Internal Mail Routing Between HUB servers Is Not Working Correctly

Howdy, Been scratching my head on this one for a while.
First off, running Exchange 2010 Sp3 RU5 across the board.
I have attached a diagram of our environment for visual aid. Please take a look as it makes more sense.
I have drawn the correct mail flow in black and what is happening in red.
Forest A Site A, has a dedicated edge, dedicated Hub and dedicated CAS
Forest A Site A child domain 1, has a multi-roled MBX,HUB,CAS
Forest A Site B child domain 2, has a multi-roled MBX,HUB,CAS
Forest B Site C, has a multi-roled MBX,HUB,CAS
Mail flows TO child domain 2 just fine, but outgoing mail from that same domain keeps routing through HUB in child domain 1 instead of HUB in forest root domain.
The send connector for the organization in Forest A is configured to only send through the dedicated HUB server in Forest A. The Receive connector in Forest A's HUB is also configured correctly. But no matter what i do, mail outgoing from child domain
2 continues to flow to child domain 1 instead of through the dedicated HUB server.
Mail needs to flow so for now i added the HUB in child domain 1 as a source server in the organization's send connector and set up the receive connector in child domain 1 to allow a work around for now.
I think this is an issue in the routing group connector but its just a guess. Any ideas?

Hi,
Active Directory IP site links costs are based on relative network speed compared to all network connections in the WAN and are designed to produce a reliable and efficient replication topology. Therefore, in most cases, the existing IP site link costs should
work well for Exchange 2010 message routing. However, if after documenting the existing Active Directory site and IP site link topology, you verify that the Active Directory IP site link costs and traffic flow patterns aren't optimal for Exchange 2010, you
can make adjustments to the costs evaluated by Exchange.
You can use the Set-AdSiteLink cmdlet to assign an Exchange-specific cost to an Active Directory IP site link.
More details refer to the following articles:
Controlling IP Site Link Costs
Set-AdSiteLink
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Windows Live Mail ? Links to this forum not working correctly.

I got a new computer running Windows 7 and have been using Windows Live Mail.
This is where I get my e-mails for updates to messages on this forum.
The link for the message thread has a link that includes the # sign with the correct message to go to on the page.
Now with Windows Live when I click the link it leaves the number after the # sign and just goes to the top of the thread instead to the exact comment.
I can copy and paste the link into a browser and it works fine but if I just click it it does not work like it used to with Outlook Express.
Any ideas if this might be fixable.
Thanks: GLenn

I still have outlook express running on my OLD SLOW windows XP
My new Windows 7 only has Windows Live Mail so I have to use it unless I get another program.
I just thought that someone here might have figured it out.
I dont know what the extra part after the # sign is called so i havent been luck searching google for an answer.
Here is the link to your message:
http://forums.adobe.com/message/2965072#2965072
but when I click it it just puts this link in the browser:
http://forums.adobe.com/message/2965072
it does work but just takes me to the top of the thread.
Im not sure why it doesnt use the part with the # and number that follows it.
It does see it and if hover over it it sees the whole link.
Just something new to figure out.
I will try a Windows Live Forum too but if anyone knows any hints that would be great too.
Thanks: GLenn

Sync between CR2 and tiff not working correctly

I have a CR2 file in LR3 and have applied some tonal corrections and a post crop vignette. When I try and copy the settings over to tiff file using the Sync button the effects seem over done. I produced the tiff file by selecting two images in LR3, selected transfer to Photoshop as layers, edited/merged, and then saved. The resulting file is saved back to LR as a tiff.
Probably worth noting that when I try and sync between two CR2 files it works. Must have something to do with the tiff file.
Only been using LR for a week or so, so if I'm doing something wrong please advise.

The raw file and TIFF file are two completely different things. The TIFF is fully rendered gamma encoded whereas the Raw has no gamma encoding. So, what you're trying to do will always result in two completely different renderings.

How e-mail is routed between two servers

Hi ,
Please anybody tell me how e-mail is routed between two servers , from the software point of view as well as hardware point of view .
And how Java mail API related to that .
Thanks,
Kiz

If you're looking for a simple answer there isn't one. Here's a place to start.
http://community.roxen.com/developers/idocs/rfc/rfc974.html

10.9.2 Mail not working correctly

I'm the only person in the office to upgrade to 10.9.2 (thankfully!). Since then, Mail has not worked correctly. It is an IMAP account.
When I click on an existing message in my inbox, instead of displaying instantly it takes 3-4 seconds. The screen scrolls light grey, dark grey, light grey, dark grey then the message. I can live with this but it's very annoying.
But worse, I now cannot perform any mail searches to refer back to existing messages I have in any of my mailboxes. Search functions 'to, 'from' 'entire message', 'any' do not work. Even if the message or sender is in the inbox, it can’t find it. This is serious as I'm constantly using this function.
Many thanks if you can help.
Simon

My wife is having the exact same problem all of a sudden with gmail on her MacBook Air. Also running 10.9.2. Everything is running perfectly on the iPhone, but on the Mac, no new email is downloading and the inbox is not syncing.
Hoping someone can help. Thanks!

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Have Mail Version 4.6 (1085), is not working properly not receiving mail. I sent a test message to my computer; it took over an hour delivering.

