"Internal Muxer Error"

I have been searching online for the last couple days about this error and it seems to either be uncommon or undocumented for the most part. Or, so easy to fix no writes anything and I'm a fool....
either way, what causes this, how is it fixed and what are the best ways to avoid getting it?
I'm encoding using Episode 4.4.1 and using DVD SP 4.1.2
All help appreciatted.
Thanks.

Have a very close look at the point in your timeline where the error occurred. If you look at the files that have been encoded so far (just using Finder) you will be able to see where it stopped. Go to that point on the timeline and chances are you will find a misplaced chapter or similar issue. If that doesn't resolve it have a look at the original movie at that point as well.
Good Luck!
James

Similar Messages

Internal Muxing Error - How I Fixed Mine - FYI

FYI: I received the "internal muxing error" message during a build. I thought I'd post what happened, what I found and how I mixed mine in case it helps someone else.
I was building a project using a "project template" that I've used many many times in the past. (I just drop a new menu and new assets into an old project thats been saved without any assets). The project consisted of a menu connected to 4 tracks. Each track contains a 30 min film.
About 70% of the way through I received the "internal muxing error" and the build stopped. This was when muxing Part 3. This happened each time I re-tried the build.
To cut a long story short:
I checked the built project which was 3/4 complete. I had a look at the build log and it indicated which VOB was the last and thus which one had the problem. Oddly enough a VOB for the next track had been created.
In each track I placed 1 second of black, (a special mpeg2 and ac3 assst), at the start of the track,followed by the main asset, followed by 1 second of black again. The always worked and looked good on playback.
I traced the probelm, through some trail and error to the 1 second of black at the end of track 3. eg; removing it resulted in a clean build, putting it back resulted in the build failing.
I wanted to keep the 1 second of black at the end of the track, so I ended up trimming the video asset just enough so that it was about 1/2 second shorter than the audio asset, and adding back the 1 second of black at the end of the track.
Oddly enough, this build worked. I burnt the dvd and it was fine. Everything worked.
I really don't understand what causes the "internal muxing error" message. (I've printed some other posts and will read through them in detail when I get the chance). And I really don't understand how what I did fixed it. And as I've used this "project template" dozens of times in the past I don't understand why it suddenly failed, besides new assets everything was the same, and even the new assets were "standard", nothing new about them.
So there it is. Weird.

Jay, thanks for the summary.

What is "Internal Muxer Error" - How to fix it???

I'm trying to burn a simple/basic project: 5 short films (one 15min, the others under 4min) that I put into a template - and I have no additional menus save the first. I have no transistions or anything else complicated. Just the menu and the movies.
Here's the backstory: I had built this same project before, successfully burned at least 10 DVD's of it, and then moved it from my hard drive to my external hard drive. When I went back later to burn some more, I re-connected the assets with the project and tried to burn again - only to get this "Internal Muxer Error" that stops the building/formatting. I went through all the preferences and all other options - I retraced my steps as best I could, to no avail. So I resorted to moving my assets back onto my hard drive and I re-created my project from scratch.
And I'm still getting this "Internal Muxer Error" in the "build" stage of the burn process - even though I did the same things to this new project that I had done when I first started.
What is this error and how can it be fixed? I noticed a thread about the error below, but I didn't understand a thing in that discussion. And my project is different from that one because I am not using multiple angles or anything spiffy. I think I'm making about the most basic project you can come up with.
Any help/suggestions are greatly appreciated. Thank you so much in advance.

Building Project Short Films
9/7/05 11:32:18 PM
Build Folder /Users/danielbell/Desktop/Short Films 2003-2005
Starting DVD Build SHORT_FILMS...
Compiler Initializing...
Precompiling Project SHORT_FILMS
Compiling VMG Information...
Created 7 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM3
Created 5 PGCs in VTSM4
Created 5 PGCs in VTSM5
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
Compiling Menu PGCs...
Writing VTS030.VOB
Compiling Menu PGCs...
Writing VTS040.VOB
Compiling Menu PGCs...
Writing VTS050.VOB
5 VTSs and 5 Titles will be created...
Compiling VTS#1 (Outlook)...
Muxing VTS011.VOB
Internal Muxer Error
Build cancelled
thanks!

