Internal microphone problem HP ProBook 6460b / Windows 7 Pro SP1 64bit

I have a problem with internal microphone on my HP ProBook 6460b with Windows 7 Pro SP1 64bit.
Sound works OK but the internal mic doesn't record any sound. Drivers are up to date - IDT High Definition Audio CODEC v. 6.10.6328.0 installed from HP drivers support page.
HP ProBook 6460b
p/n: XU550AV
Any ideas?

Hi,
My laptop have the same problem too.
Time of this report: 5/9/2012, 08:58:44
Machine name: xxxxxx
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP ProBook 4530s
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz
Memory: 8192MB RAM
Available OS Memory: 8126MB RAM
Page File: 3300MB used, 12950MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
Sound Devices
Description: Speakers / HP (IDT High Definition Audio CODEC)
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76D1&SUBSYS_103C167D&REV_1002
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: stwrt64.sys
Driver Version: 6.10.6365.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 9/8/2011 05:42:28, 535040 bytes
Other Files:
Driver Provider: IDT
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: Communications Headphones (IDT High Definition Audio CODEC)
Default Sound Playback: No
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76D1&SUBSYS_103C167D&REV_1002
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: stwrt64.sys
Driver Version: 6.10.6365.0000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 9/8/2011 05:42:28, 535040 bytes
Other Files:
Driver Provider: IDT
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Microphone (IDT High Definition Audio CODEC)
Default Sound Capture: Yes
Default Voice Capture: No
Driver Name: stwrt64.sys
Driver Version: 6.10.6365.0000 (English)
Driver Attributes: Final Retail
Date and Size: 9/8/2011 05:42:28, 535040 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Integrated Microphone Array (IDT High Definition Audio CODEC)
Default Sound Capture: No
Default Voice Capture: Yes
Driver Name: stwrt64.sys
Driver Version: 6.10.6365.0000 (English)
Driver Attributes: Final Retail
Date and Size: 9/8/2011 05:42:28, 535040 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Description: Stereo Mix (IDT High Definition Audio CODEC)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: stwrt64.sys
Driver Version: 6.10.6365.0000 (English)
Driver Attributes: Final Retail
Date and Size: 9/8/2011 05:42:28, 535040 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Please notify me when this issue is fixed.
Thank you

Similar Messages

  • No sound recorded on the internal microphone after SoundMAX driver update (Windows XP)

    My internal microphone is not picking up sound after I upgraded my SoundMAX driver (available from the Lenovo website here) to version 5.10.1.571.*  It looks like this was a problem before and was supposedly fixed in 5.10.1.5520 which is included in the version I have.
    I have tested the audio through the Control Panel utility, i.e., Sounds and Audio Devices Properties - Voice - Test hardware.  No dice: my voice could not be detected.  I also tested via the Windows XP sound recorder utility, i.e., Accessories - Entertainment - Sound Recorder.  Same result: silence.
    In the Control Panel's Sounds and Audio Devices Properties, I have verified that the Default device for Audio and Voice (playback and recording) all are set to "SoundMAX HD Audio."  The SoundMAX software that ships with this laptop (also called "control panel") is very scaled back.  There doesn't appear to be anything interesting there to adjust.
    Thanks in advance.
    * I updated the driver because I was troubleshooting my original problem.  My plug and play Logitech laptop speaker suddenly stopped working.  Alas, that problems remains and I have created a new one.

    Hello,
    Here versions of the Audio Features for Windows XP driver that I was able to find:
    5.10.1.5410 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka112ww.exe
    5.10.1.5520 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka114ww.exe
    5.10.1.5670 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka113ww.exe
    5.10.1.5710 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka116ww.exe
    Hopefully, one of these will work for you.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Pavilion G7 1365dx internal microphone problems (skype).

    I just purchased this notebook and when I tried to use Skype, everything works except the other person can't hear me.  Mic is enabled and not muted.  Internal Mic (IDT High Definition Audio CODEC).  System checked for updated drivers, system said drivers are up to date.  Thank you in advance for your help.

