Internal Order - System Status LKD
Hi All,
For an internal order which has system status LKD active, can I mark it for deletion?
When tried to do so, I get an error message like
" E BS 013 System status LKD is active (ORD XXX)
KO 424 Order XXX / Mark for deletion "
What can be done?
Thanks ,
Janani
Hi,
if your order is marked for deletion then you can't put it for locked status and it goes other way around i.e. if your order is lkd ,it can't be marked for deletion.
Reward points if it helps.
Regards
Karan
Similar Messages
-
System status LKD REL for operation & phases in Process order
Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
AmitHello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano -
Hi gurus,
My client wants to process a Purch order from a Preq. But when he wants to save his PO, he got this error message : SYSTEM STATUS LKD IS ACTIVE (ORD 9XXXXXXX).
Please advice
regards
Edited by: Patrick Konan-Messou on Apr 10, 2008 3:54 PMIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
System status LKD is active while doing ME21N
Hi,
While doing ME21N transaction system showing
"Error: System status LKD is active ( ORD 300303)"
Thanks and Regards
SKHi,
First of all ,please make sure if the status lkd is already exist for
the orders in koko4.If that's the case it is necessary to revoke the
status LKD on these orders e.g. with transaction KO02.
Best Regards,
Arminda Jack -
System Status LKd is Active( Ord 4257568)
Hi,
I am doing dsettlement of an PM order with transaction KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
How to tackle this?
Thansk
Br,
akkshayaIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
Reg Update Order System Status
Hi,
My requirement is, while doing TECO (technical complete) of maintenance order I want to check for open reservation/requisition in maintenance order. and if we found any any open reservation/requisition then order status TECO will not update. maintenance order will remain in present status. any other update done in this order before TECO will save.
Please suggest how I can acheive this.
I tried to use uesr exit IWO0009 and BADI WORKORDER_UPDATE but not abe to update order system status in this point.
Please suggest me any EXIT or BADI or Solution for this requirement.
Regards,
AtulHi Atul,
Following codes can be help u for Open PR before TECO.
*& Include ZXWO1U03
EXIT_SAPLCOIH_004
DATA: BEGIN OF IT_EBAN OCCURS 0,
BANFN LIKE EBAN-BANFN,
BNFPO LIKE EBAN-BNFPO,
EBELN LIKE EBAN-EBELN,
LOEKZ LIKE EBAN-LOEKZ,
END OF IT_EBAN.
DATA: IT_AFKO LIKE AFKO.
DATA: BEGIN OF IT_AFVC OCCURS 0,
BANFN LIKE AFVC-BANFN,
END OF IT_AFVC.
DATA: X_AUFPL LIKE AFKO-AUFPL,
X_BANFN LIKE AFVC-BANFN,
STR TYPE STRING.
SELECT SINGLE AUFPL
FROM AFKO
INTO X_AUFPL
WHERE AUFNR = CAUFVD_IMP-AUFNR.
IF SY-SUBRC = 0.
SELECT SINGLE BANFN
FROM AFVC
INTO X_BANFN
WHERE AUFPL = X_AUFPL
AND STEUS = 'PM03'." Extenal Service Control Key"
SELECT BANFN BNFPO EBELN LOEKZ
FROM EBAN
INTO TABLE IT_EBAN
WHERE BANFN = X_BANFN.
ENDIF.
LOOP AT IT_EBAN.
IF IT_EBAN-EBELN = '' AND IT_EBAN-LOEKZ = ''.
CONCATENATE 'PR' IT_EBAN-BANFN 'is not converted to PO.TECO is disallowed' INTO STR SEPARATED BY SPACE.
MESSAGE STR TYPE 'E'.
ENDIF.
ENDLOOP. -
"System status AALK is active" and "System status LKD is active" errors
Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.
-
Hi All,
we want to change the sales order system satus, then we found we can only do it in item level.since in one sales order we may have many items, if we change the system status by manually one item by one item, it cost time, I wonder in SAP 6.0 if we can do batch change sales order system status? If have, please tell me how to do it?
Regards,
JaganHi Raj,
Thank you for the reply.The problem here is there are 100 line items in a sales order and user wants to change the item status (in the status tab in item level data) from A3-A4 ( example here is A0-SO created,A1-SO changed,A2-SO released,A3-PO created,A4-Delivery created,A5-SO closed) for all line items.In this Sales order 10 line items have not got the Goods receipt.But all other items have got.So he dont want to go to each and every line item to check and update the status of the GR,since it is time consuming process.So he is looking for the possibility in the header level like when he update the status in Heder level,it has to change the status in item level or if any item is not relevent for status change from A3-A4 (means the item present status is not in A3) it should throw a message.
Regards,
Jagan -
PP-PI - System status LKD for a process order - how to set/unset it
Hi gurus,
I need some help.
I have to lock / unlock process orders inside a program (not manually).
I would like to do this without using Batch Inputs, which are not reliable.
I know the function STATUS_CHANGE_INTERN can modify the order status; but I don't know if the result I get is the same I get doing manually: "Process order" --> "Functions" --> "Restrict processing" --> "Lock"/"Unlock".
