Internal PO range with Year Stamp!!
Hello Folks !
My client wants to have unique range for PO numbers for each year. so that they need not free the previous PO range once consumed.
is there any prefix that can be added to the automatic creation of number range (internal), like 09XXXX (where the 4-X are the number range)
And that the prefix is to be changed every year begining......
or any other work around, without going for external number range. the total number of digits for number range not to exceed 6, as it is reflected in the barcode and barcode length is also fixed.
plz ask for more details, if required.
Thanks much in advance
Ashwin
Thanks,
I ll get back to you once it works!
Cheers
Ashwin
Similar Messages
-
To swap internal number range with an External number range
Hi SAP Guru's,
We have a a landscape with SAP which is divided in 2 ERP's.
One being the Central server and other the Local.
The scenario is that when ever i create a maintenance order in the central server a replication should happen in the local server and the order number should be same as that of central server.
And the scenario should be Vice versa i.e whenever the order is created in a local server it should be replicated in the central.
Both the number ranges used in central and local server are different.
I am not able to find out how we can achieve the above stated scenario.
Please advice what should be my POA.
Regards,
AnkitHi ,
1.You have to find the Difference that Wether the order is created using Integration or Manually from the System.
2.The Standard SAP uses Function Module Number_get_next or Badi to fetch the Number and the number is assigned to Order.
Thats how the internal number ranges works .
3.Now your Scenario is to Owerite the Original number given by system by the function module or BADI .
4.Now you find that Plug in Point and Write an Implicit enhancment Point and Owerite the Original value given by System.
So then only you can Owerite the Original Value.
Let me know if you are not clear .
Regards,
Kishor -
Project Name - Internal Number Range
Dear All,
When we create a solman project, manually we give the project name. Want to know whether it is possible to give a internal number range from which the project number should be picked automatically when we create a project.
Thanks and Regards
Saravanan.pHi Saravanan,
You can assign an internal number range with respect to the Project name.
Go to TC <b>CRMC_NR_RA_SERVICE</b>
there by selecting the interval tab you can define the number range in which you want your support desk message corresponding to the project.
hope this will help you out, if not then post your recent error.
Rgds
Manas -
Partner Function in Vendor Master With Internal Number Range
Hello Friends,
I am creating vendor master record with internal no range.I wanted following clarifications.
1.In partner function screen, I want to have same vendor no which i am creating to be assigned automatically to VN.OA PI and GS funtions at the time of its master creation.This is not happening in my case
2.Partner function like VN,OA,PI and GS does not appear automatically whereas i have to select it manually.
Regards
VivekHi,
During defining the partner Schema, please follow the process:
a.Create partner Schema
b.After creation of partner Schema, select your partner Schema and click u201Cpartner roles in schemau201D and you will have next screen
Now for Partner function like VN,OA,PI and GS as you required and select the check box of mandatory
and save.
Now try creating Vendor and you will have Partner function like VN,OA,PI and GS in vendor master.
Note: The following configuration steps for Vendor master are:
1. Create Vendor Account Group.OBD3
2. Maintain Number Ranges from Vendor account Group:XKN1,
3.Assignment of Number ranges to Account Group,OBAS
4.Partner Function: SPRO->MM->Purcahsing->Partner Determination-> partner roles->Permissible partner role sper account group
5.Partner Schema:
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Define partner Schema
6.Assgin partner schema to accont Group
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Assgin partner schema to account Group
Regards,
Biju K -
Create vendor in ERP R/3 with internal number range
HI,
When I create a new vendor from MDM in R/3 with internal number range ADRMAS is processed OK but CREMDM is in status 51 because of missing address data.
According to sap note 1052964 (se below) ADRMAS must be the first IDOC and it should contain the vendor number, but this is not possible with internal number range. How do you overcome this problem and how do I get the vendor number back to MDM?
ALE inbound needs the customer / vendor account number within the ADRMAS IDoc to link the ADRMAS IDoc to the follwing DEBMAS / CREMAS IDoc correctly. Therefore field <OBJ_ID> in ADRMAS segment <E1ADRMAS> must contain exactly the same value as fields <KUNNR> / <LIFNR> in the corresponding DEBMAS / CREMAS IDoc. If this value is not provided, the Business Address Service stores the address but is unable to link the address later on to the corresponding Customer / Vendor.