    Hello @Pistaba1975,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the microphone on your notebook is enabled, but will not record any audio on Skype. I would be happy to assist you in this matter!
    Are you able to record audio using a different program on your computer? Were you able to record audio from Skype in the past? 
    In the meantime, I recommend following the steps in this document on Resolving microphone problems (Windows 8). This should help enable the audio-in when using the microphone.
    Additionally, I also suggest following this resource on Microphone Troubleshooter to ensure that your Skype software is communicating the audio being transmitted to your audio-in device.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • IMac internal microphone problems

    I have a recurring issue with the internal microphone in my iMac. Occasionally, it will just stop working and won't pick up any sounds. The two resolutions I've found are to either unplug and re-plug the external speakers I have connected (strange) or, when that doesn't work, to restart the computer (less strange). Has anyone had a similar problem with their iMac? Adjusting the settings in the sound control panel does nothing to make this work. It seems that this is a software problem, since it's always fixed by restarting, but of course I'd like to find some way to fix this without having to restart. Thanks.

    I am encountering similar issues, looking at the sound preference pane, I can see that the microphone is showing noise, this is duplicated on a skype test call... just noise no external sound is being picked up. Steps I have taken so far are:
    Zapped the PRAM
    Thrown away my sound preferences
    Ran software update
    Restarted the iMac a few times
    Another thing to note is that the microphone was working ok this morning, then the sound started to degrade and now just noise.
    Thanks in advance for any help or direction to solve this!
    Cheers,
    Sean

  • Audio/Internal Microphone problems

    I can't seem to record anything on my PB. I'm trying the internal microphone and an external Apple microphone and a couple of different audio programs including Quicktime. Whenever I switch back and forth from "internal microphone" to "Line in" in the system prefs, I get a momentary audio input level signal, but nowhere can I get an actual sustained audio in signal. Anything I record comes up blank.
    Could my internal audio hardware be dead?
    - N

    I'm not sure why you're not getting a signal from you internal mic, but you can't use a regular external microphone with the Line In port. Line In requires a stonger signal than a microphione can provide, so you need to use a pre-amp to boost it.
    So that could explain why the Apple external microphone isn't working, although it doesn't rule out the possibility that there's a problem with your PowerBook's audio hardware.

  • Help - Internal Microphone Problem Toshiba Satellite M305-S4910

    Hello,
    I really hope someone can help me.  2 days ago I bought a Toshiba Satellite M305-S4910 after reading rave reviews on BestBuy.com.    After attempting to use the internal microphone I discovered the following problem.
    When I am on a video chat, it sounds like there is a lot of static on the line.  As soon as I plug in a headset, the sound goes away.  I called best buy for the free 14 day support and they said I have two options.  Bring it in to exchange for a new laptop or PAY for a service person to come troubleshoot it for me.   I have spent the last 3 days transferring files, loading programs, and now I have just about everything set up on this laptop.  I do not want to go EXCHANGE it for a new one and do that all over again.  I can reload software if its something simple like that.  Does anyone have any ideas how I can diagnose and possibly repair myself?  Part of the reason I liked this one is the built in mic and webcam since I video chat A LOT!  
    Thanks
    Kristine

    Hi,
    Since that the problem goes away with the use of external mic, it is very likely that the internal mic is malfunctioning or maybe a loose wire to the mic is causing the problem. Fixing these yourself means taking the notebook apart and possibly voiding your warranty.

  • Recording sound from internal microphone problem

    I am trying to record sound with my internal microphone.
    From quicktime no sound records
    From ISHOW U microphone becomes really loud and rings.
    Below are my sound settings
    http://scrappity.com/files/jpg4onw6bhsmxn561zxj.png
    http://scrappity.com/files/3gcaq6wu748b5byje7bm.png
    Can someone help?
    Message was edited by: teawithmilk

    You've selected *Line In* instead of *Internal Microphone* as your input source.
    I have no idea what iSHOW U is.

