Internal sb 1394 cab

I have a problem..... Actually I don't know if i have a problem....
I've had this sb audigy platinum sound card for fi've or six? years... and now? I just bought a new pc and I personally? trasfered the sb audigy? front panel? and the card to my new pc..
?
I discovered that? my unit does not have an to conect the front panel to the card at the back .. I also couldn't find? the internal digital cd audio cable... my computer guy who installed this to my old pc didn't seem to bother to mention to me that these cables weren't present.
?
Now? I plan to use a mixer which will connect to my computer via firewire.....
I never had problems with? my audigy since i never really used the firewire port before..
?
the main question is. will the two? fire wire ports ( the one ont front panel and the one on the card itself) work without the internal sb 394 cable?
?
the second question is? if the ports won't work without the cable... then where can I get an internal sb audigy 394 cable?
?
the third? question is ... the digital cd audio cable is also missing.... what is this cable for?... my unit seems to be working even without it. can I purchase that sort of internal cable separately? what is it for?
?
my third question is this card capable of recording audio? at 24 bits and allow a sampling rate of? 96 khz?
?
My card is an sb audigy platinum card its remote control has
creative rm-900 printed on it. the ports are gold plated but the daughter card only has a joystick port.
?
so all in all it only has two firewire ports. ( on the front panel and on the card itself)
?
?I really don't know where to get help about these things, I? would? very much appreciate hearing your sound educated advice.
thank you very much.

Hi everyone:
Not sure what it was, but while I was awaiting a reply (Which we all know by now never came), I disabled the remaining drivers for the Audigy & the drival for the 24-Bit External SBs and reinstalled the ones for the Audigy and after some double-checking, both SBs seem to work just fine now.
Weird....
Cheers
Pat Cook
Denver, CO?

Similar Messages

Sb 1394 internal cab

I have a problem..... Actually I don't know if i have a problem....
I've had this sb audigy platinum sound card for fi've or six? years... and now? I just bought a new pc and I personally? trasfered the sb audigy? front panel? and the card to my new pc..
?
I discovered that? my unit does not have an internal sb 394 cable to conect the front panel to the card at the back .. I also couldn't find? the internal digital cd audio cable... my computer guy who installed this to my old pc didn't seem to bother to mention to me that these cables weren't present.
?
Now? I plan to use a mixer which will connect to my computer via firewire.....
I never had problems with? my audigy since i never really used the firewire port before..
?
the main question is. will the two? fire wire ports ( the one ont front panel and the one on the card itself) work without the internal sb 394 cable?
?
the second question is? if the ports won't work without the cable... then where can I get an internal sb audigy 394 cable?
?
the third? question is ... the digital cd audio cable is also missing.... what is this cable for?... my unit seems to be working even without it. can I purchase that sort of internal cable separately? what is it for?
?
my third question is this card capable of recording audio? at 24 bits and allow a sampling rate of? 96 khz?
?
My card is an sb audigy platinum card its remote control has
creative rm-900 printed on it. the ports are gold plated but the daughter card only has a joystick port.
?
so all in all it only has two firewire ports. ( on the front panel and on the card itself)
?
?I really don't know where to get help about these things, I? would? very much appreciate hearing your sound educated advice.
thank you very much.


I have a problem..... Actually I don't know if i have a problem....
I've had this sb audigy platinum sound card for fi've or six? years... and now? I just bought a new pc and I personally? trasfered the sb audigy? front panel? and the card to my new pc..
?
I discovered that? my unit does not have an internal sb 394 cable to conect the front panel to the card at the back .. I also couldn't find? the internal digital cd audio cable... my computer guy who installed this to my old pc didn't seem to bother to mention to me that these cables weren't present.
?
Now? I plan to use a mixer which will connect to my computer via firewire.....
I never had problems with? my audigy since i never really used the firewire port before..
?
the main question is. will the two? fire wire ports ( the one ont front panel and the one on the card itself) work without the internal sb 394 cable?
?
the second question is? if the ports won't work without the cable... then where can I get an internal sb audigy 394 cable?
?
the third? question is ... the digital cd audio cable is also missing.... what is this cable for?... my unit seems to be working even without it. can I purchase that sort of internal cable separately? what is it for?
?
my third question is this card capable of recording audio? at 24 bits and allow a sampling rate of? 96 khz?
?
My card is an sb audigy platinum card its remote control has
creative rm-900 printed on it. the ports are gold plated but the daughter card only has a joystick port.
?
so all in all it only has two firewire ports. ( on the front panel and on the card itself)
?
?I really don't know where to get help about these things, I? would? very much appreciate hearing your sound educated advice.
thank you very much.