Kind regards
JonnaWe have worked around these problems in the past. These are the steps we took:
1. We created a custom program to process a CREMDM IDOC. This custom program was pretty simple. It called the function module to process a CREMAS IDOC (IDOC_INPUT_CREDITOR) then did a committ. The program captured the vendor number and then called the function module (IDOC_INPUT_ADRMAS) that processes an ADRMAS IDOC (It plugged in the previously captured Vendor number in the ADRMAS).
2. Using this custom program, it is not necessary in PI to split the CREMDM into a CREMAS and an ADRMAS.
3. The last step in the custom program kicked off transaction MDMV to trigger an outbound CREMDM IDOC back to MDM. This was necessary to update the vendor number in MDM.
Tom Belcher -
How to create a internal material no. range with alpha
Hi,
I want to define a internal material no. range with alpha, such as from MPN001 to MPN999. However, SAP ask me type a number isnot alpha. So, please give me your suggestion. thanks!
Regards
HenryInternal number range with alpha numerics is possible.
In sap standard it is NUMERIC only. No other option.
You can maintan alpha numeric in external number ranges. -
Account group with Internal Number Range
Hello Gurus,
With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
Please correct me if I am wrong and suggest a solution.
Thanks in AdvanceHello friends,
No error message but the next number is getting allocated.
in VD01 or XD01
the following steps r followed.
1. Enter the Account Group
2. Sales Area (New Sales Area for the customer)
3. Reference Customer.
4. Reference Sales Area.
Rather than going to the sales area directly, General area screens are appearing.
Upon saving saving the details New customer number is getting allocated.
I have no clue where I have gone wrong...
looking forward for suggestions.
Regards -
Different Production order number ranges with same order type
Dear Friends,
I am working on live project implementation.I am having four manufacturing plants.I am having one order type say PPLE, I am having two different versions say CM and CN.Now my requirement is can I maintain two different number ranges for same order types within single plant .
number ranges should be like,
Plant Version Number ranges
1210 CM CM121008...
1210 CN CN121008
1220 CM CM121008
1220 CN CN121008
and so on.here first two digit should be version,then plant and year followed by order number .
Regards,
Manoj JadhavHi manoj,
You cant have two different number ranges for an order type in internal number range, but in external number range you can have two diffrent number ranges
for example for one order you can start with CM1210080001 and other starting from CN1210080001.
Just convince the client to have external number range
Regards,
Srini -
Internal no range in BAPI_MATERIAL_SAVEDATA
DEAR FRIENDS,
I am working with creation of material master with BAPI_MATERIAL_SAVEDATA. material is createing but it is taking external material no, but i have to proceed with internal number range.
can any one help me where and how to proceed for that. is the any filed that we have to pass X to make internal and external?
thanks and regards,
venkat suman.Documentation of BAPI_MATERIAL_SAVEDATA.
Only external number assignment is supported for the material number
(MATERIAL). If you want the material number to be assigned
internally, the method BAPI_MATERIAL_GETINTNUMBER must first be
called. This method determines an internal number for the material
to be created. You must enter this internal number in field
HEADDATA-MATERIAL. -
Internal Number Range in Vendor Master(XK01)
Dear Gurus,
During the Initial upload of vendor master in SAP the vendor codes around 3000 vendors were uploaded with an External Number range between 1000000 to 1999999 with an defined group. Now i want to deactivate the External Number range and move on to internal Number range.
With Regards,
Siddharth PosteHi Siddarth Poste,
In OMSJ T- code you can give the vendor no range as internal or external
Regards
M B Raju -
Internal Number range:Issue
Hi,
I am using the internal number range for the employee number creation.
Scenario:
Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
I am able to delete the record (all the associated infotypes) successfully.
Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
I want the new correct employee to have the employee number as 00000013.
Can you please advise?
Regards
ManishGo to Tcode PA04
Click the Status Delete 0000014 Current Number make it as 000013 and hire -
Internal number range( alphanumberic) will be incremented automatically
Dear All,
Will the internal number range (Alphanumberic) of the material master get incremented automatically.
say,
the internal number range we set is AW0000001 to AW9999999. The number range should be incremented
Kindly reply for the querry
Thanks
BakyarajYou can try with material Template.
