object, here is the error message we are getting...
"Version management was unable to execute the last action because a temporary internal lock has been set. Repeat the action "
This is not a user lock....we checked that, please do let us know how we can fix this ...so that we may be able to copy and activate copied object without the above error.
Your help is greatly appreciated!!
Thank you,
Partrick

Hi
Its Weird but it can happen if you copy object whose previous version is still not activated. I still think you must check with all the change lists. or bring all to PISUPER and activate them.
Oops then i think it got locked for all. Refresh the cache and even soft restart for J2EE.
I think you copy a lot
Thanks
Gaurav
Edited by: Gaurav Bhargava on Dec 17, 2008 1:38 AM

Similar Messages

Version management in Essbase

Hi all - We're looking to do version management with our Essbase objects (outlines, calc scripts, etc) as part of an ITIL implementation. Has anyone had any luck or experience in such an attempt with Essbase in a UNIX environment? The corporate standard will most likely be PVCS (now owned by Serena). Many thanks, charlie 

FYI, we were able to get EAL up and running after adding the following entries into the registry on our servers...
Solution
This timeout issue can be fixed by adding two tcpip registry parameters, but first you must identify which client was communicating with essbase when the timeout occurred so that you know which machine to add the parameters to. If all the EAL and EPM components are installed on a single machine, then that machine would also host the client. If products are installed in a distributed environment you determine the client machine based on how the EAL Essbase Server component is defined.
The APS URL is part of the Analytics Link, Essbase Server definition in EAL.
If the value (APS URL) is "Embedded" this means that the EAL Application Server is communicating via the JAPI directly with the Essbase Server. In this case the EAL AppServer is the client to the Essbase Server. For this case the following tcpip registry parameters need to go on the machine where the EAL Application Server is running.
If the (APS URL) value is http://serverName:13080/aps/JAPI then the EAL Application Server is communicating by way of Hyperion Provider Services (APS). In this case EAL proxies requests to and from the Essbase Server through APS. This means that APS is the client to the Essbase Server and the tcpip registry parameters need to go on the machine where Hyperion Provider Services are running.
Once you have identified which machine is acting as the client to essbase, set the TcpTimedWaitDelay=30 and MaxUserPort=65534 parameters via the windows registry.
1. Open the Windows Registry.
2. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.
3. Add new DWORD Value named "TcpTimedWaitDelay"
- right click and select Modify
- Select "decimal" radio button, type in 30.
4. Add new DWORD Value named MaxUserPort
- right click and select Modify
- Select "decimal" radio button, type in 65534
5. A reboot of the server is necessary.

It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone.

Version management of design objects in XI, rollBack

hi experts,
Is there a way of managing version control of design object in XI,
i mean to say, can i have the the different(history) versions of design objects,
and is there any possibility to roll back a design object to a previous version,

i mean to say, can i have the the different(history) versions of design objects,
and is there any possibility to roll back a design object to a previous version, 
>>>
goto the history tab of the object. Double click the version that you need, copy it and activate the same to achieve the roll back feature

Version Management for BAPI Object

Hi all,
could someone tell me how to see version changes for BAPI Object type. Something like version comparison in Version Management.
Regards,
Joseph
Message was edited by: Joseph Reddy Yeruva

Hi Joseph,
As i said to to see the table which has all the required information , do check it once again ....
As sudhir said also u get the information
GOTO SWO1-->enter the Object type --> click --> display
Then click header in the tool bar (Hat symbol) then clik change data ... u will see the information ... and this is also available in table TOJTB...
Regards
Sridhar reddy k

Data can be copied to a locked version.

Hi,
We are using BCS for Consolidation. We have noticed that it is possible to copy data into a locked version, which poses serious data integrity issues.
Example: We use version 200 for actuals, and version S05 for Forecast. Actuals data from version 200 is copied to version S05 for Forecast.
In the event of a user typo, it is possible that data from S05 could be overwritten to version 200, thereby destroying all the consolidation data in the actuals version 200 for the selected periods.
Has anyone else faced this issue, or has suggestions for what to do.
Thanks.