  • T410(2539) Internal Microphone problem

    Hi All,
    I just find out my internal microphone was not working(Skype or MSN). i updated the driver for conexant audio to version 4.95.48.50 however it still doesnt work. I am using Win7 64 bit. Please kindly advise on this issue. Thanks

    Some generic advice. Look in control panel, under "sound" and see what device is listed for "recording", make sure it's enabled and says it's working. Also check in your apps, if your system has options like bluetooth, it might have it set as default, in which case you'll need ot change it to your systems internal mic, but most important, you should post this in the proper section. Your topic will be seen by more T400 series users if you post in that section. This is for older models that were discontinued at the end of 2008.
    If a moderator comes by first, perhaps they will move it for you.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Problema Apagado Edge 71 - Windows 7 sp1 de 64. (Original)

    Buenas, tengo un problema con una Edge 71 - windows 7 sp1 de 64. (Original)
    Cuando la apago, desde el menu inicio - Apagar, o por comando Shutdown o cualquier otro metodo, la pc no termina de apagar. los led y la  fuente siguen prendidas.
    De dejar presionado el boton de power 10 segundos. apaga los led y sesa actividad en fuente. pero no de otra forma.
    Este error solo sucede si es Windows 7 - 64 . de ser de 32 bits no lo hace. confirmado.
    alguna idea de lo que puede estar pasando?
    Drivers al dia. bios. corri los diagnosticos.. todo ok.
    Se agradece una mano. Saludos.

    Los causantes de comportamientos extraños con las opciones de energia suelen ser el modo que traen algunas BIOS mas antiguas (S1 o S3) y los controladores graficos, no creo que tu BIOS las incluya al ser un equipo mas actual, asi que mirate si puedes actualizar el controlador grafico por una version mas reciente.
    Tambien podria estar interfiriendo algun controlador o aplicacion, para comprobar esto entra al sistema en modo seguro con F8 y comprueba si efectua bien el apagado.
    Tambien puedes realizar un inicio limpio para ver si lo provoca algun servicio:
    -Tecla Windows + R
    -Escribe en el cuadro de ejecucion: msconfig
    -Pestaña: Servicios
    -Marca la casilla: Ocultar todos los servicio de Microsoft
    -Desmarca todos los servicios que hayan quedado
    -Abre la pestaña: Inicio de Windows
    -Clic en: Abrir el administrador de tareas - pestaña de Inicio
    -Selecciona cada uno de los elementos y deshabilitalos uno a uno haciendo clic en el cuadro inferior derecho
    -Cierra el administrador de tareas
    -Vuelve a la pantalla de "Configuracion del sistema": Aplica y Acepta.
    -Reincia y comprueba si apaga correctamente.
    Saludos Cordiales,
    Alez Curquejo
    Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
    Es importante indicar que los foros complementan los recursos de los usuarios pero no reemplazan al Servicio Técnico Oficial de Lenovo, para ello puedes contactar en Página de Soporte Oficial de Lenovo

  • G4010, Windows 7-sp1 64bit, scan doc says all is good, software will not reinstall.

    Have HP Scanjet G4010. Windows 7-SP1 64 Bit. The doc program that I ran says connection good. The "driver only" download works good. However, the primary software that comes with the scanner (also includes the twain driver) will not install completly. When I try to install it, it complains that it can not find the SCAN.MSI file in the E:\temp\7Z????\scan directory. That file and even the directory do not usually exist. I point the program to a location with a scan.msi (uncompressed install program), and it says it is not the correct file. The next time I tried to run it, It saw the attempted install of the software and wanted to uninstall a couple of the programs. I told it to go ahead and delete. It deleted the programs but now if I run the install, it still wants to delete the files and shows me nothing that I can delete.  I tried to delete the directories from drive C: and references from the Registry to any and all HP software. No difference in the install. I also tried running the MS Fix program for software install and uninstall problems.  It claimed to fix something, to change was seen in HP software behavior.

    Still looking for an answer...

  • Internal microphone problems

    Recent return of iMac for broken internal microphone

    I wish I could figure out what your issue is so I could duplicate it here. I'm actually trying to get the microphone to stop working. I turned the volume on the input all the way down when I bought the machine three weeks ago, and at least once I've found it had turned itself back up to the mid point. My previous MacBook Pro did this as well, and I found I had to check regularly to make sure it wasn't on.

