Internal Order status issue Error - Message Class X short dump

Hi All Experts,
I am creating internal order with CRTD status. However when I am trying to post transaction through MIRO , I am getting ABAP short dump mseeage class X. So I changed the CRTD to REL manually and able to solve the error.
But could any expert help me what is the logic behind this CRTD , REL, LKD etc ?
Since I am reading help.sap.com also as well but simple word help will be appreciable !
One more can we,
1 ) Create Internal Order with the REL status directly ?
2 ) If YES where configuration needs to be done
3 ) Will it hamper any business process ?
Exprts guidance will be appreciable.
Regards,
Sharvari Joshi.

Hi,
All Masters,
Eli - Thank you for your answers.
Lawrence - Thank you for simple word that is what I was looking for.
Can anybody tell me how can we create IO directly in LKD status ? Or it is manual acitivity by clicking on Set / Rest button and then check LKD and save. I tried in KOT2_OPA but not no any option found. If any experts can guide for the following configuration would be great.
1 ) Is it possible to create IO with LKD status directly ?
2 ) Where that configuration needs to be done ?
3 ) What is significance of JEST Table relating to Internal Order ?
Exprerts help would be great !
Regards,
Sharvari Joshi.
Edited by: Sharvari Joshi on Dec 3, 2010 11:52 AM

Similar Messages

Change of Message status from Error message to Warning message

Hello,
I would like to know the configuration details of changing the status of a message class from Error message to warning message.
Thanks
Manish

Hi,
You can do it via OBA5 transaction; enter the application code, and put an entry for the message setting the flag to warning. Keep in mind, that not for every message it could be done.
Regards,
Eli

Internal Order status as AVC

Internal Order status AVC
Please check and advice to us, regarding Internal order status activated as AVC but still postings are allowed with PR/PO. I mean AVC status is didnu2019t working.
Example: while creation Internal order we assigned the budget as Rs.100000 in 1st year and utilize the total budget, But 2nd year also we raised PR/PO with same Internal Order with another amount Rs.20000 (without supplement budget in KO24) and balance is showing as Rs.120000 under Assigned column in KO23 , Why system will allow the postings with same internal order still status activated as AVC.
So please advise on urgent basis.
Regards
PV

Hi,
Please refer to the following notes as I believe they will prove useful in resolving this issue.
Note: 602588 Availability Control Without Budget
Note: 783161 Logic Explanation when AVC is appears not working
Note: 178837 Explains why BP604 appears/does not appear.
Note: 1103499 Exempt cost elements in the availability control
regards
Waman

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

Which table stores CO Internal Order Status

Hi Guys,
I am changing Internal Order status, but can't find the respective field in RESB table.
AUFK status fields are not even changed !
Any idea Which table records internal order status changes ?
Cheers

Hi.. COAS is a view of AUFK..
COAS suppose to store the status.. which has 4 diff. status fields..
But those fields are not updated when there is a status change in Internal Order..
Cheers

I am getting a OS Status 2 error message from my air time capsule. Can anyone help me with this?

My time machine Air time machine capsule is showing an OS Status 2 error message. Can anyone tell me what that means and how can i fix it?

This is likely a better place to post
Time Capsule

Internal Order Status

Hi Guys,
I am changing Internal Order status, but can't find the respective field in RESB table.
AUFK status fields are not even changed !
Any idea Which table records internal order status changes ?
Thanks

Hi.. Thanx for that.
JEST table having OBJNR.. not sure how its been connected with order No. ?
Cheers

Error Message Classes for Leave Request

Hi,
I've checked every error message class I can think of but can't find the warning message:
"Absence cannot be partial-day, so clock times have been removed."
which is displayed in Leave Request.
Does anyone know which class it is in so I can stop it being displayed?
Rob
Edited by: Rob Adams on Dec 18, 2008 12:18 PM

You mentioned about configuring messages in Leave Request. How do you change the text of a standard SAP message? I would like to change the text of the message 015 Payroll Area &1 locked that is displayed in the portal, without using BADI.
As I read through the blogs this seemed to be the closest message to my particular question.
Thanks.

Audio Books and the error message " class not registere

I trying to download an library audio book to my player. I get the error message "class not registered" and the transfer sto
ps.
I have downloaded and intall the new firmware May 24, 2006 and the files that I'm trying to transfer is just a protected wma file. Any thoughts ?

Hello again,
Thank you very much, both of you for your attention to my problem. It seems that I made a mistake in choosing the correct license type. First I chose the system ID " N4S - SAP NetWeaver 2004s (DB2) " but actually what I had to choose was " NPL - SAP NetWeaver 7.02 (MaxDB) ". So I found the following thread which showed me how to unistall the wrong license by truncating the content of the table SAPLIKEY.
Logon not possible (error in license check) for users other then SAP*
Then I downloaded the correct license, and everything worked pretty well.
Once again, thank you very much both of you for your help.
Kind Regards,
Dariyoosh

Error message "paper too short to autoduplex" on Officejet Pro 8600

I have this problem with my new HP Officejet Pro 8600 Plus. I have standard letter size paper in Tray 1, and have all the printer setup set for letter size paper. No matter what program I print from, I recieve the error message "paper too short to auto-duplex". I click the close button, and the page prints. It is aggravating to take the extra step to close this error message every time I print. I shut the printer down for 30-60 seconds and this took the problem away. Is this normal? Will I have to do this often?