Hi Payal,
1) One way to reduce the "damage due to typo or similar condition" is.....throw a confirmation
    window asking user to positively confirm the change.
2) Philosophically speaking......no matter how many precautions we take.....human error is
    always there.....
3) If you take a) reasonable precautions   b) regular backups....you will
    be able to recover with minimal damage.
I apologize if I sounded a little pedagogic.....
Good luck, BB

Version Management of ABAP objects in Workbench

Dear Friends,
Can any one give idea about document, blog or link, which gives brief explanation about "Version Management of ABAP objects in workbench" with screen dispaly?
Regards,
Nilay

Hello,
Please see these: [https://websmp101.sap-ag.de/slm], [/people/manish.agarwal4/blog/2007/04/04/sap-centric-enterprise-architecture--part-3--software-lifecycle-manager] and [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fbec764c-0601-0010-c7a4-cbb73e7fe2eb].
Regards.

Version management in BOR object

Hi Gurus,
I have a custom BOR object and i am checking it from SWO1 transaction.But i am not able to do version management for the Z BOR object.Kindly provide the way to do the same.
Thanks and Regards
Sudipto Sinha

Go to se 38, put this object there , in the same screen click on utilities -> version -> generate version.

BI 4.1 Version Management - Change copy of version name

Dear Experts
I wondered if there is a possibility to change the "get copy of version" name of a Web Intelligence report.
When there is the need of changing a report I make the changes and I click on "Checkin" to ensure that the latest version of the cms is under version control. Now often the newest report is not the report currently used by the customer because the newest version has not been tested yet for example.
Therefore it is necessary sometimes to promote an old version of this specific report. I then click on history and choose the desired revision number and finally click on "Get copy of version". This action provides a report out of version control which can then be promoted accross the systems. The problem now is that the filename ends with a string containing something like "<reportname>(Copy of Version 2 @ 2014/06/11 11:41:24)".
Is it possible to change this string which is beeing automatically added to the filename? For example to "<reportname>_<revisionnumber>". Or even better: Are there any other ideas to handle the version management in interaction with promotion management?
Thank you
Lars

At this time you cannot change the name automatically. You can suggest an idea in idea place.

Latest OVI Suite Version - Unable to Copy Music, P...

I have a Nokia n900 with the latest MAEMO 5 software on it.
For some reason with the latest OVI Suite update I'm unable to copy Music, Pictures and Videos even the playlists that i make. I did a DROP/DRAG option and also right click and COPY TO DEVICE option. Odd thing though when i do choose the MASS STORAGE options and take a look at .audio folder there is one file that was copied ONLY but its corrupt.
Just tried the BLUETOOTH connection instead since this wasn't there with prev version of the OVI Suite and then copying those media files and it works but it's a pain since i copy around 2GB of files and takes awhile...
Whats wrong with the USB transfer capabilities on the latest OVI Suite?
BTW already downloaded a fresh copy of the OVI suite and reinstalled and still the same issue. Also got a brand new cable and still the same.

@noside143
Sorry for the delay in answering but can only say no issues with OVI Suite v.3.1.1.80 on Xp SP3 device copying music from N900 on Global PR1.2 unfortunately:
Happy to have helped forum with a Support Ratio = 42.5

Internal Data Transfer to Funds Management - Version Management Error

Hi All,
We are trying to convert the open PO's in our system that were created before FM was implemented, and that are to be converted now before the MIGO stage.
We are using the following steps:
1) Select the document
2) Convert the worklist.
We had done the first step, and faced no issues. During the conversion of the worklist, we face the following error
Message ID - MEPO;Message Number - 813; Version Management of purchase order still faulty.
Message ID - MEDCM; Message Number - 4; Enter short text for version
Message ID - MEDCM; Message Number - 3; Enter reason for change for version
In the Control Data for each of the Document Type, the control data, Version Active and Version 0 OK are activated.
Can someone kindly suggest what could have possibly gone wrong here ?
Regards,
Wy

