Internal PC HD to Macbook data transfer

I have a western digital 160BG HD that I bought and put into my Compaq desktop. Very similar to this (see link).
http://www.bestbuy.com/site/olspage.jsp?skuId=7821949&type=product&productCatego ryId=pcmcat107700050004&id=1142294266684
The desktop crashed and I bought a macbook. I pulled out the HD and trashed the comp. I now want to transer the data to my macbook. There is no USB port on the hard drive (it was an internal). Is there any way that I can connect this to my macbook and transfer the data? I have also heard that I can get a network storage device that will hold this type of drive and I can just hold my HD as a network drive. Basically, I just want to be able to get to the data on the internal HD that is now collecting dust. Can anyone help? Thanks in advance.

If the hard drive you linked to is the drive you have, you can get an external SATA drive enclosure. Depending on your preference, you can get one that connects via USB, Firewire, or both (the choice is yours). You just need to make sure that you get an SATA enclosure. Here are some examples:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=200009009210538071231054107131&name=SATA

Similar Messages

Replacing iBook with MacBook, data transfer concerns

My mother will be getting a new MacBook later this week, replacing her current iBook (500 Mhz, MacOS 10.3.9).
I will be left to transfer everything over. Her old iBook has one user account: it is used by both my mother and my father. I was thinking about adding an extra "admin" account to the new MacBook for possible troubleshooting purposes.
What is the easiest, most effective way to transfer everything over harmoniously? The iBook has Airport printing problems, so I do not want to risk transplanting them as well. I would prefer to start over from scratch by installing all-new drivers.
Any tips? Is it as simple as transferring everything over using FireWire Target Disk mode?
What about the username? I was thinking about changing their username on their user account (Apple's setup assistant took their name last time and cobbled its own username automatically.) Will this disrupt anything?

Migration Assistant is a simple way, but if you plan to create different accounts then you should not bother moving the old one. Otherwise, do not create a new account with the same name. Migration Assistant will not overwrite an account of the same name. You should also take care what you migrate because some PowerPC items on the iBook could overwrite Intel items on the new MacBook. This would be a big problem.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Written by Kappy with additional contributions from a brody.

I need a data transfer from intact hard drive of older macbook that won't boot. Can Apple provide this service even though my one to one membership has expired?

I need a data transfer from a 2005 Macbook to my new one (2010). I damaged the old laptop and although it wouldn't turn on, when I brought it to the Apple Store they ascertained that the hard drive was still intact. They said I needed to purchase a one to one membership to get a data transfer, which I did, but somehow forgot about it and now it's expired. Is there any way I can still get the data from the old hard drive transferred to my new macbook? Can Apple provide this service even though my one to one membership has expired?

Go to OWC where you can purchase a suitable enclosure for the drive. You will need an enclosure for a SATA notebook drive. This is assuming the old computer is a MacBook and not an iBook. I make this observation because the first MacBook was released in 2006, not in 2005. If yours is a 2005 model then it's an iBook and uses an ATA interface.
Install the old drive in the enclosure, connect to your new computer. You can then transfer your data.

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

MacBook Pro Data Transfer

My MacBook Pro will not boot up and before I send it away to be fixed, I would like to do a data transfer to another computer. I would prefer not to have to pay for someone else to the data transfer so I would like to attempt it myself. Can I just use a SATA to USB cable converter to do transfer the files to another computer or is there something special that I have to use for a Mac?
Any input would be greatly appreciated! Thank you!

I'm going to pay for the repair; other than this recent hiccup with the logic board, the computer still works completely fine. When I bought my newer MBP, I gave the now-broken one to my parents and it still fulfills their needs.
I was trying to do the data transfer myself because, honestly, I did not want to spend the money to pay Apple to do it. The guy at the Genius Bar made it sound like it was pretty simple. However, if you think that it is not for amatuers, I will check out having a professional do it.
I thought about doing the HD swap but the price of another drive is about the price of just having Apple do the transfer completely. I thought about using the current HD as another external HD but I have quite a few of those already.