Itunes Error Internal Error 2356.Data1.Cab

Hello everyone. I keep on getting this error everytime i try to install itunes. The error is Internal Error 2356.Data1.Cab. I have no idea on how to fix it and hope someone can help me. Thanks
Emachines T2642 Windows XP

let's try getting an itunes 7 installer log to the Apple Engineers for that one.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

[q] CAB for International JRE?

Hello,
I want my users to download the international JRE so
a user can select a Locale other than US_english.
How would I do this?
F.E. The HTML I use is something like:
if (_ie == true)
document.writeln('<OBJECT classid="clsid:CAFEEFAC-0014-0001-0000-ABCDEFFEDCBA" width="2" height="2" codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_1-windows-i586.cab#Version=1,4,1,0"><NOEMBED><XMP>');
else if (_ns == true && _ns6 == false) document.writeln('<EMBED type="application/x-java-applet;jpi-version=1.4.1" CODE = "Init.class" ARCHIVE = "Init.jar"
WIDTH = "2" HEIGHT = "2" scriptable=false pluginspage="http://java.sun.com/products/plugin/index.html#download"><NOEMBED><XMP>');
Can I change the cab and/or clsid to download the JRE with all language
support? Without this, it should be obvious that i18n is impossible...
Thanks.

The following is currently working for us to get the "all languages"/i18N CAB for 1.4.1_01, whilst allowing any Plug-in from 1.3.1 upwards to be used, if already installed:
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,3,1,0"
width="100%" height="100%">
This is the "hypothetical" URL documented in:
http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/using_tags.html
Dumping the system properties ('s') in the Java console shows, for example, "user.country=GB", which is correct in my case. I certainly hope the resulting Plug-in installation is Internationalised!
However we have some other problem with CAB URLs, as noted for example at:
http://forum.java.sun.com/thread.jsp?forum=30&thread=333219
Cheers.

Internal memory error using IMAQ 1394 ver 2.0

Hi Robert,
I apologize for the much belated response to your e-mail.
- When I was receiving the fatal memory error I was using the GRAB vi
to acquire the data. The problem seems to go away if I switch to
the SNAP acquisition method.
- I am not using the IMAQ vision FFT vi, I am using the FFT Spectrum vi.
- When the image acquisition code is removed I ran the FFT on simulated
data generated within the program not loaded from a stored file.
Thanks,
Ronen
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, August 01, 2005 8:20 AM
To: Feldman, Ronen (Contractor)
Subject: Re: (Reference#7084698) Phone Support E-Mail
Hi Ronen,
My name is Robert and I am one of National Instruments' IMAQ and Vision
supporters. Eric has forwarded me your email regarding the error
you are receiving as it looks like the problem may be related to the
image acquisition side of things.
In your last email, you noted that the fatal error does not occur if
you remove the FFT code or if you remove the IMAQ code. I was
hoping you could describe for me a couple of things in greater
detail. 1) In your typical code configuration, do you acquire
with a GRAB?
2) The FFT code that you mention, are you using IMAQ FFT VIs from the Vision Development Module?
3) You said if you remove the image acquisition code the program runs
fine. Does this mean that you are running your code on an image loaded
from file?
These answers should help us get to the bottom of the situation.
Additionally, how large is your program? Are all of the various
parts subVIs?
Regarding your other question, data parameters like those that you
mentioned can be changed during program execution, but those changes
are not saved to the camera's configuration file. If you make
these changes through the Measurement and Automation Explorer the
camera configuration file will be updated. This behavior is to
protect the configuration files from being corrupted by the program you
run.
Hope this helps. Let me know how things go with the IMAQ/FFT code.
Regards,
Note: Your reference number is included in the subject field of
this message. It is very important not to remove or modify this
reference number, or your message may be returned to you.