Hi All,
Just to clarify, I went through note 800784 and found that in our system
1. None of the fields - 'Reason,' 'Description,' 'Req By,' 'Req By Ext' or 'Post Date' - is a required entry in the version management field selection
2. None of the fields - EKPO-ELIKZ or EKPO-EREKZ or EBAKZ - are set as Version-Relevant Fields of Purchase Requisitions.
Cant figure out why I am not able to assign the fund centre and commitment item here, although I am able to perform MIGO and MIRO on that.
Regards,
Wy

Unable to copy file D018 error on pre-install

Hi,
We're on NW6.5 SP5 with ZFD4.01 IR6. We tried to rollout a series of
lights-out pre-install apps to workstations (NT 4.0 SP6b) on Friday and had
98 out of 262 workstations fail with the following error:
"Unable to copy file [\\unc path\939.fil] [D018]"
Workstations do have RF rights to the unc path where the nal files are
stored (via rights to the container hosting the workstations), and the macro
Source_Path is right, all the usual troubleshooting 'D018' checks are ok.
I've checked the AXT file and the Directory Create command comes before the
File Copy. Weirdly, only some of the workstations failed, and all on the
same file, which goes to c:\program files\blah\blah\blah and is called
_alphapm.exe.
To ensure this ran out ok we temporarily lowered the workstation refresh
frequency to 1 min, and the nal ran to all machines in about 6 minutes.
What could be the cause of only some of the machines failing, and all on the
same file?
Thanks,
Steve Law

