Internal or External Hard drives for MacPro and Final Cut Pro Suite

We are purchasing a new MacPro with Final Cut Pro Studio to edit High Def video (1080x1920) in a professional sports setting. Initial storage will equal 12 TB. I've always felt original internal hard drives are more desirable: higher quality, fully compatible with Mac, and faster I think. Others feel that external storage is "safer." Should we get a MacPro with 8TB internal or go with all external? What are the advantages/disadvantages with each? Thank you very much in advance.
LifeisRich

A hard drive is not going to change.
An external case has its own PSU and cooling.
SATA II is not going to change.
"Sharing" one channel for multiple drives is the only way it would be slow, using Port Multiplier.
There are very nice rugged storage racks for 8-12 drives and $600 range controllers. Take a look at what Fibre Channel offers. What the Apple XRAID once was.
I'd put the system on 10K 600GB WD probably, and not worry too much about internal storage. Also, you say "initial storage" so that assumes your needs are in the 20TB and you never using more than 60%. A good RAID can maintain performance to higher %.
Disk drives have made port multiplier less useful until SATA III chipsets arrive.
http://www.macgurus.com/productpages/sata/BurlyPortMultiEncl.php
http://www.macgurus.com/productpages/sata/BurlyRAID.php
The quality of the drives, buying 'spares' as well.

Similar Messages

Best speed External Hard Drive to use with Final Cut Pro X ?

Hey all
I'm looking at getting a new USB 2.0 external hard drive to use with FCPX, I was wondering what everyones thoughts were on minimum speeds and what everyone else uses.
I am looking at least 1-2TB.

I will warn you now that I am somewhat of a lone voice on these forums for recommending USB 2.0s.
I have used the 7,200rpm types with their own mains supply over the last 6 years (and exclusively for the last 3) and had no problems of any kind.
Having said that I am not a pro with tight schedules (or underwear!) but I have used DV, HDV, AVCHD with and without ProRes and AIC.
Most of my projects are short though I have done a number of 2 hour projects with comparatively simple editing and a few effects etc. One ongoing project has some 12 hours of DV which I dip into occasionally.
I have a couple of LaCie FW HDs which I stopped using a couple of years ago in favour of the much cheaper USB 2.0s and didn't notice any difference, though as I said I don't have pro time constraints.
Now is not the best time to buy HDs cheaply as the autumn floods in Asia knocked out many of the main suppliers, prices doubled overnight and have still not got back to last summers figures (2TB WD Essential £69 with free delivery).
Look at the price now!
http://www.amazon.co.uk/Western-Digital-Elements-External-Desktop/dp/B003IPC21Y/ ref=sr_1_11?ie=UTF8&qid=1330504588&sr=8-11

I found information on how to transfer my library to a new computer. I am going to use an external hard drive for this and transfer my itunes folder to the new computer. I will then download and install a new version of itunes on my new computer. My q

I found information on how to transfer my itunes library to a new computer. I am going to use an external hard drive for this to transfer my itunes folder to the new computer.
I will then download and install a new version of itunes on my new computer.
My question is this. When I do this, will itunes have all my album artwork for all my library? My library has a lot of my own music and I have spent quite a bit of time copying album artwork that itunes did not add. I am really hoping I don't have to do this again!
Thanks for your help!

If you follow the directions in this Link...
Copy iTunes to an External Drive
http://support.apple.com/kb/HT1751
Everything should be carried across...

My external hard drive for backup and Time Machine is full. I bought a new HD. Can I just begin using it, or must I transfer old BkUp and TM to the new HD?

My external hard drive for Back Up and Time Machine is full. I bought a new HD. Can I just begin using it and rely on the old HD for past Time Machine versions, or must I transfer the old Back Up and Time Machine files to the new HD?

It is your choice.
If you don't want to be able to far back into the time slots covered by the old disk then just start using the new disk.
If you want to retain the ability to go back into those time slots then copy it.
Allan

External hard drive for iPhotos and itunes

I want to move my iPhotos and iTunes libraries to an external hard drive. What are the best external hard drives for a
1. iMac running OSX Yosemite version 10.10.1
2. MacBook Air (I actually want to store my iPhotos library stored currently on my old macbook pro to an external drive but access the library with my new MacBook Air.