A unique Internal Muxer Error problem

I'm using DVD Studio Pro 4.1.1
I've searched through threads and have found that people have gotten this message, but never under the circumstances which I got it at.
I have a stand alone DVD recorder that records DVD-RAM discs. I was hoping to record my favorite TV show and then rip it to my computer so that I could:
1. Cut out the commercials without having to sit and watch it, I could just cut out the commercials using MPEG Streamclip
2. Get more on video on my DVD
So, I ripped the MPEG2 from the DVD. It was recorded in XP mode, which fits 1 hour. Since the show is 30 minutes, I figured I could fit 3 episodes on a disc (I'm very picky about video quality) because without commercials they'd be about 20 minutes each.
I used Toast Titanium 8 to rip the video from the DVD-RAM disc, and it rips it as a mpeg2. Now, I know DVD Studio Pro 4 cannot handle MPEG2 video that is already muxed, so I demuxed the video and the audio. I pull them into DVD Studio Pro without any issue and got everything set. I just have a basic menu, no chapter markers for each title, nothing. The total file size is a little larger than allowed, but that's okay cause I can just compress it when burning it with Toast, that way the disc is 4.36gb at the highest bitrate possible.
When I go to build though I get the dreaded Internal Muxer Error.
The video is encoded at 8.9mbps, and the audio is AC3 192kbps.
Now, I would just use Toast to make the DVD but Toast keeps wanting to re-encode it because I don't think it will burn anything about 8mbps.
Heres the info of the m2v file from Quicktime:
MPEG2 Video, 640 x 480
FPS: 29.94
8.94 mbits/sec
Could the FPS be the issue? I mean, the DVD RAM disc plays fine on my DVD Recorder.
Does anyone have any suggestions? If it's encoded at too high of a quality, is there a way to lower the bitrate slightly? I've worked in video for a while but have never had to take a mpeg2 video file and re-encode it, usually any re-encoding I'd do with DVD2Xone or Toast Titanium, using their disc image compressing. When re-encoding the mpeg2 itself with Toast the quality was bad and it was filled with interlace looking lines, except bigger.
Any help would be greatly appreciated!

Hi Adam
Sorry to tell you this (especially after all the hard work you put in explaining it) but this forum is used as a legitimate arena for users of DVDSP to post questions.
It may not seem like much to you but what your doing is illegal and someone (maybe me :)) will be losing money on something they put much work into - really.
I would suggest posting somewhere else.
Eric

Get Internal Muxer Error

I have completed many copies of my DVD and have finally corrected all the errors that I can find and now when I go to Build in DVD Studio Pro in will not finish. It gives me an Internal Muxer Error. I thought this was just the audio, so I eliminated all the audio and it still does it. The main changes I have made are corrections in spelling. This is about 2 hours long, but is made of 16 separate timelines all put on one track. Does anyone know what is happening?

You should be able to hear the AC3 file
Can you hear the aif file play in Quicktime Player or iTunes?
Also double check the AC3 settings - A data rate of 160 or 192 is usually good, you should set Dialog Normalization to -31, preprocessing to none
Take a look about halfway down the following page for the settings (those above and some others)
http://dvdstepbystep.com/fasttrackover.php
Double check to make sure the audio is in the right track (it can happeen) and
make sure you did not place the audio in an audio track that you somehow disabled
I had this happeen recently on some AC3 files thaat I used in a DVD SP 3 project - no sound but it worked in DVD SP 4.
Did you do the troubleshoot - repair permissions, delete prefs, etc.?

Internal Muxing Error

Hey guys,
came across something very interesting today.
for the first time i received this error when building my project.
initially i thought it was a bad VTS, since i was just re-using the same one as a template. i deleted it, created a new VTS and same muxing error.
keep in mind that i was using many, individual encodes, not just one long stream. i figured that one of them was corrupted, but which one was the question, since the error is pretty general.
i thought that maybe the file was corrupted, header info maybe but it was all good, since i know the telltale sign in DVDSP of a corrupt header info or a file.
someone in the DVDSP posts suggested to view the .VOB's in the VIDEO_TS since it still build, but to see where the end of video was (as in scene).
i took the VOB into mpegstreamclip and saw that towards the end, my timecode jumped ahead about 7 frames. i also noted the timecode in mpegstreamclip and crossed referenced it with DVDSP (i had to revert my video stream timecode to 00:00:00:00 in DVDSP, since this is how mpegstreamclip views it). then thats when i saw something amazing!
turns out that the mpx3000 was adding an extra GOP! ONE EXTRA GOP (in my case 15 frames). there was NO audio associated with this mystery GOP. also, it was at the end, NEVER at the head of a file.
i did what is a big no no, i trimmed the file 2 GOP's but had to also trim the audio. i HAD to make sure that the audio was synced to video as well, since this doesnt happen automatically, or create a new, full audio file like the spruce that comforms perfectly in Spruce (sigh).
i saved and compiled again. suffice to say there was a total of 8 files that had ONE EXTRA GOP! i trimmed 4 seconds of video that were associated with nothing!
i did a batch encode on the mpx3000 and for some reason, added 1 GOP to these files. when i went back to check my out points from the batch list, all was good!
i also tested these files in a standalone VTS, and it build just fine. the trouble seem to come when i butted the files next to each other!
i made sure all audio was synced to video, made sure that i had no other errors and i was good to go!
just thought i would share!
Mikey m.