Hi Ronen,
I guess using the forums works for me too! I'm just glad I found it
To clarify, you are first acquiring with a Grab (does not work) or snap (works fine) and then performing an Image to Array. After Image to array you use the intensity information within the FFT Spectrum.vi? When the program errors out, do you know which step you are running?
In addition, you should be able to whittle the program down to just these basic steps, and see if the error continues to occur. If the problem you are having can be consistently reproduced with these three or four steps, I would be interested in seeing if I can reproduce the problem here.
Regarding one of your other questions, changes made to the camera configuration file from Labview will not be permanent. This is to avoid the possible hazard of overwriting the file with a non working configuration.
Hope this helps,
Robert

Internal error 2356 Data1.cab

I have search the net and not found an answer to this I have done everything I have found and still I can not install itunes on my window xp I am getting ready to return the ipod and get something else already

Try logging in as the user titled "Administrator", not just a user with administrator privileges. Sometimes Windows errors when a user just has admin privileges, but will work with the actual Administrator user.

Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001 - SCCM 2012 R2 Client Deployment

Hi All,
I installed SCCM 2012 R2 one primary site from one of our customer & using SQL 2012 SP1 DB at the back-end.
Facing Issues while deploying agent from one of our client machine - OS - window 7 Professional Sp1:
==========[ ccmsetup started in process 3828 ]==========
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Running on platform X86 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Updated security on object C:\Windows\ccmsetup\cache\.
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Launch from folder C:\Windows\ccmsetup\ ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
CcmSetup version: 5.0.7958.1000 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Successfully started the ccmsetup service ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
In ServiceMain ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
332 (0x014C)
CcmSetup is exiting with return code 0 ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
SslState value: 224 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPPORT: 80 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSPORT: 443 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSSTATE: 480 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSCERTNAME: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
FSP: SCCM.MYDOMAIN.COM ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMCERTISSUERS: CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
CCMFIRSTCERT: 1 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Retry time: 10 minute(s)
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI properties: INSTALL="ALL" SMSSITECODE="PRI" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="480" FSP="SCCM.MYDOMAIN.COM" CCMCERTISSUERS="CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM"
CCMFIRSTCERT="1" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Source List: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MPs: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
SCCM.MYDOMAIN.COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
No version of the client is currently detected.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Attempting #1 retry. Max 5 retries. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Updated security on object C:\Windows\ccmsetup\.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='100'.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment '
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:37 PM 1480 (0x05C8)
Running as user "SYSTEM" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Detected 69650 MB free disk space on system drive.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Checking Write Filter Status. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
This is not a supported write filter device. We are not in a write filter maintenance mode.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=PRI))'
ccmsetup 25-02-2014 02:20:38 PM
1480 (0x05C8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=MYDOMAIN-CA-CA;
DC=MYDOMAIN; DC=COM</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>PRI</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=PRI</CommandLine> </CCM><FSP> <FSPServer>SCCM.MYDOMAIN.COM</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="MYDOMAIN.COM" /><Forest Value="MYDOMAIN.COM" /></ClientOperationalSettings>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
The MP name retrieved is 'SCCM.MYDOMAIN.COM' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
MP 'SCCM.MYDOMAIN.COM' is compatible ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Retrieved 1 MP records from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Retrived site version '5.00.7958.1000' from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
SiteCode: PRI ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
SiteVersion: 5.00.7958.1000
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Only one MP SCCM.MYDOMAIN.COM is specified. Use it.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Searching for DP locations from MP(s)... ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD site of machine is Default-First-Site
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Local Machine is joined to an AD domain LocationServices
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD forest name is MYDOMAIN.COM, domain name is MYDOMAIN.COM
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
DhcpGetOriginalSubnetMask entry point is supported.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Begin checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Finished checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {95A6D3CE-4F28-4E55-A29A-FF3F1A317C61} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {6024AB68-EB5E-4370-BD9E-8B2CEFE261A8} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="PRI"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site"/>
<Forest Name="MYDOMAIN.COM"/>
<Domain Name="MYDOMAIN.COM"/>
<IPAddresses>
<IPAddress SubnetAddress="10.0.0.0" Address="10.10.10.192"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{F6331322-941A-4E44-974F-A755B1B016A4}</ID><SourceHost>POOJASETHI</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:POOJASETHI:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.MYDOMAIN.COM</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1126"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CCM_POST 'HTTP://SCCM.MYDOMAIN.COM/ccm_system/request'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received header '<Msg SchemaVersion="1.1">
<ID>{14ADB6F1-95C1-4EEF-B8BA-16CD020ACFCF}</ID>
<SourceID>GUID:526CE573-6351-407E-AC2A-2C3927979AD9</SourceID>
<SourceHost>SCCM</SourceHost>
<TargetAddress>direct:POOJASETHI:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<Capabilities><Property Name="SSL" Version="1"/></Capabilities><ReplyCapabilities><AllowRegistrationReset>direct:SCCM:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>POOJASETHI</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>https</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="3494"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">SCCM;SCCM.MYDOMAIN.COM;</Property><Property Name="MPSiteCode">PRI</Property></Hook></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="PRI" MasterSiteCode="PRI"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite
Name="Default-First-Site"/><IPSubnets><IPSubnet Address="10.0.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCM.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord><LocationRecord><URL
Name="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite Name="Default-First-Site"/><IPSubnets><IPSubnet Address="172.16.10.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMDMZ.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="1"/><Locality>FALLBACK</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="PRI00003" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30354761;897103744" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found local location 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found remote location 'http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Discovered 1 local DP locations. ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
PROPFIND 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Using DP location http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='316'.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment Error 0x80004005. Pre-req file name: C:\Windows\ccmsetup\ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to extract manifest cab file with error 0x80004005. Try next location.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'HTTP://SCCM.MYDOMAIN.COM/CCM_Client/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CcmSetup failed with error code 0x80004005
ccmsetup 25-02-2014 02:20:39 PM
284 (0x011C)
Please let me know any solution or workaround for this
Thanks Rahul$

