Internal Requisitions - how to make them systematic

Need some IProc & GL/AP guru's to help .....
I want to process Internal Requisitions systematically once the PO has been generated through iProcurement, however, my Company only has General Ledger, Account Payables and iProcurement(core Purchasing) modules implemented.
Processing Internal Requisitions is easy enough to PO generation stage. i.e.
1. Setup the internal supplying department as a supplier.
2. Generate appropriate internal catalogues.
3. Follow standard Requisition process to generate PO.
Now the tricky part, how do I bypass AP (invoice processing is currently 3 way matching) so the internal department supplying the Item will automatically receive the appropriate credit to their cost centre.
I don't want to create a manual process,(i.e. manually input invoice) and hoped this could be done systematically.
Cheers for any help or thoughts....
Scott

Hi,
Have you tried auto Invoice generation option available at Supplier/Supplier Site level when a Receipt is made.

Similar Messages

HT5772 In the Podcasts, there are a tons of files downloadable from iCloud appearing in iTunes. How to make them disappear? Thanks

When you register for a podcast, the list of past podacsts appears in the podcast. Sometime, ther's a ton of it. How to make them go?
Thanks

If you go to settings>music there should be a setting to show all music. Turn that off, and the cloud purchases should disappear. You may need to restart the phone to take efect

Hi I have got a problem where when I'm on safari i get these virus pop ups asking me to down load this and that and i don't know how to make them stop.

Hi I have got a problem where when I'm on safari i get these virus pop ups asking me to down load this and that and i don't know how to make them stop.

Click here and run Adware Medic.
(113236)

I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

Mac App Store- Hiding and unhiding purchases

Hi! Since I installed Mavericks, all the messages in mail I receive are marked as read, when they're not! Can anyone explain to me how to make them appear as not read, so I notice them? Thank's

Hi! Since I installed Mavericks, all the messages in mail I receive are marked as read, when they're not! Can anyone explain to me how to make them appear as not read, so I notice them? Thank's

I don't know if it will work, but try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox

Hint captions - how to make them work

Hello all,
Can someone shed light how to make hint captions work? I created a training progect with all default options - it generates all four caption: Text, success, failure and hint.
The problem is that hint captions are not shown when hoovering over the clickbox area... in fact they never show up whatever i do.
Am I missing something obvious here?
Thanks!

OK. Thanks.
Now do one more thing: Select the click box object that you can see in this example and from the Modify menu item, click Arrange > Bring to Front. Then republish and test.
This is a bit of a long shot, but what I'd checking for here is that there is a known issue in Cp 5x where sometimes an object is shown as being at the top level layer in the timeline when in fact it may be several layers deep. So your click box might actually be underneath another object and thereby NOT seeing the mouseover to trigger the Hint caption.

I have greyed out songs on my ipod and i dont know how to make them come back on my ipod and it wont work from my itunes library to my ipod

I need to know how to make greyed out some songs turn bold. I have tried from my itunes library to my ipod but it still wont work. Can anyone help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

ICC file associated with photoshop process on Windows, how to make them not associated?

In my code, an ICC profile is created and copy to the system folder (C:\Windows\System32\spool\drivers\color)
then assign this profile to current document in photoshop using sPSActionControl->Play(&result, StringToKey("assignProfile"), iDescriptor, mode); // iDescriptor contains the ICC profile name
after assigning profile, the .icc file is associated with the ps process, that is, I can't delete it or rename it, nor can I replace it with another file having the same name. But on Mac, the ICC file won't be associated with the process, so I can overwrite the icc file and do other work, that's better.
How to make the icc file not taken by photoshop after assigning profile on windows?

what i finally did to go around this problem was to make another user on my computer and only download podcasts. just as long as you don't hook the ipod up in this new profile, you should be fine

I scanned color document - how can make them smaller by Distiller

Dear friends,
I scanned documents and saved them as pdf format ....and everything was ok....but now i have many documents and my hard disk is full now because i was scanning documents as color not black & white ( that's my fault I must scan document as black & white ).
now i am thinking to use Acrobat Distiller to make documents smaller .
I opened the document and printed it using distiller but the output still big.
how can I make files smaller ....please help me
thank you very much
Al

Don't fret; it's easy to compress files in Acrobat! Just go to Advanced > PDF Optimizer. Tick Images and reduce the compression quality, making sure JPEG has been selected.

