Internal Modem configured but not connected?

I have a iMac G5 on broadband(along with a PC)servere was down for 2 days now okay Mac had to be reset to work again but PC okay,now the message I get on Mac is "Internal Modem is configured but is not connected. Internal Modem is set up to dial........ how can I undo this so its on the broadband scene again? I have been searching hard drive etc to find how to configure it but no luck there.
Help will be appreciated.
Barb

Hi barbaramac:
Could you provise some more details as to your setup, how do you connect to the internet? DSL Cable?
Assuming you have a home network with a router, you need to go into 'System Preferences' and choose 'Network', select either 'Ethernet' or 'Airport' from the drop down menu whichever applies and 'configure IPv4' by DHCP on the TCP/IP tab. That should do it.
-Robert

Similar Messages

Node display off , Central data cache configured but not active

Hi
We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
we are getting this error in RZ20 (central system)
Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
Operating System --AIX
Sap version--ECC 6
Database-db2
Regards
Shashi

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

Node display off , Central data cache configured but not active while tryi

Hi
We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
Operating System --AIX
Sap version--ECC 6
Database-db2
Regards
Chamba Shashi
Edited by: SHASHI SAMAL on Apr 28, 2009 6:25 AM

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

Bluetooth paired with Photosmart but NOT connected.

Bluetooth connection on android device says paired with Photosmart but NOT connected. How do I get connected?

You can always manage or configure the switch via HyperTerminal. You can connect the PC to a serial cable and access the switch via the serial port. Hyper Terminal doesn’t depend on the IP address of the switch so you can manage it. To access the switch via Hyper Terminal, follow this link:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=16613&p_created=1212...

Bluetooth Set Up But Not Connected Blackberry vCards

Problem: I'm trying to send vCards to my new Blackberry Pearl 8120, but cannot get the mac to send the file to the Bluetooth phone.
1. Bluetooth connectivity IS turned on in Sharing Preferences.
2. When I run "Set Up Bluetooth Device" it finds the phone, no problem.
But in Bluetooth preferences it lists the phone as "Discoverable" and "Paired" but "not connected."
The only time I've gotten a green light for "connected" is when the set-up was running.
Help!
How do I send vCards to the phone - I DO NOT want to type all this stuff over again, not, in this day and age, should I have to.
Seriously - I've seen other posts on similar subjects all unanswered - Mac Support, where are you?

Attached is a list of HP Airprint enabled printers. Your printer is not on this list. If it is wireless, you can purchase an App from the App Store, which will allow you to print. Printopia and Print Central are two which are recommended, both cost about $9 (US).
http://support.apple.com/kb/ht4356

Does it matter if the lightning cable is plugged in but not connected to an electrical outlet? Will this drain the ipad battery?

Does it matter if the lightning cable is plugged in but not connected to an electrical outlet? Will this drain the ipad battery? We use an ipad cart at school, and some of the teachers will connect all the ipads up to the cart, but then neglect to power up the cart. The laptop with the cart has already had the battery wrecked because of this (within a two month period), and I am concerned the ipads may have an issue if this continues to happen. I need some reassurance before I make the other teachers paranoid!

ok this one is kind in the gray area for me. I say if it is plugged in to a power up cart but not plugged in to a outlet, then all is is doing is not charing, and of course lossing a charge over time in standby, not really causing any issues. User guide and apple sites say it will drain the battery life.
Important: The iPad battery may drain instead of charge if iPad is connected to a computer that’s turned off or is in sleep or standby mode, to a USB hub, or to the USB port on a keyboard.
however “Battery life” means the time your iPad will run before it must be recharged.
so I think it will be ok, as long as you charge it as usaul it should be fine.
just use these links for and understanding for batteries and the ipad, of course the user guide.

TS2370 My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

Try rebooting the router. Just remove the power for a few seconds. No settings are lost.

SAP MMC Says Dispatcher running but not connected to message server

I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid   560 (PC with Windows NT)
[Thr 4516] relno      6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno    43
[Thr 4516] intno      20020600
[Thr 4516] pid        4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c   1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.

There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor

Central data cache configured but not active

Hi,
I am currently at a customer site and am configuring the solution manager system as a CEN.
The sapccm4x en ccmsr agents have been registered and memory has been allocated in the CEN system for the central data cache, but whenever I open a monitor the following message is listed at the top of the screen:
Central data cache configured but not active
Suggestions on how to configure this cache and the impact of not doing so will be rewarded.
Regards,
Sander

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

TS2756 I can't get personal hotspot to work on my iPhone 5 I backed up my iPhone 4 them changed over today. It's on but not connecting?

I can't get personal hotspot to work on my iPhone 5 I backed up my iPhone 4 them changed over today. It's on but not connecting?

Hello MYPT,
The following article should be helpful in getting your Pesonal Hotspot working.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Allen

I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming

Environment creating But Not Connecting Oracle through OCCI

hi Guys,
Environment creating But Not Connecting Oracle through OCCI in VC++2005 .NET ..... ,Oracle 10G ,
But Same Code is Working VC++2003 .....
giving the Following Error......
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
I try to download INSTANTCLIENT new one for VC++2005 that One is Not down loading... therefore the same down instantclient is copied in VC++2005...
http://www.oracle.com/technology/tech/oci/occi/occidownloads.html
I downloaded abobe URL for VC++8 and copied into that INSTANT client.....
But still not connecting.....somebody who has done in VC++2005 connection through OCCI... help me step by step Plzzzzzzzzz....
friends can anybody tell how to connect OCCI .....
advance thanx ......
yours LUV

Hi guys,
I have the same problem. I've tried using the supplied demo in instantclient sdk but I keep getting this SQLException without a message.
Any help is welcomed.
Cheers,
Sorin

Trying to transfer pictures from device to BB desktop pictures but not connecting.

hi
Trying to transfer pictures from device to BB desktop pictures but not connecting.
seems i was able to back up.
downloaded new software to desktop while BB was connected vis USA to computer.
Solved!
Go to Solution.

Well the new Desktop Manager can ONLY sync up with a Media Card. You would need to download Desktop Manager 4 with Roxio Media Manager to access the device memory.
- Please Thank the person that helped you by giving them Kudos. Click the Kudos Button (beside the Reply Button) at the bottom of the post which helped you.
- Please resolve your thread by marking the post "Solution?" which solved it for you!

Why is my iphone 4s showing me 3G but not connecting (It did until now with no problems)?

why is my iphone 4s showing me 3G but not connecting (It did until now with no problems)?

Hello, Gadag.
Thank you for using Apple Support Communities.
Here is a resource you may find helpful that will walk you through some troubleshooting steps for this issue.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Cheers,
Jason H.

Smartphone paired but not connected via bluetooth

My HTC Desire HD is paired via bluetooth but not connected, how do I get it to connect?

Hello:
I know nothing about your particular phone, but this article may help:
http://docs.info.apple.com/article.html?path=Bluetooth/1.0/en/blu23.html
Barry

Internal Modem configured but not connected?

Similar Messages

Maybe you are looking for