Hi,
The client cannot verify the signature of ccmsetup.cab. I suggest you check the Trusted Root Certification Authorities in certificate store on the client to see whether a certificate is missing.
Try to enable verbose logging for SCCM client installation. Then check the log to see whether there are some useful information.(http://technet.microsoft.com/en-us/library/gg699356.aspx)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Any way to tap into USB internally in a Mac Pro?

I have a 2008 quad-core (not a 8-core, mine's a "CTO") Mac-Pro. An outfit called Koutech Systems makes 8-port RS-232 PCI-e cards. Problem is, it needs to tap into a USB header-pin connector on the mother board, or plug into an internal USB port. I think it grabs power from the PCI-e bus, and converts the usb serial into RS-232 serial (I know the card shows up as a usb device in system profiler). Is there a way to gain access, internally, to a USB port, and if so, how?

Kinda hate to have to buy a 5-port USB PCI-e card when I already have numerous unused USB ports on the outside. There is a (not easily accessible - ya' gotta pull the front panel fans to get to it) pin-header connector on the motherboard that is labeled "FP-USB" so I'm guessing that means "front panel USB" -- it goes to a small PCB that has the front panel USB and firewire connectors on it -- I wonder if I could hijack that, at the expense of rendering the two(?) (not sitting in front of that computer at the moment) front panel USBs inoperative, but not affecting anything else on that PCB (i.e., the 1394 FW ports or the audio port)?