Dual Drive (SSD) Macbook pro, Data Transfer from SSD to SSD Slow

hello,
I have in my Macbook (early 2011 / 2.3 I5, 8gb ram) a new SSD (Samsung 1TB Evo 840) installed.The old still-functioning SSD (Crucial m4 512GB) i built with an iFixit kit (Dual Drive) in the Optical drive Bay. The two SSD are working.
My problem is this: the data transfer between the plates (a copy Iphoto Library approx 252Gb) is very slow (252 gb approx 5hours).
Does anyone have any idea what could be the problem?

One of the bigger problems with migrating from PowerPC to Intel is not the operating system, but the chip. Migration Assistant has been known to fail for unknown reasons when moving between the Mac platforms. Instead, this user tip has been recommended to avoid such issues:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0

Internal Disk to Disk Data Transfer Speed Very Slow

I have a G5 Xserve running Tiger with all updates applied that has recently started experiencing very slow Drive to Drive Data transfer speeds.
When transferring data from one drive to another ( Internal to Internal, Internal to USB, Internal, Internal to FW, USB to USB or any other combination of the three ) we only are getting about 2GB / hr transfer speeds.
I initially thought the internal drive was going bad. I tested the drive and found some minor header issues etc... that were able to be repaired so I replace the internal boot drive
I tested and immediately got the same issue.
I also tried booting from a FW drive and I got the same issue.
If I connect to the server over the ethernet network, I get what I would expect to be typical data transfer rates of about 20GB+ / hr. Much higher than the internal rates and I am copying data from the same internal drives so I really don't think the drive is the issue.
I called AppleCare and discussed the issue with them. They said it sounded like a controller issue so I purchased a replacement MLB from them. After replacing the drive data transfer speeds jumped back to normal for about a day maybe two.
Now we are back to experiencing slow data transfer speeds internally ( 2GB / hr ) and normal transfer speeds ( 20GB+ / hr ) over the network.
Any ideas on what might be causing the problem would be appreciated

As suggested, do check for other I/O load on the spindles. And check for general system load.
I don't know of a good GUI in-built I/O monitor here (and particularly for Tiger Server), though there is iopending and DTrace and Apple-provided [performance scripts|http://support.apple.com/kb/HT1992] with Leopard and Leopard Server. top would show you busy processes.
Also look for memory errors and memory constraints and check for anything interesting in the contents of the system logs.
The next spot after the controllers (and it's usually my first "hardware" stop for these sorts of cases, and usually before swapping the motherboard) are the disks that are involved, and whatever widgets are in the PCI slots. Loose cables, bad cables, and spindle-swaps. Yes, disks can sometimes slow down like this, and that's not usually a Good Thing. I know you think this isn't the disks, but that's one of the remaining common hardware factors. And don't presume any SMART disk monitoring has predictive value; SMART can miss a number of these cases.
(Sometimes you have to use the classic "field service" technique of swapping parts and of shutting down software pieces until the problem goes away. Then work from there.)
And the other question is around how much time and effort should be spent on this Xserve G5 box; whether you're now in the market for a replacement G5 box or a newer Intel Xserve box as a more cost-effective solution.
(How current and how reliable is your disk archive?)

Internal Data Transfer to Funds Management

Hello All,
We are implementing the Funds Management in the middle of the Fiscal year, now all the settings are done and budget also uploaded.
Now my question is How to convert the previous documents into funds management which were posted from the year starting 01.04.2008.(FI and MM documents including park documents)
For this I am refering the following IMG steps, i.e Internal Data Transfer to Funds Management-Supplementary Account Assignment-Select Documents-Convert Worklist-Display Worklist
Here I am unable to understand what is happening in the first step and second step
Can any one pls clarify and give correct solution
Regards
Uma

