Internal Order Plan Line Items not appearing in KOBP

Hi,
I have entered internal order plan using transaction KPF6. I can then see it in reports like S_ALR_87012993, S_ALR_87012996, etc. In these reports, when I double-click on an item, it opens up another window which enables us to select order actual line items, order plan line items, etc. Once I click on order plan line items, system automatically takes me to transaction KOBP and displays the line item.
What is surprising is, instead of going thru all the above, if I directly execute transaction code KOBP, I do not see the plan line item. I have seen a similar issue in another forum (link hereunder) and apparently the issue there was with planner profile. In my case, I am sure I have entered plan and trying to retrieve the line item (using KOBP) with the same planner profile.
Internal orders - Plan Line items are not uploading into SAP!!
I have also checked that the authorization group assigned to the planner profile is blank and that is the authorization group my user ID is assigned to.
Any thoughts!
Thank you,
Srikanth

Hi Srikanth Tamma,
After going through you thread, I have tried entire process in my system and it is working fine....
I don't see any problem...
Are you using BAPI or Excel Upload for your planning?
Srikanth Munnaluri

Similar Messages

Internal orders - Plan Line items are not uploading into SAP!!

Hi Experts,
Am uploading the budget values as plan line items of Internal orders(AUFK table) from my Z prog. by using BAPI_COSTACTPLN_POSTPRIMCOST.......in Return table(bapiret2), am not getting any error messages........so, am taking it for granted that, upload is successful.
But, when I went to KOBP transaction.........I did not see any values for the internal order in question.......but, just now, I uploaded successfullly!!
Let me know that, Why its happening like that? How to fix it?
replies appreciated, thanq.

I've lil doubt if this BAPI really update the internal orders in KOBP transaction.
However just refer:
bapi_costactpln_postprimcost
Use BAPI_COSTACTPLN_POSTPRIMCOST
And refer relevant OSS which is mentioned in Above threads.

Line item not appearing in PGI accounting document

Hi after complete sales process Sales order---Delivery -PGI-----Billing, when i chked the pgi & click on the Accountiong tab in pgi document only twoo line items appearing instead of three in the document
<< Moderator message - Everyone's problem is important. Please do not ask for help quickly. >>
thanks
Edited by: Rob Burbank on Dec 17, 2010 6:25 PM

Hi
That particular material is in split valuation class & for it three valuation types are defined out of three two valuation types defined with moving average price & the rest one is not defined for the same, by default system automatically picking up the blank valuation type so it is the job of the end user to fill the valuation type in the sales order in Item details tab so the system will pick up the cost & will post to PGI Accounting document

Direct sales line items not appearing in VF04 even if MIRO document created

Hi,
Some of the direct sales line item are mysteriously not appearing in VF04, even though the MIRO for the PO related to it is done. In some cases all the items of sales orders are not appearing in VF04 , in some cases it is happening randomly. Such items can be process manually through VF01 . Also if report SDVBUK00 is run , these line items are seen in VF04.
Kinldy reply .
Mamta

Dear Uday Kumar Narayanappa ,
I think as a consultant you have the say in deciding how the things should be mapped in SAP than the USER.
I dont find any reason other than having the same user id being shared between multiple users (and hence variant cannot be used).
Anyways try this.
Make a Z program copying VF04 .
Give the Tcode which is agreeable for the users.
In that Z program , write a code NOT TO CONSIDER documents of type ZNEW.
Now limit the authorisation of this new program only to those users who doesnt not want to deal with ZNEW.
Hope it helps.
Thanks & Regards,
Hegal K Charles

Service PO sub line items not appearing in PO print out

Hi,
Service PO line items under item details are not appearing on print out...
Where are they stored ..means in which table?
Regards

Hi SSingh,
Has this problem been solved? we have a similar problem here --- after upgrading from 4.6c to ECC6.0, we found that the service PO line items are not being shown in the PO printout. This happens for items that have been marked 'delivery complete'.
How do we get the service lines to print out again? Appreciate any help out there!

Fs10n line items not appeared

Hi
In FS10n if i click on cumulative balance line item data not appearing the error MSG is no item exists (see long text).but it showing balances. after that i have checked line item display check box in fs00 every a/c is selected? pls solve the issue

Hi,
If you have the NEW G/L activate the correct transaction to check the balances is FAGLB03.
Transaction FS10N is for classical GL.
go to transaction SE16 and check table FAGL_ACTIVEC. You can run without passing any parameter.
Then you can see if the new GL is activate as per example:
Table FAGL_ACTIVEC
New G/L Acctg Active Update GLT0 Read GLT0 Method
X
Is this case the new GL is activated. You will not see any values at transaction FS10N in case you are not reading or updating GLT0. Transaction FS10N read the balances from table GLT0 and transaction FAGLB03 read the balances from table FAGLFLEXT.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

Multiple line item not appearing in vendor line item in FB60

Hi
I am posting FB60 accounting entry. I am deducting WHT on the invoice.
For ex: Expense amount - Rs. 100000, WHT - 10000
Hence accounting entry is posted:
Expenses A/c.. Dr 100000
To TDS Payable 10000
To Vendor A.c 90000
Now when i see vendor line item in FBL1N there is only one credit line item for Rs.90000.
But my requirement is that, vendor line item report should include two line item:
One for vendor credit i.e. Rs.100000 and one debit for TDS payable for Rs. 10000 and not single line item for Rs.90000
Please let me know how can i get this. Is there any standard report for the same?