Can anybody help me?
Thanks in advance.
J.Hi
I found this thread which is talking about Internal Order Status change and also a solution for the same.
[Status change|http://forums.sdn.sap.com/thread.jspa?threadID=1516496]
Br,
Vijay V -
Internal Order -Systeme Requirement
Internal Order accounting provides you with a comprehensive suite of features such as status management, commitments management, detailed reports, and analysis that helps you monitor your jobs through their entire lifecycles
Give me the T-Codes for the above system requirement
Thanks
PrathimaHi,
Check following tcodes
KOB1 - Orders: Actual Line Items
KOB2 - Orders: Commitment Line Items
KOBP - Orders: Plan Line Items
KOB4 - Orders: Budget Line Items
S_ALR_87013008 - Summarization Object: Actual/Plan/Commitment -
Production order system status after being settled
Hello,
I am currently in ECC 605 project. I remembered once production order is variance calculated and settled,new system status, VCAL , is set at production order. And sometimes the production order won't be set with status VCAL even though it's variance calcualted. Does anyone have any experience at ECC release 605? Is it normal that settled order doesn't possess VCAL status?
And another weird behavior is that production order can be settled without variance calculated. At earlier release, system will
pop up error message if I try to settle a production order which isn't variance calculated. Can anyone confirm if at release 605 it's normal system behavior that system won't block order settlement of production order which variance calculation isn't done yet?
B. Regards,
Nancy
Edited by: Nancy Lin on Jul 14, 2011 9:45 PMHi Rose,
Try out ..
STATUS_READ
http://www.sap-basis-abap.com/sappp016.htm
Re: Status of the Production Order
Re: Production order status
Hope it will solve ur problem
Thanks & Regards
ilesh 24x7 -
Changin work order system status via FM BAPI_ALM_ORDER_MAINTAIN
Hello,
I've succeeded to change work order user status via FM BAPI_ALM_ORDER_MAINTAIN.
Is it also possible to change the system status with the same FM?
Thanks
MosheCheck STATUS_CHANGE_INTERN_MULTI & STATUS_CHANGE_INTERN
-
How to reset Work Order System Status -NCMP Not completed
Hi Friends,
Please can anyone guide me how do I reset / revert the NCMP (Not completed) System Status of the Work Order. The System Status comes after I have done the Function of "Do Not Execute".
Thanks in Advance.
AnantHi,
1. You cannot reset it back . For future cases ensure to grey out the option using Transaction Variants SHD0 for IW31/IW32 Tcodes
2.Steps to create transaction variant http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true
3.You can also explore user exit :IWO10026 User check on setting status 'Do not perform'
regards
pushpa -
SET PM WOrk Order System Status to TECO
Good Afternoon SAP PLM Forum users,
Will you please tell me the best method to Technically complete (set system status to TECO) 85,000 PM orders that have system status REL and CNF or PCNF.
Thanking you in advance
LeslieHi,
You could use IW38 to select and generate a list of orders. Then from the output screen highlite a group of orders and choose the complete function.
Also BAPI_ALM_ORDER_MAINTAIN method TECHNICALCOMPLETE could be used with later releases.
-Paul
Thread moved to EAM forum -
Internal Order with status as Released not allowing postings
Hi Experts,
We are trying to interface expense reports against Internal orders wherein the IO is in REL GMPS status but is rejecting the ERs.
Can we have the possible reasons for the same?Hi..
You define user status management as below.(IMG Menu path : Internal order>Order master Data>Status Management)
-. If you select Status number “10”, SAP don’t allow FI posting.
-. If you select Status number “20”, SAP allow FI posting.
After you assing above user status to order type, you create internal order and you can control FI posting as below.
Maybe you are looking for
-
Hi i created a bpm scenario according to the blog "RFC Scenario using BPM --Starter Kit" by Arpit Seth. I get the file into XI successfully, but after this first step nothing else happens. In the SXMB_MONI i have only one successful message that read
-
When installing the trial version of Flash Builder 4 how does a newbie know what to choose as a back end? Someone who just wants to "learn Flex in a week"? Is there a FAQ somewhere, or do we need to post every question? Thanks!
-
Hi~ everyone everytime i start Safari it crash at the beginning. Here ist the error report: Date/Time: 2009-04-02 20:58:15.098 +0800 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: Safari Path: /Applications/Safari.app/Contents/MacOS/Saf
-
NPE while starting Node Manager in SOA 11.1.1.5
I have installed SOA Suite 11g (11.1.1.5) as per Oracle Quick Start Guide for SOA Suite 11.1.1.5. I start the database and Weblogic admin server. When I try to start the node manager, I am getting following error: 1 Nov, 2011 9:23:28 AM weblogic.node
-
Report naming conventions?
what are these report naming conventions that show/get prefixed to items etc. by default in the object navigator. 1) Q_ is Query 2) G_ is Group 3) M_ is ? 4) R_ is ? 5) F_ is ? 6) B_ is ?