Hello Uma,
In PSM-FM you have similar processes in two-steps (select and run), first selecting the data and after that processing the data.
In the step "Select Documents" (step 1) you select the documents, based on your selection criteria, for which you want to provide a supplementary account assignment within your company code. The documents selected are displayed in a worklist.
You can provide the documents with a supplementary account assignment in an additional step by converting the worklist (step 2).
In the Convert Worklist section (step 2), you add account assignments to the documents contained in the work list (generated by the step 1) for your FM area. The documents to which an account assignment is added are displayed in a list which shows the original account assignment and the changed account assignment for each document.
With each program run, the system assigns a run number. You can use this run number as a selection criterion for selective deletion or selective display of the work list. This is very useful if you do not want to do the running process (convert worklist) in one step, you can convert in more than one step.
To convert (step 2) you must first have selected the documents (step 1) to which you want to add an account assignment.
For example, you can in the step 1 select ALL the documents that you want to convert and in the step 2 you can split in more than one process (due to performance or checking reasons) the data generated in the step 1.
The option "Display Worklist" is to check the worklist generated in the step 1 for a specific FM area based on particular selection criteria. If no data was deleted from the worklist, the worklist contains all the information on the supplementary account assignment:
The system assigns a run number during each program run for converting the work list. You can use this number as a selection criterion when displaying the work list.
You can display these documents by starting the program without specifying a run number.
You can test this process with a single document in step 1 and step2 and you will see that the step 1 only makes the document as selected and the real change will happen in the step2.
I hope I could clarify the process
Best Regards,
Vanessa.

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

International- Data Transfer

Be careful about using your phone for data transfer in Europe! I Just got back from a 2-week trip to Europe with my family of four- we all brought our iPhones. I had international roaming- World Traveller- turned on before we left. I was told that phone calls would be $1.99 per minute and data transfer (Internet, email, etc.) would be unlimited because we already pay the $20 for that. It turns out it is NOT unlimited. We just got a bill for $3700. AT&T has agreed they told us wrong and they will credit our data usage charges but I'm still not sure it is really going to happen. They have since instituted a new plan something like this: International Data Transfer is about $20 per month for about 15mb of data. But there is a 1 year commitment for this plan. Hopefully, they will revise this plan to something more useful.

Yesterday afternoon the advice I received from AT&T was to call and have the data part of the phone turned off while traveling. That would, I was told, keep me from getting a big bill. This morning I telephoned again to ask about wi fi, and was told, essentially, that if wi fi is free where I am, there would be no charge for web browsing or reading and sending email. Also, I was told that the advice I received yesterday was incorrect. The way to keep from getting the data charges that are very large is to go to mail settings and for each account, to turn it "off." That way the phone will not look for email. Presumably not clicking the Safari icon is a part of this plan. So the work around today sounds like it is to use free wi fi if you can find it.

Is data transfer included in the 90-day tech support which comes with a new MacBook Air?

I would think so. A friend is buying a new MacBook Air, and needs to know if data transfer is included in the 90-day technical support offer from Apple. I'm pretty sure it is, but just would like to make sure I'm steering her in the right direction.
Thanks.

Instructions yes, performing the actual data transfer, not likely. Here are a couple of links that may be useful:
http://pondini.org/OSX/Setup.html
http://support.apple.com/kb/HT5872
Ciao.

Data transfer from ALV-Grid to internal table

Hello,
I use an editable alv-grid in my program. But the data changes in the alv-grid are not transferred back to the internal table which stores the data of the alv-grid. Is there a function I have to call to transfer the data or is there a property in the alv-grid I have to set? Thanks.
Regards, Lars.