ORA-00600: internal error code, arguments: [upsRowVec4] in oracle 11g R2

Hi
Getting ORA-00600: internal error code, arguments: [upsRowVec4] error while executing merge statement in oracle 11gR2
MERGE INTO app_mast_out OUT USING
(SELECT
/*+index(ip75) index(out1)*/
DISTINCT ip75.cab_type,
out1.rowid rw
FROM app_mast_ip0075t1 ip75,
app_mast_out out1
WHERE OUT1.de026 = SUBSTR (ip75.mcc, 2, 4)
AND deleted ='N'
AND OUT1.PROCESS_ID ='B14.280410.0367'
) cab ON(OUT.PROCESS_ID='B14.280410.0367' AND out.rowid=cab.rw)
WHEN MATCHED THEN
UPDATE SET out.CAB_TYPE=cab.cab_type
trace file output
Incident 8907 created, dump file: /u01/app/oracle/diag/rdbms/geni11g/geni11g/incident/incdir_8907/geni11g_ora_19900_i8907.trc
ORA-00600: internal error code, arguments: [upsRowVec4], [], [], [], [], [], [], [], [], [], [], []
incident trace file output
Dump continued from file: /u01/app/oracle/diag/rdbms/geni11g/geni11g/trace/geni11g_ora_19900.trc
ORA-00600: internal error code, arguments: [upsRowVec4], [], [], [], [], [], [], [], [], [], [], []
========= Dump for incident 8907 (ORA 600 [upsRowVec4]) ========
*** 2010-04-28 13:22:56.245
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=8ccz9u3h32tq7) -----
MERGE INTO APP_MAST_OUT OUT USING (SELECT /*+index(ip75) index(out1)*/ DISTINCT IP75.CAB_TYPE,OUT1.ROWID RW FROM APP_MAST_IP0075T1 IP75,APP_MAST_OUT OUT1 WHERE OUT1.DE026 = SUBSTR (IP75.MCC, 2, 4) AND DELETED='N' AND OUT1.PROCESS_ID=:B1 ) CAB ON(OUT.PROCESS_ID=:B1 AND OUT.ROWID=CAB.RW) WHEN MATCHED THEN UPDATE SET OUT.CAB_TYPE=CAB.CAB_TYPE
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
0x1a38469d8 86 procedure FINTECH.SPR_MAST_OUTFEE_DATA
0x1a4ac12b0 388 procedure FINTECH.SPR_MAST_OUTLEGACYCATEGORIZE
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
skdstdst()+36 call kgdsdst() 000000000 ? 000000000 ?
7FBFFE41B8 ? 000000001 ?
7FBFFE86B8 ? 000000000 ?
ksedst1()+98 call skdstdst() 000000000 ? 000000000 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
ksedst()+34 call ksedst1() 000000000 ? 000000001 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
dbkedDefDump()+2736 call ksedst() 000000000 ? 000000001 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
ksedmp()+36 call dbkedDefDump() 000000003 ? 000000002 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
ksfdmp()+64 call ksedmp() 000000003 ? 000000002 ?
7FBFFE41B8
please give the solution as it is live environment

Hi,
how does a update work? I see now a merge with only an update, so you can rewrite it to an update statement. And you don't need the distinct, rowid makes it already unique.
Herald ten Dam
htendam.wordpress.com

[SOLVED]Laptop Internal SD card reader no longer working

Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues. Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card. I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either. Here are all my logs that I could think of to post for any advice:
uname -r
3.9.8-1-ARCH
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
lsusb
Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
|-sda1 8:1 0 9.3G 0 part /
|-sda2 8:2 0 63.3G 0 part /home
`-sda3 8:3 0 1.9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f2f32
Device Boot Start End Blocks Id System
/dev/sda1 * 63 19535039 9767488+ 83 Linux
/dev/sda2 19535040 152296199 66380580 83 Linux
/dev/sda3 152296200 156301487 2002644 83 Linux
dmesg | tail
[17198.557922] mmc0: new SDHC card at address aaaa
[17535.391900] mmc0: card aaaa removed
[17537.984043] mmc1: new SDHC card at address aaaa
[18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[18199.855227] mmc1: card aaaa removed
[18221.345032] usb 4-1: USB disconnect, device number 3
[18473.771242] mmc1: new SDHC card at address aaaa
[20787.874847] mmc1: card aaaa removed
[21102.784624] mmc1: new high speed SDHC card at address e624
[21119.691467] mmc1: card e624 removed
It seems I have all the necessary information, but I am not sure where to go from here. It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it. It's listed under lspci but not under lsusb. I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again. Thanks for any help you guys have.
Last edited by coolcashews (2013-07-06 00:32:55)

Thanks for your quick reply. Here are the logs you asked for:
lsmod | grep mm
mmc_core 94486 2 sdhci,sdhci_pci
usb_common 954 1 usbcore
pacman -Qi linux
Name : linux
Version : 3.9.9-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.9.9
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65511.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed Jul 3 16:00:01 2013
Install Date : Fri Jul 5 11:31:57 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

New HDD, purchased recovery material, recovery Faliure, CAB file HP_SSRD_LOG.CAB is corrupt

