Internal Order # not settle

  Hi,
The Internal order # 10010 has $5000  that did not settle during transaction KO8G.
Why did this order not settle? How can I settle it correctly?
Thank you.

Hi
Settle this order from KO88, in test run.. System will show you the error message, if any
Rectity the error and Process KO88 again
Check if the Settlement rule is maintained
Br. Ajay M

Similar Messages

  • Report on Internal orders not settled

    HI All,
    I need a report on the open internal orders which are yet to be settled.
    Thanks
    Z

    Hi,
    You can check the following standard report;
    S_ALR_87012995 - List: Orders
    If any Order shows a balance in the Actual column that means either it is not settled or there are still balances which can be settled. A zero in Actual means that the order is fully settled for the reporting period.
    Thanks,

  • Internal order not settling as asset is already deactivated.

    Hi friends,
    when iam trying to post KO88 internal order settlement it is giving the message that "ASSET xxxxxxxxxx is deactivated",in my settlement rule there is not that asset another asset no is there,
    where is the link for asset and IO ?
    How to see the deactivated asset?
    thanks,
    Srini.

    Hello,
    Might be your said asset number is sub asset no. which is coming in the error msg asset no.
    first check the relation between error msg asset and which asset you are going to do settelement.
    The asset deacivation button will available in the Asset master record general data.
    If helpful pls assign points,
    Rams

  • Internal Order not being created in cProjects-Accounting Integration

    Dear All,
    We are working on cProjects 4.0 with ECC 6.0,
    Trying to do Accounting Integration.
    For only one Project I am able to create Internal Order,
    But I am getting following error.
    “Cost/revenue rate YP002 is not valid in organization 00000000   “
    Inspite of assigning these rates to the organization 00000000
    For other projects, when I click on accounting:
    I get following error
    "Single-Obj.Controlling on InternalOrders 0188993B3E343947A046B554FD886E03 000006000032 does not exist"          
    When I go to Controlling Cockpit, I see this Internal Order not being created.
    Have revisited all settings, project type, etc.
    How do I go about this.
    Kindly help,
    Navendu

    Dear All,
    I was able to solve the one of the problem, with the following settings,
    Assign Cost Elements & Activity Types:
    Choose Organization, Start & End Dates, Cost and Revenue Elements, Currency.
    The start and end date of the cost/ revenue did not fall within the start and end date of the Organization.
    Regards,
    Navendu Shirali

  • Foreign currency posting to Internal order and settlement

    Hi All,
    The payment posted to an internal order was in a foreign currency then translated into usd.  The settlement used a different exchange rate so in usd there was a balance.
    How do we rectify this..?
    Regards
    Ashok PRabhu

    Hi
    I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
    There would be some ABAP trick pertaining to IS-H which I am not aware of...
    I can guide you a bit...  During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
    a. Either it will get posted or
    b. It will get over written before posting....
    based on the outcome, you will have to decide your next course of action
    Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
    I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
    Regards
    Ajay M

  • FB50 posting to internal order not possible.

    I have another problem. We wanted to settle costs collected on internal orders to a balance sheet account. So I created a new order type, allocation structure, settle profile. But when I try to do fb50 and debit some expenses on this internal order I get a message "FI postings not allowed". Can you please help me with this.
    Thanks.

    Hi,
    You would not have released the Order.
    Once you release the order then only postings are possible.
    If you have released and still you are unable to post transactions:
    Then u need to check the status profile that you are using
    Please award points suitably
    Best Regards
    Surya

  • Internal Orders - Primary Settlement vs Secondary Settlement

    Internal Orders
    Our current settlement profile allows for settlement from primary to
    secondary.
    In the Business Intelligence (BI) project the secondary accounts are not included in the
    fin statements. This causes problems within certain Comp. Codes when looking at the
    income statements at plant level.
    Another issue with the settlement to secondary accounts is that the
    budget displays on the primary account but the settlements from PM comes
    through on the secondary account. This causes further calculation
    issues when evaluating budgets.
    Will the settlement profile for primary to primary settlement provide an answer or should we include sedondary accounts in the Business Intelligence project?.

    HI,
    as PIET mentioned secondary cost elements are CO unique. If there is a need to display these values in accounting (you are using reconciliation ledger or Fi/CO online integration), use CO substitution (OKC9) callup-point 60 to assign account number(s) to secondary cost element(s). Otherwise just only one account number (OK17) captures to value of all secondary cost elements.
    BR Christian

  • Internal Order not allowed for revenue posting

    Hello all,
    I have a problem, while doing migo for subcontracting materials(movement type 105) following error has occurred:
    Message no. KO014:Order 5000012 cannot carry revenues
    Steps i have followed:
    Step-1: In transaction MB1B materials are transferred to stock with subcontractor with movement type -541(Transfer posting to stock with subcontractor from unrestricted.-use stock) and with reference to scheduling agreement number. (A material document is generated).
    Step-2: Creation of Subcontracting Challan through T-code-J1IF01 with reference to material document generated in step-1 above.
    Step-3:  Goods receipt through T-Code-MIGO with movement type 103(Goods receipt for purchase order into GR blocked stock) with reference to scheduling agreement number mentioned above. (A material document number is generated)
    Step-4: Release of GR blocked through T-Code-MIGO with movement type 105(GR from blocked stock) and with reference to material document generated in step-3 above.
    When the material document is checked, system does not give any error but at the time of posting the same system displays the following message:
    Order 5000012 cannot carry revenues
    The above order is an internal order and is assigned to Stock Change Account (a primary cost element) in OKB9 (Default account assignment).