Mikey
I have had similar issues in the past
Sometimes using MPEGAppend cured it
A couple of times I zoomed in as much as possible on the timeline and actually saw gaps in the timeline which cured it.
And yesterday ran into real weird one when proofing the DVD on a set top. The counter would run wild back and forth between numbers on a section and tons of stutters and stop. So I figured bad burn, tried again and same thing.
Sure enough when I went back to playing in DVD Player on the Mac and in DVD AE it would crash them both. Re-encoding the file cured the ills, but man this stuff gives me stomach aches. Just when you start feeling comforable with workflows and things all clicking, BAM. Kept the bad burn to look at more at some point
But I guess this is what makes ithis all fun

I'm getting an Internal Muxer Error when trying to build a DVD project with still menu images

It originally happened with moving menu content and a help search said it was due to the loop point on a menu being after the end point of the asset but this was not the case.
I've now changed all the menu content to static images and the error is still occurring.

If you want a still image for your DVD menu, click on the Menu in the Outline, then look at the Inspector. Is the Duration set to 0? If not then change it to zero. Also look below that to "At End" and make sure that is set to Still.
Also make sure the image that you imported was a RGB image in either JPEG, TIFF, PNG, or PICT format (PNG would be your best choice), and that the image is SD resolution (i.e., 720x480 for NTSC).

Starting dvd build-compiler internal maxum error

this is the first time that this computer does to me,when I start to build a warning sign COMPILER INTERNAL MAXUM ERROR appear after 1 seconds I click the build not burn yet.I have Final Cut Studio 2
need help please,thank you

Internal Muxer Errors can be from
Common Internal Muxer Error Causes
1.) High Bit Rate of Video (Re-encode at lower rate and/or make audio AC3)
2.) Gaps in the timeline
3.) Corrupted Asset (video)
4.) Improper Markers (You can set to have these fixed on Build in preferences)
If this does not work you can also delete preferences

Interal Muxer Error (Again)

So I'm trying to build a rather large DVD and I'm getting the dreaded Internal Muxer Error. I've read through the other threads asking for help with this problem and turned up nil so far. Hopefully someone can help me ASAP as I'm fast approaching a deadline.
The backstory...I had 23 DVDs that were submitted for a film festival. My job is to create one DVD melt that can serve as a screener for the judges. I used Cinematize 2.0 to extract the .m2v and .aif files for what was to go on the screener. I converted the .aifs to .ac3 with Compressor. Each is about 10 minutes or less. The total size of all the files is 8.69 GB when viewing info in Finder.
When added to DVDSP the total disc size actually says 9.5 GB. I have 2 tracks, with each having about half the clips, so 14 clips and 11 chapters in track 1 and 12 clips/12 chapters in Track 2. I have two menus that link to each of the chapters. Two VTS folders each with a menu and the track it links to.
I know I can't fit the reported 9.5 on a dual layer disc (i have the proper media and drive) but I wanted to create a build of it and then use DVD2oneX2 to shrink it down so it would fit on a Dual Layer DVD+R. Since my build keeps cancelling at about 14% I haven't even gotten this far. I tried eliminating all the chapter markers and that didn't help. Have dumped the PAR folders, nada. Fix invalid markers on build is checked in Prefs. Assets on external firewire, have built to both external and interal with same results. Here is the log:
Starting DVD Build AXE_SCREENER...
Compiler Initializing...
Precompiling Project AXE_SCREENER
Compiling VMG Information...
Created 7 PGCs in VTSM1
Created 6 PGCs in VTSM2
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Compiling Menu#2 (Menu 2)...
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (Track 1)...
Muxing VTS011.VOB
Internal Muxer Error
Build cancelled
Please help! Thanks in advance!