Hi
The problem is if you back from grid, the system doesn't trigger the PAI of grid, so your changing aren't moved to internal table.
You should press some button of grid bar to update your internal table. So it should be better you insert a SAVE button in your status to update the changing.
Max
Message was edited by: max bianchi
Message was edited by: max bianchi

Internal candidates Data transfer in E recruiting..Urgent

Hi experts,
How to transfer internal candidate's data from E-recruting to PA??
Please reply its urgent
Thanks
Sameer
Edited by: sameer dhuke on Mar 17, 2008 9:54 AM

Hi sameer,
you have to go to the ecc to hire the person as the information from e-recruiting is far not enough to process a hiring. currently standard data transfer brings ~15 fields to the ecc while the complete hiring action will probably have >100 fields.
To do the hiring from e-recruiting you would have not only get the information into e-recruiting first, but also get all the business logic combined. Things which sound easy can get quite complicated e.g. the name. In all projects i took part so far firstname is no required field as the companies attract applicants from around the world and there are countries where having only one name is common. So firstname can't be a required field in e-recruiting but in PA the field is required as it is necessary for social insurance, taxes and stuff (these people really get a second name to be processed when getting a work permit). You would have to get all the logic on country specific name requirements to e-recruiting. Furthermore you separate the systems to separate the data. Data security guys would get crazy if you could run complete hiring actions / organizational change action from e-recruiting accessing payment data, banking information, CB information, information on related persons ... .
For additional documents I have to disappoint you. I do not have more than the standard stuff you get from sap net rest of my knowledge results from various rollouts.
Best Regards
Roman

TS2518 license number has to be reentered every time I open Aperture after having data transfer done by Apple store to a new macbook pro. How do I get the license number saved?

I have to re-enter my Aperture license number and upgrade number every time I open Aperture after buying a new MacBook Pro and paying for the data transfer to be done at the Apple store. I can understand having to do this the first time but not every time. How can I get the license number saved?

Aperture 3.4.3 update specifically claims to fix the serial number problem. See the Release notes.
If you've already done the update and still have the problem, read this forum post about the same topic and a solution.

How to find the max data transfer rate(disk speed) supported by mobo?