My personal preference for EHDs are these: OWC Mercury Elite Pro. I have 6 of them and have no problems with any of them. Be sure to format any drive you get to OS X Extended (journaled) with ownership set to be ignored.
To copy the iPhoto library to the EHD just drag the iPhoto Library package from your Pictures folder to the EHD. When the copying is completed launch iPhoto with the Option key held down and select the EHD library to open it. Once you've confirmed that the EHD library is good and working as expected you can delete the library from your Pictures folder.
Ask in the iTunes forum on how to move the iTunes library.

External hard drive for Mac and Windows?

Hey all,
Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

Rekishika:
Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
Axel F.

I want to format a Seagate Expansion External Hard Drive for Mac and PC

I ordered a Seagate Expansion 2 TB USB 3.0 Desktop External Hard Drive to use with my new Mac and my old PC (or at least get my photos off of both and put them on the drive). I thought all HDs could be formatted to use by both, I was able to get a Mac HD to work with my PC in 2008 (but it died). I am reading that this drive is PC only. I have Parallels and Windows 8 on my Mac if worse comes to worse but I would like all of my computers, real, virtual old and new to be able to access the external drive. Has anyone encountered this issue before? What should I format it in? FAT32? If yes, how would I go about that on a Mac. Or should I just return it?
I'm kind of Mac clueless. I spent my childhood through college on a Mac but I graduated right when OSX came around and I don't know how to work with the Mac "under the hood" like I did with OS9 and with Windows. So please talk to me like I am an an adult idiot.
Thanks!!!!

The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

External hard drive for PC and Mac, how to format?

Hi
I have 3 laptops at home which I use for different roles:
1. A recent Macbook Pro with Leopard;
2. PC with Windows XP SP2;
3. PC with Windows Vista.
I have just ordered a powerful external drive (actually four drives of 1TB each in one enclosure, configured into the fastest RAID 0 for my work and storage needs.
I will need to edit High Definition movies directly from that hard drive, so I need to have very fast access to all files (up to 100MB/s - have eSATA connections sorted).
Now my question is how should I format the hard drive so it is read and write accessible by all three computers?
FAT32 is not an option because it has performance issues (and I need my HDD to be really fast) and wouldn't support files larger than 4GB (many of my videos are larger)...
I probably also cannot create 2 separate partitions as I need to use the same files with both Mac and Windows systems (not at the same time but e.g. download a 10GB file with my Vista computer while I am away, later edit it with MBP, then maybe record it onto a blu-ray in my Windows XP machine.)
I am sure there are many people out there with both Macs and PCs that need fast external hard drive where FAT32 is not good, so how do you format it?
Many thanks!

Hi,
if what you are looking for is a 4-disk-raid NAS with e-sata connection, you are looking at US$1000 (without drives) for something like the Allnet ALL6700 or the QNAP TS509pro which can use a 5th disk for raid-5 redundancy. (With a 4-disk-raid-0, the chance of losing ALL data is 4 times higher than when storing on a single disk)
With many NAS-devices, you don't have to worry about the format/file system - as capaho wrote, the box does it for You (don't take my word for it for a specific model). My DLink Nas ist Ext3-formatted and runs fine with OS X and/or XP - but can only be connected via LAN.
If you have connected it to a switch/router and you are accessing it via LAN, don't expect a transfer rate of more than 20MByte/s (Gigabit-Lan) unless using professional equipment.

Partitioning an external hard drive for Mac and PC

I want to partition an external hard drive (3TB) into 3 even partitions. I want to use one for PC storage, one for Mac storage and the last for Mac backup. Is this possible and how do I do it?

