Internal Order - control data tab

i have an io that has cost center as statistical .  so anything that posts, is first posting to the IO and 2nd posting statistically to the cost center.  If i want to change the cost center, i can do that on the assignment tab BUT that cost center doesnt update the control data tab--which is where the stat posting goes.
is this something that can be changed or does a new IO need to be created?
thanks!

Hi
To change the cost center in the control tab of internal order master apply OSS Note 198036.Note that the cost center given here have the real postings and the internal order have the statistical postings.
Regards
Sandy.

Similar Messages

  • Production order control data tab

    Hi,
    Is there any chance the costing data under control data tab in production order can make out "grayed" so that users can not change costing sheet, RA key.
    Thanks in advance.

    Dear Sprint,
    Try with SHD0, make the field as display only
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [http://sapfunctional.com/General/ScreenVariants/Index.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm]
    If possible take help from technical person
    Regards
    Madhu

  • Plan settlement button in internal order master data

    Hi,
    when I create an internal order, in the screen doesn't appear the button " Settlement plan".
    Do you know why?
    Could you help me?
    Thanks in advance
    regards

    Hi
    Go to "control data" tab. of the internal order and select the check box "Plan Integarted order".
    Then you will be able to see the plan settlement tab.in the settlement rule sceen.
    Regards

  • Default Results Analysis Key in Internal Order Master Data

    Hi Expert,
    I would like to default specific Results Analysis Key in Internal Order Master Data.
    Please advice is the any configuration can perform that?
    Results Analysis Key is under Period-End Closing tab (Internal Order Master Data)
    Thanks
    regards,
    ng chong chuan

    HI
    1. Go to T code KOM1 > Order Type would $$
    2. CReate an Order and maintain default values in it like Comp code, etc and also the RA key
    3. Now, maintain this model order in your Order Type in KOT2_OPA
    4. Transport this customizing request across to all clients
    BR,Ajay M

  • IW32  control data tab cost varaiant actaul and cost varaiant planned field

    Hi Team,
    In my preventive maintenance order , in control data tab cost varaiant actaul and cost varaiant planned field is not avialble it is hidden , but comming in PM01 order tye.
    Tcode OIAN for preventive maint. order type
    Cstg variant actual CAUFVD-KLVARI             
    Cstg variant planned CAUFVD-KLVARP
    Input indicator is selected.
    What may be the reason.
    Thanks in advance.

    Hello,
    I already ran the report Z_FILL_COSTING_VARIANTS and after that I will go to calculate costs in the order but nothing. I this order I already had confirmations but when running the cost calculation the system doesn't made the calculation.
    Can you help me?

  • Hide XD02 Screen field Tax Number1 in control data tab

    Hello,
    I want to hide field Tax number 1 from the XD01/2/3 - control data tab, based on authorized / unauthorized user check.
    Please let me know the screen exit for that or how to hide it ?
    Thank you,

    Hi,
    I think that you will need to use the enhancement point mf02dfd0_01 spots es_mf02dfd0 in INCLUDE MF02DFD0. An enhancement at this point will allow you to loop through the screen fields and set the Tax Number 1 field not active in the PBO stage of the screen. I didn't see a user exit that would allow you to do the same.
    Regards,
    John

  • Internal Order master data change

    Hi all
    My requirement is to change cost center and profit center in Internal Order master data using KO04. In my project cost center and profit center are same. I am able to change and save but my question is...
    How come History(Posted transaction) of cost center and Profit center can be transferred to new CC and PC?
    Is it possible?
    Please help.
    Thanks
    Hari

    Hi, Hari:
    Do you mean Manual Reposting of Costs ?
    You can try KB11N for Cost Center.
    Best Regards, Lawrence

  • Screen/ User Exit for Internal Order Master Data

    Hi,
    I would like to one more field in Internal Order Master Data in TC KO01. I know the Table AUFK and i know there is one Include Structure (CI_AUFK). but i dont know how to add the field in that.
    if you go to Screen Exit COOPA003.  There is a Structure like CI_AUFK Structure there is no Calling screen in SMOD.  
    Can anybody please let me know how to do that?
    It's really really very urgent.
    your help would really appriciate.
    Thanks,
    Dhaval Shah.

    Hi Chandra,
    Thanks for the reply, can you please let me know from which TC i have to do. and i will be really appreciate your help  if you write down the whole process.
    Because i am aFunctional Person and i am using this Screen Exit for the first time so i'll be really thank ful to you.
    Thanks,
    Dhaval Shah.