SPRO --> Logisitics - General -- > Material Master --> Basic Settings -- > Define Out put format for Material Numbers.
Transaction Code : OMSL
Activities
1. Define the length of your material numbers.
2. If required, define a material number template.
3. Specify the form in which you wish to store your material numbers.
For information on how to use the Lexicographical indicator, be sure to read the corresponding documentation.
4. Specify whether your material numbers are to contain leading zeros.
Note
If the Lexicographical indicator is set, the system ignores the setting of the Leading zeros indicator.
Indicator for lexicographical material numbers
Definition
Defines the way numeric material numbers are stored in the database.
Use
Caution
It is only possible to set or reset (cancel) this indicator if no numeric material numbers have been used yet in the system since they would no longer be interpretable after setting or resetting this indicator.
If this indicator is not set, numeric material numbers are padded with leading zeros and stored right-justified (example 1). Material numbers containing at least one nonnumeric character are stored left-justified (example 2).
Example 1
Defined length: 8 characters
Internally/externally assigned number: 123
Stored number: 000000000000000123
Example 2
Defined length: 8 characters
Externally assigned number: 1A3
Stored number: 1A3
If this indicator is set, material numbers are stored as follows:
If the material number (numeric or not purely numeric) was assigned externally, it is stored left-justified as entered.
Example
Defined length: 8 characters
Externally assigned number: 123
Stored number: 123
Note
Any leading zeros that may have been entered are stored too. This makes it possible to distinguish between the material numbers 123 and 0123.
If the material number (numeric only) was assigned internally, it is padded with leading zeros to the defined length and stored left-justified.
Example
Defined length: 8 characters
Internally assigned number: 123
Stored number: 00000123 -
hi,
some body tell me the transaction code for copy of the Internal Number Range for EWT from one year to another year
regards
sapfanHi,
use t.code:J1INUMBER for internal challan number creation, u can't copy from one year to another year.
regards
sai krishna -
Copy of Internal Number Range of extended withholding tax
hi,
Can any one tell me the transaction code for copy of the Internal Number Range for extended withholding tax from one year to another year
points will be assigned
thanks in advancehi,
use t.code:J1INUMBER
all the best
Prasad -
Diiferenet Internal Number Ranges by Depot(Plant) wise
Hi Experts,
I have a requirement in SD for Different Internal Number ranges by Depot(plant wise.
For example, my client having 8 depots(Plants). For each Depot client need different number range, means for depot 1 client need one range that is 9000 to 10000. For depot 2 client need number range like 10001 to 20000 like this for 8 depots but document type(sales order, billing, delivery, invoice) is same for 8 depots. How can i achieve this?
As I am fresher I am not getting any clue. If any one did this please provide me the details how to achieve this.
Thanks & Regards,
Muralikrishna
Moderator Message: Do some R&D of your own first.
Edited by: kishan P on Nov 15, 2010 2:24 PMHi Gnana Kumar,
I seen this link, here mentioned that develop the z table with fields like VKORG, FKART, NUMKI. Can I add Depot(plant) filed also?
and here client is having only one Sales Organization.
Thanks & Regards,
Muralikrishna
Maybe you are looking for
-
ORA-00444 & ORA-07446 while startup nomount with pfile(DB installation)
Hi I am trying to create a single instance 10g database in a rac machine (SOLARIS) I had setuped the pfile and create DB scripts too. When I try startup nomount with pfile its throwing below error. $ $ sqlplus SQL*Plus: Release 10.2.0.4.0 - Productio
-
HT1338 trying to update my iphone software
trying to update my iphone it says in my software update
-
Perhaps then is when I start using Firefox again. I don't like the idea of having to have a different browser for each different thing I want a browser to do, that would be rediculous. What other details could you possibly need? I like having the cho
-
'RH_STRUC_GET' FM problem.
Hello, I have a problem with the 'RH_STRUC_GET' FM. it crashed when the number of object in my evaluation path the FM crash our server. Is there any way to bypass this FM ? another FM maybe ?? If anyone can help Quentin
-
Disconnect wi fi at vpn authorization
Hi everyone. I have next problem: If I connect to vpn server via wifi then authorization does not work If I connect to vpn server via patch cord then the connection is established. What could be the problem? Please help me( connection diagram: