Internal no range in BAPI_MATERIAL_SAVEDATA
DEAR FRIENDS,
I am working with creation of material master with BAPI_MATERIAL_SAVEDATA. material is createing but it is taking external material no, but i have to proceed with internal number range.
can any one help me where and how to proceed for that. is the any filed that we have to pass X to make internal and external?
thanks and regards,
venkat suman.
Documentation of BAPI_MATERIAL_SAVEDATA.
Only external number assignment is supported for the material number
(MATERIAL). If you want the material number to be assigned
internally, the method BAPI_MATERIAL_GETINTNUMBER must first be
called. This method determines an internal number for the material
to be created. You must enter this internal number in field
HEADDATA-MATERIAL.
Similar Messages
-
Create material master using BAPI .(Mat. internal number range)
I would like to create the material using BAPI. (Material is internal number range).
I am trying to create the material using BAPI BAPI_MATERIAL_SAVEDATA, but material number is required field as per BAPI documentation .
Can you please suggest me the function modules or BAPI to load materials which are in internal number range.
Regards
BadariHi ,
Use FM 'MATERIAL_NUMBER_GET_NEXT' to get next available material #.
You can use that material # in BAPI 'BAPI_MATERIAL_SAVEDATA'.
Cheers,
Vikram -
Partner Function in Vendor Master With Internal Number Range
Hello Friends,
I am creating vendor master record with internal no range.I wanted following clarifications.
1.In partner function screen, I want to have same vendor no which i am creating to be assigned automatically to VN.OA PI and GS funtions at the time of its master creation.This is not happening in my case
2.Partner function like VN,OA,PI and GS does not appear automatically whereas i have to select it manually.
Regards
VivekHi,
During defining the partner Schema, please follow the process:
a.Create partner Schema
b.After creation of partner Schema, select your partner Schema and click u201Cpartner roles in schemau201D and you will have next screen
Now for Partner function like VN,OA,PI and GS as you required and select the check box of mandatory
and save.
Now try creating Vendor and you will have Partner function like VN,OA,PI and GS in vendor master.
Note: The following configuration steps for Vendor master are:
1. Create Vendor Account Group.OBD3
2. Maintain Number Ranges from Vendor account Group:XKN1,
3.Assignment of Number ranges to Account Group,OBAS
4.Partner Function: SPRO->MM->Purcahsing->Partner Determination-> partner roles->Permissible partner role sper account group
5.Partner Schema:
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Define partner Schema
6.Assgin partner schema to accont Group
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Assgin partner schema to account Group
Regards,
Biju K -
Create vendor in ERP R/3 with internal number range
HI,
When I create a new vendor from MDM in R/3 with internal number range ADRMAS is processed OK but CREMDM is in status 51 because of missing address data.
According to sap note 1052964 (se below) ADRMAS must be the first IDOC and it should contain the vendor number, but this is not possible with internal number range. How do you overcome this problem and how do I get the vendor number back to MDM?
ALE inbound needs the customer / vendor account number within the ADRMAS IDoc to link the ADRMAS IDoc to the follwing DEBMAS / CREMAS IDoc correctly. Therefore field <OBJ_ID> in ADRMAS segment <E1ADRMAS> must contain exactly the same value as fields <KUNNR> / <LIFNR> in the corresponding DEBMAS / CREMAS IDoc. If this value is not provided, the Business Address Service stores the address but is unable to link the address later on to the corresponding Customer / Vendor.
Kind regards
JonnaWe have worked around these problems in the past. These are the steps we took:
1. We created a custom program to process a CREMDM IDOC. This custom program was pretty simple. It called the function module to process a CREMAS IDOC (IDOC_INPUT_CREDITOR) then did a committ. The program captured the vendor number and then called the function module (IDOC_INPUT_ADRMAS) that processes an ADRMAS IDOC (It plugged in the previously captured Vendor number in the ADRMAS).
2. Using this custom program, it is not necessary in PI to split the CREMDM into a CREMAS and an ADRMAS.
3. The last step in the custom program kicked off transaction MDMV to trigger an outbound CREMDM IDOC back to MDM. This was necessary to update the vendor number in MDM.