The fix is available in printer firmware (Software within the Printer). You can download it from hp.com and install from you pc to printer.
Here is the link. click download buttong to download the latest firmware.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-102210-1&cc=us&dlc=en&lc=en...
Happy Printing...
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Rework purchase order - serial number error message

We created a sub-contracting purchase order for re-work so we are issuing same material and receiving same material. The corresponding material is serial managed. So we will issue the same serial number and we will recieve the same serial number in this scenario. While doing GR we are getting an error message by saying that we can't receive the same serial number for the given material. If any one come across this scenario please let me know the solution
Thannks in advance

Hi
This is an issue in ECC5.0. you can not receive the same serial number on rework purchase order if you have already executed a 541 movement on same serial number. You need to change the serial number status to receive it again into system.
Try to change the serial number status from ESTO to AVLB in IQ02, if system doesn't allow to change the serial number status, you need to switch the serial number profile to a different one which will allow you to change the serial number status in IQ02.
once you change the serial number status to AVLB, system will allow you to recieve the serial number
Thanks

KO22 internal order budget issue

Hello All,
while making changes for internal order budget with transaction code KO22 the system shows a error as u201CItem order xxxxxx budget exceededu201D & for some orders u2018Item order xxxxxx budget almost exhaustedu201D & also referring to a budget for year 2006,2007,2008 . & The system doesn't accept those changes .
Another strange thing is that the system allows the same changes for few items (maybe 4, 5, or six that time it will get saved that time it will not give error) ,
but trying to do 10-15 changes , the system shows the warning message as stated above
If anyone has encountered this strange issue please share your inputs
Thanks & regards,
Prashant

Dear,
When making changes to budget then make sure you are increasing it not decreasing....
When you decrease the budget then system will check tolerance defined............and display warning or error....
For e.g in tolerance you have defined that system should display warning at 95% absorption of budget and Error at 100%.
You have set budget 10000 INR for the Internal Order. So it means at 9500 INR system will issue warning and at 10000 INR or more system will give error.
If posted amount to order is 9000 INR so you can noway reduce budget less than 9000 INR because it is 100% and system will give error.
Regards,
Chintan Joshi

RIM Twitter for BlackBerry Internal Twitter server problem error message

I have had this issue previously, it went away and now it's back; and can I remember how I fixed it... no.
I have a Bold 9700 running 5.0.0.680 and Twitter for Blackberry 1.0.1.7
Since updating to 5.0.0.680 I have been unable to login to Twitter via RIM's Twitter application. I receive the error message "Internal Twitter server problem."
I have tried the following to resolve;
Multiple battery pulls - no change
Flash back to 5.0.0.586 - no change
Flash back to 5.0.0.442 - no change
After flashing I have performed a full security wipe of the device to be sure its clean.
I am able to use UberTwitter and other social networking applications without any issues.
My BlackBerry is controlled via my companies BES. The Server version is 5.0.1 and I can confirm that the Value-added application policy is installed and has 'Disable organizer data access for social networking applications' set to No and 'Disable RIM Value-Added Applications' set to No for the policy applied to my device.
I am also one of the Administrators of this server.
What I would like to know is how to solve this issue. A search of the internet revels a number of similar issues, but these where apparently down to an issue with Twitter not the software. As I am able to access Twitter with no issues via other clients and see no issues reported on the status feed from Twitter I have run out of ideas.
I have also fired up a number of the BB simulators on a development machine and have been able to access Twitter via a simulated BlackBerry without an issues; making me think this is either a BES, device, or carrier issue.
Any help would be appreciated.
Thanks
Mark

Hey Mark,
Welcome to the BlackBerry Support Community Forums.
Are you still having trouble connecting to Twitter for BlackBerry?
Since you're on a BES just to do process of elimination, I would suggest performing a reset to factory so that will remove the IT policy. Follow the instructions in this KB article: www.blackberry.com/btsc/KB18998
Then test out logging into Twitter, if successful then we know it is it policy related. If you still receive the same error, let me know.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Internal Order Settlement Issue

HI,
I have posted some entries in Postage internal orders. But when i tried to settle that in KO88, it is showing the below message.
No Transaction Data Posted Since Last Settlement
Actually once the client executed KO8G transaction for all orders. At that time 2 Orders was not settled. Now When i tried to settle them in KO88, It is giving the above message.
Why it is not getting settled? How to fix this error. Kindly help me
Thanks
Kishore

Dear,
Because these order are alreaddy settled. No balance on these order please check in KKBC_ORD. You can just settle additional amounts posted since last settlement.
For deatils refer this link,
Order Settlement
Regards,
R.Brahmankar

Internal Order - AUC Issue

Hi,
I have created one internal order for AUC purpose.When i call Asset Under Construction option from the Internal order screen (KO02) it is taking me to AS01 asset creation screen.But here they system is taking the AUC asset class 4001 by default instead of my own AUC asset class.
why it is calling AUC asset class 4001 instead of my AUC asset class? Kindly help me
Thanks
Kishore

Hi ,
Check the Properties with 4001 with your asset class.
In OBOA-
Account Determination should be 40000 or Copy of that.
Status of AUC should be select for- Investment Measure
Regards,
Sridhar Sha

Internal Order status issue Error - Message Class X short dump

Similar Messages

Maybe you are looking for