I plan on replacing my current HDD with a new and bigger HDD.
For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something?
Here's dmidecode:
# dmidecode 2.11
SMBIOS 2.5 present.
80 structures occupying 2858 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 101 bytes
OEM-specific Type
Header and Data:
DA 65 00 DA B2 00 17 4B 0E 38 00 00 80 00 80 01
00 02 80 02 80 01 00 00 A0 00 A0 01 00 58 00 58
00 01 00 59 00 59 00 01 00 75 01 75 01 01 00 76
01 76 01 01 00 05 80 05 80 01 00 D1 01 19 00 01
00 15 02 19 00 02 00 1B 00 19 00 03 00 19 00 19
00 00 00 4A 02 4A 02 01 00 0C 80 0C 80 01 00 FF
FF 00 00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B2 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A17
Release Date: 04/06/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 17.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 755
Version: Not Specified
UUID: 44454C4C-5900-1050-8033-C4C04F434731
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PU052
Version:
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Space-saving
Lock: Not Present
Version: Not Specified
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 76 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 23, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 0.0 V
External Clock: 1333 MHz
Max Speed: 5200 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: Socket LGA775
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 6144 kB
Maximum Size: 6144 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB8
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x090A, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x1 Proprietary
Current Usage: In Use
Length: Long
Characteristics:
PME signal is supported
Handle 0x0901, DMI type 126, 13 bytes
Inactive
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Disabled
Description: Intel Graphics Media Accelerator 950
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel Gigabit Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF01000
Status: Valid, Not Full
Change Token: 0x00000018
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: AD00000000000000
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FDFFFFFF
Range Size: 4064 MB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 1
Interleaved Data Depth: 1
Handle 0x1402, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x1102
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1403, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FDFFFFFF
Range Size: 2016 MB
Physical Device Handle: 0x1103
Memory Array Mapped Address Handle: 0x1300
Partition Row Position: 1
Interleave Position: 2
Interleaved Data Depth: 1
Handle 0x1410, DMI type 126, 19 bytes
Inactive
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD01
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x8100, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 00 81 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8200, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 00 82 24 41 4D 54 01 01 00 00 01 A5 0B 02
00 00 00 00
Handle 0x8300, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 00 83 14 00 00 00 00 00 C0 29 05 00 00 00
F8 00 4E 24 00 00 00 00 0D 00 00 00 02 00 03 00
19 04 14 00 01 00 01 02 C8 00 BD 10 00 00 00 00
00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 5A 5A
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 11 02
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 9B 00 25 3F 40 9C 00 25 3F 00 09 01
25 3F 80 A1 00 26 F3 00 A2 00 26 F3 08 A3 00 26
F3 04 9F 00 26 FD 02 A0 00 26 FD 00 9D 00 11 FB
04 9E 00 11 FB 00 54 01 23 7F 00 55 01 23 7F 80
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01
A0 78 F5 00 93 00 7B 7F 80 94 00 7B 7F 00 8A 00
37 DF 20 8B 00 37 DF 00 03 C0 67 00 05 FF FF 00
00 00
Handle 0xD401, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
02 2E 00 59 FC 00 6E 00 59 FC 01 E0 01 59 FC 03
28 00 59 3F 00 29 00 59 3F 40 2A 00 59 3F 80 2B
00 5A 00 00 2C 00 5B 00 00 55 00 59 F3 00 6D 00
59 F3 04 8E 00 59 F3 08 8F 00 59 F3 00 00 00 55
FB 04 00 00 55 FB 00 23 00 55 7F 00 22 00 55 7F
80 F5 00 58 BF 40 F6 00 58 BF 00 EB 00 55 FE 00
EA 00 55 FE 01 40 01 54 EF 00 41 01 54 EF 10 ED
00 54 F7 00 F0 00 54 F7 08 4A 01 53 DF 00 4B 01
53 DF 20 4C 01 53 7F 00 4D 01 53 7F 80 68 01 56
BF 00 69 01 56 BF 40 FF FF 00 00 00
Handle 0xD402, DMI type 212, 152 bytes
OEM-specific Type
Header and Data:
D4 98 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 97 00 22 FB 00 98 00 22 FB 04
90 00 11 CF 00 91 00 11 CF 20 92 00 11 CF 10 E2
00 27 7F 00 E3 00 27 7F 80 E4 00 27 BF 00 E5 00
27 BF 40 D1 00 22 7F 80 D2 00 22 7F 00 45 01 22
BF 40 44 01 22 BF 00 36 01 21 F1 06 37 01 21 F1
02 38 01 21 F1 00 39 01 21 F1 04 2B 01 11 7F 80
2C 01 11 7F 00 4E 01 65 CF 00 4F 01 65 CF 10 D4
01 65 F3 00 D5 01 65 F3 04 D2 01 65 FC 00 D3 01
65 FC 01 FF FF 00 00 00
Handle 0xD403, DMI type 212, 157 bytes
OEM-specific Type
Header and Data:
D4 9D 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 1F 01 52 EF 00 20 01 52 EF 10 21 01
52 BF 00 22 01 52 BF 40 87 00 59 DF 20 88 00 59
DF 00 E8 01 66 FD 00 E9 01 66 FD 02 02 02 53 BF
00 03 02 53 BF 40 04 02 53 EF 00 05 02 53 EF 10
06 02 66 DF 00 07 02 66 DF 20 08 02 66 EF 00 09
02 66 EF 10 17 02 66 F7 00 18 02 66 F7 08 44 02
52 BF 40 45 02 52 BF 00 FF FF 00 00 00
Handle 0xD800, DMI type 126, 9 bytes
Inactive
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE C1 0B 00 00 10 05 19 21 01 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
Hdparm also does not tell me the max data transfer rate (disk speed) of my current drive although this link : www.wdc.com/en/library/sata/2879-001146.pdf says that it is 3.0Gb/s
and here's hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD800JD-75JNC0
Firmware Revision: 06.01C06
Standards:
Supported: 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156250000
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 76293 MBytes
device size with M = 1000*1000: 80000 MBytes (80 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* Gen1 signaling speed (1.5Gb/s)
* Host-initiated interface power management
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Last edited by Inxsible (2011-03-27 04:40:49)

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Internal PC HD to Macbook data transfer

Similar Messages

Maybe you are looking for