Hello,
The Hard Drive failed and I purchased a new one. Purchaed recovery (DVD) disks. Have tried twice to recover and in each occuance recieved the error recoevery Failed.
How do I create a PIN-log
[13:18:01.07] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[13:18:01.07] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[13:18:01.08] ------------------------------------------------------------------------------------------
[12:14:51.87] Start BBOffline.cmd...
UPDrv=[C:]
[12:14:51.87] Set UIA Error Code to 951
[12:14:52.17] Delete [FBI] folder.
[12:14:52.19] WinPE is 64bit.
[12:15:16.65] Starts [FixUps].
[12:15:16.69] ---------------------------------------------------------------------
[12:15:16.69] FixUps.cmd...
[12:15:35.03] FixUps.cmd completed...
[12:15:35.05] ---------------------------------------------------------------------
[12:15:35.05] Starts [Tweaks for SSRD].
[12:15:35.07] ---------------------------------------------------------------------
[12:15:35.07] SSRD Tweaks to change user default locale...
[12:15:35.07] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[12:15:35.25] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US ".
[12:15:49.73] ---------------------------------------------------------------------
[12:15:49.74] Launch PININST.exe for Offline ...
[12:17:10.23] Starts [Sleep 10 sec].
[12:17:20.31] Starts [Create RStoneFUpdate.INI].
[12:17:21.41] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is AE90-CC9C
Directory of C:\System.sav\bbv
01/23/2015 12:17 PM     1,073,741,824 pagefile.sys
               1 File(s) 1,073,741,824 bytes
               0 Dir(s) 35,020,972,032 bytes free
[12:17:21.64] Brand detection.
[12:17:21.86] Customize error handling for Specialize ~ BBV1.
        0 file(s) copied.
[12:17:21.88] ---------------------------------------------------------------------
[12:20:21.77] Check Win 8 configuration...
[12:20:22.78] Check system ID...
[12:20:23.82] Check OS SKU...
[12:20:24.83] Check option code...
[12:20:25.92] Check brand name...
SKU_DEF_COUNTRY=[244]
SKU_DEF_SYS_LOC=[en-US]
Reset country in administrator...
Reset country in Default user...
Reset System locale
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
Reporting offline international settings.
Default system UI language : en-US
System locale : en-US
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : United States (GEOID = 244)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info...
[12:20:43.98] Start PIN Tweaks...
[12:20:45.00] ---------------------------------------------------------------------
[12:20:45.02] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[12:20:45.02] ----------------------------------------
[12:20:45.02] Tweaks for OOBE's Unattend.xml
[12:20:45.02] to pick up the proper file...
[12:20:45.02] ----------------------------------------
[12:20:45.02] rename unattend.org to unattend.or_
[12:20:45.06] ----------------------------------------
[12:20:45.06] without Light Sensor..
[12:20:45.09] ----------------------------------------
[12:20:45.10] This is Restored image by SSRD [SSRD.flg]...
[12:20:45.12] ---------------------------------------------------------------------
[12:20:45.99] Start MIR Tweaks...
[12:20:47.03] ---------------------------------------------------------------------
[12:20:47.03] [MIR Tweaks] ...
[12:20:47.03] ---------------------------------------------------------------------
[12:20:48.00] Start Factory Update(s)...
[12:21:55.10] Start QFE Offline installation...
[13:18:00.80] PININST_OFF: PASSED...
[13:18:00.88] Type C:\System.sav\Logs\BBFindEr.log...
[13:18:00.89] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[13:18:01.05] Found some error at QFE Offline installation...
[13:18:01.05] Check C:\System.sav\Logs\BBFind4QFE.LOG to see which QFE got the issue...
[13:18:01.07] Check C:\System.sav\Logs\QFEOff\KBxxxxx.log.txt to see the detail...
upon further investigation
Extracting to "C:\Users\dwalke\AppData\Local\Temp\wz876d\"
Use Path: yes   Overlay Files: yes
The operation completed successfully.
Extracting CTOERROR.flg
The operation completed successfully.
CAB file HP_SSRD_LOG.CAB is corrupt

@Oregondeere
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
Cheers,
KarolB
I work for HP

Wsusscn2.cab file does not contain information of the Bulletins released in November.