  • How to restrict Internal Order master data changes

    Hi Experts,
    We have internal orders that have no Functional Area assigned to it at the beginning of the month, but part way through the month a change is made to the master data and a Functional Area gets assigned to the internal order.  When settlement is run at the end of the month, part of the internal order has a FA blank and part of the internal order has a FA of OPEX or G&A depending on what was assigned in the master data.  This causes an issue because they don't offset.
    Typically if no change was made to the master data during the month, all the transactions to the internal order with FA blank would offset and there would be no issues on settlement.
    So, how can we control in the system that does not allow changes?.
    Thanks 
    Sanju

    Hi Sanju
    If FA is not needed at all in the IO- hide that field in the order type screen layout.
    Otherwise, restrict the authorization to someone who understands the criticality of it
    Last resort, implement user exit which won't allow to add FA if transaction data exists. You can search for the exits as COOPA* in SMOD
    Br. Ajay M

  • Mandatory field in sales order additional data tab

    Hi,
    I have added an extra field in additional data tab of sales order. 
    How can i make this field as mandatory for certain sales organisations ?
    TIA

    since it's conditional, I think I would add code in SAVE_DOCUMENT_PREPARE subroutine in MV45AFZZ, based on transaction code, prior values (YVBAP) and current values (XVBAP), and issue an error message, allowing user to return to the screens displaying Item table control, when the field is not properly populated.

  • Production Order Master Data tab

    Hello Guru,
    we have question, in the production order itself, in the master data tab we find weird thing, in the production version it pick PV01 (has inactive bom), in routing field all was been filled up, while in the BOM field it was been blank? why this happen? is it possible BOM is not explode since it was inactive but it create production order?
    I doubt that there were changes occured some where in the BOM or in the material master data of my material but in doc changes i cannot find, is there any way deside looking at the mat doc changes could i find the changes?
    thanks
    Edited by: Ryan on Dec 15, 2008 9:42 AM

    Hello Guru,
    I finally find why this happen to us, the order come from a planned order which converted via CO41, but why thus when i production version was indicated in creating a planned order (MD11) which has alt bom that is in inactive status already, SAP allows the conversion/creation of production order?
    Any inputs R.Brahamankar?
    Thanks
    Edited by: Ryan on Dec 15, 2008 12:09 PM

  • Modification in Internal Order Master data

    Hi
    Is there any way in which I can make a change in the master data of Internal Order after it has been created and saved and entries passed in SAP using this internal order? T Code - KA02 does not allow to make any changes other then that of description. I basically want to change the Business Area in the Order Master Record
    Regards
    Sanil Bhandari

    Hi,
    You cannot change the business area once costs have been posted to the order.
    Regards,
    Murali

  • Internal order master data

    Hello All,.
    Is there a way that we know that an internal order is not assigned to any internal order groups?
    e.g.  In our company we have internal order 1 to 1000 each one of which is assigned to order groups G1 through G10 and I need to check if order 550 is assigned to any of these groups?
    Any database table to check this?
    Thanks a lot

    Hi!
    Internal Order Master Table is AUFK. You can look up this table for any Internal Order with Order Type = blank.

  • Internal Order control in SD documents

    Hi All,
            Here is the case i come across, would like to have your opinion.
    Every year, budget is allocated for promotions. Marketing team is allowed to introduce various schemes within this year, but it should not exceed the assigned budget. Hence created internal orders(KO01) & flown the funds into it(KO21).
    Internal order-IO001 = USD 1000
    based on promotions intrduced Mtkg dept will either issue FOC or Credit note to the eligible customers.
    in case of FOC, system considers Material cost as part of budget
    in case of Credit note, Base / selling price is considered as part of budget, end of the year / while issuing FOC / Credit note, if document value exceeds the allocated budget, then system should trigger error message & stop issuing FOC / Credit Note.
    ( same is available in FI, when issuing Credit note Tx:FB70 against Internal order)
    where as same is not happening in FOC order / Credit note against Internal order.
    if anyone come across this case, let me know, how it has been resolved either through customization or userexit? But according to me, SAP has given provision for this.

    thread is duplicated . will continue with the other thread by closing this thread

  • Apportionment Structure -In Control Data Tab of Process Order

    Dear Gurus
    How we can enable Apportionment Structure in Control Tab of Process order. In the drop down menu list i can see the Material / Plant / Appont str in the field of Apportionment Struct ( But it is disabled ) .
    Thanks & Regards
    Anupama

    Hi
    If you have co product then it will get enabled.
    Thanks
    S.Murali

Maybe you are looking for