    Hi
    Go to T.code KO02 and check in the Control data tab if your Internal Order is blocked for Revenue Posting or not.
    Regards
    Hari

  • Internal order not coming automtically in asset purchase order

    Hi!
    I have created one asset under construction and internal order number is assigined in AUC in tabl Origin.
    Budget is maintained for that internal order.
    But when I am creating the asset purchase order for that AUC, system is not automatically picking up the Inernal order, even though internal order is assigned in the asset master.
    I have created Asset acquisiton GL accounts as statistical Cost elements.
    can you help me why system is not automatically picking up the internal order?
    regs,
    ramesh

    Hello
    in ACSET, ANLA-EAUFN also,
    Have you ticked the account assignment field also....
    regards

  • Internal order: multiple settlement

    Hi all,
    I need to settle one particular cost element from an internal order to a cost center. All the remaining cost elements should be then settled to another receiver. I can have several settlement receivers but only one allocation structure.
    I can use assessment or distribution but the aim is to have all these values in the "Credit from settlement" part of standard reports.
    Any idea on how to achieve this?

    Hi John
    you need to use source structure with 2 separate parts as shown below (1 for cost elements to cc and the second for others)
    then create allocation structure with the same logic (for each one of the parts mentioned)
    and then use them to a settlement profile. When you maintain the order and specifically the settlement rule you need to attach the respective source structure to each one of the receivers of your order. (that means 2 lines one for cc with associated source structure and a second line with second source to other objects)
    Hope it helps
    Panagiotis

  • Internal Order not required

    Dear All,
    Here I am doing F-02 transaction there i am giving Cost center, Profit center and Business area and Internal order is not required, But system is giving message like "Please enter Correct Internal Order".
    I checked in OBC4 and OB41, there Order is in Optional.
    Here my exact requirement is without entering internal order the entry should be posted. The system should not ask the above message.
    Can you please guide me how to fix this issue.
    Thanks & Regards,
    Ramesh Reddy

    Dear Ramesh,
    Please check whether you have validation or substitution for this TCode.

  • Internal order not coming into PR

    Dear SAP gurus,
    We have a scenario where asset is bought using a budget in internal order. We have set the internal order as statistic only, and we have assigned the IO to the asset number. Then we input the asset number in the PR, we expect that the internal number should follow as well. But it is not, thus only asset inputted there. This is not acceptable as if this is the case, then this PR would not consume the budget in the internal order.
    I know for sure that SAP should be able to derive the internal order as I have seen this done in my previous project. Can anyone of you share what need to be done to make sure that the IO follows as well?
    Best regards,
    John

    Hi John,
    Please check the following points:-
    Asset recon account is made as a statistical cost element or not.
    In the asset recon account, check if the field status group allows Internal order field as optional.
    The internal order is assigned as investment order in the origin tab of Asset master data.
    The Internal order master data is categorized as "Investment" in the object class.
    Check configuration settings in transaction code "ACSET", whether EAUFN- Investment Order is allowed for all transactions.
    BR, Kavita

  • Stock should kept in block till Process order not settled

    Hi,
    My client requirement is like, untill process order not get settled, confiremd stock against process order sholud not transfr or consumed from storage location.
    Please let me know the best possible solution.
    Regards
    Rakesh

    Hi,
    There is no direct control of order status on the relevant stock.
    Either do GR to quality stock or block stock & utilize the same after order settlement.
    Also use batch management to trace the order specific GRN.
    Could you pls tell us why does your client require this?
    Is that client is going for MAP in case of SFG & FG?
    Hope this helps you.
    SmanS

  • Internal Order not allowing to decrease budget amount

    Dear Experts
    We have to close Internal Order no. 800001526 but system is not allowing to decrease budget amount from Rs. 2606000
    Regards
    Ajeesh

    Hi Ajeesh,
    I happen to go with Manikumar, because in the recent post we see either actuals/commitments Zero only, but when we see at your first screen, there we see total value (either actual/commitment) as 5212000, which is double of your budget i.e. 2606000, that's why there it is giving negative budget value of -2606000 (i.e. 2606000-5212000) which implies your budget has exhausted.
    So when you post with 5212000, system hasn't stop you as you might have not had availability control or had tolerance limit for more than 200%.
    Please if at all it is testing server, why don't you create one more order and check?
    Regards...
    Jose

  • Scheduling Internal Order for Settlement

    Hi
    Can some body explain me how to schedule Internal order settlement. My company would like to settle the Internal orders automaticaly using schedule manager
    thanks
    Prasad

    You can do so by having a settlement profile that permits settlement to fixed assets and assigned to the order type.

Maybe you are looking for