Internal order - FI postings not allowed

Hi
I am trying to release a billing document. I am getting an error saying "FI postings not allowed - I.O number". I am not much aware of internal orders. Could anyone here let me know how I can enable FI postings for this particular internal order.
Thanks and regards
Aparna

Hello,
System Status
CRTD (which must have been greyed out)
SYSTLINE - Field name
There is status buttons, next to this field, (with black triangles)
If you press on upward traingle, it goes to next level and system status gets changed.
To to Technically complete status and try.
Check in REL and TECO status.
Regards,
Ravi

Similar Messages

In Sales order plant is not allowing to change

Hi Guru's
In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
dnr

Hi friend,
I suppose you cannot change the plant at order level if the material is created to a particular plant.
As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
Regards

Manual reservation for order category 10 not allowed

why cant i make any manual reservations for a production order? is this possible or i can i configure the system to allow this?

>
R Brahmankar wrote:
> Dear,
>
> It is not possible.
>
> You entered an order whose category only permits automatic reservations. The following order categories do not allow manual reservations:
>
> 10 PP production order
> 20 network
> 30 maintenance order
> 40 batch order (process manufacturing)
> 50 inspection lot
>
> When convert the planned order into production order, reservation will take place.
> This planned order is created by mrp run.
> Without running mrp, you are creating production order manually.So not possible to reserve.
>
> Order reservation will be created in issuing plant for components if u create production order manually.
>
> Plese check the "Plant"assigned in for the 2component in the "Component Overview" of the Prodution order.if it is 0002, order reservation will be created in at 0002 .
>
> Regards,
> R.Brahmankar
can this order category be configured?

Manual reservation for order category 20 not allowed

Hi,
We are getting the error message "Manual reservation for order category 20 not allowed" when trying to manually create a Reservation Order charged to a network through transaction code MB21.
Anyone knows how to solve this?
Will appreciate feedback. Thanks!

Hi,
You would need to add this component in your WBS element & then the MRP run will generate a reservation for this. You cannot create a manual reservation using 281 mvt in MB21.
Refer sap note 43924, read the paragrah under 'cause and prerequisites' means that according to SAP's standard design, reservation for Network is supposed to be automatic, not manual. However, if manual reservation is really needed, do apply the solution provided.
Hope the above clarifies.
Regards,
Vivek

Manual reservation for order category 30 not allowed

Gurus,
I want to do manual reservation for order category.In MB21 when i try to do the reservation the system in giving the error message
Manual reservation for order category 30 not allowed
What should be done to overcome this.
In the order one component is given,i want to issue additional component,this is where i am encountering the problem.

The Standard System would not allow you to create a reservation manually against a Maintenance Order Whether you change the Res / P Req Indicator to Never. Still the System would generate the Reservation for the Stock Materials. Purchase Requisition could be created manually against the Order but reservation is not. The Movement types used for reservations are 261/262. Kindly elaborate on the requirement, may be a work around is there.
If you want to skip the goods movement against reservation step, you should enable the back flushing indicator against the stock material in the General Data View so when you would be entering Confirmation against the order, the goods movement would be automatically posted against the reservation created automatically from the Order without you having to bother about the reservation.
Edited by: Usman Kahoot on May 31, 2010 1:50 PM

INTERNAL ORDER: "FI: Postings" is not allowed (ORD 90001)

Hi Gurus,
I properly Configuration Internal Order but FI posting doesnu2019t allowed.
Configuration Internal Order.
1.                   Creation of Order Types(Ex. Internal Order for Telephone), (Nos Range given Internal)
2.     Creation of field status group making cost centre and internal order mandatory
3.     Creation of GL a/c (Telephone or Vehicle Fuel) for FGS-G002(Cost Center & Internal Order)
4.     Creation of internal Orders
5.     Posting of transactions in FI u2013T.code-F.02
Now what I done the mistake clear detail
Thanks & Regards
Selva.

Go to Order change and change the status of Order to "Release" or some thing else that allows fi postings. You can explore "Allowed transactions" to know more.

Internal order number is not picking in Capital PO

Dear All,
While creating capital PO the account assignment tab internal order number field is not getting updated. While entering the asset number the internal order number field shows blank.
Kindly advise me to rectify the setting, If I done wrong.
Thanks...
Edited by: saravana j on Jun 14, 2010 10:33 AM

Yes this is correct. How the system should know the internal order?
When you use a combination assets / internal orders the proces steps are:
Create a investment internal order
Assign the PO to the internal order order.
The costs are posted on the IO
Settle the cost to the AUC
Final setle the costs from the AUC to the final asset

OKB9-Internal order assignment is not working

Dear Guru
I have an Requirment that whenever Billing document get posted data must flow to xxxxx Internal order.I assign the Internal order to cost element in OKB9.But not when posting billing document I cant see internal order in accounting or general ledger view.

