Internal orders - Plan Line items are not uploading into SAP!!

Hi Experts,
Am uploading the budget values as plan line items of Internal orders(AUFK table) from my Z prog. by using BAPI_COSTACTPLN_POSTPRIMCOST.......in Return table(bapiret2), am not getting any error messages........so, am taking it for granted that, upload is successful.
But, when I went to KOBP transaction.........I did not see any values for the internal order in question.......but, just now, I uploaded successfullly!!
Let me know that, Why its happening like that? How to fix it?
replies appreciated, thanq.

I've lil doubt if this BAPI really update the internal orders in KOBP transaction.
However just refer:
bapi_costactpln_postprimcost
Use BAPI_COSTACTPLN_POSTPRIMCOST
And refer relevant OSS which is mentioned in Above threads.

Similar Messages

  • Internal Order Plan Line Items not appearing in KOBP

    Hi,
    I have entered internal order plan using transaction KPF6.  I can then see it in reports like S_ALR_87012993, S_ALR_87012996, etc.  In these reports, when I double-click on an item, it opens up another window which enables us to select order actual line items, order plan line items, etc.  Once I click on order plan line items, system automatically takes me to transaction KOBP and displays the line item.
    What is surprising is, instead of going thru all the above, if I directly execute transaction code KOBP, I do not see the plan line item.  I have seen a similar issue in another forum (link hereunder) and apparently the issue there was with planner profile.  In my case, I am sure I have entered plan and trying to retrieve the line item (using KOBP) with the same planner profile.
    Internal orders - Plan Line items are not uploading into SAP!!
    I have also checked that the authorization group assigned to the planner profile is blank and that is the authorization group my user ID is assigned to.
    Any thoughts!
    Thank you,
    Srikanth

    Hi Srikanth Tamma,
    After going through you thread, I have tried entire process in my system and it is working fine....
    I don't see any problem...
    Are you using BAPI or Excel Upload for your planning?
    Srikanth Munnaluri

  • Sales order some line items are showing not relavant

    Hi SD Guys,
    In sales order some line items are showing not relavant.
    Why are they showing a status of not complete or "not relevant"?
    Thanks
    Sunny

    Hi sunny,
                     plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
    regards,
    ram.

  • Asset Line items are not updating in table ANEP

    Hi friends,
    I found that asset line items are not getting updated in ANEP table,.
    This is my precedure for posting of depreciation.
    I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
    In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
    Where is the mistake in my process..
    thanks in advance..
    Naveen

    HI Naveen
    The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
    ANEA should be the solution you are looking for.
    Hope it helps!
    Cheers
    Z

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Line items are not coming on next page in Bill of Lading

    When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
    I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
    Kindly help me to resolve the issue as it is very critical.

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Line items are not appearing for some users

    Hi
    In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
    Regards
    John.

    Hi,
    What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
    Please clarify your issue.
    Regards,
    RS

  • SCs line items are getting splitted into different POs.

    Hi Experts,
    I am using SRM 5.0 (EBP4.0) ECS.
    When operational purchaser is doing carry out sourcing then SC line items are getting splitted into different POs whereas all the criteria are same I mean all the SC line items are having same
    1.Purcg.Grp
    2.Purch.Org.
    3.Company Code
    4.Plant/Location
    5.Vendor (Preferred)
    6.All product Cat.are assigned to one system only.
    (In BBP_PD for the SC I dont see any reason for the split)
    7.Using Intended for Gouping Option also at the time of Carry out sourcing.
    Earlier also I have raised the same question but I didnt get any reply, only some hints and other reference and help bu Yann but I am still facing the same issue and Pls help me if there is any OSS note for it .
    Here I'd like to let you know that I have seen same ticket and checked all the possible cause for split but never find any reason for split in this case.Pls help me on this issue urgently.
    Brgds
    Gopesh

    Hi
    As Yann told, there might be some standard BADIs for which we need to either modify the standard code in this case.
    Has SAP replied on this problem with any comments - on your OSS message yet ?
    <u>As far as I know, the following BADIs are some how, involved in the creation of the Local SRM PO. </u> 
    <b>BBP_ECS_PO_OUT_BADI </b>
    ( ECS: PO Transfer to Logistics Backend                  )
    <b>BBP_EXTLOCALPO_BADI </b>
    ( Control Extended Classic Scenario                   )
    <b>BBP_GROUP_LOC_PO   </b> 
    ( Exit Grouping of Items for Local Purchase Orders    )
    Please send me your detailed requirements at my email id for further analysis.
    [email protected]
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • 2LIS_02_ITM deleted line items are not reflected in BW

    Hi,
    Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
    I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
    In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
    If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
    I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
    Thanks