Tom Belcher -
Internal Number Range in Vendor Master(XK01)
Dear Gurus,
During the Initial upload of vendor master in SAP the vendor codes around 3000 vendors were uploaded with an External Number range between 1000000 to 1999999 with an defined group. Now i want to deactivate the External Number range and move on to internal Number range.
With Regards,
Siddharth PosteHi Siddarth Poste,
In OMSJ T- code you can give the vendor no range as internal or external
Regards
M B Raju -
Internal Number range:Issue
Hi,
I am using the internal number range for the employee number creation.
Scenario:
Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
I am able to delete the record (all the associated infotypes) successfully.
Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
I want the new correct employee to have the employee number as 00000013.
Can you please advise?
Regards
ManishGo to Tcode PA04
Click the Status Delete 0000014 Current Number make it as 000013 and hire -
Billing document Internal No. range unable to be trasported to quality
Hi SAP Gurus,
I am unable to transport the changes to quality from develoment.i have made an internal number range assignment to the billing document type Debit note ZL2 equal to ZF2 normal invoice.
I am not defining any new n.range assignment but i am assigning the similat no.range interval to the debit note doc type and wanted to transport to quality but i am unable to see the changes transported quality why????
Please help me soon its urgentIt is only the Number Range Object, which is transported in Billing Type (VOFA) & not the number range, which can be Transported. It has to be maintained through T.Code: VN01 for the number range object (Add the number range object, if it is not available in the list in VN01). As a rule, Number range cannot overlap, so it is essential to have number range made available for the Number Range Object. Incase of Billing, most commonly used is Number Range Object 19.
Regards,
Rajesh Banka
Reward points if helpful -
Account group with Internal Number Range
Hello Gurus,
With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
Please correct me if I am wrong and suggest a solution.
Thanks in AdvanceHello friends,
No error message but the next number is getting allocated.
in VD01 or XD01
the following steps r followed.
1. Enter the Account Group
2. Sales Area (New Sales Area for the customer)
3. Reference Customer.
4. Reference Sales Area.
Rather than going to the sales area directly, General area screens are appearing.
Upon saving saving the details New customer number is getting allocated.
I have no clue where I have gone wrong...
looking forward for suggestions.
Regards -
Vendor Creation (Internal Number Range)
Hi,
My client was creating a new Vendor. The same has an internal number range.
However, the last vendor created was 110016...... while creating a new vendor, the system assigned vendor 110020 as the next internal number, instead of 110017 to be assigned.
Kindly assist as to why has this happened and where can i check the same?Thanks.......
However that number range has not been assigned to other vendor group....
Also, I have heard of number range buffering in SAP......What is that? How it works? Is there any T Code to check this buffering or any additional configuration is required?
Kindly assist on the same........ -
Hi All,
I have defined the internal number ranges and assigned to vendor account group but when i create a vendor master record the system allocating number randomly instead of serielly
why this is happened ?
Regards,
RajeshHi,
You may have Number range Buffer for Vendor No Range.
goto T.code SNRO and check for Vendor number range.
Hope this helps, please assign points.
Thanks,
Rau -
Assingment of Internal Number Range to different type of Maintenance Order
Hi..
We are implementing SAP Plant Maintenance. We have created 10 order type. We want to assign 10 number ranges to the order types. During "Configuring of Number Range" t.code OION , when I am inserting new groups for all 10 type of order, it is not accepting by the group name. Number range which i am giving to the desired group is saved in other groups.
Can anybody help to adopt the right process sothat I can assign the correct internal number range to different order types.
Thanks in advance.
Regards
TPHi Pramod,
Please follow the procedure mentioned below:
Configure number ranges.
1. In the menu bar go to Group & Insert
2. Enter the Text & the interval i.e number range.
3. Now add the new group using the symbol ( + )
4. once this is done the new group will be reflected.
5. Then select the element ( order type) i.e to be assigned using F2 key.
6. Enable the check box against the new group ( respective group)
7. Now in the menu bar press Element/Group tab ( or Use F5 key)
8. The selected element(order type) will be assigned to the particular group that you have
selected.
Hope this will help you resolve the problem.
