Internal order report through report painter ?

Dear Friends,
I have requirement to execute the internal order report with the following parameters with separate T.code
Kindly help is it possible to develop through report painter  or need development ?
Input screen :
     Company code :
     Period (From to ):
     Order group:
     Or Values (from to ):
     Translate to target Currency : (If I select respective currency it will show in output )
     Exch. Rate Type : (P OR M)
Output screen : same as S_ALR_87013019 - List: Budget/Actual/Commitments
I had used report painter and changed the currency target also with this report S_ALR_87013019 - List: Budget/Actual/Commitments.
Regards
Sampat

Hi,
I think this is feasible in standard.
You can look at cost center report 1VK>1S3W-001 (S_ALR_87013634) as an example.
Regards
Ali

Similar Messages

  • Vendor Ageing Report Through Report Painter

    Dear All
    As per my company requirement we are trying to develop vendor ageing report through report painter, by using library 8A4 (EC CPA: Drill Down Open Item), our requirement is all normal items and some special GL transactions (Not all) has to flow in this report.
    In FKI4 / FKI5 if we assign any special GL, then data flowing in to report relating to that particular special GL transactions only, normal items are not flowing in to report. If we not assign any special GL then all normal and special GL transaction are flowing in to report.
    Can anybody suggest how to restrict flow of some special GL transaction data in to report. Our requirement is all normal transaction along with some specified special GL transaction data has to flow in to report. Points will be rewarded on helpful answer.
    Thanks & Regards
    Madhava

    Hi Madhava
    You can pull all values whether Sp GL or Normal GL values. For a particular 'Column' if you assign Sp Gl Indicator you will fetch all Sp Gl Values in that column. Same way in other column, you dont assign Sp Gl Indicator, instead you calculate manually as shown below;
    In a similar fashion you can calculate all values for (00-30), (31-60) ...and so on.
    Hope this clears all your doubts?
    Regards
    Abbas

  • Reports through Report Painter

    Hi All,
    Can you please guide me how to use report painter and how to create custom reports through report painter.
    I want to prepare a report that will show Planned costs,Commitments,Actual Costs,Original Budget,Supplements,Current Budget in a single report.
    If any body have some manuals with screen shots,that will be very usefull.
    Waiting for your answars.
    Muzamil

    No better manual than SAP help!
    Below is the link to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Sreenivas

  • Want to add and remove GL account in report through report painter

    Hi,
    Thanks in advance,
    1.I want to add new GL account in IS01 report i.e. Income Statement. I am trying to add through report painter but could not able to do it.
    2.Also i want to delete existing GL account from report through report painter.
    Any body pls suggest the steps to add and remove GL account through report painter because this report is under report painter.
    Thanks,
    KMR

    the account is probably in account group or set. Look for that one in report painter and then go to the set or account group and remove/add the account.

  • Drill Down Report through Report Painter

    Dear All
    I am looking solution for Drill Down Reporting through Report Painter.
    Kindly Help me for the same.
    Thanks in Advance
    Alok

    Hi Alok,
    All the report writer reports and report painter reports will have the ability of drill down. You can create a report using  T Code GRR1 and GR31. Create a report group T Code GR51 and assign the report to the report group. Generate the report group using T code GR55. One the report is executed double clik on any line item, the system will take you to the drill down options.
    Regards
    Sridhar

  • Marginal Cost report through Report Painter

    Hi
    We have a requirement create a report for marignal cost through report painter.Client report requirement as belwo
    Fixed Cost Management report by product
    Fiscal year
    Period
    Cost center Cost center name Product Group Product Group Name sales sales profit fixed cost variable cost Marignal profit
                                                                                    P/V rato BEP
    Please give step by step in report painter

    Hi Ravi,
    Could you please review note 156690 which explains how you can create a report-writer/report-painter
    report for selection with WBS element groups? Please take the following into consideration:
    1. A library can be a library for project reporting containing the shortcut PS. This library the must do the object selection regarding the characteristic OBJNR (object number) only ->characteristic OBJNR active. The characteristics PSPID, POSID and AUFNR must not be inactive here.
    2. Or a library can be a library for generic reporting with repor-writer and report-painter. This library must not contain shortcut PS. In this library you can activate characteristics PSPID, POSID and AUFNR. Characteristic OBJNR must not be active here.
    Thanks a lot and kind regards,
    Enrique

  • Internal Order Assigned to - Report

    Hi Friends,
    Is there any standard report for checking the internal order for which its is assigned to. Ex. Purchase Order, Asset transactions and for some custom programs etc.
    Regards,
    Anil

    Hi Anil,
    We can devide Internal order transactions into 3 types
                          Planning   - Report : KOBP
                          Commitment-Report : KOB2
                          Actual   - Report : KOB1
    Purchase requisitions and purchase orders comes under Commitment
    You can get Purchase orders in ME2K
    You can view S_ALR_87013010 Report for Internal orders drill down by period wise .
    Krishna

  • Linking two internal orders in the report S_ALR_87013019

    Hi friends,
    Can I link an internal order "A"  to another internal order "B" in the report "S_ALR_87013019".
    it means when I choose the order "A" in "S_ALR_87013019", the report shows the result of the two internal orders (A and B).
    your prompt response will be very apreciated.