MS released 16 new bulletins this November on Patch Tuesday.
However all our attempts to acquire any of the new patches failed.
Our initial investigation shows that information for these bulletins has not been added to wsusscn2.cab . we are completely dependent on this file for all the bulletin information and at this moment it appears that this cab file
has not been updated with the latest information. Extraction of the cab file shows that the last updated date if the internal files is 27th/28thOctober.
There is a package.xml file in the cab and that file would normally contain URL’s for the new patches.
I noticed the year and the month url’s only up until the last month. There are no entries for the month of November. Hence the patch acquisition cannot find information related
to the new bulletins

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

[SOLVED] Settings for Internal Microphone in Macbook Pro 6,2

So, I have read the alsamixer page on the Arch Wiki and Macbook specific pages and I have still been thrown for a loop.
[me@laptop ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
[b]00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)[/b]
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
04:00.0 FireWire (IEEE 1394): LSI Corporation FW643 [TrueFire] PCIe 1394b Controller (rev 08)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
And here is the output from aplay.
[me@laptop ~]$aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[me@laptop ~]$ man aplay
[me@laptop ~]$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=MID
HDA Intel MID, CS4206 Analog
Default Audio Device
sysdefault:CARD=MID
HDA Intel MID, CS4206 Analog
Default Audio Device
front:CARD=MID,DEV=0
HDA Intel MID, CS4206 Analog
Front speakers
surround40:CARD=MID,DEV=0
HDA Intel MID, CS4206 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=MID,DEV=0
HDA Intel MID, CS4206 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=MID,DEV=0
HDA Intel MID, CS4206 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=MID,DEV=0
HDA Intel MID, CS4206 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=MID,DEV=0
HDA Intel MID, CS4206 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=MID,DEV=0
HDA Intel MID, CS4206 Digital
IEC958 (S/PDIF) Digital Audio Output
I needed to make a Skype call and I could not figure which device is the input/capture device, and I want to use the internal mic as the capture device, not an external component. When I open up alsamixer, and look at the capture devices, I am concerned because I notice the following.
My current alsamixer settings
Can anyone clue me into which one is the one I should unmute and set up? I have played around with Audacity for a while changing these and I am just spinning my wheels.
Last edited by ajstein (2014-06-28 09:16:18)

WonderWoofy wrote:You need to use code tags instead of quote tags for things like... code.
I usually use code blocks for code, not command output. But I will follow conventions.
In any event, I am having one of the weeks. It appears I need set up the appropriate modprobe config to specify my sound device type. With root, do the following.
echo options snd-hda-intel model=mbp55 > /etc/modprobe.d/mbp62-sound.conf
I found other model information, but found using 5,5 settings works for MacBook Pro 6,2 laptops through searching generally through other distro docs and found this for Gentoo.

Data1.cab file cannot be used

I was just given my daughters Ipod since she got a new one and am trying to load the software and get that the data1.cab file can not be used, it says it could be a network error, an error reading from the cd or a problem with this package, I than said to retry and got the same message, than said to ignore it and got internal error 2350 and than error1603
Can anyone tell me what to do.

let's try getting an itunes 7 installer log to the Apple engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Error 1335 iPod.cab is corrupt

When trying to install iTunes 6, I get the following error:
iTunes Error: Error 1335. The cabinet file 'iPod.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
Abort, Retry, Ignore
I've attempted to download this installer mulitple times. I even tried downloading it from a seperate NIC since I saw one guy had an nvidia firewall issue. I am attempting to install it from my desktop folder and I'm also on the administrator profile on this PC. I'm running WinXP SP2. No firewalls up.
I've tried the Microsoft Cleanup utility, but itunes nor quicktime were listed. I've deleted all reg keys associated with apple. My system is totally void of all Apple related installations.
I tried to install the iPod software seperately and succeeded. If I hit retry a few times, the progress bar goes all the way across before I have to hit ignore. I then get a white x with a red circle saying Internal Error 2350. The installation rolls back and another message comes up.
Error: -1603 Fatal error during installation.
Consult Windows installer help (msi.chm) or MSDN for more information.
I'm at a loss.

I finally figured it out. All those temp directories in the other posts don't get down to the solutions.
First, I have a built in nvidia firewall on one of my nics. I switched nics and redownloaded the itunes installer. I then went to the properties of the installer.
If you look at the comments of the installer, you may see something like this:
Setup=iTunesSetup.exe
Silent=2
Path=.\%windir%\Downloaded Installations\{872653C6-5DDC-488B-B7C2-CF9E4D9335E5}
Overwrite=2
So, I went to my c:\windows\downloaded installations\ folder and deleted that folder that started with 872..
Since I did that, the installer went through like nothing else.
iTunes is now working and installing successfully. I hope this helps for anyone else.

Internal sb 1394 cab

Similar Messages

Maybe you are looking for