Thnaks & Regards
Arun Vijay D -
Hi All,
Please help to find out why system does not assign continuous running number for new sold-to-party account group.Why Internal number range of sold-to-party assigned by system not in running sequence.
Thanks & Regards,
PallaviHi pallavi
Go to OVT0 and select the sold to party account grp and and in that details you can see the number range field ,there you can check what number range has been assigned to the account group. Another way is go to OBD2 and check the sold to party account grp which number range has been assigned
Regards
Srinath -
Internal number range( alphanumberic) will be incremented automatically
Dear All,
Will the internal number range (Alphanumberic) of the material master get incremented automatically.
say,
the internal number range we set is AW0000001 to AW9999999. The number range should be incremented
Kindly reply for the querry
Thanks
BakyarajYou can try with material Template.
SPRO --> Logisitics - General -- > Material Master --> Basic Settings -- > Define Out put format for Material Numbers.
Transaction Code : OMSL
Activities
1. Define the length of your material numbers.
2. If required, define a material number template.
3. Specify the form in which you wish to store your material numbers.
For information on how to use the Lexicographical indicator, be sure to read the corresponding documentation.
4. Specify whether your material numbers are to contain leading zeros.
Note
If the Lexicographical indicator is set, the system ignores the setting of the Leading zeros indicator.
Indicator for lexicographical material numbers
Definition
Defines the way numeric material numbers are stored in the database.
Use
Caution
It is only possible to set or reset (cancel) this indicator if no numeric material numbers have been used yet in the system since they would no longer be interpretable after setting or resetting this indicator.
If this indicator is not set, numeric material numbers are padded with leading zeros and stored right-justified (example 1). Material numbers containing at least one nonnumeric character are stored left-justified (example 2).
Example 1
Defined length: 8 characters
Internally/externally assigned number: 123
Stored number: 000000000000000123
Example 2
Defined length: 8 characters
Externally assigned number: 1A3
Stored number: 1A3
If this indicator is set, material numbers are stored as follows:
If the material number (numeric or not purely numeric) was assigned externally, it is stored left-justified as entered.
Example
Defined length: 8 characters
Externally assigned number: 123
Stored number: 123
Note
Any leading zeros that may have been entered are stored too. This makes it possible to distinguish between the material numbers 123 and 0123.
If the material number (numeric only) was assigned internally, it is padded with leading zeros to the defined length and stored left-justified.
Example
Defined length: 8 characters
Internally assigned number: 123
Stored number: 00000123 -
hi,
some body tell me the transaction code for copy of the Internal Number Range for EWT from one year to another year
regards
sapfanHi,
use t.code:J1INUMBER for internal challan number creation, u can't copy from one year to another year.
regards
sai krishna -
Copy of Internal Number Range of extended withholding tax
hi,
Can any one tell me the transaction code for copy of the Internal Number Range for extended withholding tax from one year to another year
points will be assigned
thanks in advancehi,
use t.code:J1INUMBER
all the best
Prasad
Maybe you are looking for
-
% Change is not giving correct results.
Hi, I am using Ago Function to calculate Current month cx count , previous month cx count, present month acct count, previous month acct count and in the report parameter selecting Reporting Month as DEC 09. The results are coming perfectly fine... b
-
X3-02 Backlight & Keypad Problems
Hi all Have got a Nokia x3-02 which is about a year old now and noticing a few problems that have come up. The 2 main problems I am having are... 1 > The LCD backlight doesn't turn off or "dim" after locking or after not using for a few minutes. I ha
-
Problems with 3D features in CS6 Extended
Hi, When I attempt to extrude some text in CS6, there is no ground plane, no widgets, no viewing panel and none of those fancy grab handles that are meant to be there. The move, scale and rotate for 3D tools have a 'no entry' sign when I attempt to u
-
Unique Requirement regaridng SY-UNAME
Folks, We have been on SAP system for 10 years. The SAP login user name till this point are made up of names. Now they want to change it to alpah numeric one that includes personnel number. Almost all the transaction data in SAP records the created b
-
I have an iMac 2.66 GHz Intel Core 2 Duo computer and have to update my system software from Leopard V 10.5.8 to OX Snow Leopard V 10.6. Where do I find it?