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Re-partition the drive to create the three partitions. The one you wish to use on a PC you should format MSDOS (FAT).
When you connect the drive to your PC it should have no problem reading the partition set up for a PC. Now while on the PC you may wish to consider reformatting that partition using ExFAT (if supported on your PC.) This format is more compatible with both OS X and NTSF supporting long file names and other FAT filesystem irregularities.

Same External Hard Drive for Mac and PC?

Hello,
I just bought an iMac and a Lacie external hard drive. I plan to format the Lacie for the Mac. However I'd like to use it to tranfer my files from the PC. Will the Mac formatted Lacie External Drive work with both the iMac and the PC?
Thanks!
Jim

Another alternative is to get a Lacie drive and use it native to MAC. To acess read/ write capacity to your NTFS partitions refer to my post in:
http://discussions.apple.com/thread.jspa?threadID=1425010&tstart=0
regards,

External Hard Drive for Mac AND PC

I need to purchase an external Hard Drive to be able to back up both my iMac and my partner's PC. I am currently looking at buying either:
Iomega UltraMax Hard Drive 500GB FireWire 400/USB 2.0
OR
Iomega 500GB Minimax Hard Drive with Dual Interface + USB/FireWire Hub
Can anyone tell me is it possible to format either of these Drives to be able to accept both Mac and PC, and if so, do either of these drives let you have a permanent connection to both at the same time, so they can be set up and left to do their backups automatically without always swapping cables over etc.
Does anyone have a preference between these drives?
(Oh, and for info, I won't be using Time Capsule as I only have 10.3.9!)
Thanks

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

How to format an external hard drive for vista and snow leopard?

I want to format an external hard drive to attach to Airport Extreme base station to us with Snow Leopard and a PC with Vista. What format should I use for read/write access for both?

I use NTFS for my external drives being used on both Macs and Windows. To get the Mac to write to NTFS, you need a separate program. I use Paragon for Mac software. It works behind the scenes. There are also some free things that do the same thing but I found them cranky and unreliable. YMMV.
Windows can not read any of the Mac disk formats without additional software.. FAT32 is fine but is extremely limited.
For the last year, I have had absolutely no problems on any computer, Mac or Windows.

External hard drive for pc and mac

How can I format my external hard drive to use it with both my pc and mac without deleting everything that's already on it?

No. The process of reformatting the drive wipes out all data on the disk drive.
Allan

"How to partition for an external hard drive for windows and Mac backups"

I have two PCs, Dells, and 1 Macbook Pro. They are set up on a wireless network. I would like to set up an external hard drive to backup all three automatically. Does anyone know how I can do this? Do I have to partition the external hard drive?

You would need to partition the hard drive using the GUID partition scheme. Your non-Apple machines would need their partitions formatted MS-DOS (FAT) and the Mac partition would have to be formatted Mac OS Extended. Note, however, that using the MS-DOS format may cause some problems with filenames on an NTFS formatted Windows drive.
Now you could use Mac OS Extended formats on all three partitions, but then you would need third-party software on your Windows machines to enable them to read and write a Mac-formatted drive.

Formatting external hard drive for MAC and Windows

I have an external hard drive that I would like to make compatible with BOTH Mac and Windows. I don't want to split it but is there any way that I can make it compatible to where I can use it back and forth between both? I have classes and use Photoshop on both systems and need to be able to read and write to the hard drive from each system. Please let me know if this is possible and how? Thanks

I have a 500GB external HDD which I had to format o Fat32 a while ago. I don't remember exactly how I did it, but I remember it was a pain in the *** and took forever (I was under Windows XP).
So short answer to your question is yes. It is possible and as the above person said, you need to format to Fat32. Long answer is it will take some time and effort. Here are a few links to help you get started:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
http://macosx.com/forums/mac-os-x-system-mac-software/270038-format-new-hard-dis k-into-fat32.html
http://en.kioskea.net/faq/sujet-676-formatting-your-drive-with-fat32
I haven't tried any of these (I believe I formatted mine downloading a third party app), but you might be lucky. Good luck.

Internal or External Hard drives for MacPro and Final Cut Pro Suite

Similar Messages

Maybe you are looking for