    Hi,
    As per my knowledge with out giving the input fields you can't get report.
    You have to A and B both as a input fields, if you want to take the report.
    Regards
    Srinu

  • How to transport generated reports through report painter

    Hi All,
    We are upgrading from 4.6 to ECC6. Previously somebody created reports for Finance  through report painter, now in the new system they are two to three system generated reports which are produced by report paintyer (I guess) are retrieveing wrong data.
    So I debugged the generated reports and found two locations
    1. generated report as syntax error
    2. at selection it is having an additional filter with company code for each table  like coss, cosp, cospp which I dont find that filter in the old 4.6 generated report, I modified the generated report but problem is that it dont give me any transport number.
    So these reports are client specific, can any one suggest me how to transport these changes to quality and production environment.
    I tried with transaction GCTR , but it is failing when it is released.
    Can any one suggest me.
    Thanks
    Tangudu

    No better manual than SAP help!
    Below is the link to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Sreenivas

  • Drill down reporting through report painter...????

    hi  all ,
         I am generating a P & L report  from report painter .....
    I wish to have a drilll down option on items in rows 
    for eg if  i click on income i should be able to see all  the items of income ....
      can this be done how...????
    otherwise
    i shall have  show all the items  in the report
    the other thing is that can i give  a company logo in the report generated by report painter...
    please help as it is urgent
    thanks in advance..
    Nidhi
    pts assured

    Hi Nidhi,
    couls you give me a material on drill down reporting?

  • NVision report through Report Book generating special characters

    Problem generating nVision Tabular report using Report Book. Reports brings special characters on two tabs after half way down the report. When we run the same report through two-tier mode it comes out clean. Tested the production and test layouts, they both bring the special characters. Running Peoplesoft Application 8.8, People Tools 8.45, MS office 2000 SR-1 Professional (both on server and the client computer.
    Appreciate any input on this case.

    Hi,
    Developer 6i does not support PDF subset (that is the easiest way to achieve this). In 6i you can try the following approach.
    Reference
    How to print Turkish correctly in UNIX Oracle Reports in PDF format? (Doc ID 146596.1)
    Regards, Roberto

  • Email a Report through Report Parameter

    Hi
    I want to email a report through MAPI. There is Mail Parameter available in Destination Type list but when I run report after giving this Mail Parameter then message "Mail Sub System Initialization error" comes.
    Pl help me out.
    Thanks & Regards
    Preeti

    I have same problem. Can you send me the solution if you are solved. Here's my mail -ID : [email protected]

  • Editing Report through Report Painter

    Hi SAP Gurus,
    There is a Report Library in which a report is created for displaying Business Area Balance Sheet and another report for Business Area P and L. But the report for BA P and L is executed the report is appearing in 2 tabs in navigation pane with one showing P& L and oneshowing Balance Sheet. The second report is showing only Balance sheet which is correct. I wish to know why the system is displaying in the first report the Balance Sheet. Can somebody inform this to me please?

    Hi sameer,
    Cash flow takes in to consideration of all ur balance sheet items and it will display the balances
    regards

  • Internal order settlement through KO88

    Hi Experts,
    i have one issue where i need to settle the Order balances to AUC on periodic basis, but user has not done it on periodic basis from past 7months. when we try to do it now, system is giving the error that the posting period is not opened to make the postings. Business is not accepting to open the closed posting periods. when we tried to do the full settlement, though the system is not allowing as the settlement type in distibution rule is PER(Periodic settlement).
    Can any one clarify me, if i change the settlement type to FUL and do the full settlement and can create the Asset and settle the balances to asset also through FUL settlement.
    OR can suggest me how i can settle these balances with out opening the posting periods and with out impacting settling the balances to asset as well.
    Thanks in advance,
    Venkat

    Hi,
    you can settle using "PER" settlement rule doing it period by period. Just key in the actual posting period in the field "posting period" in ko88.
    Example: you are missing settlements from period 002/2009 to 009/2009, actual period is 011/2009. So you settle period 002/2009 with "PER" in posting period 011/2009. Aftre this had happened, settle 003/2009 to posting period 011/2009, and so on...
    Best regards, Christian

  • Polish characters in Report through Report Service

    Hi,
    I have problem with ias9i (9.0.2). Firstly, I have installed ias9i infrastructure and then ias9i businss logic and forms. Unfortunately when I'm running reports with polish fonts I see mysterious character which are not the same as I get used to see when everything is ok.
    In all Oracle_Home I have set the same NLS_LANG. When I see source of report (JSP page) I see polish fonts correctly. I also correct
    encoding to WINDOWS-1250. After I run this report using rwservlet when I see source of generated file I can notice WINDOWS-1250 but UTF-8.
    I don't understand this situation.
    If Someone has any idea how I can workaround this problem I will be grateful.
    Thank You for Interest

    Thre are two issue:
    1. When you have a web layout in report with different NLS_LANG other then the default, there was an issue where the NLS_LANG was not picked properly. For this, you need to go to web view enditor and change the character set to desired NLS_LANG you need. With this, when you run the report to web, you will get the proper characters.
    2. Coming to Report servlet, it picks the locale information from machine locale and NLS_LANG specified in Reports reistery is not considered. That is the reason, you end up with UTF-8 encoding, since report servlet writes the report output by setting the http header based on machine locale where oc4j is running. This issue is resolved in Reports 9.0.2.2 patch. With this patch, you can define the desired character set in the before report value in Report escape section of report property. This remain same as it was in Reports 6i. With this, you will see the proper characters in web html output and the auto encoding in browser will work fine.
    In case you wish to run the reports under different nls_lang setting from same report server, you can go for dynamic switching feature which is available from reports 9.0.2.1 patch.
    thanks
    rohit

Maybe you are looking for