Hi Deepali
If copa is active, revenue will post to copa. Okb9 is just a default and is used when no other cost object found
If you want biling to post only to Int order, assign it in your sales order account assignment tab
Note that in vkoa, you will need to maintain GL acct against Kofi and kofk both in that case
If you want it to post to both IO and copa, enter IO along with Prof segment in sales order
Br. Ajay M

In AS03 internal order field is not being utilised

Hi All,
In the master data (AS 03 ) internal order field under the Tab, Time dependent is not being utilized because when the field is filled with I/O No it is generating wrong depreciation(additional) in COu2019S module which is to be rectified..
This field as a matter of fact needs to be filled up, to know from where the asset is capitalized. Correct me if i am wrong.
Regards,
Arvind

Hi Arvind,
This field in the tab Tab, Time dependent is used for the depreciation posting.
When you want to see where it comes from you have to use the ftab origin.
If you settle the cost from an investment order/project it fills in automatecly this value in the tab origin

Order type PM03 Not allowed in IW31 to create

Hello,
I need to stop creating in order type PM03 in IW31 since it is created in background job.
and i have another order type and assigned to roles so I am not able to use the role control for this.
is there any other user exit for this?
Shri

The following code in userExit IWO10009 (Include ZXWOCU07) , will not allow PM03 Orders created directly.
IF SY-TCODE = 'IW31' AND CAUFVD_IMP-AUART = 'PM03'.
MESSAGE: 'Direct Order Creation not allowed for PM03 Order type' TYPE 'E' DISPLAY LIKE 'I'.
ENDIF.
Note that this is prevented at the time of saving the Order. The error you get is
KJogeswaraRao

In Sales Order Users are not allowed to change price for any material

Dear all,
Please give me the solution :
In Sales Order va02 Users are not allowed to change price for any material .

Hi Amit
If you want that in VA01 manual as well as other pricing condiion entry and cahnges to be allowed and only in va02 users should be restricted ,then you have following alternative.
Go to T.Code SHD0
Select Transaction VA02.
Create a new variant ,give suitable name.
select option change with processing.
So u can run a va02 transaction and for every screen u can create screen variant and control data entry whether required , dispaly or hide.
in this for LV69a pricing screen disable update button .
so system wont change anything updated or cahnged in pricing.
further you can create the variant transactions from this transaction variant and assign to different users as per control requirements.
I think this will help you
Regards
mandar

With out goods issue for order system should not allow for order confirmati

Dear all
with out goods issue system should not allow for order/operation confirmation.
how it is possible.
Regrads
Srinivas

Dear ,
In some cases we required to do confirmation or TECO without GI .
We can change it as per req using user exit
Regards,
Ishwar

How to reverse Internal Order Settlement Postings

Dear Sir,
We have settled cost of an Internal Order to another Internal Order using Tcode KO88 . Due to some mistake , we want to reverse the posted settlement transactions .
Pl guide us , how can we reverse the same .
Regards
B Mittal

I had execute ko88 in period 3, for internal order type tools,
now I wont to reverse settlement but in period 4,
period 3 is closed.
can I reverse the order with ko88, then with kb21n repost the order for tool to the new one investment order.
now I have also problem with direct activity allocation, I need first reverse direct act all on old order and post it on new type order.
is this process ok=?

Postings not allowed in SD

when i post a sales order system wont allow, it displays posting is posible next peorid. How to close the period
any bady replay my Q
Thanks&Reegards
Rakesh

Hai
Thanku for this answer my problem wad solved.
Regards,
Rakesh

Error while creating internal order

Hi,
I have defined an Order type for budgeting purpose, so that statistical internal orders be created under that order type.
This is required for budget controlling.
Now I am not able to create internal order in Ko01.
I am getting the below error message:
Internal Orders: Profit Center not allowed
Message no. Z1052
Please guide me how to create statistical internal order for new order type defined.
Thanks & Regards,
Divya

hi
goto oke5 actovate u r contorling area for year base and also asiisgm dummy profit center., u can make settings in this path,
sap img- controling-profit center accounting-besic settings -contoling area setting-maintain controling area setting, this sceern u activate year wise ,a nd also assign profit center.
and u dont define profit center goto same path -masterdata- prifitcent - define profit center.
first u settings completed,
other wise u contact ur fico consultant
regards
sankar.

Internal order - FI postings not allowed

Similar Messages

Maybe you are looking for