Have Mail Version 4.6 (1085), is not working properly not receiving mail. I sent a test message to my computer; it took over an hour delivering. There are multiple copies of messages appearing in the recovered folder
My computer is a MacBook, version osx 10.6.8
All help appreciated
<E-mail Edited by Host>

Hi vin rouge,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Cheers,
- Judy

Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
Tony

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Delete Statement is not working correctly

Hello,
The following delete statement is not working correctly.
If I press delete it will delete everything in the category table
I don't know whats wrong with it.
----delete row from category if there is not infrastructure to support------
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;
Thanks
Mary

Hi,
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;So, if P12_DFCY_SEQNO4 does not exist, then I would expect all records to be deleted because the NOT EXISTS() function would just return TRUE for every record on the table. Somewhere in the statement, I would expect to see something that links between the table being deleted from and the NOT EXISTS() data or, perhaps, using the P12_DFCY_CATG_C value as a filter?
Andy

I updated to Maverick and now my scroll bars on mail, safari and all apps doesn't work correctly. Also, can I hang back to the old mail from 10.6.8?

I updated from 10.6.8 to Maverick 10.9.2 and all of my apps scroll bars do not work correctly as in mail, safari, etc... Anything that can be done? Also, the mail interface is completely different from 10.6.8...is there a way to change back to the look of 10.6.8 or??? Did i make a mistake by updating to Maverick? Help please!

Scroll bars:
Scroll direction:
Mail:
..is there a way to change back to the look of 10.6.8
OS X Mavericks: Revert to a previous OS X version

Program not working correctly-Help!

class Sort
     /* method takes an array of integers as an input,
     * and returns a copy with the element values sorted
     * by select method.
     int[] selectSort(int[] input)
          /*declare variables to be used in array */
          int x, y, max, temp;
          int[] select = new int[input.length];
          /*This loop reads the entire array */
          for(x = input.length - 1; x>0; x--)
               max = 0;
               /*This loop checks to see if any number is
               lower possible greatest number /
               for(y = 0; y <= x; y++)
               {//Returns number if lowest number
                    if(input[y] > input[max])
                         max = y;
                    }//end of if statement
               }//end of inner loop
               /*Switches the values */
                    temp = input[x];
                    select[x] = input[max];
                    select[max] = temp;
          }//end of outer loop
          return select;
     } //end of selectSort()
     /* method takes an array of integers as an input,
     * and returns a copy with the element values sorted
     * by bubble method.
     int[] bubbleSort(int[] input)
          int[] bubble = new int[input.length];
          for (int x = 1; x < input.length; x++)
               for (int y = 0; y < input.length - 1; y++)
                    if (input[y] > input[y+1])
                         int temp = input[y];
                         bubble[y] = input[y+1];
                         bubble[y+1] = temp;
          return bubble;
     } //end of bubbleSort
**********************Test Class**********************
class TestSort
     public static void main(String[] args)
          /* count variable used as loop counter when
          * result table display is generated
          int count;
          /* variable for object of class Sort */
          Sort x;
          /* create object of class GroupEx2 */
          x = new Sort();
          /* create a source array of integer elements */
int[] y = new int[5];
/* assign values to array elements to be sorted     */
          y[0] = 8;
          y[1] = 5;
          y[2] = 3;
          y[3] = 9;
          y[4] = 1;
          /* create variable for target of select sort array */
          int[] ss;
          /* create variable for target bubble sort array */
          int[] bs;
          /* call method to return an array with element values select sorted*/
          ss = x.selectSort(y);
          /* call method to return an array with element values bubble sorted*/
          bs = x.bubbleSort(y);
          /* display original and sorted arrays in three columns*/
          System.out.print("Input Array" + "\t");
          System.out.print("Select Sort" + "\t");
          System.out.println("Bubble Sort");
          for (count = 0; count < y.length; count++)
               /* Column 1: original array */
               System.out.print("input[" + count + "] = " + y[count]);
               /* tab between columns 1 and 2 */
               System.out.print("\t");
               /* Column 2: select sorted array */
               System.out.print("select[" + count + "] = " + ss[count]);
               /* tab between columns */
               System.out.print("\t");
               /* Column 3: bubble sorted array */
               System.out.println("bubble[" + count + "] = " + bs[count]);
          } // end of display for loop
     } // end of main()
} // end of class TestSort

Thanks for the Bash! I'm surprised you had the time
for it.Go back and look at your original post. A whole bunch of code, and the only description of the problem is "not working correctly." Do you honestly think that's a reasonable way to ask for help? Do you go to the doctor and say, "I'm sick" and then just wait for him to cure you? Do you take your care to the mechanic and say only, "It's broke"?
Look, this is your problem and it's your responsibility to fix it. There are people here who are happy to help you, but it's up to you to provide a reasonable statement of what's wrong, what you've tried, what you don't understand. For instance:
Does it compile? If not, post the complete error message.
Does it run, but throw an exception? If so, post the stack trace.
Does it not throw an exception, but not behave the way you expect? Then describe the expected beavior and the observed behavior.
Do you really need to be told this stuff? It seems like common sense that when you're asking people to spend their time helping you, you should give them the information they need to be able to do so.

BT DNS again not working correctly

again BT DNS server not working correctly. Some of the websites not openig.
To get all you website opening you need to change the DNS settings.
I'm using opendns 208.67.222.222 and 208.67.220.220

I reset all my pc, hub and open reach modem before I post here.
It's standard procedure I do when I have internet issues.
It wasn't working correct;y for about 45 min when I've change my DNS settings. Then I've checkied it again about 1h later, was still same.
When I checked it about 3h after initial broblem discovert it was all working fine.
Me and my frined we noticed that BT DNS server is playing up on regular basis 1-2 times a month.
Typical it's for about 20-30 min then is back to normal (unless it's like about 1h ago when it was f***ed for 2-3 days).

Parental Controls are not working correctly. Websites I've listed under Allow Access are still blocked. How can I fix this?

Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Internal Mail Routing Between HUB servers Is Not Working Correctly

Similar Messages

Maybe you are looking for