Hi friend,
unfoortunately the system doesn't post debit for vendor in this case. You have no report to display line items that wasn't posted.
would you like have it:
31 - Vendor ... 10,000.00
25 - Vendor............1,000.00 *
40 - expense .......10,000.00
50 - WHT ..........1,000.00
The standard automatic WHT post directly the invoice amount to vendor account like this:
31 - Vendor ... ...9,000.00
40 - expense ........10,000.00
50 - WHT ...........1,000.00
Tell about your business process. What are you doing for ?
regards

G/L account issue-Line items not appearing in the G/L

Hi,
We are using ECC6.
A B/S account is open item managed as well as line item managed. Also it was later activated for ledger group specific clearing.
There is a problem line items do not get displayed in FBL3n (i.e they do not get updated in the BSIS table), when we run program RFSEPA01 it updates the line items in BSIS table but when subsequent line items are posted we face the same problem again..which can be solved only if we run the program RFSEPA01.
Please help.
Regards
Neelam

Hi,
Once the line item display check box is selected and ran prog RFSEPA01, system will updates the records to BSIS table for all the line items posted using that GL account. Afterwards it will defenitely generate line items in relatime, when the postings are made.
Better you to raise a OSS message by attaching the proper documentation of the total scenario.
Thanks,
Srinu

Display report : plan line items for internal orders

When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
No plan line items were selected
Message no. KB421
Could anyone advise?
However, the report with KOB1 tcode works well and i have the results as expected for actual line items.

this is may be config issue.
can you explain with accounting entries for said line items and offsetting GL for each line?
regards.
ashok

Service Order Planned Costs and Cost Center Planned Line Items

Experts,
I am curious of Service Order Planned costs, and whether or not these planned costs are being posted to the Cost Center linked to the Service Order Operation's work center.
I am a but puzzled as I don't see any planned costs from any Service Order Operation in a cost center linked to the Operations work center, when reviewing "Cost Centers: Plan Line Items" report.
BR,
Cenk

The planned costs were input in one of the Service Order operations as planned hours. There is a column for it in the operations list. The amount of hours have incurred a planned cost on the Service Order header.
I simply assumed that this cost would be credited to the Cost Center linked to the operation's Work Center. But that is obviously not the case. I am not familiar with the PLICC field and the functionality it provides.
Thanks!

Sales order some line items are showing not relavant

Hi SD Guys,
In sales order some line items are showing not relavant.
Why are they showing a status of not complete or "not relevant"?
Thanks
Sunny

Hi sunny,
plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
regards,
ram.

Price is not changing in sales order in line item

dear all.,
price is not changing in sales order on line item,error comes "CHECK ORDER STRUCTURE.
Regards,
Praveen

Dear
You can go into VA03 --> Menu --> Environment --> Partner --> display credit account (if the data is maintained, than the system springs into FD33). Another way is to check if the sales order type is assigned to credit management in the transaction OVAK (should be D for aut. credit management).
Did you enter the pricing date , prcing condition and press enter , so that it should pick the correct price?
Check this and come back
Regards
JH

Sales Order and Sales Item not copy over to table AFPO-KDAUF and AFPO-KDPOS

Hi Expert,
May I know why I run MRP and convert planned order to production order based on Sales Order, why the sales order and sales item is not copied and save in table AFPO-KDAUF and AFPO-KDPOS?
I can see the sales order and sales item is appearing in MD04, but how is the linkage between production order and sales order/item?
Thanks.

Sales order No. and sales line item will only be transfer to production order in MTO ( Make to Order) scenario.
If your scenario is MTO and the sales order reference is not getting transfer, then check your requirement type and requirement class setting in T.Code OVZH and OVZG.
In standard SAP 'KE' requirement type 40 requirement class is used for MTO scenario.

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR

Down Payment settlement Line is not appearing in the final Billing

Hello All,
Activated the Milestone billing plan. Created a Sales order > Down payment Billing document > and cleared the Down payment billing document.
While trying to bill the final invoice the down payment settlement line is not appearing.
Please suggest us what would be the probable reason for this to resolve the issue.
Checked in detail and found in the table BSID the field sales document ( VBEL2) is populated with blank and not with the sales order number.
Thanks & Regards,
Madhan.

Hi
When you create a final invoice the downpayment clearing line is retrieved using function
module SD_DOWNPAYMENT_READ. The function module will not be able to find the
downpayment if the VBEL2 and POSN2 fields are not filled.
If the downpayment is posted and cleared correctly in F-29 (this is the only way) these
fields will be filled and the document should be retrieved and the value transferred to the
AZWR condition.
Run VF01 with a breakpoint in SD_DOWNPAYMENT_READ
go to the end of the function module you will see the structure t_sdaccdpc
This is filled with all valid entries for clearing. I suspect in your case it is missing.
Try posting a new example in using F-29 make sure it shows cleared in the
document flow then check at this point above in the final invoice
Hope this helps you further
Kind regards
Brian

Internal Order Plan Line Items not appearing in KOBP

Similar Messages

Maybe you are looking for