Path branching game, choices, how to make them work?

Basically, I want to make a simple frame by frame path branching game. The problem is that I know that writing in and filling in EVERY FRAME going all along for EVERY CHOICE PATH would be an insanely tedious amount of work.
My basic project is reminiscent of japanese visual novels, and I've been looking for turtorials to help me with this style of role playing games, but all of the tutorials concentrated on the adventure RPGs. :\
Being a novice at Actionscript, past working buttons to make it go to the next frame and stopping it, I was wondering if its possible to make a choice you make earlier in the game affect it later. Such as, you keep following the game normally afterwards, but depending on your choice you'll go to a different scene later.
basically, this way I'd like to eliminate the need to make two duplicate paths with only minor variances to show the changes for some choices.
Another thing that I would like to know if its possible to do, though this is less important, as I have yet to look for these things and I'm sure I can find them but.... a save/load system, easy to find I'm sure. And an unlocking system. Something so that once they hit a certain CG I can unlock it in a 'memories' menu on a main screen.
I know my questions seem to be rare, but does anyone know how to accomplish this and can explain it in a way that even an actionscript noob like me can understand?

I see. Thanks for the advice. My only problem is that depending on what i can do, I may need to write the script differently. All I need to be able to do is say, a person clicks a button that changes their frame to this one part of the story, then it returns to the normal story you see no matter what, is that later on, when it hits a certain point the flash can tell which choice he made and depending on that choice, display a different scene.
Possibly even depending on a number of choices. I dont know actionscript or anything, but the simplest way i can think to do this would be if it were possible to make a value, then have it change depending on the choice a person makes. Only... As far as I can tell, i cant find such a function on CS3. An example may be... A value names 'Player Choice 1' Then have it so that when the player gets to chat choice and picks an option, the number for the option is set as the value. Such as...
If player chooses 1, the value is set to one.
Obviously this would mean the button for the first option would need the script to also change this value, provided such a value can be made. I've looked at a lot of beginners tutorials and nothing tells me even the beginnings of how I can make this. :/ I just need a point in the right direction.

How do I set it up to remember my passwords on certain sites if I said no by accident? the tab only allows me to adjust the ones saved. I need to know how to make them if I didn't do so the first time

I accidently did not save the passwords to some sites I would like to have the password remembered. I went in to try to maybe reset it so that the pop up window would come up again. but it won't let me do it again. How do I get the password to be remembered so I can stay logged in to the specific sites I want to be. I sure hope that made sense.
Thanks for your help
Christina

Also, please try deleting the sites in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Security''' > '''Exceptions...''' (under '''Passwords'''). The sites listed there are those for which Firefox will never remember passwords.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

Mp4 videos on my new bb 8330 curve do not play. How to make them play ?

I bought a new blackberry 8330 curve last week, but most of the mp4 videos that I had and play great on my palm centro, will not play at all on my new bb 8330. When trying to play them they either cause the player to blink and green "loading" to flash at top right of player screen but never play, or more often they dont play file while giving error message " An error has occurred attempting to play media".!
Anyone know why this happens. How to fix?
And everytime I click "enter" button to try to create space here typing in this forum post it bugs out and takes cursor to top of page, instead of doing what every normal enter command does by creating space below.
Also fix the stupid blocks to posting messages not allowing simple things like "to", "has" ..etc in tags and tiny limit to title subject.

First read this: Adding additional media format support to Quicktime:
http://support.apple.com/kb/HT3526
Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them), particularly any DivX extension to Safari. However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/en/software/mac/player

MapIDs - How to make them the same as the Filename.htm?