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • TDS liability line items are not picking in u2013 J1INCHLN

    Hi Experts
    During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
    We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
    One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
    Pl help ASAP.
    Regards
    Kuldeep Dubey

    check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
    without business place in TDS line items you can't make the TDS payment.
    Regards
    Akmal

  • TDS line items are not getting reflected in J1INCHLN

    Hi Experts,
    While generating TDS challan we are not getting advance line items in J1INCHLN screen
    We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
    Below is the example
    XYZ                                                                         43,000.00
    XYZ                                                                         46,000.00
    Bank                                                                        96,329.00-
    S/Tax Interim-In Cr                                                    5,160.00
    S/Tax Interim-In Cr                                                   3,864.00
    ST Interim E.C-In Cr                                                 103.00
    ST Interim E.C-In Cr                                                 77.00
    ST Inter H E.C-In Cr                                                 52.00
    ST Inter H E.C-In Cr                                                 39.00
    TDS Pble Contractors                                              966.00-
    TDS Pble Contractors                                              1,000.00-
    I checked the below possibilities for reason why its not getting reflected
    Vendor master having recipient type
    WITH_ITEM table updated with recipient type
    In the line item also having Business Place and section code
    Please suggest me is there any way to resolve the issue.
    Thanks & Regards,
    AIM

    Hi,
    Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
    If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
    Regards
    Divya S

  • TDS line items are not Display in FB60

    Hi Experts,
    when in simulate a document in  T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed.  when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
    why not shown in FB60 when simulating a document??

    Hi
    If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
    Regards
    Sanil Bhandari
    <a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60

  • Special Ledger: Open Line items are not being loaded in BW

    Hi all.
    We are loading Special Ledger information from R/3 to BW, and for many accounts, the data is not reconciling between the two systems.
    We have found out that none of the Open Line Items are being transferred.
    Do you know which could be the cause for this?
    Thanks and Regards

    Hi Daniel,
    Could you give some more details about the extractors and the "Open Line Items"?
    -Bikas

  • Line items are not appearing while processing F-44

    With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
    Please help

    Hello,
    There are two line items in the Vendor account, the details are as follows:
    Date             Amount                  PK                 DR/Cr
    31.03.2008   12,050.00                38                      Cr
    05.06.2008   12,050.00                28                      Dr
    of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND"

  • Line items are not summarized due to taxes

    Hi Friends,
    According to note no:36353,I maintained settings in OBCY and sales revenues,deductions are summarized if my billing document(VF01) having above 999lineitems.But if my customer is liable for taxes, then revenues,deductions are not summarizing in accouting document if line items are more than 999 and I am unable to release it to accounting(VF02).
    Can some one please advice me.
    regards,
    Seetaram

    HI,
    In my billing document (customer is liable for taxes)I have two tax condition types, one is JR1 & UTXJ, but both conditon type values are ZERO.So zero value is not posted to any G/L account.But my issue is when these two conditon types are appearing in billing document, I am unable to release billing document (VF02)to Accounting if more than 999 line items are there.
    If above two conditon types are not there ( it customer is not liable for taxes)in billing document, I am able to release billing document to accounting if line items are more than 999.
    someone please advice me.
    regards,
    Seetaram

Maybe you are looking for

  • HT5071 How can I see how many times my free book has been downloaded?

    I would like to know how many people have downloaded my free ibook, but I can't find that information.  I am a complete novice at this, so please give detailed answers.  For example, I do not know how to log into my ibooks account.  Thanks.

  • Downloading photos to IPOD results in "The iPod cannot be updated." message

    iPod has update 2006-01-10 Using iTunes>Edit>Preferences>iPod>Photos (1) Selected option "Choose folder" iPod finds 16 photos (2)Click OK iPod returns message: "The iPod "Dom's" cannot be updates. The disk could not be written from or written to."

  • Cisco 3850 Mobility Agent unable to connect clients

    Hi We are trying to use Cisco 3850 as Mobility agents with 5760. We can't seem to get the clients to authenticate to the radius server. We don't even see them appear in the radius logs. We have defined the radius server and the profile wlan Wireless

  • Why does it cost $700 to upgrade to an iPhone?

    Okay, let me tell you this story from the beginning..... In December of 2013, I wanted an iPhone 5c. My current basic phone was acting up, so my dad wanted to get a replacement. Instead, Verizon (without telling my dad) marked this as an upgrade... M

  • Dynamic Image Pulled From Web?

    Is there any way to get Keynote to pull an image from a website and put it in a looping presentation and update it every so often? I use Keynote for an always looping TV "infochannel" and I'm looking to pull a weather radar image off the web and disp