Hi,
I've been troubleshooting this issue and now have Zenworks debug logs, which
I've managed to capture for both a machine that succesfully installed a
pre-install nal and one that failed for the same urn of the same nal. I'm
hoping someone can explain what might be happening. Here's the crucial
portion of the failed nal from zapplib.log:
This failed:
01/12/07 16:40:06.805 -- NWAPPSAGetObjectAttributes took 18 milliseconds for
OURCO_TREE
Number of Attributes: 1
1st attribute Name: App:Program Groups
DS Object Name: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
Attribute list is Not NULL
01/12/07 16:40:06.805 -- This is an AOT delivered app
01/12/07 16:40:06.805 -- Start: ProcessFiles
01/12/07 16:40:06.835 -- NWAPPSAGetObjectAttributes took 18 milliseconds for
OURCO_TREE
Number of Attributes: 1
1st attribute Name: App:Copy Files
DS Object Name: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
Attribute list is Not NULL
FileSettings: CreateRollbackFile szTempPath is C:\TEMP
FileSettings: CreateRollbackFile szRollbackFileName is
C:\TEMP\NAL6a42\NAL2.tmp
01/12/07 16:40:17.0 -- nwappCopyFileEx: Entering.
01/12/07 16:40:17.0 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil".
01/12/07 16:40:17.0 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL".
01/12/07 16:40:17.0 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:17.70 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:17.70 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:33.604 -- GetFileVitals: FindFirstFile Failed to find any
file matching \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:33.604 -- Exiting GetFileVitals 53
01/12/07 16:40:33.604 -- Exiting nwappCopyFileEx with 53
01/12/07 16:40:35.536 -- Stop: ProcessFiles
01/12/07 16:40:35.556 -- NWAPPSAGetObjectAttributes took 19 milliseconds for
OURCO_TREE
Number of Attributes: 9
1st attribute Name: App:Flags
DS Object Name: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
Attribute list is Not NULL
The log for the successful workstation is below. As per previous posts I
checked that the same Windows file and folder rights exist on both the
workstations, and the existing file that was to be overwritten
(C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL) was not set to read-only.
The "FindFirstFile Failed to find any file matching blah blah blah" message
suggests that the problem is related more to accessing the source file on
the server (4.fil) than in writing it to the workstation.
This was a test to 10 machines, the report shows that, chronologically, 2
workstations installed it fine and then the ensuing 8 failed. I can't think
of anything that would lock the 4.fil file - as these are reads they
shouldn't actually lock the file anyway. We run McAfee Netshield 4.63, but
it's set to scan inbound files, not outbound reads.
Any suggestions as to why it was able to read the file for one workstation
and not on another? I have had greater success when I've activated "spread
from start time" over a 15 minute period, but still had one failure out of
ten. A tool that logged all file locks would be useful but I can't find
anything.
Thanks,
Steve Law
Zapplib.log of succesful workstation:
01/12/07 16:40:01.232 -- NWAPPCheckSchedule: PREINSTALL: Found app that has
preinstall set Lamda 5101401 PatchV2 lightsout test
#2.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.232 -- NWAPPCheckSchedule: PREINSTALL: Found app that has
preinstall set Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule: PREINSTALL: App has not been
pre installed Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule: PREINSTALL: App has not been
pre installed and it has a schedule Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule: PREINSTALL: App has not been
pre installed has schedule trying it now Lamda 5101401 PatchV2 Lightsout
test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- FORCERUN: Adding Item to force run list
01/12/07 16:40:01.242 -- Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.242 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.272 -- STAGG: Found the GUID/version for WMI Agent
Downloader.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.272 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.272 -- STAGG: t has NOT been run during this session, run
it. app: Lamda Point at Production Server Auto
#1009.Lamdatest.AutoLoad.GENERAL.NAL.BHO.UK.SUNLIF E
01/12/07 16:40:01.272 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.282 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.282 -- STAGG: t has NOT been run during this session, run
it. app: Lamda idate reg key report.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.282 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.312 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.312 -- STAGG: t has NOT been run during this session, run
it. app: Lamda idate reg key report0.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.312 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.342 -- STAGG: Found the GUID/version for Viruscan8 epo
fix.Maintenance Fixes.BHO.UK.SUNLIFE