I've begun the process of eliminating assets to find a potentially corrupt one. So far I think I've localized it. It cancels on the 4th chapter, which is the 5th clip in the timeline. After that everything builds okay, so I know there are no problems in my second VTS.
What's the best approach to fix my problematic asset? Hopefully after I do that there won't be other corrupt assets further down the timeline that I find out about. I guess I could add all the other ones in there and see if it builds okay, then I would know if it was completely isolated to that asset. Will try that now and hope it works! I'll be up all night, so if anyone is around, please chime in, thanks!
EDIT: I put my other assets in, minus the 4th one which I think to be corrupt, and it gave me the error again. Now I think that perhaps its not that asset, but anything beyond that certain point on the DVD. What kind of problem might I be having in a specific point on the Track? I know I read earlier something about faulty GOP structure/boundaries and an easy way to fix them. FWIW, the point in the timeline that the build can't seem to get past is around 00:30:48:07. I know frames are irrelevant in DVD spec, but the more info the better I guess.
EDIT #2: Ugh, I just tried making the track ~equal to the length of the failed build, but only using the assets that were in the timeline that built successfully (AKA known to not be corrupt). It cancelled. This gives credence to the idea that its that particular point in the timeline causing the issue and maybe not the assets afterall. Hopefully I've narrowed it enough for someone to swoop in with a fix. hopefully.

Encore CS3 - Build error: "internal software error"

Hi All,
I'm fairly new to Encore but I've spend a lot of time figuring out how it works to the point that I think I've got it (menus, links, etc). Here's my problem:
I've exported a video with chapter points from Premiere CS3 into Encore (no problems). I've created all the menues and links to their respective chapters in Encore (no problems). I "checked" the video. Clean - no errors. I've "previewed" the vidoe in Encore - works perfectly. However, when I go to "build" the video, I get the following error in a pop-up window:
"PGC "Master" has an error at 00;43;38:01. internal software error: %0, line Master - PGC Info: name = Master, ref = Fpgc, time = 00;43;38:01"
"Master" is the name of the timeline that I have imported into Encore from Premiere.
In this case, the time (00;43;38:01) is the very last frame of video.
I've tried building both directly to a DVD burner and just creating a DVD image. Both give me the same error. I've also tried the process by 1) exporting from Premiere to Encore directly and also exporting from Premiere to an MPEG2 file saved on the desktop and then importing that into Encore. Same error, however, the time of the error is different (in one case, the time of the error was some time during the timeline, not the end or beginning).
Finally, a couple of weeks ago during my "learning process" I created a very simple timeline in Premiere with no chapters, exported to Encore and burned it. No problems with that.
Oh, I'm running a 4 year old IBM T41 laptop w/ 2GB of memory. Although not the fastest, I haven't run into any h/w or s/w related issues...yet. I just doesn't scream.
Can anyone provide help here? I'm STUMPED!!
Thanks,
Greg
Redwood City, CA

Some of us experience this pgc error (only in CS3) and have found no real solution. There are a variety of workarounds. I believe the most persistent version is the result of some unidentified combination of hardware and software.
I believe that there are 3 variations, and they may have different implications: timelines (your issue), motion menus, and slideshows.
Copies of projects and assets taken to a machine/user who does not experience the error work fine. Some users have done a ridiculous amount of testing (I'm one), and some have declared a solution (I am not one, and believe there are probably multiple causes). Since CS4 is out, I doubt we will ever see any further resolution, and, since the problem can not be reliably repeated in a new project with new assets, no "bug" was ever demonstrated.
The first rule is to use flawless workflow. (I don't find a link right off to Neil Wilkes' and Jeff Bellune's descriptions, but one example is never changing assets with Encore closed.) But I have instances in which I was perfect (ha, ha), and the error occurred.
In most instances, one or more workarounds can be used. If you used a muxed file, do it again with demuxed. If you used files that were in the same folder as the xmpses files (the files premiere creates to carry project/chapter info), delete the files other than the m2v and wav and reimport the asset as a timeline. (You will have to redo the chapter markers. It is best to delete the old file from the project, and have the newly imported file renamed. However, I have done it various ways successfully.) If you have long file names with spaces, shorten and remove the spaces.
You report one version of the error in which the time location is in the middle of the asset and not a frame or two from the end. This is not common for the persistent version of this error, and raises the question as to whether there is an actual problem in your asset.

Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530

I am trying to make a movie and burn it to a disk for school but I keep getting that error (Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530) It occures after about 5 or 10 minutes of transcoding. The original file was a mkv file format with a dts audio and a avs video track.
Here is the detail of the video.
Format                           : Matroska
Format version                   : Version 2
File size                        : 6.56 GiB
Duration                         : 2h 10mn
Overall bit rate                 : 7 197 Kbps
Encoded date                     : UTC 2011-10-26 03:46:55
Writing application              : mkvmerge v4.8.0 ('I Got The...') built on May 24 2011 03:12:58
Writing library                  : libebml v1.2.0 + libmatroska v1.1.0
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 5 frames
Muxing mode                      : Header stripping
Codec ID                         : V_MPEG4/ISO/AVC
Duration                         : 2h 10mn
Bit rate                         : 5 689 Kbps
Width                            : 1 280 pixels
Height                           : 528 pixels
Display aspect ratio             : 2.40:1
Frame rate                       : 23.976 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.351
Stream size                      : 5.05 GiB (77%)
Writing library                  : x264 core 119 r2106 07efeb4
Encoding settings                : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=5689 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language                         : English
Audio
ID                               : 2
Format                           : DTS
Format/Info                      : Digital Theater Systems
Muxing mode                      : Header stripping
Codec ID                         : A_DTS
Duration                         : 2h 10mn
Bit rate mode                    : Constant
Bit rate                         : 1 510 Kbps
Channel(s)                       : 6 channels
Channel positions                : Front: L C R, Side: L R, LFE
Sampling rate                    : 48.0 KHz
Bit depth                        : 24 bits
Compression mode                 : Lossy
Stream size                      : 1.38 GiB (21%)
Language                         : English
Knowing that Encore does not support mkv I demuxed the mkv taking out the video track into a .h264 file using mkvextract. I then muxed it into a mp4 without the audio using mp4box then dragged it into encore without any problems. For the audio, I just demuxed it out into a dts and dragged that in as well. I then created a new timeline and dragged each peice of media into there corresponding sections on the time line. I tried to play the video but there was no audio. I treid to import the dts and got a warning saying something like, "DTS is supported in this version of Encore (CS5) but just not in preview. When I burn it to the disk there will be no problems" So I just went ahead and tried to build the video into a dvd folder for a dual layer disk.
The setting I have for the DVD is default except I changed the bitrate to 9.4mbps. That's the only thing I changed. (I used NTSC)
I played the audio using an external player to see if it plays and it did. When I check to see if there is any problems with the build it only says something about start remote and end action. I have never set them before so I don't think that should matter.
I have Encore installed on my secondary drive (Not C: which is windows) and I treid to create the DVD Folder on that drive. When I got this problem I just thought it was that it could not create the files on the drive because the program isn't running off that drive which it should be, I treid to create the DVD Folder on the C: drive and I still revieve the same error.
Does anyone know how I can get past this? I need this to be done by tomorrow for school in the morning.

Hi Stan and thank you for your concern, I was (I am) getting that in a timeline. and also a kind of general error when I was trying to build ether a folder or an image. I had made a copie of the project for me to delete all menus I also change all "end actions" who were on "stop" configuration but still my problem was there. In this project in encore two things I did witch may be the coz ot the problem?
-first when changing the menu styls and edition with Ps (maybe I did some thing wrong there?) and
-second when changing throught encore the markers on my principal time line witch maybe a did in a wrong way.
whatsoever thank you and sorry that I took a long time to answer, regarding my english writting you allready undertand that it is not my language. In addition I'm not a professional in editing but I'm still learning. I think it will be quiker for me to do the project again till the start on encore even if for me it wood be good for to know where the problem came from for me not to do it again.
Thanks a lot best regard
Fabian

500 Internal Server error for a single report in a dashboard

Hi All,
I had an issue with a report in a dashboard i.e.., In a dashboard a report is prepared by using the opaque view. When I ran the report in a dashboard it ran for about 15 to 20 mins and the report is excuted with the data. Now I tried to downlaod the data for that particular report into the excel sheet by using the option Download to Excel. At this stage after 5 mins I am facing the Internal serevr error. But strange behaviour is that it downloads sometimes and sometimes it does'nt. One more important thing is that I tested the query in backend and it took around 6 to 7 mins to fetch the data. The total no of rows for the query is only 166. So can anyone please give me some suggestions or we can have a discussion as this report is behaving strangely. One more thing I forgot to mention is that they used session variables as parameters in the query for two fields which they used in the opaque view to build that report.
Thanks,
Sandy

Hi Arun,
where can i check with that whether in DEV/PROD system...?
I don't have access to PROD system and SU01 system too.
Can you please guide me with the steps to get it done.
Please check the below log which is getting displayed for the User, when he is logging in.
Error summary
While processing the current request, an exception occurred which could not be handled by the application or the framework.
If the information contained on this page doesnu2019t help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUSage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java.245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
u2026 59 more
Please provide me any help.
Thanks in advance.
Regards,
Ponneswari A.

500 Internal server error while running sqlsrv_query in PHP

Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.

Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error 500--Internal Server Error while opening a taskflow in inline popup

Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
     at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
     at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
     at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
     at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
     at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
     at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KK

Hi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK

500 internal server error while deploying a Web Dynpro application

Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet Vikram

Hi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram

"Internal Muxer Error"

Similar Messages

Maybe you are looking for