Hi All,
I'm fairly new to Robohelp, hoping the experts can take it easy on me!
We're in the process of converting our old WinHelp projects to Microsoft HTML Help projects. We previously had 10 separate .HLP files for our project, we're hoping to condence all of those into a single CHM file.
In our previous projects, our MapIDs were as follows from the .HH file:
#define HELP_Add_Cables    6171
#define HELP_Add_Column    6181
#define HELP_Add_Control_Unit    6537
#define HELP_Add_Copy    17043
etc.
After converting our projects from WinHelp->MS HTML Help, each one of these topics created a new HTM file, ie: "Help_Add_Cables.htm", fine, no problem. But when I bring up the "Edit Map IDs" dialog, its now showing me the Topic ID ("How to Add Cables"), and not the HELP_XXX_XXX name that is used throughout our product. As a result, we would have to go through our source code and update approximately 1000 Map IDs - yuck!
Is there a way to force this dialog to use the Filename, and not the Topic Name to generate the .h file? Is there some fancy editing I can do in Ultraedit instead of using Robohelp to get the result I want?
I notice there is an alias file as well, that appears to correspond between the Topic Name, and the .HTM Filename.
We were previously using Robohelp 5.xx, and recently upgraded to 8.0.1.204.
Anyhelp you could provide would be greatly appreciated.
Cheers.
Mike.

Hi,
I created a small RH script that quickly assigns TopicId's and mapnumbers to your topics, based on the filename. Hope it helps.
First, the script adds a map file called 'RHScriptMapFile'. No checks whether it exists or not.
Then, creates a TopicId for each topic based on the file name. It just strips the '.htm' from the filename and replaces spaces in the name with underscores. A sequential mapid is added. The script is nothing fancy, but I hope it shows how you can quickly create a script that will save you from changing a thousand id's by hand.
CreateContextSensitivity();
function CreateContextSensitivity() {
   var MapManager = RoboHelp.project.MapIdManager;
     var MapfileName = 'RHScriptMapFile';
     MapManager.newMapFile(MapfileName);
     MapManager.setCurMapFile(RoboHelp.project.path+'\\'+MapfileName+ '.h');
     var topicmanager = RoboHelp.project.TopicManager;
     for(var i=1;i<=topicmanager.count;i++)
          topic = topicmanager.item(i);
          var TopicId = GetTopicId(topic);
          MapManager.newMapId(TopicId, i);
          MapManager.assign(TopicId, topic.path);
     alert('Context sensitivity created in map file '+MapfileName);
function GetTopicId(topic) {//Get the topic id based on the filename
     var FileEnd = /\.htm/g;//Strip .htm from the filename
     var Forbidden = /( )/g;//Strip forbidden characters from the filename.
     var ID = topic.filename.replace(FileEnd, '');
     return ID.replace(Forbidden, '_');
Greet,
Willam

I downloaded itunes on my new laptop and in my library was a bunch of music. Some of the things listed are things that I have bought in the past, but none of it is clickable or playable. I dont know where they came from, or how to make them playable.

I used to have itunes on other computers, but had to download it on my laptop. I havent had itunes in years. When i finished downloaded it, in my library is a bunch of music...but they are gray and i cannot click on anything. I dont know how to fix this.

Media is only where the user puts it.
Installing iTunes does not and has never caused media to magically appear on the computer.
Copy the ENTIRE iTunes folder from the old computer (or backup of the old computer) to the new computer.

My e-mails are coming in so small that I am unable to read who they are from. How to make them larger? Also, my compose bar is scrunched up so bad that I can't

My compose bar is so scrunched up that I am unable to click on it to send an e-mail. This has just happened within the last month or so. How to fix this, please.

Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
You can find more information about the zoom features Firefox offers in these articles:
[[Text zoom]] - For zooming text only
[[Page zoom]] - For zooming the whole page (including images etc.)

Internal Requisitions - how to make them systematic

Similar Messages

Maybe you are looking for