01/12/07 16:40:01.342 -- NWAPPCheckSchedule FORCERUN: we're in ws space and
the APP_USER_FORCE_RUN_WS_ASSOC flag is unset
01/12/07 16:40:01.372 -- NWAPPCheckForScheduledApps::Pre-install::Lamda
5101401 PatchV2 Lightsout test #3.Workstations.BHO.UK.SUNLIFE tree
OURCO_TREE
01/12/07 16:40:01.372 -- TreeName: OURCO_TREE
01/12/07 16:40:01.372 -- UserName: LAMTEST02
00:D0:B7:14:27:61.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.372 -- ConnType: 2
01/12/07 16:40:01.372 -- Entering RunApplication: Lamda 5101401 PatchV2
Lightsout test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.392 -- RegWriteGUIDEntry: No Version to write
01/12/07 16:40:01.392 -- pa.hContext structure
01/12/07 16:40:01.392 -- TreeName: OURCO_TREE
01/12/07 16:40:01.392 -- UserName: LAMTEST02
00:D0:B7:14:27:61.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:01.392 -- ConnType: 2
01/12/07 16:40:01.403 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:01.403 -- appLaunchApplicationWrapper::Enter
01/12/07 16:40:01.403 -- AUTHENTICATION DLL: Start
01/12/07 16:40:01.403 -- AUTHENTICATION DLL: szThirdPartyDLL =
01/12/07 16:40:01.403 -- AUTHENTICATION DLL: End
01/12/07 16:40:01.413 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:01.473 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:01.503 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:01.513 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:01.573 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:01.583 -- Calling NWAPPSACacheApplications for:
01/12/07 16:40:01.583 -- Calling NWAPPSACacheApplications for:
01/12/07 16:40:01.583 -- nwappsacacheapp: Creating new filstore
01/12/07 16:40:01.583 -- nwappsacacheapp: Creating new appcache
01/12/07 16:40:01.583 -- nwappsacacheapp: Calling importfrom ds
01/12/07 16:40:01.663 -- NWAPPNetGetObjectAttributes took 51 milliseconds
for OURCO_TREE
01/12/07 16:40:02.184 -- Import from DS was successful
01/12/07 16:40:02.194 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:02.204 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:02.204 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:02.204 -- Calling NWAPPSAAddFolderToApp for:
01/12/07 16:40:02.204 -- NWAPPSetRegValAsService: Skip Service since service
is dead or I'm the WS: CreateFile: 183
01/12/07 16:40:02.204 -- NWAPPSetRegValAsService: Skip Service since service
is dead or I'm the WS: CreateFile: 183
01/12/07 16:40:02.214 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:02.224 -- NWAPPNetGetObjectAttributes took 7 milliseconds for
OURCO_TREE
01/12/07 16:40:02.254 -- NWAPPSAGetObjectAttributes took 28 milliseconds for
OURCO_TREE
01/12/07 16:40:02.734 -- Exiting NWAPPSACacheApplication
01/12/07 16:40:02.774 -- NWAPPSAGetObjectAttributes took 28 milliseconds for
OURCO_TREE
01/12/07 16:40:02.784 -- LaunchApp: Lamda 5101401 PatchV2 Lightsout test
#3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:02.784 -- Leaving NALContext Constructor
01/12/07 16:40:02.825 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.835 -- RunThirdPartyScript::Enter
01/12/07 16:40:02.865 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:02.895 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.925 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.925 -- RunThirdParyScript::Exit
01/12/07 16:40:02.925 -- NWAPPDistributeAppPA: Entering. App = Lamda
5101401 PatchV2 Lightsout test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:02.955 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:02.955 -- This is an AOT distributed application
01/12/07 16:40:02.965 -- NWAPPNetGetObjectAttributes took 2 milliseconds for
OURCO_TREE
01/12/07 16:40:02.965 -- Done checking if we should distribute
01/12/07 16:40:02.965 -- Should we prompt before distributing?
01/12/07 16:40:02.965 -- Should we prompt for macros?
01/12/07 16:40:02.995 -- NWAPPSAGetObjectAttributes took 30 milliseconds for
OURCO_TREE
01/12/07 16:40:02.995 -- NWAPPPreDistributionProcess Pre Distribution Script
processing.
01/12/07 16:40:03.5 -- RunThirdPartyScript::Enter
01/12/07 16:40:03.35 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.65 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.65 -- RunThirdParyScript::Exit
01/12/07 16:40:03.95 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.125 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.145 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.175 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.205 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.205 -- This is an AOT delivered app
01/12/07 16:40:03.205 -- Start: ProcessFiles
01/12/07 16:40:03.255 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:03.516 -- nwappCopyFileEx: Entering.
01/12/07 16:40:03.516 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil".
01/12/07 16:40:03.516 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL".
01/12/07 16:40:03.516 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:03.576 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:03.576 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:05.849 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil
01/12/07 16:40:05.849 -- Exiting GetFileVitals 0
01/12/07 16:40:05.849 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL
01/12/07 16:40:05.849 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL
01/12/07 16:40:05.849 -- Exiting GetFileVitals 0
01/12/07 16:40:06.239 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\4.fil to
C:\Lamda5\Dlls\CLIENTSTATEMENTS.DLL
01/12/07 16:40:06.540 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:06.550 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:06.550 -- nwappCopyFileEx: Entering.
01/12/07 16:40:06.550 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil".
01/12/07 16:40:06.550 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OL D".
01/12/07 16:40:06.550 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:06.550 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:06.550 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil
01/12/07 16:40:06.550 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil
01/12/07 16:40:06.560 -- Exiting GetFileVitals 0
01/12/07 16:40:06.560 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OLD
01/12/07 16:40:06.560 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OLD
01/12/07 16:40:06.560 -- Exiting GetFileVitals 0
01/12/07 16:40:06.920 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5.fil to
C:\Lamda5\Dlls\CLIENTSTATEMENTS_5101401Z03.OLD
01/12/07 16:40:07.371 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:07.371 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:07.371 -- nwappCopyFileEx: Entering.
01/12/07 16:40:07.371 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil".
01/12/07 16:40:07.371 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CREATEFPDLETTER.DLL".
01/12/07 16:40:07.371 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:07.401 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:07.401 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil
01/12/07 16:40:07.401 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil
01/12/07 16:40:07.401 -- Exiting GetFileVitals 0
01/12/07 16:40:07.401 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CREATEFPDLETTER.DLL
01/12/07 16:40:07.411 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CREATEFPDLETTER.DLL
01/12/07 16:40:07.411 -- Exiting GetFileVitals 0
01/12/07 16:40:07.651 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\6.fil to
C:\Lamda5\Dlls\CREATEFPDLETTER.DLL
01/12/07 16:40:07.782 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:07.782 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:07.792 -- nwappCopyFileEx: Entering.
01/12/07 16:40:07.792 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil".
01/12/07 16:40:07.792 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD ".
01/12/07 16:40:07.792 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:07.792 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:07.792 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil
01/12/07 16:40:07.792 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil
01/12/07 16:40:07.792 -- Exiting GetFileVitals 0
01/12/07 16:40:07.792 -- Starting GetFileVitals for
C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD
01/12/07 16:40:07.802 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD
01/12/07 16:40:07.802 -- Exiting GetFileVitals 0
01/12/07 16:40:08.383 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\7.fil to
C:\Lamda5\Dlls\CREATEFPDLETTER_5101401Z03.OLD
01/12/07 16:40:08.513 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:08.523 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:08.523 -- nwappCopyFileEx: Entering.
01/12/07 16:40:08.523 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil".
01/12/07 16:40:08.523 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL".
01/12/07 16:40:08.523 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:08.553 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:08.553 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil
01/12/07 16:40:08.553 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil
01/12/07 16:40:08.553 -- Exiting GetFileVitals 0
01/12/07 16:40:08.553 -- Starting GetFileVitals for
C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL
01/12/07 16:40:08.553 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL
01/12/07 16:40:08.553 -- Exiting GetFileVitals 0
01/12/07 16:40:08.753 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\8.fil to
C:\Lamda5\Dlls\EXITSREQSETTPAY.DLL
01/12/07 16:40:08.873 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:08.873 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:08.873 -- nwappCopyFileEx: Entering.
01/12/07 16:40:08.873 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil".
01/12/07 16:40:08.873 -- nwappCopyFileEx: targetFile =
"C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD ".
01/12/07 16:40:08.873 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:08.873 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:08.873 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil
01/12/07 16:40:08.883 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil
01/12/07 16:40:08.883 -- Exiting GetFileVitals 0
01/12/07 16:40:08.883 -- Starting GetFileVitals for
C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD
01/12/07 16:40:08.883 -- GetFileVitals: FindFirstFile found a file that
matched: C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD
01/12/07 16:40:08.883 -- Exiting GetFileVitals 0
01/12/07 16:40:09.264 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\9.fil to
C:\Lamda5\Dlls\EXITSREQSETTPAY_5101401Z02.OLD
01/12/07 16:40:09.424 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:09.424 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:09.424 -- nwappCopyFileEx: Entering.
01/12/07 16:40:09.424 -- nwappCopyFileEx: sourceFile =
"\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5101401PatchV2.cmd".
01/12/07 16:40:09.424 -- nwappCopyFileEx: targetFile =
"c:\lamda5\5101401PatchV2.cmd".
01/12/07 16:40:09.424 -- nwappCopyFileEx: targetFile drive type = 3
01/12/07 16:40:09.424 -- nwappCopyFileEx: Calling GetFileVitals or
GetWebFileVitals
01/12/07 16:40:09.424 -- Starting GetFileVitals for
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- GetFileVitals: FindFirstFile found a file that
matched: \\Server1\APPS\Public\Template\Lamda 5101401
PatchV2-3\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- Exiting GetFileVitals 0
01/12/07 16:40:09.434 -- Starting GetFileVitals for
c:\lamda5\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- GetFileVitals: FindFirstFile found a file that
matched: c:\lamda5\5101401PatchV2.cmd
01/12/07 16:40:09.434 -- Exiting GetFileVitals 0
01/12/07 16:40:09.504 -- ZLIBCopyFile::BEGIN copying
\\Server1\APPS\Public\Template\Lamda 5101401 PatchV2-3\5101401PatchV2.cmd to
c:\lamda5\5101401PatchV2.cmd
01/12/07 16:40:09.574 -- ZLIBCopyFile::END (returning 0)
01/12/07 16:40:09.574 -- Exiting nwappCopyFileEx with 0
01/12/07 16:40:09.584 -- Stop: ProcessFiles
01/12/07 16:40:09.584 -- Start: ProcessTextFiles
01/12/07 16:40:09.614 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:09.624 -- Start: ProcessRegSettings
01/12/07 16:40:09.664 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.305 -- Start: ProcessINISettings
01/12/07 16:40:10.335 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.335 -- Start: ProcessGroupLnkSettings
01/12/07 16:40:10.375 -- NWAPPSAGetObjectAttributes took 43 milliseconds for
OURCO_TREE
01/12/07 16:40:10.385 -- RunThirdPartyScript::Enter
01/12/07 16:40:10.415 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:10.446 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.446 -- RunThirdParyScript::Exit
01/12/07 16:40:10.546 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:10.566 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.576 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.586 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.586 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.596 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.606 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.606 -- NWAPPNetGetObjectAttributes took 2 milliseconds for
OURCO_TREE
01/12/07 16:40:10.616 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.626 -- NWAPPNetGetObjectAttributes took 2 milliseconds for
OURCO_TREE
01/12/07 16:40:10.626 -- NWAPPNetGetObjectAttributes took 5 milliseconds for
OURCO_TREE
01/12/07 16:40:10.636 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.646 -- NWAPPNetGetObjectAttributes took 3 milliseconds for
OURCO_TREE
01/12/07 16:40:10.656 -- NWAPPNetGetObjectAttributes took 4 milliseconds for
OURCO_TREE
01/12/07 16:40:10.876 -- NWAPPNetGetObjectAttributes took 5 milliseconds for
OURCO_TREE
01/12/07 16:40:13.79 -- Write Machine GUID Entry
01/12/07 16:40:13.79 -- RegWriteGUIDEntry: No Version to write
01/12/07 16:40:13.79 -- Close stream list
01/12/07 16:40:13.79 -- Deleted szTreeName
01/12/07 16:40:13.79 -- After Calling NWAPPDistributeAppPA
01/12/07 16:40:13.79 -- Calling GetRegPromptedMacros()
01/12/07 16:40:13.79 -- Calling DistrbiuteAppAlwaysEx
01/12/07 16:40:13.89 -- NWAPPDistributeAppAlwaysPA: Entering. App = Lamda
5101401 PatchV2 Lightsout test #3.Workstations.BHO.UK.SUNLIFE
01/12/07 16:40:13.129 -- NWAPPSAGetObjectAttributes took 44 milliseconds for
OURCO_TREE
01/12/07 16:40:13.159 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:13.189 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.219 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.240 -- NWAPPSAGetObjectAttributes took 25 milliseconds for
OURCO_TREE
01/12/07 16:40:13.250 -- No content found in any Dist Always streams -
exiting
01/12/07 16:40:13.250 -- RegWriteGUIDEntry: No Version to write
01/12/07 16:40:13.280 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.280 -- RunThirdPartyScript::Enter
01/12/07 16:40:13.310 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.340 -- NWAPPSAGetObjectAttributes took 27 milliseconds for
OURCO_TREE
01/12/07 16:40:13.380 -- NWAPPSAGetObjectAttributes took 26 milliseconds for
OURCO_TREE
01/12/07 16:40:13.380 -- RunThirdParyScript::Exit
01/12/07 16:40:13.380 -- appLaunchApplicationWrapper::Exit 0