  • Internal Microphone inop, after upgrading to Windows 10

    I have two HP Pavilion 11 x360 PCs, after upgrading to windows 10, both internal microhones do not work.  I have tried using a bluthooth headset, (audio works) but the microphone does not. I have tried upgrading the soundcard driver using the Realtek High Definition Audio Driver ( Realtek Semiconductor Corp.  -  6.0.1.7564) found on HP's driver website and is still will not work.

    Rolled back one of the PCs to Win 8.1 and am in the process of updating the drivers, thus far the microphone still does not work.

  • Internal Microphone Problem

    I am the owner of a A305-S6829. When the lid is open the microphone does not function. It is necessary to barely close the lid to make it function. I think the problem is that the wire harness of the camera and the microphone is in some way broken and it make connection when the lid is closed. I know this wire harness pass through the right hinge of the lid. The situation is that i am trying to buy this wire harness but I can not find any internet site to buy them. Can someone help me with that or sugest me other solution.
    Thanks!!
    Solved!
    Go to Solution.

    Satellite A305-S6829
    I have not taken one of these apart. But, these mic cables look quite long, combined with the instructions, I hope this will help.
    Disassembly of Satellite A305/A305D
    Removal of LCD screen and inverter board from Satellite A305/A305D
    Satellite A305 Mic-Mic cable
    Good luck.
    Mike

  • HT1379 internal microphone is not working in macbook pro 13"

    I have a macbook pro 13"(mid 2011) currently running OS X 10.8.2. My inbuilt microphone is not working. I have tried all system preference settings and even Audio MIDI setting but still not working.

    Try a commercial optical drive cleaner that is available in any store where they sell cd's/dvd's.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    http://support.apple.com/kb/HT2801
    Best.

  • Screen does not turn on after sleep - ProBook 4530s - Windows 8.1 (64bit)

    Hi everyone,
    Not sure if this had to be posted in notebook display and video section, or laptop lockups, freezes and hangs. Anyway, I have a problem, where everything is fine with the computer, it's running smoothly, but whenever I make it go to sleep, after it does it instantly, the signals are of a regular laptop sleep - power buton flashing, no other signs of computer being on.
    However, the problem appears when turning the computer back on after sleep. After pressing the power button, the computer straight away starts working - you can hear the fan turned on, etc, just that pretty much nothing changes with the screen. Sometimes, with some particular light directed towards the screen, you can even see, that the computer is on (seeing the clock on the display), just like the brightness was set down to 2% or something. And there is nothing that helps from what I have tried to do (tried reinstalling both AMD drivers and Intel HD drivers). I researched this problem extensively but could not find a solution, however, as I have noticed that this is quite an old problem (assuming from the date of the posts this problem first showed up), there might be a solution for it, to which I just have not noticed the answer?
    If anyone can help me, please do, the sleep function is essential and extra important function when living on campus at university, I just cannot operate like this.
    Hopefully someone will know, thank you in advance.
    Dinas

    Hi @dindanas,
    Your ProBook 4530s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

Maybe you are looking for

  • Multiprovider is not acting properly

    Hi Gurus, Need some help on the following issue. A multiprovider built on 4 cubes and profit centre info objects. For a new reporting requirement on this multiprovider, i had to filter based on navigational attribute.  i found after filtering using t

  • An error occurred accessing a data source.

    Hi, I have seen many posts talking about this error but still i am facing the same issue. The process i have followed is: 1) created infopath form with receive data connection to SQL DB with plain username/pwd 2) placed the repaeating table of receiv

  • Network Drives / FCP Scratch Drive

    Hi This might be a networking question, but here goes. I have FCP 5 runnning nicely over GB Enet to a drive cluster. The workstation has an account shared by editors. The editor logs into the machine, then mounts a personal network share using smb an

  • JBO-25003: Applicaiton module instance Error

    Hi Experts, Currently i am facing the following challenging issue. JBO-25003: Object application module name ApplicationModule is not found error. Can anyone explain me what is actually causing this. Here is the current project design, 1) we have app

  • Things not working in Vi

    The following features are not working in Vista on my Audigy2 ZS board:?- The EAX control panel. So I cannot set the "stereo surround" setting.- The THX control panel. So I cannot adjust these settings.- DTS and dolby decoding!!- The subwoofer does n