Error 1 Unable to copy file "obj...

Hi there! I am specifically using Visual Studio 2013:Windows Forms Application version 3.5 and this error log keeps popping up! I keep seeing stuff like visual C#, but
how do I fix this?
Error Log:
Error 1 Unable to copy file "obj\Debug\Project.exe" to "bin\Debug\Project.exe". Access to the path 'obj\Debug\Project.exe' is denied. Project

Check the Task Manager and see if the "Project.exe" is in use, or maybe another program is locking the built assembly of your project. Try to close the VS IDE and reopen the project. If this doesn't work, use Process Explorer to find the
using process.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 237

Hello,
I encountered ORA-10561 while I was recovering my DB.
Problem Background :-
I took a hotbakup of my DB running in Windows, I edited the Pfile and recreated the control file
I was able to succesfully mount the DB
The I gave the below command to apply the redologs and recover the DB
And the errors followed as mentioned.
The HOTBACKUP was copied and restored using a USB-PENdrive. I suspect that the datafiles and / or ARCHIVE LOGS would have had some format issues due to O/S {WINXP ---> RHEL5}
If this is the case ? then I would like to know how to convert the format of the files(Datafiles and or Redologs)
into acceptable format
>
SQL> recover database until time '2010-03-15:18:08:05' using backup controlfile;
ORA-00279: change 3447582 generated at 03/15/2010 17:41:42 needed for thread 1
ORA-00289: suggestion : /home/oracle/NEW/ARCHIVE/ARC0000000144_0706577643.0001
ORA-00280: change 3447582 for thread 1 is in sequence #144
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/home/oracle/NEW/ARCHIVE/ARC00144_0706577643.001
ORA-00283: recovery session canceled due to errors
ORA-10562: Error occurred while applying redo to data block (file# 1, block#
1658)
ORA-10564: tablespace SYSTEM
ORA-01110: data file 1: '/home/oracle/NEW/oradata/O1_MF_SYSTEM_5M9ZKSSW_.DBF'
ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 237
ORA-00600: internal error code, arguments: [4502], [0], [], [], [], [], [], []
>
Thanks in advance.
Regards,
Valli

You need to give much more information:
What version of Oracle? 10gR2 is not a version, 10.2.0.1 is a version.
What version of Windows, exactly? What version of linux?
ORA-600 means you need to talk to Oracle support. There is an ora-600 lookup tool, which basically searches the knowledge base (for ora-600[4502] in your case, which brings up a bunch of really, really, really old docs).
How exactly did you take the "hot backup?" There are a number of ways to do things with that name, some of which are just plain wrong.
How exactly did you get the backup from one machine to another? Which exact commands did you use to copy the files to the usb and from the usb? Did you do it more than once?
Why are you using the backup controlfile syntax? There are valid reasons, and invalid reasons to do that.
What exactly did you change in the pfile?
What does the alert log say about all this?

Unable to Import objects into ID

Hi All,
For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
Unable to move object. Change lists were not part of the same import
I tried to activate the change list..but no woek.
Could anyone please advice?
BR
Soumya

Have you checked the GUID in SLD in both the systems?
SLD-->Software Components, to check the GUID.
You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
Note: Before deleting SWCV, make sure any other working objects are not there in the same SWCV.
Now, if SWCV & GUID in both systems are same then again:
1. Export the objects from Dev (.tpz file)
2. Imort the same .tpz file to QA system.
Now go to Repository of QA and
1. Tools --> Import Design Objects
2. Tools --> Transfer from system landscape Directory --> Update Application Components.
Select your components and press Finish button.
And finally try to Acitvate your objects.
Regards,
Sarvesh
*****Reward points, if found helpfull.

Internal lock version management : Unable to copy objects

Similar Messages

Maybe you are looking for